HP Elite m9150f - signal VGA No.

Similar Questions

• I have a Pavilion Elite M9150F and it seems that the ignition button does not work. The power light is on

  My Pavilion Elite M9150F P/N KC880AA-ABA running Windows Vista Home Premium 32 bit. The device turns on no switch or remote control. He lite is turned on and power is running through the unit until button (checked through AC voltage detector) are there known issues with these? Are there spare parts? It doesn't hang or move the last time it was turned on. What are my options? Thanks for any help.

  Hello cello6996
  
  You are in warranty? If so, I would suggest contacting HP. If you are out of warranty, follow the steps below.
  
  How does a power button is essentially that it shorts two special pins. This short film is a signal to the power on the power supply and all components. A quick Google search reveals the most common method to do this is to disconnect the wires to the pins on the motherboard power button and then tap a screwdriver against just these two pins. Use gloves as a precaution. or a screwdriver with an insulated handle.
  How to bypass the power on button on pc
  Is there a way to bypass the power switch?
  
  If the computer starts correctly something wrong with the power button. If the problem persists, it is more than likely a problem with one of the hardware components and the problem will have to be isolated further. Let me know what happens.

• Adding a 3rd HARD drive to my Pavilion elite m9150f

  I have a Pavilion Elite m9150f with a motherboard Asus IPIBL-LB. I have 6 sata ports, but only 4 are currently used. It has Vista Home Premium 32-bit running 2 HARD sata drive seagate 360 with a partion recovery and 2 CD/DVD players. I would add a Seagate 2 TB sata as main drive (C) both a bigger partion (posibly update of OS in the future) 20 to 25 GB for recovery (D) copied to starting from the origanal and reformat it as a temp for videos, etc. I can do this by moving the SATAS after the cloneing and move the optical drives and see MOBO them without having to make all kinds of changes to the BIOS. Thanks for any advice in doing so.

  Hello

  If you have already two drives hard and two optical drives, then you will have a hard time to find a place inside the PC to secure the third hard disk.

  You could try to use a 5.25 "to 3.5 adapter railsand then fix them and the hard drive down inside the PC. Another option would be to expand the two ports of the vacant motherboard to the I/O back plateand use a drive external eSATA dockthat could accommodate two hard disks that are either 2.5 "or 3.5" or a combination. That would give you great flexibility for the exchange of different hard drives while appearing that they are installed in their own country.

  You should be able to use a hard drive imaging product to the new hard drive the current boot drive. If you use VISTA then I would avoid using a disc hard format model advanced unless you know for sure that the disc produced Imaging align correctly partitions. In any case, if you use VISTA then upgrade to service pack 2 and run this update Intel utility before you install the new hard drive. Utility update driver Intel Intel Driver Update Utility level Bios 5.43is the latest bios for your PC.

  I use Paragon Hard Disk Manager Suite(eval copy) to make the imagery of my hard drive, but there are other products available. Macrium Reflectand Acronis are also good products.

• Cable DVI signal VGA No.

  At startup I get a box in the middle of the screen (check the DVI cable), another is (signal VGA No.) I can only boot into safe mode. Help, please

  Unfortunately, some of these viruses are smart and made copies of themselves in the system restore files so full backup on an external hard drive or a drive, that's what I would recommend if the problem is not resolved by using the method of system restore.

  I guess that you do not have a disc in which case you can order Windows 8 upgrade for $ 70 and make formatting and install if your system supported for as little as 70 dollars on newegg but you will probably not like the user interface.
  Just search for Windows XP, 7 or 8 online at Newegg or Amazon and figure on the operating system that you want that supports your needs of material systems.
  Unfortunately, XP or Vista will be difficult to find because Microsoft will reduce the support very soon.

• Re: Satellite Pro L300 - no signal VGA on an external TV

  I have a satellite pro L300. When I connect to the TV using a VGA cable I can't get a signal.
  When the PC starts the Toshiba Logo appears on the TV screen, then microsoft appears, but then the only thing that appears on the TV screen is "no signal".

  I can't understand what is wrong - someone can help please?

  Hello

  You can boot the system to Windows and you can use s to laptop display?

  After windows OS has started, use the Fn + F5 combination to switch between the internal display and the external monitor.

• HP 2310ti: DVI no signal vga active

  I have a hp 2310ti monitor. And I did have a problem with dvi no signal and vga active. I use the monitor vga cable vga for computer with dvi - a connector? Is there a problem with the cable?

  Enter in the menu screen, and then select input DVI.

• VGA no signal

  What does say when I get the message that says "No VGA Signal"?  Do I need to replace something?

  This means that the monitor is not getting a signal VGA (blue analog video cable) to the computer. It's normal if you use other such (white) DVI video cables and cables HDMI (black). In this case, VGA is not active.

  I would check the video cable from the Tower of the pc to the monitor. If it's the blue VGA cable then make sure it is connected properly at both ends.

  You get no matter what video display when you turn on the lcd screen and the pc?

• No input vga no signal dvi or

  I just bought a custom built Gamining PC. Every now and then when I start the pc I get the message "' NO signal vga input / no monitor DVI input signal go to sleep" I turn off the pc and wait a few minutes and then try to start the pc again. " After about 3 to 4 times to go through who / pc boots fine and desktop is displayed on the monitor.  So, what could be my problem?  It sounds as if there is a problem with my video card?

  TlWilliams,
  Thank you for visiting the Microsoft Answers community forum.

  Yes, that sounds like a video card problem.  Or it could just be a cable or in bulk.  Check the cable that goes from the video card to the monitor to make sure you it is connected at both ends, try change if it is editable, turn off your computer and reinstall your video card (take out and put back) If you are comfortable doing this, or contact who built to allow you to take a look.

  Let us know if we can help you.
  Thank you
  Gloria
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• HP Elite L2201X

  We got 5 HP Elite L2201X screens vga - display port adapters and cables vga 1 meter.

  When you connect all upward, the computer will detect another monitor and you can configure the parameters of 2 monitors, expand the office and resolution etc.. No matter how we try we can never obtain an image to display on the screen.

  the front LED light is still orange. If you power on and off, the LED turns orange then white.

  We tried different computers, screens, vga, combinations of vga cable adapters, we get the same result evertime. We do not have a computer with a display port, so we cannot test the display port to display the port option.

  All windows computers 7, all computers use the VGA output with vga, display port adapter. Each computer detects the monitor but nothing shows an image.

  VGA is analog, the dp is digital - it will be difficult to find a converter for it.
  Even from DVI / dp, you need something like this:
  http://EU.StarTech.com/AV/converters/video/HDMI-or-DVI-to-DisplayPort-active-converter~HDMI2DP
  Your card will not work as the other sense, and only if the source can provide signals analog vga.
  
  You will need to buy a graphics card with dp for this race.
  
  C.

• Pavilion 500-070: VGA port broken on HP Paviliion

  Recently, I had planned to put a few new parts (PSU, processor, graphics card) in my PC. I opened the folder to clean some dust out with compressed air. I closed it and I have no signal VGA connection to my monitor. I opened the box and messed with the port from the inside until it worked. A little later, the start of the port does not again and my previous dose did not. I tried the cable VGA and monitor with another computer, so I know they work.

  Anyway, the VGA port on the back is damaged and it does not work. I called HP and because my computer is no longer under warranty, they said it will take more than $300 to fix and I'm not so interested in this possibility.

  My question is whether, since I already ordered a graphics card, if I install a new graphics card, I will be able to connect the monitor directly into the card and be able to use my computer like this? Or is there an option that I need to be able to navigate? If it's the latter, I'll have to fix it or get a new motherboard.

  I know that my computer is a bit old and I'm a little new to this, but any help is greatly appreciated!

  Thank you!<>

  Enter the system BIOS/UEFI parameters by repeatedly tapping on F10 key when starting upwards. In some cases, you will have to type the ESC key to access the boot menu, THEN press the F10 key.

  I say you may need to disable the onboard graphics in the BIOS as BIOS may already be set to 'Auto' mode which automatically detects which graphics connector is being used and automatically use this adapter. But if it is specifically set to "integrated graphics", you will need to change it to 'Auto' or 'PCI-e '. I can't give you specific shows once you are in the BIOS, because the BIOS interfaces can vary considerably. But you should be able to navigate through the different sections and find the graphics settings, it is not so difficult. You can visit the BIOS settings before you make your purchase just to be sure that you are convinced that you will find the necessary parameters. Or, you can install the card and see how it goes, if you do not get a screen so you know that you should disable the graphic edge.

  Another consideration is that you have only a 300W power supply which probably is not a PCI-e power connector. The PCI-e slot itself provides only 75W so I would limit your new card to 75W or less.

  Still another consideration is that you will probably need to disable "Secure Boot"in the BIOS also.

  IMHO, I think that replacing the motherboard would be unaffordable.

• RAM Error Code: BIOME-1

  My wife HP Pavilion Elite m9150f desktop PC had problems, so I ran the Diagnostics.  He said that memory does not have, so I re-sat 4 chips and re-directed diagnostics.  This time I got "error Code: BIOME-1", but could not find a definition anywhere on HP - does anyone know what this means?

  Thank you

  Frank

  4 memory modules were a couple - slot 1 contained a 1 GB module, slot 2 contained a module of 512 MB. slot 3 contained a module of 1 GB and slot 4 contained a module of 512 MB.  I removed the module in slot 1 and revived the base memory test and got the same error.  After removing the module slot 2 (location 1 remained outside) and rerun the test, it came back normal.  I put the module 1 GB back to location 1 (so now we have 1 GB in slot 1, 1 GB in slot 3 and 512 MB in the 4 Groove) and revived the memory test - it came back normal.

  So I replace the 512 MB module and the PC should be back in 3 GB of RAM.

  I still don't understand why the explanation has been found somewhere in HP.COM!

• How to connect Equium A100-306 to HDTV?

  Hello

  I was wondering if it was possible to connect my Equium A100-306 to my HDTV using a VGA cable component? The laptop has the chipset intel 945g.

  Thank you.

  Hello

  You cannot convert only a RGB (VGA) signal to component (Y-Pr-Pb), since you will need a converter that transforms the signal vga to this component.

  Which means that you also a converter for cable that could be very expensive. But if you've got components that you should be able to display an image on a device that has entry components. Don t think you will be able to run the HD-ready or full HD on a HD TV, since a HD signal requires an HD port on your computer and a disk hard taking supported system with better graphics chip and then a chipset intel.

  Welcome them

• How to connect my Satellite L300 to TV?

  Hello...

  I have a Toshiba Satellite L300 - 2 4 and want to connect my Toshiba 32HV10E plazma

  The tv has a hdmi input, so I bought VGA adapter and connect it to the computer

  Unfortunately, it does not work.
  The computer recognizes the TV, but not the same with the plazma

  Anyone?

  Eventually he s a problem HDMI VGA adapter.
  The point is that you cannot convert the analog signal into a digital signal (VGA to HDMI)
  You can convert digital to analog (VGA/HDMI)

  As far as I know the TV supports a component port.
  So, try using a VGA adapter - component cable.

• printers HP 8500 (A910a): print head for white stripes of printing cyan horizonnally

  HP 8500 (A910a).  No. Windows7, no change in system error message. The system is hp Pavailion Elite m9150f

  Prinrt instakked wired Ethernet networking

  Printhead print white strips horizontally on cyan and green on Test patter diagnosis 2.

  Checked the blanck/cycan printhead. Cycan nozzles are dirty.

  Can I clean (how?) or do I replace the print heads? If so, replace a print head, or both?

  After the old replaced print head, printer replrts the cyan cartridge is low. It's a brand new cyan cartridge. How can I get the printer to consider new?

  To answer the first part of your question, you can clean the heads printing either through the front of the printer or do a manual cleaning.  This document here will focus on horizontal lines in printing and show how to correct the issue, clean the print head through the façade and based on the printed report, the print heads to replace.  The other way to clean the printhead contacts is to do a cleaning of the contacts of manual.  Here a link to a document that shows a way to clean the contacts manually.

  The cartridge error message, I would like to look at this document. He will wear the error message you are getting and troubleshooting steps of the offer to take to try to solve this problem.

• one button backup

  Computer M9150f.

  After replacing the motherboard, I have a left cable I don't know where to connect.

  It's a PIN to two sons who go to the backup button a button on the front panel. It is 2 blue wires and the other is white.

  Thanks for the help.

  Hello @jmacl,

  I understand you are trying to connect the blue and white of the cords that lead since the Save button easy on your HP Pavilion Elite m9150f desktop PC. Easy backup button connector connects to the back of the media card reader. To get to the level of the connector, you will need to partially remove the memory card reader. I provide you with a link to how it should look below:

  

  I hope this helps. Thanks for posting on the HP Forums. Have a wonderful day!