CMC M1000e SSL problem

Similar Questions

• Short server SSL problem

  Hello!

  I have a problem with SSL and my short server. When I try to join my server with the URL https://localhost:7002 / short-server/ws/manage? wsdl I get the error:

  An error occurred during a connection to localhost:7002. Peer SSL cannot verify your certificate. (Error code: ssl_error_bad_cert_alert)

  The strange thing is that I can connect to the server via the Studio short and commissioning Service. But this URl does not work.

  Also, when I try to run a graph with this WSDL I get an error that it cannot connect.

  Does anyone know what could be the problem?

  Thank you!

  Marco

  > How can I access it via SoapUI?

  Any web service that is public is accessible through SoapUI. See for example this doc: http://docs.oracle.com/cd/E40521_01/server.761/es_data_loading/toc.htm#Overview%20of%20the%20Data%20Ingest%20Web%20Service

  It lists WebService to ingest data can be accessed at:

  http://localhost:/endeca-server/ws/ingest/?wsdl
  

  Of course, you should use the HTTPS protocol.

  > If I run a graphic like the graph of initdatadomain it also gives me an error that it can't connect. So you still think it's a browser problem? It gives an error on the WSDL binding.

  It already looks like a resolution problem with short server host name. See here: http://docs.oracle.com/cd/E40521_01/server.761/es_admin/toc.htm#Hostname%20resolution%20in%20the%20Endeca%20Server

  Regarding the browser, Oracle does not recommend a short server securely installed via a browser.

• Mind IE, CPP and SSL problems

  Hello
  
  We want to change our flex completely to SSL application. The first attempts were successful - with Firefox.
  However, we expected some problems with IE (v6 and v7). We received the following message if poster in Internet Explore after attempting a call to the remote object on a secure channel:
  

  Quote:
  Channel.Connect.Failed error NetConnection.Call.Failed: HTTP: failed: url: ' https: / / www.myapp.de/flex2gateway/cfamfsecure/'

• Questions of CMC M1000e redundancy since the upgrade of the Firmware 5.00

  Hello

  We see a lot of the following alerts

  "Chassis management controller (CMC) redundancy is lost '.

  and 30 seconds later

  "The chassis management controller (CMC)" is redundant".

  on our fleet (47) of the chassis, since upgrading the firmware to 5.00.

  It happens every day on some chassis, which, before the update, maybe obtained a such report once a month, if that.

  Everyone knows about this problem?

  THX,

  John Bradshaw

  Bradje1,

  I'm doing research on the issue for you, and it seems that there is another way out in the future to replace 5.0. In this time, but if you want you can either restore the CMC firmware to the previous version, or ignore the error up to the new CMC update is released. Sorry for the inconvenience.

  Let me know if that answers your question.

• Syslog 113019 ASA SSL problem

  Hello

  I tried SSL VPN on ASA 8.2.1.

  About 5 ~ 10 minutes after the SSL connection is created, I get the following error.

  Error ID:113019 group = DefaultWEBVPNGroup username = testuser, IP = 114.xx.xx.xx, disconnected Session. Session type: SSL, duration: 0: 00: 17:00, xmt bytes: 778134, RRs bytes: 173139, reason: unsupported Client type

  Does anyone know what it means 'No supported Client Type'?

  Any contribution is appreciated.

  Thank you.

  Under Secure Desktop Manager/Default/Cache Cleaner, check to see if you have "Launch cleanup upon timeout based on inactivity" checked.  If so,
  
  what is the timeout?
  
  Could you try to increase or disable the idle timeout value set in CSD cache cleaner and see if it helps.
  
  

  -heather

• Series 3000 VPN hub with SSL problem

  I use the http access to the vpn concentrator and install SSL on the page using IE 6. I open the file and installed successfully with the certificate in IE can I view the contents of the certificate through IE.

  I allow cookies and java script of the security for IE tab. Why can I still access using https? Any other configuration that I left out? I use https to access the private interface have private ip address.

  Kind regards

  Sam

  If you have been set up the certificate in a test environment, it may have the wrong IP address. Check under Administration | Management certificate that the IP address of your SSL certificate has the IP address of your interface. If you have changed the IP address since the generation of the certificate, it will no longer work. I'm assuming that you have configured everything properly under Configuration. System | Management protocols. SSL.

  It will be useful,

  Mark

• SSL problem when running Apache httpclient Jrun and not standalone Java

  We use the Apache httpclient 4.1.2 to post on an external server, using SSL. The position works well when it runs since Java JRE, but when the code is running in a JRUN/Colfusion instance that uses the same Java JRE, the error message returned is:

  javax.net.ssl.SSLPeerUnverifiedException: peer not authenticated

  at com.sun.net.ssl.internal.ssl.SSLSessionImpl.getPeerCertificates(SSLSessionImpl.java:352)

  at org.apache.http.conn.ssl.AbstractVerifier.verify(AbstractVerifier.java:128)

  .......

  When you debug the connect using the -Djavax .net .debug = all , the illustrated internal error message is:

  java.lang.RuntimeException: could not generate secret

  Is there some settings strange ColdFUsion, to undo to do this job? We installed the cert of the other server in the/rje/lib/sercurity/cacerts file, but has not made a difference. Why the work of independent java and not Jrun?

  The JDK version is 1.6.0_24 - b07

  ColdFusion: 9,0,1,274733

  OK, the solution was simple, to disable jsafe the right way by adding the property of java command line:

  -Dcoldfusion.disablejsafe = true

  Hope that jsafe is not used for something vital...

• M1000e with M8024 (problem connecting to pass)

  I have a Dell Poweredge M1000E Blade chassis with two switches of the M8024.

  I configured the IP addresses of the M8024 (B1 and B2) on the CMC web.

  All ports on the controllers of chassis are connected to my network.

  I can connect without problems to the M8024 into the slot in B2, but cannot connect / ping / access the M8024 in B1.  I have tried power cycling/replace the switch but no luck.

  Any suggestions?  I tried not to do anything via a SERIAL connection.

  I understand the problem!

  CMC M1000e chassis preview / network / config VLAN.  The VLAN Tag parameter has been activated for the M8024 in B1.  This prevented work properly on our network, because the vlan defined for the specified VLAN ID was not set up.  I unchecked the box in the column "Enable" (for B1) and he now available!

  Thank you!

• Agent of the NAC this SSL error

  Running

  CAM: 4.5.0 lite

  Current Windows clean access Agent Version: 4.5.0.0

  Current Windows clean access Agent Patch Version: 4.5.0.0

  Agent Macintosh's own access current version: 4.5.0.0

  Course Cisco NAC Web Agent Version: 4.5.0

  (Clean access windows agent installed on the host (Vista Business) is version 4.5.1.0)

  CAS mode: L2 virtual OOB GW

  The installation program is in conditions of laboratory for a proof of concept.

  The following scenario occurs each time a new authentication is attempted from a vista host running the agent access.

  -------------

  I plug the host on the controlled NAC switch port

  I get an ip address although my pool of vlan and dhcp auth

  Agent of Cisco clean access is displayed on the screen according to the normal

  I enter my user and pass and click login

  I get a "security alert" pop up indicating "the revocation information of the certificate for this site is not available. Do you want to continue? »

  There are 3 buttons to choose: Yes, no, display certificates

  I click Yes, but the error message does not disappear,... no matter how many times you click on Yes,... the error remains on the screen, keep you from making the connection.

  If I click on no.

  The clean access agent then says "network error!, detail: Certificate SSL REV failed [12057]."

  My only option is to click on the "Close" button so I don't

  This closes the agent clean access, but the agent instantly appears buck on my screen asking again user them and pass.

  I enter the right user and pass and click login

  I receive a new security alert pop up stating "this page requires a secure connection which includes server authentication." "The issuer of certificate for this site is unknown or unreliable, making you go?

  My click Options, Yes, no, view the certificate or more information

  I click on Yes, the security alert disappears and own access now States that I managed to connect to the network.

  It refreshes my IP address and puts me in the vlan correct based on the role of my user name.

  -------------

  I checked the event logs, all my access attempts are accepted, (on the 2nd try of course), but there is no errors in the cam on this SSL problem.

  However, I get a warning red text on the summary page of the cam, which stipulates the following, which I do not know if it has any impact on my problem.

  "WARNING: the end-entity certificate issued by"www.perfigo.com"is suitable for laboratory environments only." You must import a certificate of third party entity end for your own Access Manager and own access servers before the Cisco NAC Appliance deployment in a production environment. Please check your own access servers and ensures Clean Access Manager for similar messages.

  WARNING: The current "www.perfigo.com" trusted certification authority is suitable for laboratory environments only. Cisco recommends to import a third-party certification authority. Please check your own access servers and ensures Clean Access Manager for similar messages. »

  My questions are,

  -Why used the CAA accepts the first authentication attempt?

  -How can I remove the first security alert?

  -How can I set the CCA so that I login just once without having to click on no and wait for CAA to appear a 2nd time?

  Thank you all

  The fundamental problem is that the customer is unable to check the root certificate for your CASE.

  I guess that since you have always the perfigo warning that you have not installed a certificate valid on the job. If you did, you must remove the certificate of perfigo. If you install a valid certificate, you must remove the Perfigo cert.

  Once you have a valid cert installed, make sure that the client can access the certificate server root of the AUTH VLAN. That should get rid of these two messages.

  If you cannot provide access to the certificate server, then you cannot get rid of the second message, but you can get rid of the first message (the one that sticks you in a loop).

  This message (the first one) is due because the check certificate revocation in Internet Explorer has been enabled. This option has been disabled by default in XP, but is enabled by default in Vista. The option is disabled in Internet Options > Advanced tab > check the CRL.

• AnyConnect SSL Premium license not stackable

  Hi, first of all, thank you for reading my entry.

  Recently I have activation of license SSL problem.

  Customer purchase L-ASA-SSL-50 = and L-ASA-SSL-250 = for their ASA5540 in support of 300 peers.

  I realize the two key PAK set separated by commas, but I get an activation code for 50 peers.

  Answer license 250 TAC cannot be shown due to the system detect there are already 50 licenses.

  That means 250 = and = 50 cannot be stacked together to reach 300.

  I searched to find Cisco doc about this problem, but no luck.

  Has anyone read this Cisco documentation somewhere?

  Now, Cisco can add the 250 = license and remove 50 =.

  But I do not know if this add 250 = can replace 50 = installed to ASA.

  Someone at - it similar cases?

  My source is a guarantee of training partner.

  There is a small reference to this behavior in the following location:

  http://www.Cisco.com/c/en/us/support/docs/security/iOS-sslvpn/67909-SSL-...

  I have not performed the upgrade right that you are talking about but, so general, licensed ASA is passed and implemented via an activation key that is generated by the internal system from Cisco and, when it is installed, it will result in the unit reflecting the level of license bought - assuming that it was purchased correctly of course.

  Your dealer should be able to advise you on the right track.

• OME 2.0.1 trap redirection problem

  I have two OME 2.0.1 different servers in geo-sites. A (secondary) is configured to send SNMP traps to the other (primary). For testing, I use an Equallogic and a CMC M1000e - on the two secondary OME is the destination of interruption. I see traps coming into the console of the secondary OME, but I don't see them in the main console OME. Also, I don't see them in troubleshooting tool from Dell (listener SNMP) on OME primary. However in Wireshark on primary OME, I see the SNMP packets arriving from the secondary IP of OME.

  At the same time, SNMP traps are OK to primary OME of devices it is followed in direct mode.

  Any ideas?

  Also, what is the Community field object when configuring trap transmission of OME to MOE? OME destination doesn't have any set SNMP community, source OME is not discovered as a guarded object.

  Thank you

  Egils

  Okay sorry for wasting time everybodys. It's all about Windows Firewall on destination OME. Even if I enabled the predefined rules of SNMP allow traffic SNMP trap, I didn't notice that the rule defined for public networks is limited to the Local subnet only. That's why I got the traps from the local subnet. I just created custom rule for the remote subnet special and everything works fine.

• New installation of windows 10 over windows 7, cannot load any web page, all the patches to Firefox?

  I find some information about the SSL problems and that you have copied certificates internet options, but that still does not solve the problem. Firewall is turned off, while trying to solve the problem. Microsoft edge is able to get on the web pages that I have also tried with Firefox. Loading Firefox, it seems that his will display the homepage for a micro second then displays only a blank page, no error message any. Could not include any troubleshooting info from Firefox since then I can not to show anything. Any other ideas?

  After a complete reset of the TCP stack, Firefox has been completely works again.

  In short, I ran fallow on the start menu: cmd (ctrl + shift + enter) to run it as admin, then each of these command lines, if after you run the commands, the system asks to be restarted to complete, do.

  ipconfig/flushdns
  ipconfig/registerdns
  ipconfig/release
  ipconfig / renew
  NETSH winsock reset catalog
  NETSH int ipv4 reset reset.log
  NETSH int ipv6 reset reset.log

  Thanks for your help jscher2000.

• When I deleted and then recreated the same account that all emails are now gone. Where did they go?

  I had problems with getting mail from my verizon email account. All of a sudden stopped working when checking mail. The transmission was fine. No server settings have been changed. Then as a final trial before the nightmare to finally give them, I removed the account and then set up again. I now get the emails, but all the 'old' disappeared. Where did they go?

  I read all the messages on the verizon smtp ssl problems but this (lack of e-mails that have been alreadiny in thunderbird) seems to be a matter of TB.

  Any help would be much appreciated.

  Jack

  I don't think so.
  If you think it's a problem to check with your email provider.

• Satellite L40 - B - security certificate error - all Broswers

  Hello

  I just reset my computer (he was running more slowly than usual).

  * Toshiba Satellite L40 - Part B: PSKQ8A-00E001 serial No.: 4E141609S *.

  And reinstalled Windows 8.1 and updated all the drivers:

  However, I am currently getting the following error messages in my browsers:

  Google Chrome: Your connection is not private. Attackers might be trying to steal your information of www.google.com.au (for example, passwords, messages, etc.) NET: ERR_CERT_DATE_INVALID

  Internet Explorer: There is a problem with the security certificate of the website the secutiry certificate presented by this website (google) has expired or is not yet valid.*

  I JUST FINISHED TROUBLESHOOTING:

  1. date and time > I have synced the date & time of time.nist.gov
  2. scanned for the broswer addons > using Avast Antivirus I scanned for any Add - ons that may have been placed on my computer - found nothing.
  3 uninstall all programs on computer > I uninstalled all the programs I don't know download.
  4 reset all the settings of the browser.
  5 broswer update to the latest version.
  6. for Google Chrome - tried to use Incognito - has continued to receive the error message.
  7 browsers uninstalled and reinstalled on the computer.
  8 restart the computer once the previous steps.

  I tried all the possible troubleshooting found on the Internet - if you can let me know if there is any more I can take - there seems to be a problem with my laptop because I have reset > I've never had this problem before.

  I'll write the programs currently installed on my computer below if you know if these are the original SSL problems

  Alcor Micro PCIE card reader
  Setup driver Atheros
  Avast free AntiVirus
  Bluetooth Stack for Windows by Toshiba
  Classic interface
  Dropbox
  Google Chrome
  Intel Graphics Driver
  Microsoft Office 365
  Microsoft OneDrive
  Qyalcomm Atheros Bluetooth Suite (64)
  Realtek Ethernet Controller Driver
  Realtek High Definition Audio Driver
  Synaptics Pointing Device Driver
  Toshiba Service Station
  Toshiba system driver
  VLC Media Player
  YTD Video Downloader 4.8.9

  I found some details on this error notification ERR_CERT_DATE_INVALID
  The reason has been discussed in the Microsoft forum.

  It seems that Avast antivirus somehow involved in this error.
  Try disabling all the parameters that may affect the https sites.

  Of course, you can also try to uninstall Avast Antivir and could test other software like Avira Antivir.

  Also try the solutions here:
  https://productforums.Google.com/Forum/#! yUlqskT6Kis/chrome/subject
  https://productforums.Google.com/Forum/#! 2XLMJpsRTq4/chrome/subject

• Inaccessible SSH and CONSOLE password lost on a PowerConnect M6348

  Hey everybody,

  I'm in big trouble...

  The switch is not responding to ping (even after a hard reboot), and I lost the password in the console...

  I am looking for a way out of this mess and be able to connect to the switch CLI.

  I tried to connect via the CMC M1000e, but she also inspired me, a need for password.

  You guys could help me on that? What are my options? Can I somehow the selector?

  Thank you for your help,

  Concerning

  Jeremy

  Hello

  You should be able to bring up the menu to start the console by pressing 2 during POST. There is an option to restore the default settings.