Error 0xc000000f startup

Similar Questions

• Windows - error 0xc000000f Startup Manager

  To the title of the info, it reads: an error occurred trying to read the boot configuration data.

  I insert the disc to reinstall my computer does not restart with the disc and press ctrl + alt + delete. ):

  Am I doing this wrong?

  Once you have started on the DVD, then follow these steps:

  ·        Do a startup repair, boot from the disk Installation of Windows Vista genuine (or one that you can borrow from someone) or a recovery disc.  Here is the procedure: http://www.bleepingcomputer.com/tutorials/tutorial148.html.  You may need to change the BIOS to do first the CD drive in the boot sequence to boot from the CD.  To do this, hold the screen that tells you the key F to push to enter the menu start or start of installation.  Push it quickly. Make the changes, save your work and exit.  Put the CD in the drive and reboot.  When you are prompted, press any key to boot from the CD.

  If you do not have a floppy disk, you can make a bootable recovery disk by using http://neosmart.net/blog/2008/windows-vista-recovery-disc-download/ with burning software like: http://www.snapfiles.com/get/active-isoburner.html and, of course, a blank CD.

  If this does not resolve the problem, try the following:

  To run the Bootrec.exe tool, you must start Windows RE. To do this, follow these steps:

  1. put the Windows Vista installation disc in the disc drive, and then start the computer.

  2. press a key when you are prompted.

  3. Select a language, a time, a currency, a keyboard or an input method, and then click Next.

  4. click on repair your computer.

  5. click on the operating system that you want to repair, and then click Next.

  6. in the System Recovery Options dialog box, click command prompt.

  7. type Bootrec.exe, and then press ENTER.

  
  Note If rebuilding the BCD does not resolve the startup problem, you can export and delete the BCD, and then run this option again. In doing so, you ensure that the BCD is completely rebuilt. To do this, type the following commands at the command prompt Windows RE:

  ·        bcdedit/export C:\BCD_Backup

  ·        c:

  ·        Boot CD

  ·        BCD attrib s h - r

  ·        Ren c:\boot\bcd BCD.old

  ·        Bootrec /RebuildBcd

  Good luck and I hope this helps!

  Lorien - a - MCSE/MCSA/network + / A +.

• Cannot reset windows 8 for the factory settings and get an error 0xc000000f, after system startup.

  * Original title: I can't seem to be able to refresh, reset or reinstall my windows 8

  I have a laptop Asus s200e

  I would I have tried to reset my windows 8 to the factory settings and the thing is he always tells me that I have missing files and I need the installation disc. That is, that I don't have an installation disc because it is preinstalled and I tried to start up and I got an error 0xc000000f.

  Please help me

  Hello

  Thanks for posting the query on Microsoft Community.

  Am sorry to know that you are unable to boot the system, and you get an error: 0xc000000f.

  This error can occur if some files are corrupted, or if you have made changes to your computer.

  Did you change to your system, the hardware and/or software, before this problem?

  You can try to restore the computer configuration by clicking on the link below.

  Windows 8-How do I restore the system to the factory default settings, if I can't get into the system?
  http://www.ASUS.com/support/FAQ/1008226/

  Note: If you reset the computer to factory settings, it will remove all applications, programs and drivers that you have installed. If you need to reinstall all applications and programs, once you reboot the system.

  If you still have the same problem, you must contact the Asus technical support. Here is the link: http://support.asus.com/ContactUs.aspx?SLanguage=en

  I hope this helps. If you still have problems with windows know please let us.

• HP Elite Probook 2570p l: HELP... error 0xc000000f

  Hello

  While I was with my laptop, it went off suddenly and would not start again. I got an error 0xc000000f and I was asked to insert the windows installation disc, and then restart the computer.  I did this and tried to repair windows, but nothing happened.  I even tried to connect (bcd) startup with windows files, but I could not find the usual windows, instead files, I found this d:\$window~BT.  So now, my computer does not start and does not have the usual windows file.  What I have to do.

  Elite computer 2570p laptop HP Probook

  Product model C9E79UC

  I don't have the reloading DVD (2 drivers) and one for Windows completely reload 3.

  Help will be appreciated. Thank you

  Hello

  I find it strange... I think if you live in Australia, and if you bought the computer from the Australia, you must contact the HP support for the Australia. I guess he must have occur an error and you should talk to the HP support for the Australia, not for US.

  Yes, it is understandable that the HP support we ship records in Australia, but Australian support HP should be able to advice.

  HP has different policies and practices of different countries. In some countries the discs (recovery media) is provided by HP partners for the country.

  I suggest that you contact HP Australian support and insist to have local support because you live in Australia and the PC is purchased by the Australia.

  You can also check with local partners of HP:

  > > http://www8.hp.com/au/en/store-finder/find.do?bs=SR2 & type = reseller

  Search for Melbourne, Australia

  Choose 'expertise Partner. "

  You should end up here with the list of the local partners of 20 companies.

  Let me know if they can provide you with assistance.  If this is not the case, thanks for posting.

• HP ProBook 450 G2: 8.1 for Windows does not start error 0xc000000f

  My friend laptop has developed an error on startup after use of less than a week. The error reads as follows:

  Windows could not start. A recent hardware or software change might be the cause. TI solve the problem:

  1. Insert the Setup disk and restart your computer.

  2. choose your language settings, and then click "next".

  "3 click on repair your computer."

  If you do not have your system drive contact your administrator

  File: \Boot\BCD

  Sastus: 0xc000000f

  Info: An error occurred trying to read the boot configuration data.

  My friend tells me that there is no external device attached to the laptop and it was working on Excel in time. Windows updates are being installed and the computer laptop ran out of battery and turned off. The computer is restarted, it got the error above.

  System information:

  Processor: Intel Core i5-4210U CPU @ 1.70 GHz

  Current processor speed: 1700 MHz

  Memory size: 8192MG RAM

  BIOS date: 20/09/2014

  BIOS revision: M74 worm 01.05

  I have the DVD of the operating system, but when I select to boot from it, I get error saem. I tried the driver and application recovery DVDs, but that takes me directly in restoring to factory settings menu (I get no repair option). I tried to run diagnostics in the system (quick test). It starts with the battery and after about 10 seconds returns to the previous menu. Looking at the logs, it is said that the diagnistic was canceled, but certainly not by me. I managed to run individual tests on do as the battery, processor and hard drive and they all passed.

  How can we try to repair Windows rather than recreating the image?

  If you create a USB installer or Windows 8.1, you should be able to access the recovery options advanced that you will use the Safe Mode. If you are able to boot in safe mode, then using the system recovery may very well be the answer to the question of the BCD store that appeal to you.

  Follow the instructions on the third party site to create a usb Windows 8.1 installer using a key of Windows 8.1 credits and use it to access the Windows environment.

  https://www.WinHelp.us/non-destructive-reinstall-of-Windows-8-and-8-1.html#media

• Error at startup. Need serious help.

  I am not able to perform a search on Google.com and especially all the search engine, it's evidence of a connection not approved and if I get complete site then it works some time (for example www.facebook.com). I tried to configure the real clock timings. In addition, even after download ad-blocker, I always face problems ad.

  What is the message of the error at startup? Is it in the page itself or a pop-up?

  There are several potential causes of generalized certificate errors. It's Firefox is not completely set up to work with your security software (or using Firefox's Reset feature, which means that set up again). But the malware is also a potential culprit.

  You have added all the exceptions (using the Add Exception button in the section "I understand the risks" of the error page)?

  You can check that your Firefox connection settings have not been changed:

  "3-bar" menu button (or tools) > Options > advanced > tab mini network > button "settings".

  You can try 'No proxy' it.

• I get this error at startup: mozupdate.dll missing. What should I do

  mozupdate.dll error at startup
  I installed a new copy of firefox and the problem remains.

  Hello

  Please see this.

• Portege R830-10 q - Win 10 upgrade - error 0xc000000f

  I have a Toshiba Portege R830-10 q I'm trying to put Windows 7 upgraded to Windows 10.

  When upgrading, he stumbles and goes into a loop of repair to 29% which gives me error 0xc000000f with no way to roll back.

  A clean installation, installs absolutely perfect, but due to rules of activation of Microsoft (possible only via an update unless you buy the product), it is no good.

  Has anyone managed to upgrade the q R830-10 Windows 10 yet?

  I know that's not on the list of approved of the PC Toshiba, but surely there must be a way

  I also have this problem, anyone can give us advice how to fix this
  Thank you.

  Jonathan

• trayyapp error at startup

  I downloaded a few Assistant s/w and hp driver printer for my dv4 and maybe a few other s/w HP.  Now, I get a Trayapp.msi error at startup.  I don't see no trayapp s/w can I specifically reinstall or remove.  How can I tell what s/w must be reinstalled to get rid of this error?

  It is likely a piece of software which it was installed or uninstalled recently. You have installed an HP printer on this computer?

• Realtek RTL8101 PCI Ethernet is in error during startup

  Hi all
  I have EDT recently bought by Satellite A200-1CN notebook PC series. I'm having a problem at the start of the system that has Windows Vista installed.
  The Realtek RTL8101 PCI Ethernet v 1.02 (060510) gives error during startup. The error is to run is as follows

  PXE - E61 Media Test failed
  MOF: Left PXE ROM

  Can any help with this problem

  Concerning

  Hello

  Hmm you ve you have a problem with the Vista boot! :|

  Usually, this message appears because the BIOS can not find a source of start-up as ODD or HARD drive and then try to boot from LAN.

  Perhaps the BIOS can not find HARD drive due to a hardware problem.

  Hmmm. First of all, you should try to change the boot order in the BIOS. Put the HARD drive as first boot device.
  Save the settings and try to restart the laptop. If it is not possible to start the Windows Vista I guess that HARD drive is dead!

  Have you tried to reinstall Windows Vista using the Toshiba Recovery CD? Check this box!

  If all this procedures don't help I recommend you contact the ASP in your country.
  The technician must check the laptop and if necessary, it should replace the HARD drive.
  Your warranty is valid so that everything should be done for free.

  Good luck

• Satellite Pro L300D-20R: displays error 0xc000000f when recovered

  Hello

  I wonder if someone can help me. There are accidents of software in my laptop. I tried to restore my laptop to factory setting, but failed.

  Here's what I did: under the opening of proceedings (F12) to drive recovery HARD, I entered "repair your computer" and then computer show the error 0xc000000f. It came at the very end when I 'C' boot from CD/DVD with windows Vista recovery.

  Any help appreciated,
  Thanks in advance,

  Adam

  Hello

  As far as I know, you have to press F8 to start the HARD drive recovery process.
  Then a new menu will appear where you can choose repair my computer.
  Then, you choose the HARD drive recovery.

  If this is not possible, that it would mean that there is something wrong with the HARD drive or the partition that contains the files / image of HARD drive recovery.
  This might explain why the boot from the CD/DVD drive is not possible.

  Conversely a failure of RAM could be the reason too.
  That's why it of needed to check if these parts.

  By the way; are you able to boot from an another disc bootable Win XP or Linux live CD?

• Satellite Pro L300 PSLB1A: Recovery disk doesn't work no-error 0xc000000f

  I get error 0xc000000f on restart and if I try the recovery disk I get error error: 10-FC12-0241
  operating system is vista professional and toshiba laptop L300 PSLB1A - 02S 008

  Hello

  You mean that you cannot start the laptop using the Toshiba Recovery disk you created?

  Go into the BIOS and check if the CD/DVD drive is recognized. It should appear on the first page of the BIOS.
  If the CD/DVD drive is not listed, then you should set the compatible SATA mode and must save the changes.
  After this attempt to boot again from the recovery disc.

  I also searched on the Toshiba driver European page for info and found a few details;

  There is an update of firmware for CD/DVD TS-L633A and TS-L633P player.
  This Firmware solves "sometimes not able to writing on DVD + R media'.
  The problem occurs only on DVD + R media, other media type have no problem.

• HP PhotoSmart Essential error at startup

  Hello

  Until the other day I had any problems when I start my computer.  A few days when I started the computer I got a pop up titled 'HPPhotosmartEssential' box and it said "Please wait while Windows configures essential HPPhotosmart" and a few seconds later another popup box titled "HPPhotosmartEssential" the following information - "there is a problem with this Windows Installer package. A program required for this install to complete could not be run. Contact your personlel provider or support package ".

  I have more the OfficeJet J4680 printer installation CD but I don't have the software to download so I opened it upwards and it was installed in the temp folder.  of which I went to start and typed folder and opens this file and follow these steps...

  Open the file "Setup."

  Open the folder "Scan". Right click on the "scan" (windows installation package) file and click 'fix '. If no error message appears, once again, right-click on the file and select "install".

  Return to the folder and open "bpd_scan" installation folder. Right click on the file 'bpd_scan' (windows installation package) and click 'fix '. If no error message appears, once again, right-click on the file and select "install".

  When I clicked on repair I received a new window bpd_scan error message that says: Module C:\Program HP Imaging\bin\hpqebpd2.dll failed to register. HRESULT-2147220473. Please contact support staff. I clicked on OK & following the next step

  Return to the folder and open "destinations" installation folder. Repeat the process above and that the repairs happened well.

  I restarted the pc but the problem persists.  (I deleted the shortcut of this file that was located in start > programs > startup - I deleted the shortcut of this file (called HP Digital Imaging Monitor).)

  I also opened a command prompt (run as administrator) and type in regsvr32 hpqebpd2.dll and who stated DLLRegister Server in hpqebpd2dll.

  I restarted the pc, but when I click on the file to open it (even if I do a right click and run as administrator) I still get 2 contextual window boxes.  And when I click OK or cancel the boxes still jump upwards of 3 or 4 times until it stops.

  I noticed that when I clicked to run / open this file it will appear in the lower right but I always get these boxes popup several times.

  Nothing had changed from one day to the next on the pc so I don't know why the problem occurred suddenly.  I ran several scans online for viruses and malware, as well as a boot scan, but nothing was found.   I have run ccleaner and noticed that he has found a missing DLL to C:\PROGRAM HP IMAGING\bin\HpqSRmon.exe

  I am running Windows Vista Home Premium with all current updates and is an officejet j4680 printer all-in-one.

  Others want a complete uninstall of the software to uninstall Panel or revo control printer and then reinstall the software I don't know what I can do to possibly solve the problem.   The printer software is version 14.

  Other possible suggestions or solutions would be very appreciated.

  TIA

  I'm glad you responded! I wanted to share with you all what I have solved my problem last night after having carefully followed the steps that I mentioned above. This way I can now explain the steps in a little easier way. When I started to experience this error on startup, I thought it was related to my network because it happened also when I turned the printer on and outside. I have to press OK, Cancel, etc. what felt like 50 times before my error message disappeared. I know it's a different file, but the symptoms are exactly the same, since an uninstall did not resolve the question or fixing things in Device Manager. It seems that the link you have provided very simple steps to a L3 uninstall. The great binding, but I found a simple way for the common user. Here are the steps that I took last night and my computer worked never better:

  1. I did a normal uninstall first. Don't forget if you have a USB cable, wait that uninstalling invite you to remove the cord but also before Setup tell you plug it back in. The complete uninstall took almost 25 minutes.

  At the end of the uninstall, you will get a prompt to click 'Finish', however I didn't click it. I've been waiting to restart my computer after I ran the disk cleanup utility in all programs > Accessories > system tools > disk cleanup.  This process took almost an hour.

  2 after disk cleanup was complete, I restarted the computer by clicking on the button 'Finish' the HP software that was always on my desk.

  3. after the restart, I followed the link to CCleaner and would like to mention to people not too savvy to be careful by pressing the green button 'Download now' more than once computer. It seems that there are a handful of commercial products that look like they tried to trick you into downloading the software.

  4. once the download is complete, CCleaner has opened and seemed much easier to use than I thought. I chose the tab register on the left, "scanned for any question," then selected difficulty scan after you have backed up files to remove (the software asked me if I wanted to save that I did). Sometimes you can scan up to three times until all problems have been corrected. As easy as it sounds, I still highly recommend reading so much about this product before installing it (see previous posts). This process was done very quickly, so I decided to use the file cleaner as well. Who did take a long time - about 30 minutes.

  5. this time, I rebooted by computer by stopping completely and then back on with the power button. I always liked this method instead of select "restart" your computer.

  6. I have confirmed my operating system on my computer will start and by doing a right click on 'My Computer' and selecting Properties at the bottom of the box grey just to make sure that I do not install the HP bad software. Then everything just re-installed the software at www.hp.com/support by typing the name of my printer tab support and drivers. The whole installation process took 20 minutes and even got an error at the beginning of my extraction process which stated "the Extraction failed. File is corrupted. "My heart is Serra for a bit, but after having clicked on the button"Download"once again, I have had absolutely no problems my network printer installation.

  7. I would like to add, during the installation process, you will see a screen that says 'Click here to customize' and I deselected product Participation, HP Update and some other useless tools, but I kept the driver, the solution, HP Imaging Device Center (which is what was causing my problem) and HP Photosmart Essentials since this is what was causing the problem. I had no problem after that.

  8. Finally, I did a reboot to ensure that all boot errors went away and the computer booted faster than ever with no error. Final test of all the features worked great. I was excited to try these steps on my own last night so that I could provide a way to rephrase things for all those too afraid of getting deep into their computer files. I hope as the method to keep it simple you will also feel because that please don't forget, using third-party software comes with its own risks. Let me know if this does not work, and then we can speak of an uninstall of L3/L4.

• Center of solution error at startup - HP4500 wireless

  Greetings!

  HP Officejet Pro 8500 A909g

  Win 7, 64 bit, Intel Dual Core

  Error at startup of the solution center 'Solution Center cannot work because your installation is not complete.  "Please plug in USB (I am running wireless) or restart the installation of the CD.

  Both software & printer worked very well for a long time.  To reinstall the software (yet) as 8500 disappeared from ground Ctr.  Removed all HP using HP uninstall disk, and then click Add/Remove programs.  Restarted the modem and printer.  Install and the latest version of the downloaded software went well.  8500 wireless recognized installation is complete, test page print wireless.  At the exit did not restart. Tried to ground Ctr and above got the error at startup.  I rebooted.  The same problem.  Then, I removed all and tried again with the same result.  HP printers are great - the software I used (in addition to time & different HP printers) makes me absolutely crazy!

  Kind regards

  Rich

  Hey Sherich - Id suggest giving the utility Install of Windows 7 to try first and then the doctor of printing & scanning HP. They can be found here: Hp Diagnostic utility's

  Let me know if or the other of these tools are able to solve the problem. Otherwise post returns with all new details or error messages, and we can go from there.

  Sorry for the delay!

  Sean

• error on startup: "error loading ozujufuxuzedesuv the specified module rundll32.exe is not found."

  I only get the error at startup code. "error in loading rundll32.exe ozujufuxuzedesuv the specified module cannot be found"

  You have a virus or other such pest or it could be the remnants of a pest that has been deleted by your AV software  Run a Malwarebytes and SUPERAntiSpyware scan on your machine and see if things change.

  http://www.Malwarebytes.org/
  http://SUPERAntiSpyware.com/

  John