HP elitebook 8530w mobile work: Memory module error capslock and numlock blinking 3 times

Similar Questions

• photos has not been loaded for weeks (usually the browser chrome on PC windows at work).  I tried now on some other computers and get the same error message and I report every time.  can I do or just wait for someone to fix it

  photos has not been loaded for weeks (usually the browser chrome on PC windows at work).  I tried now on some other computers and get the same error message and I report every time.  is there anything I can do or just wait for someone to fix it?

  If you want any help here, you'll have to tell us what the error message.

  Which report you errors to?

• LR6 Module Development: is my GPU work properly? Color 'flash' and "Live Preview rendering Time" feels long.

  Hello

  I don't know why, but in the Module development in LR6, it feels like excerpts Live are not comparable to those of the speed I expected now with GPU acceleration.

  SEE THIS SCREENGRAB VIDEO: https://dl.dropboxusercontent.com/u/5840419/lightroom6performance.mp4

  In this overview, pictures that I consult have been seen to all Standard size generated.

  Note: each photo is a Raw Nikon D800 and manipulations have been performed on it (as you can see in the video, many sliders have been used for the photo of grade).

  See what happens:

  -I click on the thumbnail of the photo

  -The large preview appears, slightly desaturated and "fuzzy".

  -a "Flash of Color" appears (the appropriate color saturation appears)

  -then a strong image (in short, as opposed to a soft extract)

  Overall, a process about 4 seconds each time.

  Is this normal?

  I don't understand why.

  And the GPU acceleration is enabled. GTX 670

  I have a descent system very:

  Operating system: Windows 8.1 Business Edition

  Version: 6.3 [9600]

  Application architecture: x 64

  System architecture: x 64

  Number of logical processors: 12

  Processor speed: 3.2 GHz

  Built-in memory: 32707,8 MB

  Real memory for Lightroom: 32707,8 MB

  Real memory used by Lightroom: 2284,0 MB (6.9%)

  Virtual memory used by Lightroom: 2351,0 MB

  Memory cache size: 699,3 MB

  Maximum thread count used by Camera Raw: 6

  Camera Raw SIMD optimization: SSE2, AVX

  System DPI setting: 96 DPI

  Composition of the Bureau enabled: Yes

  Exhibition: 1) 1600 x 1200, 2) 1280 x 1024

  Entry types: Multitouch: no, built-in touch: no, built-in pen: Yes, touch external: no, external pen: Yes, keyboard: No.

  Graphic processor News:

  GeForce GTX 670/PCIe/SSE2

  Check the supported OpenGL: past

  Provider: NVIDIA Corporation

  Version: 3.3.0 NVIDIA 350,12

  Rendering engine: GeForce GTX 670/PCIe/SSE2

  LanguageVersion: 3,30 NVIDIA via the Cg compiler

  Plugins installed:

  (1) Behance

  (2) substantive canon Plugin

  (3) Facebook

  (4) Flickr

  (5) HDR Efex Pro 2

  (6) home Plugin Leica

  (7) attachment Plugin Nikon

  Config.LUA flags: None

  Map #1: Seller: 10de

  Feature: 1189

  Subsystem: 35421458

  Revision: a1

  Video memory: 1987

  Map #2: Seller: 1414

  Device: 8 c

  Subsystem: 0

  Revision: 0

  Video memory: 0

  AudioDeviceIOBlockSize: 1024

  AudioDeviceName: Speakers (Realtek High Definition Audio)

  AudioDeviceNumberOfChannels: 2

  AudioDeviceSampleRate: 44100

  Build: not initialized

  Direct2DEnabled: false

  GPUDevice: not available

  OGLEnabled: true

  There are problems with the GPU. The first thing I would suggest you try is to performance tab in your Lightroom preferences and uncheck the box and see if that makes a difference. It has cleared up problems for many other users. The GPU acceleration seems to be a work in progress at this stage.

• Windows Update not working do not Error Message and Windows Defender cannot update Error Message definitions

  I have a laptop Dell 1501 with Vista Home Basic 32-bit.

  I ran CA 2010 Security Suite and you have scanned for Malware with regard to the Windows Update Error Message. He found none. I ran Microsoft Malware malicious tool, and it found. I ran Windows Defender and he found. I don't have CA and Windows Firewall to protect my computer and I have disabled both in trying to solve this problem of Windows Update and Windows Defender.

  I got this error 4 days ago. Here is what I tried:

  -I went on various Web sites, including Microsoft Support - and tried to solve the problem through services.msc and msconfig.exe. None worked.

  -J' noticed in msconfig. where it says start waiting next to Windows Update. There are 3-4 elements, which are affiliated to Windows Update and made sure they did not exist in the registry.

  -J' have to ensure that they were supposed to be automatic or manual under services.msc.

  -J' rebooted several times and nothing changes.

  Windows Defender does not update the definitions, and I do not know if this coincides with the release of Windows does not.

  I am at my wit's end and do not want to crash and burn my computer.

  I need serious help. Please, I beg you!

  Thank you.

  LRR100

  I had to call Microsoft. Alex tried to add registry keys and input upgrade.

  My Windows Update has almost been altered. It could be my mistake or it has become corrupted when running other services at the same time.

  I was sent a Windows 7 Home Premium Disc to upgrade and start over, as my Vista disk was corrupted as well.

  I would not recommend trying one of the suggestions listed on other sites. It's my personal opinion because I have in the past and it worsened my problem.

  I also wouldn't delete all programs (unless absolutely necessary) because I remove 4 MSMXL and he made their work more difficult.

  ________________________________________________________________________________________________________________________________

  Sometimes the only solution is to call Microsoft and they will evaluate if a charge of telephone support is necessary from the outset, before they run for your problem.

  Despite what you may have read, Microsoft Technical Support technicians are very efficient and kind.

  We inform you to open a slot during your day or even open your day for the problem to be solved.

  Mine took 2 1/2 hours, and they had to remind me the next day to make the order for the disk because it could not be done the same day.

  The more patient and kind you are, the best representative.

  Hope this helps and thanks for reading,.

  LRR100

• My desk blinking from time to time, I tried to restart, but the error remains.

  Original title: ErrorMy Office

  Hi!, developer of Microsoft and others.

  I experienced an error my computer. And I don't know what kind of error this, my desk blinking from time to time, I tried to restart but the error remains. Last night I also used my computer and it works fine and the next day all of a sudden the error appeared and I don't know why my computer gets this error? I took a video, please see this if my explanation is unclear to you, here is the link: click me

  Thanks in advance for your help. I really, really appreciate your concern. God bless you. :)

  Hi Jireh,

  Thanks for posting the query on the Microsoft Community Forums. You have reached the right place. Let us work together to find the cause of this problem and try to solve.

  This happens usually if the drivers for the graphics card is not updated correctly. Update your video card driver can often solve these problems. A driver is software that each device has to work with your PC. Here are the measures that take that might help to solve the problems of video card.

  I suggest you to see the following links for more information:

  Troubleshoot video card
  http://Windows.Microsoft.com/en-us/Windows-8/find-install-display-drivers

  Get the best display on your monitor
  http://Windows.Microsoft.com/en-in/Windows-8/get-best-display-monitor

  You can also see this Microsoft article:

  http://Windows.Microsoft.com/en-us/Windows-10/troubleshoot-screen-flickering

  Let us know the update after trying the steps above.

• MD3000 Raid Controller Module memory parity error

  MD3000 has two controllers. One of the controller does not have. SO I replaced it with a used controller, without work. All errors are gone, except a "RAID Controller Module memory consistency error".

  Recovery Guru recommends steps that I followed without success.

  Need help in this forum.

  Paul

  Hello Paul,

  What you need to do is on the replacement controller to pull the raid battery and wait about 2 minutes then reinsert it again. Also I want to try to do is to Flash the firmware on the system as well.

  Please let us know if you have any other questions.

• How to determine if all memory modules are working properly

  Ref: Pavilion a1102n, Windows XP 32-bit.

  I upgraded my memory from the computer by replacing the 2 existing modules of 256 Meg of origin with 2, 1 Gig modules. This gave me 1.97 GB RAM as shown in Control Panel - System - general.

  Recently, I added 2 more 1 Gig modules. This should bring my computer to the max memory for this product. When I checked as stated above, it shows 3.11 GB of RAM. HP note that, when you add the max memory, the total RAM may be slightly less than 4 GB, but loser 0.89 Gig seems excessive.

  How can I check to see if all 4 memory modules are working properly?

  Thank you.

  SubVetUSN,

  The total is correct. The average is 3.3, according HP link on your device.

• Satellite P200 - Parity Check / Memory Parity Error

  Hi all experts!

  After updating a driver, I get this above mentioned message.
  + Message ' hardware malfunction NMI Parity Check / Memory Parity Error.

  But just at the moment where the P200 falls in sleep mode. I can't wake up and have to do a hard reboot. Windows is starting and works perfectly and everything seems to be okay!

  Any idea?

  Thanks in advance!
  YB

  Hello

  This behavior can occur if a hardware component malfunctions, or if it has installed the damaged or incompatible drivers.
  I think that you should remove the driver updated or installed first.
  If this does not work, test the laptop with preinstalled system cool.

  Finally if this is insufficient, a hardware malfunction might be possible.
  In this case the RAM modules need to be tested as the first part.

• HP Pavilion DV71-4100 Memory Module failure

  Hello

  My product is a HP Pavilion laptop as follows:

  Product: ww181av

  Model: DV71-4100

  Series: [personal information]

  My phone worked terribly slow and I thought I had a virus.  Analyses have shown that I have not.  I ran HP diagnostics and came with a memory Module failure with the following information:

  Failure ID: m89jxt-5A76KO(or 0)-xdOO(or 00) 2 k-4o(or 0) 2eO (or 0) 3

  Part ID: 181AV

  Sorry for the question O/0.  I don't know if this is o or zeros.

  Is it a simple part replacement (IE a chip memory) and if so can I order and install myself?  Or is it something I need to take to an HP repair center in THE West somewhere (assuming there is one)?  An idea of the cost?

  Thank you!

  [Personal information]

  Hello:

  You should be able to do the replacement yourself. This is a great do it yourself project for the first time.

  The first thing you need to do is to determine which module of memory is bad (if your laptop has two modules are installed, and many of them do).

  I use a very technical but very effective method to determine which.

  First remove the a/c and battery power (always do when you work inside the laptop).

  Remove one of the memory modules. I leave the battery, then plug the power of a/c.

  Turn on the PC. If it starts, and that you do not get the failure error memory then you were lucky and found the bad chip on the first try.

  If it does not start or if you get an error, turn off the PC, unplug the unit, remove the bad chip and replace it with the first one you removed. The PC should now start and run OK.

  So, now that you have found the bad chip, you must know how much GB is. Normally, it's on the sticker.

  Just buy the same chip memory size with the same characteristics.

  You need a DDR3 PC3-10600 memory module.

  If you let me know which module of memory of size you need (2 GB, 4 GB), I'll post a link to a site that sells the memory at low prices.

  Depending on which chip the size you need, replacement costs must not exceed $40,00.

  Here is the link to the service manual for your laptop.

  The memory of the removal and replacement procedures are given in Chapter 4.

  http://h10032.www1.HP.com/CTG/manual/c02666747.PDF

• EliteBook 8530w pci simple communication controller

  I have an Elitebook 8530w that I upgraded from Vista to Windows 7 64 - bit SP1 Professional. Everything works fine apart from the reported errors we find no driver for Serial Port of the PC and the controller PCI of communication Simple. I applied all the drivers updated etc that I can find to the 8530w but no joy. Can you point me to a download location for the correct drivers?

  Thank you

  TR

  Hello:

  First install the chipset driver and restart, if you have not already done. First download listed is the one you want.

  http://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&DwnldID=20775&lang=eng&OSVersion=Windows%207%20(64-bit) * & DownloadType=.

  Go to Device Manager and click on both of your unknown devices.  Then click on the Details tab.

  In the properties of the drop-down list, select the second element (Hardware ID).

  After the first string of characters you see in the window.

  Those who will be ID devices and I can send you the link to the drivers you need.

  I'm sure that this driver will take care of the simple PCI. So, you will only post the a missing aircraft.  This can take care of both of them. I just don't remember.

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=3781677&prodNameId=3781682&swEnvOID=4059&swLang=13&mode=2&taskId=135&swItem=ob-77385-1

  I have the 6930p which is a smaller version of your model.

  Paul

• Pavilion DV2000 - NMI: parity check / memory parity error

  My laptop was working fine and all of a sudden I got this blue screen with this message:

  Hardware malfunction
  Call your provider of support material
  NMI Parity Check / Memory Parity Error
  The system is shut down

  I have try the recovery disk and the computer back to its factory setting. It will be fine for about a day and then the blue screen light up again. I have try that 3 times now with no luck.

  Can someone please? I'm getting really annoyed that I run my business using my computer every day and I can't continue to recover and reinstall everything every two days.

  The laptop has 150 GB of memory with two 1 GB of Ram.

  What do you mean by delete a module?

  The computer cannot even load into the window before it crashes with blue screen.

  * Just realized there is the notebook section. I have post the same problem on this article and close this one here *.

• TOSHIBA f3507g cannot connect to mobile broadband from 3G (error code 0)

  It's really a strange situation. Yesterday I installed the latest 3GRF POWER UTILITY and driver F3507g 3 G then inserted the SIM 3G, my laptop can connect to the internet (HSPA) normally, but today when I download and install the latest software WIRELESS MANAGER in others to check data and texting, but now my laptop cannot connect to the 3 G network but that laptop still the 3 G signal. I also tested for texting on my phone and it works but connect to the 3 G internet is impossible. I tried to uninstall all the drivers of 3G and reinstall it again, but it does not work. When I cheking troubleshooting, he said that "the operation of network connection mobile broadband failed with error 0". I use win7 and download the driver 3G [http://aps2.toshiba-tro.de/wlan/]. Please help me, thank you very much!

  Hello

  What operator and SIM are you using? It works if you connect through the Win7 built-in connection manager? That is to say through her view available networks?

  Since you are able to receive text Messages, you can register properly to the network. This should be a profile/network problem. It works if you create a manual Profile Manager wireless with the correct settings for your carrier?

  It works if you use square DUN? See Howto on http://aps2.toshiba-tro.de/kb0/HTD9802OF0000R01.htm

• EliteBook 8530w becomes extremely hot!

  I have an Elitebook 8530w for a few years now and for a few weeks, it's extremely hot, without the laptop even do anything just to be inactive in windows.

  I can bear high enough levels of heat with my hands, but the temperature of the air coming out of the exhaust on the left is so hot that I can't hold my hand in front of her. Today I need to download a software for my new office, so I used one of the USB slots on the left (near the exhaust), as the other 2 were occupied. After like 20 minutes, I removed my USB flash drive and almost immediately, drop it on my table, because the drive was too hot to handle.
  
  This is not normal, that last week I lift the rear of the cell upward in the air a bit for the fan sucks air much more easily, but it doesn't seem to work at all.
  Is this normal or is something wrong?

  Welcome to liquid.

  IM installing a new OS on a 8530w.

  After you have everything installed Vista I could barely touch the laptop.

  It was so hot.

  But on mine, there was little or no air flow coming out to the left upper exhaust.

  So I removed the keyboard. "" Two screws on the bottom and the four pieces of restraint between esc - f1, f4 - f5 and f8 - f9-f12-scrolling.

  In the upper left corner, remove the connector of the fan.

  Remove the 3 couple for the fan.

  Remove the fan and clean between the fan and the radiator fins.

  Replace in reverse.

  Let me know if you need more information.

• Installation of the 4x8Go memory modules on Mac Pro early 2009

  Can I install 4x8Go registered memory modules on Mac Pro 5.1 firmware installed early 2009 Mac Pro?

  I installed 4 modules, system preference, however installed 3 modules and 1 location of vacuum with the Red of error ON the CPU board memory.

  

  If you rearrange the same empty watch housing RDIMMs?

  If you use only two RDIMMs can you do this job to see the slow?

  What specific memory do you have?

  This

  http://eShop.MacSales.com/shop/memory/Mac-Pro-memory#1066-memory

  shows that only 16 GB DIMMs is registered.

• Tecra R10 - how to remove the memory module?

  Hello!

  How to remove the memory module?

  Get the following message and for me, it means that one of the modules is broken:

  Out of memory error
  Address = H 00034000
  Read Date = H 28034000
  Write data = H 00034000

  For my opinion, the computer should start up again when I remove the memory broken slice?

  The Australia has soon

  Hello

  You can easily remove the memory modules.
  I think that the Bay is placed at the bottom of the unit.
  Remove the screw that is blocking the Bay, and you will have access to the module.

  Here is a video of how do this on another Satellite L500 laptop. But the procedure is not very different on Tecra R10
  http://forums.computers.Toshiba-Europe.com/forums/Ann.jspa?annID=81

  I hope this helps a little