HP Envy 15 model E1P05AV: HP Envy 15 wireless upgrade card

Similar Questions

• HP envy 15 notebook PC: driver HP Envy 15 Wireless Network adapt

  I want driver for HP ENVY 15 wireless network adapter

  REF: L0C92EA #ABV

  Operating system: windows 7 Enterprise 64-bit

  Hello:

  You need these drivers wireless and bluetooth for this card...

  Driver LAN wireless Broadcom

  File name: sp69014.exe

  Software and driver Broadcom Bluetooth 4.0

  File name: sp66402.exe

• HP Envy Touchsmart: Failure on Envy laptop wireless adapter

  I tried to do the following in the suggested troubleshooting tips.   I opened a run prompt and type cmd.   I raised my privileges "Run as Administrator".    The open window with administrator: command prompt at the top of the page and followed steps 2 and 3.

  Reset the TCP/IP settings on your PC:
  1. go to your departure

  the screen menu and type CMD.
  2. right-click on the command prompt icon and select run as administrator.
  3. in the window that opens type "netsh int ip reset resetlog.txt" without the quotes and press ENTER.
  4 restart your PC and test.

  It can also help to reset the winsock catalog:
  1. go to your start screen/menu and type CMD.
  2. right-click on the command prompt icon and select run as administrator.
  3. in the window that opens type "netsh winsock reset" without the quotes, and then press ENTER.
  4 restart your PC and test.

  However, this is the result I got.     Even if I ran as administrator, he gave me an access denied message.

  C:\Windows\System32>netsh int ip reset resetlog.txt
  Global delivery, OK!
  Reset the Interface, OK!
  Neighbor reset, OK!
  Path reset, OK!
  Reset, failed.
  Access is denied.

  Reset, OK!
  Restart the computer to complete this operation.

  Why my computer tells me that access is denied when I run this function recommended as an administrator?

  This laptop will remain not connected to the internet.   Every 2-3 minutes that I have to turn off Wi - Fi and reconnect and then it will work for some time before she starts giving me messages 'server not found '.

  I reinstalled the wireless driver and the wireless button pilot.

  Donna

  Hi @dberkley ,

  Thank you for visiting the Forums HP's Support and welcome. I looked into your problem on your laptop and get HP ENVY with wireless connections. Here is a link for the wireless connection troubleshooting.

  I would use the network of Windows 8 and resolution of the problems of the Internet section.

  I looked for a solution for this and that they indicate on the forums that if you change the channel of the router on a different channel, that might solve the connection problem.

  You could disable IPv6 for the laptop. Some say this helps.

  Solve this problem Microsoft Fix it 50413 here is a link to help as well.

  Make sure that all of your windows updates have been supported and discovered on the network.

  Hope it will be useful.

  Thank you.

• HP Envy 5530: Since upgrading to windows 10, my laptop cannot see my HP Envy 5530 iwireless printer

  I have upgraded to Windows 10, since then my pc can't find my HP Envy 5530 wireless printer. I downloaded some sort of doctor scanning HP according to a previous post on this forum, but it does not work and my pc cannot see my printer yet. Please can someone help? My laptop is a Levono Idepad.

  Hey @Rayprinterman,

  I see that you have some problems with printing to your craving 5530 e - all - in - one printer after upgrade to Windows 10. I can help you with that.

  To start, make sure that the printer is plugged directly into a wall outlet, not a surge protector. Once done:

  1. Turn the printer off.
  2. While the printer is turned off, disconnect the power cable from the back of the router for a minute.
  3. When the lights come back on the router, turn on the printer.
  4. Close any programs you have open on your PC.
  5. In your search type in printers bar and open devices and printers.
  6. Right-click on any icon of your printer listed.
  7. Click on remove the instrument.
  8. Repeat for all other icons of your printer listed.
  9. Click Add printer, and follow the prompts to add a new queue for your printer.

  Please let me know the results after following the above. If this allows you to print, click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• HP ENVY 15-k253ca: lower HP ENVY 15-k253ca upgrade to Windows 7

  Downgraded to Windows 7 default Windows 8.1. In the BIOS enabled Legacy Support, Secure Boot option is disabled, then selected the drive internal CD/DVD-Rom as boot option.

  Does anyone know the number of brand and part of the controller wireless LAN? As I tried "Realtek RTL8723BE/RTL8188EE 80211 b/g/n Wireless LAN Driver" at HP, did not work.

  Hello:

  According to the list of parts for your laptop, it has a WLAN11AC + BT4 1 x 1 USB + PCle HMC MOW.

  http://PartSurfer.HP.com/search.aspx?SearchText=J9K76UA

  Part number tells me that it is an Intel Dual Band WIRELESS-AC 3160, for which you can get the drivers wireless and bluetooth below...

  This package provides the driver to support the Intel 7260/3160 Wireless LAN card in the laptop models running a supported operating system.

  File name: sp69038.exe

  This package contains the installation package driver for the Bluetooth of Intel in the laptop models running a supported operating system.
  
  NOTE: so that this package to install correctly, the previous package should be removed (as appropriate) before running this update of the driver.

  File name: sp69039.exe

• I have an iPhone 4S model A1387. I want to upgrade to ios 8. I currently have ios 7.1.2 (11D257). When I try to update via iphone or itunes on my mac, the answer is "your software is up-to-date." How to upgrade to ios 8?

  I have an iPhone 4S model A1387. I want to upgrade to ios 8. I currently have ios 7.1.2 (11D257). When I try to update via iphone or itunes on my mac, the answer is "your software is up-to-date." How to upgrade to ios 8? I need for a medical application that requires ios8 or above.

  Force restart your iPhone.

  Press and hold the Home and Sleep/Wake buttons for at least ten seconds, until you see the Apple logo.

  And then tap settings > general > software update

  If this does not help, make sure that your Mac running the latest version of iTunes.

  You can do this by clicking on your top  Apple left of your screen.

  In the drop-down list, click: App Store

  After the opening of the App Store, select updates in the upper part of the menu of the window of the App Store.
  

• Model 2347-E86 T430 - possible to install a COMPREHENSIVE wireless network card?

  Hi, I'm buying a model opportunity T430 2347-E86. Can I install a Wireless WAN card module in this model? I think about the purchase of the Sierra Wireless 3 G Card MC8355 Gobi3000 HS2430 HSPA + card EV - DO REV A. thanks.

  Hello

  T430 supports the mini card pci-e wwan. But Lenovo portable computers will not work with Gobi 3000 HS3240, because of this model (HS3240) is designed for HP laptops. So, T430 same primer not with this modem installed.

  If you want to get the 3 G card, buy modem with Lenovo service p/n - a) RUF 04W3785 (it's the Gobi 3000) or b) 04W3786, 60Y3297 (H5321 Ericsson). Note, you might be interested in getting 3 G/LTE - Sierra mc7710, FRU 04W3821 card.

• I have an ACER Aspire One model ZG5/A150 can I put the card WIFI B/G card WIFI B/G/N

  I have an ACER / Aspire One model / ZG5 / A150 may update the WIFI B/G card for a WIFI B/G/N card?

  My system (Windows XP) will make use of the new speed of the upgrade card?

  If you are familiar with the process, yes you could upgrade the wireless card and Windows XP would be able to use the speed of upgrade, subject the new wifi card you select has Windows XP drivers available.

• New model: HP Envy 15 t Upgrade HD SSD or mSATA SSD?

  Hi all

  I read several threads on the upgrade of the disk for SSD and it seems that everyone else has managed to do.  My question is, is there an advantage to upgrade to an SSD HARD drive or simply add in mSATA SSD?  I currently have a network drive that contains most of my data such as music, photos and videos, so I don't think that I need more capacity on my hard drive.  That being said, I had planned on buying an SSD of 256 / 240GB, it's just a question of which one get? a regular SSD or mSATA SSD?  Thoughts?  Comments?  Concerns?

  Mike Lee

  on a side note: I envy 15 new t... I really wish that they would have changed the name of the template to something completely different because the prefix is the same as their old model... stupid...

  Get a 2.5 inch SATA SSD ordinary. Very slightly slower than a WSSD but still much faster than anything else. Try to configure the WSSD as boot drive is a huge problem.

• HP Envy 15 t-j100: HP Envy 15 t-j100 card system

  Hi all!

  Recently, I brought my laptop looked at / repaired. The local technician told me that my laptop computer motherboard is dead because of the updates of Windows 10 does not well with my old operating system to Windows 7 (originally, my laptop has Windows 7 Home, last July I have upgraded to Windows 10). I started looking for a new replacement system card, however I have a few questions. I watched the maintenance manual for my laptop and can not know what card replacement system is adequate or what they all say. The serial number of my current motherboard in my laptop is 720566-001. I googled this number system and keep find results with 720566-501 and 720566-001 in the title for the same motherboard. Most of the advice I find on eBay also have a number like 720566-501. My question is this: will I be able to use a map of system 720566-501 to replace my current 720566-001 motherboard?

  Additional details:

  -12 GB OF RAM

  -Intel I7 2.2 Ghz processor

  Tough - 1 TB SATA disk

  -GeForce graphics card (not sure what type)

  [Personal information]

  -Nr E1P05AV

  Hello

  There are dozens (or even hundreds) of models or products HP Envy 15, your computer is a HP Envy 15 t-j100, which is a machine CTO. You can see 720566-501 is for many different models/products:

  http://PartSurfer.HP.com/search.aspx?SearchText=720566-501

  for your machine, its number is 720566-001. 720566-001 and 720566-501 can be VERY similar but not identical.

  Kind regards.

• HP Envy 15: wireless connection

  What is the best driver for HP Envy 15 q5tx 8.1 window 64 bit, I have Realtek, my wifi connection is not good.

  Realtek version 8.024.1218.2013

  Date of 18.12.2013 drive

  But my HP I get the HP company this year.

  1.  Network adapter-

  Device Bluetooth (personal area network)

  (Protocol RFCOMM TDL) Bluetooth device

  Intel (R) Dual Band Wireless-AC3160

  Realtek PCLe GBE create controller

  2 / all are updated regularly.

  3.  My HP Support Assistant connection-

  My devices-

  Wired LAN 1 - not connected

  1 - no connected wireless LAN

  Bluetooth connected 1 - no

  What is c?

  That's what I have, why my Wifi doesn't connect at all times? What else do I need?

  Now - 1 sec I'm now and then dry - I'm not connected and suite, and - throughout the day

  Help me please.

  Elil

  Hello:

  I mean by this is... I think that your laptop has only a single antenna, and that is why the reception is so low.

  For some reason, HP wants to include only 1 antenna wireless in notebooks with this model Realtek wireless card.

  All wireless cards have two terminals to connect antennas to-including yours.  A main terminal as well as an auxiliary terminal.

  The second wire connects to the auxiliary Terminal to improve wireless range and a reception.

  So basically your card is only half the reception should be with a single antenna.

• HP Envy 13-d001no: upgrade SSD on a new HP Envy 13 m2

  Hello!

  I just got my HP Envy 13-d001no. As I expected I really enjoy them until now, but I am interested the upgrade to a faster SSD with more storage on this subject. I'm looking at two different drives, namely the Samsung 850 EVO m2 and the Samsung PRO 950 m2. Both drives are m2 (2280) form factor, but they differ in that the EVO 850 uses a SATA 6.0 Gbit/s-interface while the PRO 950 has a PCIe interface.

  I am not fully aware of the differences between these interfaces. I know that PCIe allows faster speeds, but they are both compatible with the new HP Envy 13? I find anywhere which interface is the exact shape of the SSD factor currently installed and I don't want to take the risk of buying a new drive only for him is not to adapt or not to work on the laptop.

  According to the HP ENVY laptop (model numbers used: 13-d000 through 13-d099)-Maintenance and Service Guide of, this model supports the following:

  SSD drive
  Serial ATA M2 storage
  Support for the following SSD drive configurations:
  512 MB M2, SATA-3, support triple cell level (TLC)
  256 MB M2, SATA-3, support the TLC
  128 MB, M2, SATA-3, support the TLC
  128 MB, M2.2280, SATA-3

  On this basis, it would seem that the Samsung 850 EVO m2 is the correct upgrade for your computer.

  If you have any other questions, feel free to ask.

  Please click the 'Thumbs Up' white LAURELS to show your appreciation

• 23 - c115xt envy: can I upgrade my card wireless a faster card with dual band and Bluetooth capabilities?

  I want to speed things a bit and gain some Bluetooth capabilities. I now have the RALINK RT53, and I'm looking at the 7260NGW Intel Dual Band Wireless-AC 7260 802.11ac as a replacement.

  Is this feasible?

  http://www.Amazon.com/DP/B00GUNZUG0/ref=wl_it_dp_o_pC_nS_ttl?_encoding=UTF8 & colid = S2UV2M8FDNQS & colii...

  Thank you.

  Hi there @Custerboy
  
  Welcome to the Forums of HP Support! It's a good place to find the help you need, so many other users, the HP experts and other members of the support staff. I understand that you are looking for an update for the WiFi card installed in your all-in-one. I'm happy to help you.

  In looking at the options listed in the specifications for this model wireless:

  HP ENVY 23-c115xt all-in-One product specifications and configurable Options

  These are the available choices:

  • Wireless 802.11b/g/n LAN featuring single-band (2.4 Ghz), 1 x 1

• TouchSmart HP Envy 15-J104sa memory card reader does not

  I took delivery of a HP Touchsmart from Envy 15 - J104sa, running Windows 8.1 this week and the internal memory card reader does not work. It does not recognize SD cards (I tried more than one) and continues as if nothing has been inserted; Don't display an error message. The cards work on my previous HP laptop. The only way to get the laptop to show an inserted SD card is to run the driver software update (http://ftp.hp.com/pub/softpaq/sp63001-63500/sp63415.exe) whenever an SD card is inserted; This must be done with the card in the reader. If the software is running and then the card nothing happens. If the card is ejected and then re-inserted (or a new card inserted) it is not recognized and the process must be restarted and the driver reinstalled even though nothing has changed.

  Can someone please help me with this question or I'll have to go back to the HP laptop. I do a lot of photography so being able to read fast and reliable SD card is extremely important for me; It is not a problem, I was expecting a new laptop all right out of the box.

  Thanks to you all.

  Unfortunately not, updates of driver solves the problem, but an update of the BIOS through the HP helper application seems to have resolved the issue. While I appreciate there were not specific drivers available in my opinion, it is difficult to accept that HP should be able to release a model where they know the equipment are not fully supported by the operating system and in this case does not work.

• Envy 15-j151sa: upgrade Hp Envy 15

  Hello, I think the upgrade of my Envy 15 - j151sa AMD A10 8 GB ddr3 RAM 1 TB SSHD to its maximum.

  I think that to upgrade to SSD, so what is the maximum it can handle if even possible?

  He manipulates ddr4 RAM? If not, what is the maximum ddr3 RAM and RAM speed it can handle?

  Is it still useful to upgrade?

  Thank you very much

  Hello

  1 1 TB SSD should be ok, the vehicle currently has a slow HARD disk: 1 TB 5400 RPM SATA, upgradeing to SSD will help a lot:

  http://support.HP.com/us-en/product/HP-envy-15-notebook-PC-series/5401187/model/7255485/document/c04372563/

  2 No, DDR4 RAM does not and will not, work

  4. it supports th after configuration, 1600 MHz max.

  Two customer accessible/upgradable memory module slots
  Support for dual channel DDR3L (1600 MHz)
  Support up to 16834 MB of RAM in the following configurations:
  ● 16834 MB (8192 MB × 2)
  ● 12288 MB (8192 MB + 4096 MB)
  ● 8192 MB (8192 MB × 1, 4096 MB × 2)
  ● 6144 MB (4096 + 2048 MB)
  ● 4096 MB (4096 × 2048 MB × 2, 1 MB)

  For the last question: SSD and RAM more will give new life to your machine.

  Kind regards.