HP Envy 17 2002TX - impossible to repartition the HDD - RAID 0 question?

Similar Questions

• HP ENVY spectrum XT impossible to install the BIOS update (processors intel)

  The name of the product of my laptop is HP ENVY spectrum XT and it runs on Windows 7 Home Premium 64-bit and its serial number is CND2340MHX, a notification came in the Wizard support for hp advising me on the BIOS update, when I click on the download and install it downloads the installation file but does not install it and when I checked the action record States that it is impossible to install. Is there a reason to fail?

  Hello Moodster1994,

  Please take a look at this document, which provides for the restoration of your BIOS troubleshooting steps.  Please let me know if this helps solve your problem.

  Good luck!

• HP ENVY 17 - 3070NR: cloned OS of the HDD to the SSD.

  Hello

  I have an old laptop HP Envy 17 (3070nr). A few days ago I installed a Samsung SSD (750 GB) 840 evo in Bay 2 and cloned the OS from the primary HARD disk, which has 3 separate partitions (750Go - Hitachi). Then, any drive (HDD or SSD), I connect to bay 2, it does not appear in the bios or windows disk management.  The two drives (SSD and HARD drive) to start windows until they are installed in the first Bay that is Bay 1. What could be the problem, it has completely baffled me.

  Your help would be very appreciated. Thank you.

  Kind regards

  Hello

  They have some kind of signature so work only on the main Bay. I normally

  (a) mount the old HDD to ANOTHER computer using external enclusure

  (b) to move all the files users

  (c) re - format and merge partitions,

  (d) put to the second span.

  (e) working on it like a new HARD drive.

  Kind regards.

• HP Envy 100 - impossible to activate the scan from the printer

  I use an iMac end of 2012 and spin the Mavericks. Envy is connected to my WiFi.

  I was never able to get the urge to turn on a scan from the printer. When I press on the analysis on the printer, I get 3 options and choose 'computer '. I can get some information from introduction to scanning the computer. He says this analysis for computer is activated automatically when the printer is first set up and I need to have installed the HP printing software. This means to me that something has not been properly Setup and I can't work it out. I just updated my software as a result of Mavericks. I regularly print to the printer and am able to activate a scan of my computer.

  I read a few posts on the software uninstallation. If necessary, I don't know what needs to be uninstalled and reinstalled and how I could do that.

  Can anyone help?

  Thank you

  HI - my apologies for the slow response.

  Would it not possible to check to see if "Scan to Computer" is enabled in the utility application from HP?  This application must be in the folder Applications/Hewlett-Packard.

  Once the application opens, you may need to select your device if it is not already selected.  The configuration option "Scan to Computer" should appear at the bottom of the document window (see attachment "Utility HP - selected ENVY").

  Try to open the "Scan to Computer" configuration item and display settings.  Please refer to attachments "utility HP - Scan to computer do not activated" and "Utility HP - compatible computer Scan" for what that might look like if the feature is enabled or disabled.

  Let me know what you see.

  Also - since your connection to the printer on a wireless network, have you tried to move the printer closer to the router or wireless access point wireless?  I'm curious to know if there may be some intermittent network connectivity that is to interrupt the function computer scanning.  I would try to move the printer right next to the wireless router access point / wireless to see if that helps the issue.

  I will continue to work on this issue for you to get the help you need.

• How the batch of photos of change in Version 2.0 of Photos... impossible to find the function.

  How the batch of photos of change in Version 2.0 of Photos... impossible to find the function.  If it has been deleted to "improve" the Photo experience?

  Lot, what exactly will change?

  Titles, Descriptions and capture date - Yes.

  Select the images you want to change the title or the description and to set-up the info (command-i) pane.  Enter the title or the description in the appropriate field and he will be assigned to all selected pictures.

  

  If you want to batch, change the title with sequential use attached many Applescripts provided by users in the Photos for Mac user tips section.

  Batch change/correction of dates is provided by the Image ➙ setting Date and time menu option:

  

  

• Impossible to disassemble the repair disc

  Hey out there - I hope someone can help me with a solution to my problem!

  My drive external DRIVE (WD MY Passport) decide to stop playing on the same team earlier today.

  My Mac recognizes the drive, but won't let me access to his files directory - when you try to check the diskutil drive tells me it needs to be repaired, and in trying to fix it, diskutil says that it is impossible to disassemble the disc... > _ <

  But when accessing the control through the recovery partition I can also check and repair and it will come just by saying "all is * A - OK... When you use the diskutil through the recovery partition I can even access to its files directory, and it shows me all the files without any problems...

  If it becomes increasingly strange...

  Y at - there someone out there who has an idea of what to do with it?

  Best regards

  Stop your Mac. Now start with the SHIFT key is pressed. This will start in Safe Mode, with all extensions turned off. Safe mode is slow to start, so give it time, it checks a lot of staff. If it works fine in Safe Mode, restart normally. If it works now, you are finished.

  If the problem comes back after a reboot, you have an extension conflict. Disable all extensions via system preferences. To isolate which extension is at fault, turn on an extension at the same time, restart in the meantime, until you find the bad Apple.

• Impossible to change the nationality

  Impossible to change the nationality of my Apple ID because I €0.04 on it. How can I move or delete?

  See the next topic If you can't edit your iTunes Store country or region - Apple Support

  You must spend your balance before you change stores.

  If your credit is less than the cost of a single item on the iTunes Store, App Store and iBooks Store, you can Add a credit card on your account. When you purchase an item, you will use the remaining store credit and charge the rest of the purchase to your credit card.

  If you do not have a credit card, contact the iTunes Store support.

• Impossible to activate the dark mode in Firefox 39.0 with subject: config.

  After you have installed the 39.0 beta of Firefox, I was impossible to activate the dark by topic mode: config.

  That's what I changed:
  Browser.devedition.Theme.Enabled: true
  devtools. Theme: black
  lightweightThemes.selectedThemeID: [email protected]

  I use "Fox, but better" plugin and I have to disable it without success.

  guigs2 said

  Hi CiRiX,
  I understand that you are using a dark theme and have changed the settings in topic: config, that could change how the button toggle works in the themes section for about: addons...

  It is possible to reinstall the extension, or try these troubleshooting steps:

  • Troubleshoot extensions, themes, and issues of hardware acceleration to resolve common problems of Firefox

  I managed to fix it by clicking Activate and then deactivate it on another theme.

  Thanks for your help!

• Impossible to install the Safari extensions; error message

  Impossible to install the Safari extensions; error message

  Hello

  Make sure that OS X and Safari are up-to-date.

  Open system preferences > App Store, then click on: check now

  Your profile says your Mac works v10.11.1. The v10.11.5 update is available. This is maybe the reason why you can not install the Safari extensions.

• iPhone 6 + will not except that the load rope nor any what lightning male. Impossible to recharge the iPhone.

  iPhone 6 + will not except that the load rope nor any what lightning male. Impossible to recharge the iPhone. Male/female connection not relieve tight. Advice\help would be appreciated.

  Try a different cable - preferably a certified one MFI

  If this does not work

  Please take a genius appointment at an Apple Store, or select another authorized service provider.

• Update iPhone 4s to 9.2.1 says: impossible to verify the update you are no longer connected to the internet. but I am connected through wi - fi.

  Update iPhone 4s to 9.2.1 says: impossible to verify the update, you are no longer connected to the internet. But I am connected by wi - fi and I get an email on the phone. My existing operating system is 6.something.

  Go to settings > general > storage & use iCloud > manage storage (the first) > and if there is an update, delete it. Then go to settings > general > Software Update and try again.

  If that doesn't work, try updating through iTunes on your computer.

• Impossible to copy the text to clipboard error - I had tried everything include uninstall firefox and re install. I tried to disable all plugins and addons. I have to c

  Impossible to copy the text to clipboard error - I had tried everything include uninstall firefox and re install. I tried to disable all plugins and addons. I have to click 20 times on text to paste in all websites. What should I do about it? I use FF 22.0 worm, win 8 and the problem just a few weeks. Thank you

  You have zonealarm, if if this is the problem.

• How to remove adds that cover the text making it impossible to read the text

  When an item is open, run to the bottom of the article an add is superimposed on the text makes it impossible to read the details of the new. Any attempt to remove fail it and the result of the opening to add it. How can I block the inclusion of these adds?

  This happens on all websites or only on certain sites?

  These messages may be generated by an add-on. Could disable you all THE modules critical or unknown here:

  • Firefox orange (or the Tools menu) button > addons > Plugins - particularly PriceGong «»
  • Firefox orange (or the Tools menu) button > addons > Extensions

  Then restart Firefox and revisit the problem pages in order to see if you turn it off.

• Google Cloud Print setup - impossible to analyze the capabilities of the printer

  I am trying to add my CP1525nw to Google Cloud Print as a Cloud, and not as a LOCAL printer printer, however every time that I add my eprint email I get the following message. "Impossible to analyze the capabilities of the printer" - I tried for public and private use for eprint settings with no luck.

  Any help would be greatly appreciated.  I tried the reset email with no luck...

  EDIT - 01/04/11:

  I chatted with HP support, and although the representative was extremely courteous, they could not help me.  The support agent assured me that the matter would be taken at a higher level and looked so I hope that we can have a resolution here shortly.

  EDIT - 04/04/11:

  Received a response from the original HP rep that I chatted with online.  In short, it was not able to find a solution and States, that the question will be sent upwards to the highest level of technical support from HP...  We shall see.

  EDIT - 05/25/11:

  After 2 months of waiting, HP has corrected the problem.  Don't forget to upgrade to the latest firmware and check all the settings before continuing.

  The fix came from the side server - this defiinitely had nothing to do with the firmware.  I've updated on Monday for the latest on the HP website and it was still not working.   The gentlemen of tech support that helped me sent me an email a few hours after we talked, saying the sea a fix was to come.

  Nevertheless, I am happy without worrying how the fix is here!

  It took only 2 months to fix, but I'm glad it is.

• Satellite U400-112: impossible to format the local drive (damaged MFT?)

  Hello!

  I had a pretty serious problem with my HARD drive.
  250 GB HARD drive
  C: 116 GB - NTFS - Windows XP (Vista initially)
  D: 1, 5 GB - NTFS - (Vista Recover?..)
  E: 117 GB - RAW (was NTFS prior to crash)

  Local drive E: MFT have been damaged because of the virus attack (I hope not because of my madness!). It's NTFS, now it's RAW. I got all the necessary data partition with program ZAR, but all my attempts to recover or just the format E: remained unsuccessful.
  None of the defective sectors found on the HARD drive. Standard Windows tool to format the disks fails: 'it's impossible to finish the formatting of E:

  Before this problem with the E: drive, I had several problems with HARD drive. I have never divided re discs, to Partition Magic from the beginning he identified incorrectly. I tried Partition Magic 7 and 8.
  Link: [error screensaver | http://cs1498.vkontakte.ru/u169802/154397/x_3a82b4fb.jpg]

  The problem is that the special programs (I tried "find and Mount") also could not identify partitions to correct the defective MFT. I thought that low-level format can help me, but I heard, that the use of all applications for other producers can probably destroy my HARD drive. Are there only special applications of Toshiba developed for such cases? Or you can advice me something else?

  Thanks for your help!

  P.S. These applications did not help me:
  Find and Mount (can't find the HARD drive)
  Acronis Recovery Expert (does not find the HARD drive)
  OnTrack EasyRecovery Professional (does not resolve the error, but help to recovery data)
  HDD Regenerator

  Thus you get back all your important data?

  I would like to just launch Recovery to restore the HARD drive to its factory condition. If the recovery fails, you can try to delete the partitions with FDISK from a startup MS-DOS disk. Free bootdisks can be found at www.bootdisk.com

  FDISK can also repair a Master Boot Record by running this command: FDISK/MBR
  But it is not 100% reliable, it could cause more harm than good.