HP-envy-17-j141na

Similar Questions

• HP Envy 17-j141na: recovering a system after 'repair '.

  I recently had a hardware failure on my laptop and my backup data and sent it for repair

  The only repair option that was given to me is to erase completely and factory to restore the operating system. In fact, what did the repair people has been remove my drive and replace it with a new vacuum waiting to be set up with Windows 8.

  Of course, I want to go back to the situation where I have a viable version of my laptop and apparently the only option I have to do is to re - install all software! (I think that 'like', which could take days, I'll have to contact all by software publishers to bring them to re-license a lot of £1000 of software I have on there it will break and I'll have to do it again!)

  So I turned off the screen install Windows 8 and completely (and I mean completely) the laptop brick. When it turns on it flashes the caps lock and will not work even BIOS recovery, ignores F10, F2 etc.

  I contact support, and they are absolutely insistent, that I'm going to need all reinstall. So I was wondering if anyone knows what is happening.

  The system is built around UEFI?

  The system has been improved in the UEFI?

  I'll be able to go in the installation process of Windows 8, upgrading to 10 and then switch to my old drive?

  I will be able to configure the system as Windows 8 and then put in place so that I can dual boot from my old drive?

  If I put all this from scratch what steps should I take to avoid this recurring situation.

  I am also concerned by what happened to my old drive that came with the laptop. HP support assure me that they treat all the personal in compliance data consider but not have given me any indication whether if the drive that was removed has been removed safely (wipes x 35 times) and reformatted or destroyed. So if it's wrong, yet once I need to find how to partition the data on the laptop, so I can send it without composed of my personal data.

  So, am a feeling that I have a laptop that I can not put the data of a personal nature, I can't use it for this purpose, I bought it to left (i.e. to install my software companies and lead by the activities of work at home) and now is just a really expensive browser?

  Appreciated by any reflection on a way forward.

  Hello @elcockh,

  Welcome to the HP Forums!

  I read your message and understand that your HP Envy 17-j141na does not work correctly. I have studied the issue and have developed a possible resolution. First of all, please perform a reset. Once this is done, please follow the steps described in this document:

  Computers laptops HP - computer won't start (Windows 8)

  The system is built around UEFI?

  The system has been improved in the UEFI?

  The system has UEFI functionality in the BIOS, allowing it to have secure boot and other features.

  I'll be able to go in the installation process of Windows 8, upgrading to 10 and then switch to my old drive?

  I will be able to configure the system as Windows 8 and then put in place so that I can dual boot from my old drive?

  If I put all this from scratch what steps should I take to avoid this recurring situation.

  If you succeed in installing windows 8, and then upgrade to windows 10; then want to install your old drive and it is still in working condition, you can trade. I suggest you perform a clean Windows 10 installation. If you are able to install the old drive in accordance with the specifications of the maintenance and service guide and know how to set up a dual boot and the old drive is in working order, then you can dualboot. The best things to do to avoid that the faulty laptop is to reduce heat and make sure it is updated and perform regular maintenance.

  Tips to use, carry and protect your laptop from HP

  HP Notebook PC - cleanup your PC laptop

  HP computers - tune (Windows 8) slow system performance

  HP computers - create a recovery Image on disc or save a recovery Image on a USB Flash drive

  If the document does not have you helped to solve the problem, try to restore the BIOS.

  Thanks, I look forward to your response with the result.

  If this post helped you, feel free to click on the thumbs up!

• Envy 17-j141na: a USB 3.0 port only works on USB 2.0

  Hello

  I have a HP Envy 17-j141na (product number: J0C16EA #ABU) running Windows 8.1.  I recently tried to connect a Sata hard drive via a USB 3.0 enclosure and found that the right rear USB port works with a USB 2.0 cable and any USB 3.0.  There is no problem with any of the three other no ports just this one.  Grateful for any help.

  Thank you.

  Hello Malygris1,

  Thank you for your help and suggestions.  I investigated further and found that the problem had become a problem on the port adjacent to the original track and then there are two with the same problem.  I was struggling to believe I had lost a second port and so took risks on the purchase of an another leader of a different even if manufacturer initial lead was again with the Cabinet.  The result was successful with all USB 3.0 ports.  I can only assume that there was a faulty connection in original mind that failed when it was routed to one side of the laptop and not the other.  Thanks again, I'm certainly glad that the fault was not in the computer.

• Add second disk to the Envy 17-j141na?

  I just removed the back my new 17-j141na to see what size drive I needed to update and the space is there for a second drive.

  Is it possible to buy the cable necessary for deposit in another drive, if so where would I get one from?

  Mike

  Newmodeus.com

  

  http://www.newmodeus.com/shop/index.php?Main_Page=product_info & cPath = 2_5 & products_id = 542

  I have a series of 17 t - j000 Envy which uses the same card and can report that it works very well. Be sure to install the little for the ribbbon drive zif connector is a bit fragile.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• Drivers for HP Envy 17 j141na - Compatible with Win7?

  Hello

  I brought a HP Envy 17 and immediently restored to Win7, because it was of Win8 out of the box. On page pilots he seems to have Win8 in the drop-down list (http://support.hp.com/za-en/drivers/selfservice/HP-ENVY-17-Notebook-PC-series/5401174/model/7200325)

  I tried to install a driver wireless, but in vain. Display drivers are not no longer works. I think that some have, but it feels not compatible

  Where can I get Win7 drivers please?

  You are the very welcome.

  Here is the support page for your specific model... There is too much drivers W7 for her.

  http://h22207.www2.HP.com/us-en/drivers/selfservice/HP-envy-17-J100-notebook-PC-series/5401174/model/7200325

• HP Envy 17-184na and Envy 17-141na

  I was comparing prices from different stores on a laptop computer called the

  HP Envy 17-j184na and found one called the HP Envy 17-j141na. Both laptops I found have model names different but seem exactly the same for me, so my question is:

  What is the difference between the Envy 17-j184na and 17-j141na?

  j 184na:

  http://WWW8.HP.com/h20195/v2/GetDocument.aspx?DocName=c04332225

  j 141na:

  http://support.HP.com/us-en/document/c04356668

  Only quickly obvious difference is the hard drive. The ordinary reader with 141 5400 RPM and 184 has a hybrid drive with a 8GB flash cache which should improve performance a bit.

• pictures 1.0.1 quit unexpectedly after printing on HP Envy 5640

  Hello

  I just bought a HP Envy 5640 printer.

  It works very well, but every time I have to print a photo in Photo 1.0.1 NICU OS X 10.10.5, Photos will be leaving after that print is sent to the printer.

  The photo prints fine, but needs pictures to be restarted every time.

  Does anyone have the same problem?

  Any solution?

  Thank you.

  I've not seen posted here - but since you are more than a year behind in updates, bug fixes and new features, you can see a verry old bug that has been fixed many years ago for people who follow to this day - unless he ia a clue right for you m = not updated I suggest you backup and update of OS X Sierra = and Photos 2.0 - this never can solve your problem

  LN

• I have a MacBook Pro, who hates contact my HP Envy 7640 printer all-in-one. Printing can take as long as 10 minutes! If it prints at all! Does anyone have similar problems?

  If I use my iPad to print a photo there is no problem, but if I use the Macbook for the same function, it will be either print it after a long period of time or he'll quit and say "Printing cancelled!" It seems that these problems started after the update. I am running El Capitan 10.11.6. In addition, when you use Hallmark Card Studio for Mac, as soon as I use two back, it will print the first side no problem and then he hangs up and ends by spit the paper without printing the second side! When I got to the printer, everything worked fine, but now...

  Maybe:

  e-with-OS-El-Capitan/td-p/5417344 http://h30434.www3.HP.com/T5/Printer-Software-and-drivers/HP-Envy-7640-compatibl

• How to print multiple copies on a HP Envy 5540

  I'm running OS X 10.7.5. on an iMac. I recently bought a HP Envy 5540, connected wireless printer. It fails to print more than one copy at a time. I see nothing in the software or instructions to change it. Help please!

  It is not clear, put you number of copies in the boxes of Copies and pages?

  Can try this...

  Startup HD, (operation key shift key down to start), run the disk utility in Applications > utilities, then highlight your reader, click on repair permissions.

  All devices which appeared already in your list of printers and faxes list should be added again after resetting the printing system.

  Reset the printing in Mac OS X 10.5.x system +++

  1. To use the reset function of printing under Mac OS System X 10.5.x, follow these steps:
  2. Choose System Preferences from the Apple menu.
  3. On the view menu, choose Printers and faxes .
  4. Control-click on the printer list on the left side of the window, then choose "Reset printing system" from the context menu. If you don't see the list of printers, Ctrl-click on the text "click on + to add a printer or fax" and select "reset printing system...". »
     
     As an alternative, if you have one or more printers from the list, you can click the "-" (deletion of printer).

  http://support.Apple.com/kb/ht1341

  Reset.

• ENVY 15: HP Support Solutions Framework Service - high CPU usage

  ENVY 15, 10 Windows version 1607

  CPU cycles was about 50% this morning and discovered that the HP Support Solutions Framework service was 40 + % permanently.   No problems so far with high utility usage.  Problem started not with the update of the birthday that was filled with 4 days and there are several reboots.

  At a chat session with HP support, but they couldn't help.

  I stopped running - task seems to restart every time I run the HP support assistant and continues with + 40% of CPU usage.

  Any suggestions please?   Y at - it an update utility that I have to download?

  Uninstall HP Support Assistant HP Support Framework in Control Panel > programs and features

  Then, reinstall the latest version of this link

  http://h18021.www1.HP.com/helpandsupport/HP-self-support.html

• HP ENVY m6-ar000 x 360: HP Envy m6-ar000 x 360 Convertible PC Wireless Connection Disconnects frequently

  Hey everybody,

  My PC Convertible HP ENVY m6-ar000 x 360 Wireless disconnects frequently.

  What can I do to fix this?

  Thank you

  Bill

  Hey Bill,.

  Following our normal wireless troubleshooting tool is the best way to solve almost all of the cases, but with this specific model with the AMD processor jump directly to make sure that update BIOS F.06 or most recent would be necessary.

  HP ENVY Ar000 M6 X 360 PC Convertible - WiFi disconnects frequently

  http://support.HP.com/lt-en/document/c05144863

• HP Envy 4500: HP Envy 4500 reset admin password

  I just bought a new HP Envy 4500 and impossible to access many functions through the online web interface IP address. It keeps to a secure https version and then pops up to ask for a name and a password.

  I tried using admin / admin and a lot of variation with no luck.

  Any suggestions or help on this?

  Thank you.

  Rainbow7000 nailed you. I'm in place and operate properly. Thank you for your quick response to my question.

  See you soon,.

• HP ENVY 7640: failed to update for windows 10

  I had this error on update, I have windows 10

  • Error of Hewlett-Packard - Company WSD multifunction printer, MFP, HP ENVY 7640 of material other series - Null Print - 0 x 80070103

  • Update driver HP for Fax - series HP ENVY 7640 - error 0 x 80070490

  Hi, Hello!

  Thanks for sharing this request in this forum.

  Please, try the following steps and hope this helps!

  1. Go to settings-> devices-> devices
  2. Click the Device Manager link at the bottom of the screen.
  3. Open "printers".
  4. Then uninstall/remove the "unknown device" if present.
  5. Restart Windows 10 update.

  Thank you and best regards,
  meg0316
  
  I work in HP, but I am personally.

• HP Envy 5640: Missing emails 'subject '.

  When I send an email from a Google account to the printer using the address @hpeprint.com, the body of the text of the email is printed, but the "subject" is not printed.

  Can you please help.

  Hello

  It is exepcted, the ePrint print mail attahed content or supported only the files, not the subject of the e-mail:

  Type a subject in the subject line. An empty e-mail subject line can cause the HP ePrint Server cancel the print job.
  
  E-mail subject lines do not print.

  http://support.HP.com/us-en/product/HP-envy-5600-e-all-in-one-printer-series/6583033/model/6583034/document/c03721293/

  Kind regards

  Shlomi

• 4524 ENVY: Envy 4524 habit of scanning

  Hello

  I recently changed my ISP and they gave me a new router. I set the router upward and printers on wifi and everything works fine, except for scanning.

  The scanner works very well using a generic scanner software but is not a very user-friendly software. So I want to use the HP scanning software.

  When I open the HP Easy Scan it opens fine and the scanner is listed and presets are photo, graphics etc, but when I press 'analysis' it comes back with an error message 'Scanner reported an error' HP ENVY 4520 is currently unavailable. Please check if it is turned on and... »

  Any ideas please?

  Thank you very much

  Hello
  From the Applications folder or its subfolder HP, delete all existing scanning from HP and HP Easy Scan by moving it to the trash, and then empty the trash.
  
  Then install the latest HP Easy Scan below, it will be installed in the Applications folder:
  http://FTP.HP.com/pub/softlib/software12/HP_Quick_Start/OSX/installations/Essentials/HP-easy-scan-1_7_0.pkg
  
  If you experience additional problems, ensure that the latest version of the software is installed by following HP Easy Start below:
  http://FTP.HP.com/pub/softlib/software12/HP_Quick_Start/OSX/applications/HP_Easy_Start.app.zip
  
  Finally, make sure that your drivers are up-to-date by clicking the Apple icon, select about this Mac and then press on software update.
  Click on the Bank on the menu bar, click Reload Page, click all update if an update is available.

  Finally, if the problem persists, try restarting your router by unplugging its power for a while, it allows up to 3 minutes to start.

  Once the internet connection returns, restart the Mac and the printer and look for difference ay.

  Kind regards
  Shlomi