HP ENVY 17 Leap Motion SE NB P: why HP claims that HP ENVY 17 Leap Motion SE NB PC has USB 3.0 Ports?

Similar Questions

• HP ENVY 15-j027tx laptop: HP ENVY 15-j027tx laptop has USB 3.0 ports?

  Hello

  Please can anyone tell whether or not this particular model has 3 USB ports? or some USB 3.0 ports?

  HP ENVY 15-j027tx laptop

  Thank you

  Hello:

  The guide of the user for the model indicates that on the left side of the laptop there is a port of loading USB3 and a port USB3.

  See Chapter 2, page 5.

  http://h10032.www1.HP.com/CTG/manual/c03735710

• Desktop 700xt HP Envy with intel i7 - processor image 4770 has a DVI connector port

  I bought a HP Envy with Intel i7 - processor image 4770 700xt and Windows 8.1.  I would like to know if this computer has a DVI connection charging port.

  Assuming that your 700xt want model has a back panel that looks like the one below, it has a VGA output (analogue only) and a DVI - D output (digital only);

  

  #4-VGA (analog only) 5 - DVI - D (digital only)

• HP Envy 14-1010nr: HP Envy 14-1010nr Notebook PC: replace and upgrade to USB 3.0 ports

  Hello
  
  I have a HP Envy 14 - 1010nr Notebook PC, which had two USB 2.0 ports on the left side and a USB 3.0 port on the right.
  
  USB 3.0 port was damaged such as connectors plugged it seem a little loose and can move laterally a little so that the connection to the device comes in and out - makes it uncertain to copy some stuff on a hard drive through it, for example.
  
  Is it possible for me to replace this port? Where could find a spare part for that if it can replace?
  
  Even though I am inside the computer, I might as well replace the USB 2.0 with USB 3.0 ports ports if the pats replacement for that exist...

  You're right, because there is no audio + USB 3.0, only the original + USB 2.0

• Envy 15 freeze on the transfer of data USB 3.0 drive when copying many files

  Thanks in advance.

  My brand new envy 15 (model LW897AV) (15 t-3000 CTO) crashes every time that I try to transfer a lot of files from a Flash DRIVE via the USB ports on the laptop.

  It gets about 5 minutes, then simply hangs. He had done this 7 times now. I got a message on a blue screen BSOD once:

  0xE0010002

  After calling technical support HP and Google search, they think it's a problem with the USB 3.0 controller or something to do with the hibernation mode. I updated the driver for USB 3.0 controller. No joy. Also, I changed the power settings to never Hibernate. Still no solution.

  The USB ports on the left side appear to be able to let go. Next to the USB port is a wireless mouse, and he loses too much power (the Green led turns off). Sometimes the mouse keyboard and the touchpad still works. Other times, everything is frozen.

  I can recreate the problem with two different USB drives. Of course, these USB drives have no problem with either of the readers.

  Help!

  Thank you. -ChipTay

  Hi kstoltz. I have the solution for you.

  Return it. I spent more than 20 hours, sending in the dump and bsod messages files. SUPPORT TECHNIQUE IN THE U.S. WAS AWESOME.

  FAR IS A SUPPORT TECHNIQUE WAS SO PAINFUL THAT I THREW ALMOST THE ENVY 15 IN THE MARINA.

  They said it was a problem with the hardware with USB 3.0 ports and file transfers. There was no trouble, so they have defective only intel chips on motherboards out there.

  I had an Exchange with an upgrade of RAM and processor for my troubles.

  :-)

  I love HP.

• HP DV7 ENVY: USB 2.0 Port does not

  Hello

  I have a DV7 HP ENVY with 3 - USB 3.0 ports and 1 - USB 2.0 port. The USB 3.0 ports are working well but USB 2.0 does not work. When you plug a USB stick to the USB 2.0 port power led on the memory stick lights up but the led data is not. The computer does not at all to the inserted USB memory. The USB works fine in other 3.0 ports. I tried also to connect other USB devices, and it's the same thing. They work well on USB 3.0 ports, but nothing happens when you connect to a USB 2.0 port.

  I was looking at the USB drivers in Device Manager and haven't noticed anything that seems strange.

  I have run the system test diagnostic USB to start the system and got the following codes:

  Failure ID: 9BXQGK-6JK858-QFPK0K-8D0G03

  Product ID: C1W26EA #UUW

  No idea if this is a hardware or software failure?

  Hi @pefre,

  Welcome to the HP Forums! I read your post and wanted to help.

  I understand that the USB 2.0 port has failed on your laptop. According to the fault code 9BXQGK-6JK858-QFPK0K-8D0G03 you officer, I got following results:

  ID Tag9BXQGK-6JK858-QFPK0K-8D0G03 failure

  ChecksumOK

  16/06/Date2016 of test

  Failure Code434

  Device

  Communications

  Includes

  GPS, HUB, Modem, network, map network drive, PCI, PCMCIA, Switch, USB card

  Error message

  Failure of USB (not specified)

  It seems that there is a hardware failure with the USB port.

  Is your laptop still under warranty? If so, please contact support phone HP load a repair:

  Please the following link http://www.hp.com/contacthp allows you to create a folder for your problem and contact HP. If you do not live in the United States / Canada, please click on the link http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html to get contact information for your region.

  Please let me know if that solves the problem by marking this message as "accept as a Solution.  To simply say thank you, click the thumb upward below!   If you need more assistance let me know and I will gladly do everything I can to help. Thank you.

  Kind regards

• Envy 17-j141na: a USB 3.0 port only works on USB 2.0

  Hello

  I have a HP Envy 17-j141na (product number: J0C16EA #ABU) running Windows 8.1.  I recently tried to connect a Sata hard drive via a USB 3.0 enclosure and found that the right rear USB port works with a USB 2.0 cable and any USB 3.0.  There is no problem with any of the three other no ports just this one.  Grateful for any help.

  Thank you.

  Hello Malygris1,

  Thank you for your help and suggestions.  I investigated further and found that the problem had become a problem on the port adjacent to the original track and then there are two with the same problem.  I was struggling to believe I had lost a second port and so took risks on the purchase of an another leader of a different even if manufacturer initial lead was again with the Cabinet.  The result was successful with all USB 3.0 ports.  I can only assume that there was a faulty connection in original mind that failed when it was routed to one side of the laptop and not the other.  Thanks again, I'm certainly glad that the fault was not in the computer.

• 15K067NZ HP Envy: taken 3 USB of my laptop HP Envy 15K067NZ / HP Laserjet P1005 Printer requires 2 USB

  HP Envy 15K067NZ: USB 3 outputs /HP Laserjet P1005 Printer

  Of the printer Troubleshooter said: he needs connectivity USB 2

  An external USB 2 exists which can b connected to the USB port?

  USB is a compatible specification. This means that a usb 3.0 device works on a usb 2.0 and 1.1 and 1.1 usb port.

  A usb 2.0 device will work when plugged into a usb 3.0 port, but there just not the ability of band bandwidth usb 3.0.

• Envy 15-u000na: no network driver, no working USB flash, no CD/DVD drive after downgrading of 10 for Win7 Pro 64

  Please can you help me - I turned my cell phone Envy in to an expensive paper weight, after (below) the upgrade of Windows 8.1 at 10 - I hated it and decided that I must return to 7Pro as I want to join the domain and want to install VMware etc.

  I made the plunge and left me without back that all the important factors are missing, including USB, NETWORK interface integrated hubs & wireless - the machine has no DVD player and it won't recognize not flash or SD - ports USB card readers but work for dongle wireless keyboard and mouse.

  Not too sure where to go now - any ideas?

  Model 15-u000na

  P/N J1W92EA #ABU

  Hello:

  There are other drivers you need...

  Wireless:

  This package contains the installation package driver for wireless LAN Qualcomm Atheros AR9000 controller series in the laptop models running a supported operating system.

  FTP://ftp.HP.com/pub/SoftPaq/sp70501-71000/sp70859.exe

  You will need this bluetooth driver for this model of the wlan card.

  FTP://ftp.HP.com/pub/SoftPaq/sp69001-69500/sp69230.exe

  PCI device: 1 driver on the list from the link below.

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1 & PNid = 15 & PFid = 25 & Level = 4 & Conn = 3 & DownTypeID = 3 & getdown = false

  Series 8 Intel xHCI HC - 31 9: download, unzip and run the setup.exe file.

  https://Downloadcenter.Intel.com/download/22824/USB-3-0-driver-Intel-USB-3-0-Extensible-host-controller-driver-for-Intel-8-9-100-series-and-C220-C610-chipset-family

  PCI Simple Communications controller:

  This package provides the driver Intel Management Engine Interface (MEI) for the notebook models and operating systems. The Intel Management Engine Interface allows communication between the host operating system and the Intel Management Engine firmware.

  File name: sp71258.exe

  ACPI\HPQ6007:

  This package provides the HP 3D DriveGuard software (HP ProtectSmart Hard Drive Protection) for the laptop models running a supported operating system. HP 3D DriveGuard software protects the drive hard by parking the heads if cell phone accidentally falls, or is suddenly struck by another object.

  File name: sp71811.exe

  ACPI\INT33A0:

  This package provides the driver for Intel Smart Connect technology for the laptop models running a supported operating system. The driver for Intel Smart Connect technology allows the system to exit the sleep mode and web update supported applications such as electronic mail. The system enters sleep once the update is complete.

  File name: sp68943.exe

  ACPI\ACPI000E: The device missing the driver's ACPI wake up alarm.

  After several attempts to scouring the internet, I found the file that I attached below.

  This is the ID of the material shown in the file of configuration information...

  [Manufacturer]
  STD % = AcpiTime, NTamd64

  [AcpiTime.NTamd64]
  % * ACPI000E. DeviceDesc % = AcpiTime_Inst, * ACPI000E

  Download and uncompress the file in its folder.  Do nothing with the 2 files in the folder.

  They must be installed manually as follows...

  Go to Device Manager and click on the (unknown) device of ACPI\ACPI000E who need the pilot.

  Click the driver tab.  Click on set to update driver.

  Select her browse my computer for driver software option and navigate to the driver folder, that you unzipped.

  Make sure that the include subfolders is selected, and I hope that the driver will be installed.

  Then restart.

• the envy 15 - k112nl: help! Igfxtray module has stopped working

  My operating system is Windows 8.1
  From the first, just start the operating system, this message appears.
  I already did all the updates but doesn't change anything.
  The strange thing is not always the case...
  I also tried to format and restore the system to the original (even if the error was there from the beginning).
  Here are the details:

  Firma problema:
  Problem event name: APPCRASH
  Application name: igfxTray.exe
  Application version: 6.15.10.3574
  Application timestamp: 535821b 3
  Nome modulo con if: combase.dll
  Versione modulo con if: 6.3.9600.17031
  Timestamp modulo con if: 53087867
  Exception code: c0000005
  Offset exception: 0000000000005fc 4
  SO version: 6.3.9600.2.0.0.768.101
  Locali impostazioni ID: 1040
  Additional information 1: 6e7b
  Further information 2: 6e7b5f57cd6ed15f3431cd3d49dfc83a
  Further information 3: 85e1
  More information 4: 85e1489b50a3f82602beac997d76aebd

  Bought my HP Envy in January 2015 and received this error message at start-up. Read all the suggestions here, but was afraid to try to remove the drivers on my own. Instead, I used the HP support chat service. HP technician took the screen control (with my permission) and does all the work while I watched. It was a rather technical and complex challenge that took about 15 minutes, including two reboots. When the computer restarts, the technology was already ready to continue once completed starting. He has solved the problem, waited patiently for a start more to make sure that the error message disappeared and then proposed to call me 1 hour to see if everything was still OK. Cannot recommend this service enough.  Surpisingly good service of HP. It's my first HP because I always heard bad things about their service, but their obviouly working on fixing it. Not sure if this service is available only if your computer is not in the warranty. Maybe for a fee, but still worth it.

• HP ENVY x 360-15-w056ca: my laptop has Nvidia?

  I was going through Control Panel when I saw the Nvidia Control Panel in there do you mean I have Nvidia in my laptop? I have recenly bought it shows the Intel Hd graphics card also (my product name is HP ENVY x 360-15-w056ca)

  Hello

  As noted above, it can go up to nearly 4 GB function available system RAM. System will this work for you, and the number can vary from 128 MB to the top. In your case, 1 GB is good, your computer has 1 GB of RAM spare system.

  Concerning

• HP ENVY 750z desktop PC: transfer Hp Recovery on USB

  I have just recieced my computer of 750z HP ENVY. I see that the computer recovery partition is a drive D: with 2.18 Go Go 17.5. I would like to come back to this space. Is it possible that transfer to a USB key? Would be all I need is one that can contain the 2.18 GB or GB 17.5 all? How would then delete the partition (disk?) for this space to hard drive?  Also if someone could also provide information on what I need to do to use a USB to recover in case I ever do must recover. I've never had to do anything like that.

  Hello

  Yes, but we don't call it 'transfer' we call creating recovery media. Use the following instructions (page #15).

  http://h10032.www1.HP.com/CTG/manual/c04843029

  After that, keep the USB key in a safe place (you may need a day) and you can delete the recovery partition.

  Note: You can only create once.

  Kind regards.

• HP Envy 15-K204NA: upgrade to Windows 10 has failed with error 80070714. Help, please!

  Hello.

  I hope there, can someone help me!

  I tried several times to improve my HP Envy 15-K204NA for 64-bit Windows of 8.1 to 10 Windows Home, but she continues to fail with the error code 80070714.

  I use Protection Premium Bullguard and Acronis True Image installed.

  I disabled the SQL services as suggested by other posts on the internet, but nothing seems to work.

  When I run the upgrade from a DVD burned ISO, it gets 37% and fails.

  Hope you can help. (fingers crossed!)

  Chris

  The Setup error log file shows:

  2015-08-05 16:48:34, error CallPidGenX: PidGenX function failed on this product key. (hr = 0x8a010001)
  2015-08-05 16:48:37, error CallPidGenX: PidGenX function failed on this product key. (hr = 0x8a010001)
  2015-08-05 16:48:49, error CONX failed to initialize the data of net class 80070005

  2015-08-05 16:48:50, CONX error could not get data from the printer class 80070057

  2015-08-05 16:49:21, CONX error could not open the INF [tib_mounter.x64.inf] with 0 x 80070002

  2015-08-05 16:49:21, CONX error cannot initialize the driver package [tib_mounter.x64.inf]

  2015-08-05 16:49:21, CONX error could not open the INF [oem46.inf] with 0 x 80070002

  2015-08-05 16:49:21, CONX error cannot initialize the driver package [oem46.inf]

  2015-08-05 16:49:23, CONX error could not open the INF [tib_mounter.x64.inf] with 0 x 80070002

  2015-08-05 16:49:23, CONX error cannot initialize the driver package [tib_mounter.x64.inf]

  2015-08-05 16:49:23, CONX error could not open the INF [oem46.inf] with 0 x 80070002

  2015-08-05 16:49:23, CONX error cannot initialize the driver package [oem46.inf]

  2015-08-05 17:06:14, error MS RegLoadKeyW failed to mount C:\$WINDOWS.~BT\Sources\SafeOS\SafeOS.Mount\WINDOWS\system32\config\SYSTEM to SP_HIVE_LOAD_ALIAS_SYSTEM [gle = 0x801f0005]
  2015-08-05 17:06:14, SP SPMountOfflineHive error: cannot mount the hive offline: C:\$WINDOWS.~BT\Sources\SafeOS\SafeOS.Mount\WINDOWS\system32\config\SYSTEM. Error: 0x801F0005 [gle = 0x801f0005]
  2015-08-05 17:06:14, SP CEnableTelemetryForImage error:oExecute: cannot load the hive of the system for the C:\$WINDOWS.~BT\Sources\SafeOS\SafeOS.Mount\WINDOWS OS offline. Error: 0x801F0005 [gle = 0x801f0005]
  2015-08-05 17:06:14, error [SetupHost.exe] ReAgentXMLParser:arseConfigFile (xml file: C:\$WINDOWS.~BT\Sources\SafeOS\ReAgent.xml) return 0 x 2
  2015-08-05 17:06:19, error MS by using the current time as a Timestamp of recovery.
  2015-08-05 17:06:22, error MS cannot open session DISM WinPE. Error: 0 x 80070714 [gle = 0x0000007a]
  2015-08-05 17:06:22, MS operation failed error: drivers of Migration process. Error: 0 x 80070714 [gle = 0x000000b7]
  2015-08-05 17:06:22, MOUPG MoSetupPlatform error: ExecuteCurrentOperations reported failure!
  2015-08-05 17:06:22, MOUPG MoSetupPlatform error: using the action error code: [0 x 80070714]
  2015-08-05 17:06:22, CDlpActionDriverMigrate::ExecuteRoutine (544) MOUPG error: result = 0 x 80070714
  2015-08-05 17:06:24, error MOUPG CDlpActionImpl < < < < class IMoSetupDlpAction > CUnknownImpl > CDlpObjectInternalImpl > CDlpErrorImpl > class class class: Execute (441): result = 0 x 80070714
  2015-08-05 17:06:24, CDlpTask::ExecuteAction (3243) MOUPG error: result = 0 x 80070714
  2015-08-05 17:06:24, CDlpTask::ExecuteActions (3397) MOUPG error: result = 0 x 80070714
  2015-08-05 17:06:24, CDlpTask::Execute (1631) MOUPG error: result = 0 x 80070714
  2015-08-05 17:06:24, CSetupManager::ExecuteTask (1953) MOUPG error: result = 0 x 80070714
  2015-08-05 17:06:24, CSetupManager::ExecuteTask (1916) MOUPG error: result = 0 x 80070714
  2015-08-05 17:06:24, CSetupManager::ExecuteInstallMode (736) error MOUPG: result = 0 x 80070714
  2015-08-05 17:06:24, CSetupManager::ExecuteDownlevelMode (376) MOUPG error: result = 0 x 80070714
  2015-08-05 17:07:09, error MOUPG CSetupManager::Execute (222): result = 0 x 80070714
  2015-08-05 17:07:09, error MOUPG CSetupHost::Execute (370): result = 0 x 80070714
  2015-08-05 17:07:12, CDlpManager::AsyncSerializeDisable (471) MOUPG error: result = 0 x 80070216

  I have now abandoned and rebuilt my laptop using the recovery partition.  The upgrade to Windows 10 came immediately, and it installed fine.

  Hooray

• HP Envy M4 - does not recognize the Ethernet or USB controller

  I recently got a new HP Envy M4 and installed Windows 7 above.  I tried to install all the drivers on the support page HP, as well as any Intel acknowledged and stated that I needed, but the system is still not recognize Ethernet controller and the USB controller.  I have no idea where else to find appropriate drivers for these devices to make the system to identify and to work correctly.

  Why aren't these drivers on HP website?

  Hello

  Try a few steps

  go to your device manager > right clock on ethernet controller > go to properties > then details tag

  Select from the drop-down called Hardware ID is.

  and search for it on google or any search engine, you will get the right drivers...

  Here's print process filming!

  I hope this helps!

  

• laptop Envy 17 17-j034ca: can not detect the usb flash drives

  Hi, I recently installed windows 7 64 bit on my computer laptop envy 17 17-j034ca. Then, I managed to install all the drivers but it still doesn't detect usb flash drives and I tried to install from the web site of HP and my config but it still does not work

  Please help me

  

  It's ok my sound suddenly computer detects the flash drives normally