HP ENVY 23-d104er: slot MINI_CARD2 on the IPISB-NK (Lavaca3-SB)

Similar Questions

• 23 envy d027c All In One with the card mother Lavaca3-SB IPISB - NK. How to upgrade the video card?

  I have a HP Envy 23 d027c All In One with the card mother Lavaca3-SB (pegatron) IPISB-NK.  It has a PCI slot available for upgrade of the video.  I want to do this.  I intend to use the pc for video processing and maybe a few games.

  How to pass the video?

  What cards are best for this system?

  What has changed in the BIOS or other settings I should do?  How can I get them?

  Thank you

  Art

  The PCIe MXM slot is for HP install graphics cards in some models CTO (configure-to-order). Without the card installed when you purchased the computer, there the fan and radiator bad sets. You will need to buy a graphics card and the heatsink / fan of HP to try to upgrade the GPU in your computer. There is an extensive disassembly involved in this procedure. All-in-One computers have much more in common with laptops than they do with traditional desktop computers.

  Honestly, if you want to do video processing and games... you should get a traditional desktop with enough CPU and GPU for these activities.

  Please click the White Star of KUDOS to show your appreciation

• Nine (3 days out of the Box) HP Envy 700-230qe automatically restarts after the initial boot...

  I have now a whole new desktop 700-230qe HP Envy (after about a month in the loop of the HP Technical Support).  But again, I have problems.  I took late delivery December 23, 2013.  After giving him enough time to become the temperature of the room, I opened the box and replaced my old HP Pavilion h8 - 1210t with envy again desktop computer.

  Took my time and made sure that everything is properly connected - then pushed the power button.  Everything seemed to work perfectly - until what the brand 20 minutes - when the system powered off and rebooted itself.  But for the rest of the session, everything went well - no problem.  It was Monday night.

  On Tuesday morning (December 24, 2013 - on Christmas Eve), I pushed the power button once again and the system started fine.  But 20 minutes later, it turned off and rebooted itself.  But for the rest of the day everything went well - even if I had to make several reboots all reinstall my applications and migrate my data.  I started to wonder if I still had problems.

  Christmas day (December 25, 2013) is the same thing.

  And once again on Thursday (December 26, 2013) - I finally called HP Technical Support.  I spoke with a gentleman (Terrence) - he accessed remotely my system which makes me nervous (but these guys of Nova Scotia are very good and are savvy customers.  He looked around - ran MalWareBytes and CCleaner - and said that he saw nothing thaat would be a problem.  We agreed to wait a day and see what would happen.

  Rolled Friday autour and you'd know it's the same thing.  Then, I called HP Tech Support and spoke to a lady (Norma) who, after having read the file of description of situation and asking me my name, phone number, email address (which they ask you every time you call - you would think they write this stuff and keep it on file), she immediately decided that the best thing to do is to 'Recreate the IMAGE' on my drive - to which I replied 'NO WAY '.  This seems to be the standard response, if they can't fgure out - recreate the image on your disk.  They don't seem to care about all the work you put into the construction of our system with applications with associated and all data - they want to just Blow-It-Away.

  It made me so angry that I have immeddiately contacted my case manager company HP with the history.  These people - business - case do an excellent job, at least the one I did a great job.  And I know she'll get to the bottom of this situation and go to a happy camper.

  Anyway, if anyone has the same problems with their machine - I'd be interested.

  Kind regards

  Garth

  <>>>>

  I did not read all the answers, but what my qestion... Why are you screwing around? HP has a 21-day return policy, so you can ask them to replace it with the same model or another model as they will send you a FEdEx shipping for a full refund or Exchange label. I wouldn't waste my time with a question like this on a new computer.

• HP Envy 15 k046nd: Envy 15 k046nd how to remove the keyboard (shift of collage and key)

  Hi all

  Short version:

  Does anyone know how to remove a single key on the keyboard without breaking? (or if it is still possible) I tried some things, but have failed.

  Long version:

  Unfortunately, I spilled lemonade on my keyboard last week. I cleaned it all that quickly, and nothing is technically wrong. But after 2 days some keys on my keyboard started to stick very bad, especially the entrance and the shift key. They still work, but it's very annoying. I have tried lifting below them and cleaning, but that has not worked, and I also can't get down them. I looked for a way to replace the keyboard, but I have to essentially take the computer laptop all apart + it's expensive. I hope someone can tell me how to down the different keys without breaking!

  Thank you

  Leon

  Hi there @leonsmits,

  Welcome to the HP support community! I read your post and wanted to tender hand can help you! I read that you want to remove the keys of the keyboard because they hold and you want to clean.

  If a key is physically stuck in the down position, you should not replace your laptop. Many keyboards have keys that can be removed by inserting a knife to butter under one edge of the button and gently lifting upward on the upper and lower edge. Please NOTE: To avoid damaging the cushion under the key, insert the knife to butter only 1/8 of an inch under the edge of the key

  After having removed the key, using a buffer with alcohol, clean the underside of the key and the key on the keyboard slot. Put the key in the snapping it back in place.

  Here is a document for you called portable keyboard troubleshooting. There is a section in this document, called a laptop key stuck. This section will help you to guide you how to clean these keys.

  If the keyboard doesn't have keys that can be removed, you may need to replace the keyboard or laptop service.

  This answer doesn't solve your problem or answer your question? If so, please share the good news! Inform others that this answer was helpful by clicking on the button accept as a Solution . You can also show your appreciation by clicking thumbs-up.

  If you need assistance, I would be more than happy to continue to help you. Please re-post with the results of the resolution of the problems.

  Thank you!

  Have a great day!

• which slot to put the Samsung SM951 ssd in

  I have a Mac Pro 2009 and just bought an adapter Samsung SM951 SSD and m2.

  http://www.Amazon.com/GP/product/B00VELDBJ6?PSC=1&redirect=true&ref_=oh_aui_deta ilpage_o00_s00

  http://www.Amazon.com/GP/product/B00MYCQP38?PSC=1&redirect=true&ref_=oh_aui_deta ilpage_o01_s00

  In order to obtain maximum possible performance, I wonder what pci slot to put it in. I read somewhere that slot 2 is the best, and then I think I've read on barefeats that slot 3 was better, but that might have been a RAID. I want to install only a single disk and want to choose the optimal location.

  It should not make a difference because all the slots in a 2009-2012 are Gen 2. Units 1 and 2 are 16 channels and 3 and 4 are only 4 channels but the PCle card is only four lanes.

• HP Envy 4500: HP Envy 4500 - photo print half off the page. Print very well.

  All of a sudden, my HP Envy 4500 failed to print all the images; documents continue to print OK.  For photos, the printer acts like it's works fine to start, but print only about half of the photo on the paper - it seeks to print the rest on the back of the photo a lot of ink rollers...

  Research forums, this is the EXACT problem I have:

  http://h30434.www3.HP.com/T5/inkjet-printing/HP-envy-4500-prints-only-half-of-the-photo/TD-p/3781222

  I have uninstalled/reinstalled drivers, try to print from a different computer, laptop and even tried what was suggested in the post above - to copy a picture of the scanner on the printer itself.  Who printed still only half of the picture...

  The consensus from the link above was a hardware problem.  My printer is no longer under warranty, so unless there is another thing I can try I will buy a new printer.   This one isn't worth it for me to pay to ship somewhere to remedy.

  Any last suggestions until I have this gift to local traffic (with a note that it only prints documents)?

  Hi @JPotter,

  You can contact HP customer care to find out what service or the recovery options are available. Check the model number and the form to receive a file number for faster assistance.

  Thank you!

• expansion slots available in the hpe 1160d h8 h9 pcie, pci how?

  expansion slots available in the hpe 1160d h8 h9 pcie, pci how?

  Hello

  Here it is:

  http://support.HP.com/us-en/document/c03014589#n66

  Kind regards.

• The HP Envy 17 laptop Quad t allows the base to extend HP xb3000 (docking station)?

  I got a HP Pavilion dv9000 for about 7 years and use it at home with the HP xb3000 expansion base that has USB connections as well as the Altec Lansing speakers like the laptop.  A connector on the base of extension plugs into the connector on the expansion of the Port 3 on the Pavilion dv9000 and it has always worked very well. It allows additional hard disks must be installed in the base of the expansion, but I have not used this option.

  I recently bought a HP Envy 17 quad t laptop with Beats Audio speakers.  It doesn't have a connector of the expansion Port 3, so I was wondering if there is any type of connector/adapter allowing the HP xb3000 expansion base be connected to and used with the HP Envy 17 T.  Any suggestion would be appreciated.  Thank you and have a great day!

  Hello

  Envy has no expansion port so the base is useless in your case. A few other products that use the USB port would be useful.

  Kind regards

  PS a compatible list updated January 21, 2014:

  http://en.Wikipedia.org/wiki/HP_xb3000

• How to choose the slot one of the two bunk?

  How to choose the slot one of the two bunk?

  Select the two points to cross the selection with the open selection tool, and then clear the high point on the page by holding shift and clicking on it.

  or vice versa. Select the high point of the page first and then select now shift. the high point of the page désélectionnera.

• ENVY DV7 7243nr: how to identify the slots of ram for my hp Envy DVD 7243nr

  I bought a 4 GB memory module to replace the 2 GB one in my laptop, I can't identify what the 2 GB one.

  The other location contains a module of memory 4GB so this will improve my laptop it's RAM max.

  Hello

  The label of each original memory has a part number, pudes looking for you:

  http://PartSurfer.HP.com/search.aspx

  Although without this label, you can leave only one of the original modules, see the system information in the Control Panel, or run a program that shows you:

  Crucial.com - Crucial System Scanner

  Concerning

• ENVY Phoenix Desktop - 850-065: Add the port ethernet on the desktop

  I want to add a second ethernet port on the desktop... any recommendations, the Gathas, the various factors to consider... I seem to have three ports of extension on the PCI bus... one of them would be the target (or what)... any recommendations on ethernet brand and model to consider...

  Any wisdom on the subject will be sincerely appreciated...

  Hello

  There are many models/products of ENVY Phoenix Desktop - 850-065 series. In any case, according to your description you can use a normal PCIe 1Gig card. There are a lot of cards around, 1 port, 2 ports or more. Please make sure that there are drivers CD or at least it shows you where to find driver (from the site of the manufacturer).

  Kind regards.

• HP Envy 750-150: I can upgrade the GPU?

  Hey. I was wondering if it would be possible to upgrade my GPU a Nvidia Geforce GTX 960 980 on the HP Envy, as im currently saving up for a GTX 980 and im wondering if I should. Any answer would be useful.

  The differences areillustrated here.  Secure boot must be disabled, as will detect a different material. The GTX960 probably comes with the PSU 500W PSU, so you OK because it shows a configuration with the GTX980Ti file.

• Laptop HP Envy M6: problem with hinges on the m6 HP Envy laptop

  I bought the laptop M6 Envy in 2014 for my daughter and it is now coming apart at the hinges of the normal level

  wear and back, she of afraid that if she continues to open & close it may collapse, but to use for school, please advise if there is a recall on this product or how can I fix it.

  @Alexenvy

  I brought your question to the attention of a team within HP. They are likely to ask for information from you to get your information or product serial number. Please search for a private message from a contact HP identified. Also, remember not to publicly display personal information (serial numbers and information).
  
  
  
  If you are unfamiliar with the operation of the function of the Forum, private messages you can learn it all here.
  
  
  
  Thank you for visiting the Forum from HP Support.

• HP Envy 4512 all-in-one: is the HP Envy 4512 all in an e print an ink or laser jet?

  I never gave much thougt before but am now need to set up my printer for greeting cards and they want to know if it is ink or laser - I can't find this information in any of the documents I received.   Is someone can you please help me identify this product - inkjet or laser printing type?

  Thank you!

  Rita O

  User/technically limited product!

  The HP Envy 4512, as well as all of the printers, Deskjet, Officejet and Photosmart, Envy are all ink jet printers.

• HP Envy 750-124: cannot get into the Bios of the normal on the envy of 750-124

  I speak not normal Bios and UEFI. I've recently updated to Win 10 anniversary

  Given my http://support.hp.com/my-en/drivers/selfservice/hp-envy-750-100-desktop-pc-series/8499646/model/8819... Bios Update

  who was A0.16 Rev.A.

  Installed and it reset my settings. I need to come back here to turn back on my virtual technology. Otherwise, I can create only 32-bit VM VirtualBox

  https://h30434.www3.HP.com/T5/desktop-operating-systems-and-recovery/how-to-access-BIOS-to-enable-th...

  Cannot return to normal Bios. I tried Tap the ESC which worked before, screen freezes and I hit enter and the HP logo comes up, tried to hit and also hit F10. As much as I turn power. I have a wireless Logitech K800 keyboard that worked before. I tried a usb keyboard standard ensuring they were on a USB 2.0 port. F2 to display a cold start UEFI bios.

  Them win 10 things don't me settings there, recovery, advanced. Tried all

  I was hoping that HP had fixed the enter the Bios thing with updated Bios if installed. This thing was a pain like that otherwise I'd be a camper happy with this PC, how is it you can not solve this HP?

  Because of disconnect hard drive it hangs just below ground

  The solution is

  I had installed a better Nvidia GTX-950 video card. By hitting the ESC, it hangs and nothing happens. Black screen, although you can see slightly change the colors

  Fortunately both the edge video card and the new Nvidia both using a HDMI cable. So I just plug my integrated video card. Started while typing ESC and the Legacy Bios screen selection came where I choose F10 to enter the Bios of the legacy

  When you perform an update of the HP Bios seems to put everything back by default, in other words on board, by selecting the video edge. Although you can see by selecting HDMI port at startup if you think it's ok.

  I have worked with Dell PC for 15 years to work, it does not matter what card I put in them. At the start, I hit F2 and Bios loads so that bit me. Now I know

  Hope this helps someone else.