HP Envy 27 ":" computer Will fire when left on 24/7?

Similar Questions

• How can I configure my computer to sleep when left inactive Aero

  My computer has just been repaired and it the technician has not set a time for the computer to sleep when idle for several minutes

  Hi Phill,

  What version of Windows is installed on the computer?

  You can check these items to create a power plan or choose one.

  If you have Windows Vista.

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-create-or-delete-a-power-plan-scheme

  http://Windows.Microsoft.com/en-us/Windows-Vista/power-plans-frequently-asked-questions

  If you have Windows 7.

  http://Windows.Microsoft.com/en-us/Windows7/change-create-or-delete-a-power-plan-scheme

  http://Windows.Microsoft.com/en-us/Windows7/power-plans-frequently-asked-questions

  I hope this helps.

• My computer will not be stopped by using the "turn off computer' under 'Start' (lower left corner)

  My computer will not be stopped by using the "turn off computer' under 'Start' (lower left corner)

  Hi Harry,.

  · What happens when you try to stop?

  · You receive an error message or error code?

  · Do you remember all the recent changes on the computer before the show?

  · What is the service pack installed?

  You can check the link below: Windows XP Shut Down and auto-restart issues: http://www.microsoft.com/windowsxp/using/helpandsupport/learnmore/russel_02may13.mspx

  Advanced Troubleshooting for shutdown problems in Windows XP: http://support.microsoft.com/kb/308029

• Reference Dell 2400 will start when the power cord connected to the mains, or after restoring power. Is the result of a setting on the computer?

  The computer is turned off.  If the electricity is off, the computer will automatically start once power is restored.

  I guess it's a desktop pc that is a few years old and yes some early atx power supplies will do it, creepy when there was an interruption of the power supply when you are out and go home to find the pc on.

• When starting my computer will not have right to windows is said by pressing F1 or F2, he also says to look for floppy drive 0 failure

  When starting my computer will not have right to windows is said by pressing F1 or F2, he also says to look for floppy drive 0 failure

  It is a message from the BIOS. You can press F2 and go into BIOS and select "set as default" then save and exit. The PC actually has a floppy drive?

• Generally when I go in windows or by mail, the computer will pick up, and then when it opens, I can't keep the page at a particular place

  Original title: blocking or scrolling

  Generally when I go in windows or by mail, the computer will pick up, and then when it opens, I can't keep the page at a particular place. It scrolls upwards or downwards, when I try to open a place to file an open letter from mail, or trying to do some work. Please notify.

  Hello

  1 how long have you been faced with this problem?
  2 don't you make changes on the computer before this problem?
  3 what e-mail client or browser you use?

  Step 1: Check if the problem persists in the clean boot state.

  From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".

  Reference:
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
  1. click on start and then click Run.
  2. type msconfig and click OK.

  The System Configuration Utility dialog box appears.

  3. click on the tab general, click Normal Startup - load all services and device drivers and then click OK.
  4. When prompted, click on restart to restart the computer.

  Step 2: Also, viruses or malware scan and check.
  http://www.Microsoft.com/security/scanner/en-us/default.aspx
  http://www.Microsoft.com/downloads/details.aspx?displaylang=en&FamilyID=ad724ae0-e72d-4f54-9ab3-75b8eb148356

  Step 3: Also, look for error messages in the event viewer. If you find error messages after return the exact error message so that we can help you better.

  Reference:
  Using the event viewer
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/snap_event_viewer.mspx?mfr=true
  Understanding of event viewer
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/event_overview_01.mspx?mfr=true
  Procedure to view and manage event logs in Event Viewer in Windows XP
  http://support.Microsoft.com/kb/308427

• My computer will not go into Hibernation mode. I checked the hibernation mode. But when I close the laptop, I get a message saying prepare to Hibernate.

  My computer will not go into Hibernation mode. I checked the hibernation mode. But when I close the laptop, I get a message saying prepare to Hibernate.

  Hello

  1 I want to erase the General corruption and repair/replace damaged/missing system files:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ============================================

  After the foregoing: a Fixit for Hibernate

  How can I enable hibernation on my Windows Vista computer?
  http://support.Microsoft.com/default.aspx/KB/929658

  How to reactivate the lack of Hibernate Option in Windows Vista?
  http://www.askvg.com/how-to-re-enable-missing-Hibernate-option-in-Windows-Vista/

  -------------------------------------------

  More if necessary:

  Check your settings (BIOS/CMOS) - usually F2 as you start - Wake on Lan, Wake on Modem and so on.

  Troubleshooting Windows Vista sleep and extended
  http://www.computerperformance.co.UK/Vista/vista_hibernate.htm

  How to troubleshoot performance problems with sleep, hibernation and resume in Windows Vista
  http://support.Microsoft.com/kb/950686

  May need to reset all to default power settings and then place back as you prefer.

  How to solve a problem of Mode for Vista and find a Solution
  http://www.Vistax64.com/tutorials/63567-power-options-sleep-mode-problems.html

  How to enable and disable Hibernation - you can try to disable and re-enable the it. http://www.Vistax64.com/tutorials/165508-hibernation-enable-disable.html

  How to restore the default power in Vista (and then go back and change as you wish)
  http://www.Vistax64.com/tutorials/198047-power-plan-restore-default-settings.html

  Panel configuration-Device Manager - look at the settings for the network card, WiFi, Modem power management.
  and other devices. (Double click on the device and the power management tab)

  Panel configuration-Control Panel Home view (non-conventional) in the top-right search pane
  type of hibernation - see turn Hibernate on / off

  May need to reset all to default power settings and then place back as you prefer.

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• my computer recently crashed and when I tried to use photoshop, then I got the message: - message - problem with display driver, temporarily disabled the improvements. Does that mean, they will return when the problem is solved?

  My computer recently crashed. A fixed it but! When I then tried to use photoshop I got the message: - message - problem with display driver, temporarily disabled the improvements. Does that mean, they will return when the problem is solved?

  Update or restore your graphics driver.

• Loss of internet connection after sleep and the computer will not be closed.

  I have a laptop GateWay w / Vista 32 bit OS.  Recently connected to the new internet connection and can connect without a problem.  However, after waking from sleep, the connection is lost, the icon indicates still active connection, can no longer open connection or the computer will restart.  It just hangs and I have to make a hard stop and start again.  If I remive the connection Wireless via safe mode things is back to normal.  However, the cycle repeats when the connection is restored and the computer enters mode "Eve".

  Hi bobert1953,

  This problem can occur when the power management profile turns off your network adapter.

  Method 1: To disable power management feature ent of network cards

  a. click on start

  b. right click on computer

  c. click on manage the

  d. click on Device Manager in the left pane of the window

  e. expand your network card.

  f. now you will see your network adapter or adapters if you have more than one. Right-click on the network component, and then click Properties.

  g. go to the power management tab.

  h. ensure that all check boxes are unchecked (check boxallow the computer to turn off this device to save power is off).

  i. When you have disabled the boxes, click ok and restart your system. Put the computer in mode 'sleep' and check if you still have any questions.

  Method 2: You're also talking about the steps mentioned in the article below, which deals with a similar question

  After you wake up, a Windows Vista-based computer or a Windows 7 sleep mode or Hibernate computer, the network icon and the speaker in the notification area icon do not show the correct state

  http://support.Microsoft.com/kb/937477

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer
  ---------------------------------------------------------------------------------------------------------
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Is it possible to get the computer will turn off after completing a task?

  Hello

  I was wondering, if I download a YouTube video, and while I'm waiting I put my computer in "Sleep Mode", when the download is complete will be my computer turns off automatically, or it stays on? I wonder because my internet is very slow and takes all day to download a single video, so I had to download excessive night but I'm worried about a fire or something to do while I'm asleep. If you can let me know it will stop automatically once the download is complete, I'll be very grateful for your time.
  Of
  Ryan.

  Hi Ryan,

  If you do it this way, the download stops when you put the computer to sleep.  Which, according to me, that you are looking for really to do is to use the Task Scheduler to set up a task to wake the computer from sleep mode, run the task and then put the computer to sleep when you are finished.

  To do this, please see the following 3 items:

  http://www.SevenForums.com/tutorials/12444-Task-Scheduler-create-new-task.html

  http://www.Vistax64.com/tutorials/166809-Task-Scheduler-wake-up-computer.html

  http://www.Vistax64.com/tutorials/171042-sleep-return-timeout-unattended-wake-up.html

  I hope this helps.

  Good luck!

  Kosh

• My computer stops responding when checking for updates (Windows 8 tp 8.1)

  My computer is running windows 8 and it stops responding when checking for updates.  I want to update 8.1 so I can then upgrade to windows 10.

  I get the error message is below.

  WindowsUpdate_8007041D OR WindowsUpdate_dt000

  Any help will be greatly appreciated.

  IMPORTANT! -Online support for Windows 8 ended Tuesday, January 12, 2016.

  If Windows 8.1 is not installed by February 9, 2016 (or even earlier), the computer will NOT provide for new updates, or the free update for Windows 10.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Assuming Win8 64-bit...

  Please answer each of the following [admittedly tedious] diagnostic questions in a list numbered corresponding type in your very next answer, preferably without quote this message:

  1. when (date about) have you buy the computer?

  1B. the computer came with preinstalled Win8, did you do a clean install of Win8 or have you upgraded (e.g., Win7) computer for Win8?

  2. What is the full name of your application or the third currently installed antivirus security suite (i.e., not Windows Defender!), if any, and when (date about) is your subscription current expires?

  3. what applications third-party a-squared (that is, not Windows Defender!) are installed, if any?  What third-party firewall, if any?

  4A give Norton or McAfee application ALREADY installed on the computer since you bought it?

  5. do you have a free trial Norton, or a test of free McAfee [a] come preinstalled on the computer When you bought it? (No matter if you have never used or activated).

  6a. is KB3124275, KB3124001, KB3121918, KB3109560, KB3110329, KB3121461, or KB3121212 listed in installed updates (not updated story)? [1]

  6B. what the KB2917499 or the KB2871389?

  7. What number of Update Version & KB are displayed in the second line of text using IE10 | [Alt + H + A] tab. for example, Updated Version: 10.0.54 (KB1231231) ?

  8. is Adobe Flash Player v20.0.0.272 [sic] installed? TEST HERE USING INTERNET EXPLORER or EDGE ONLY! -online http://www.adobe.com/software/flash/about/

  

  Example of the box Version information on this page

  (do not take into account any notice "outdated" red; ignore the table below the box for Version information)

  9 is Firefox (version 44.0 or superior) or Google Chrome (version 48.0.2564.97 or higher) or another alternative browser installed?

  10. are you familiar with "Registry cleaners" (e.g., Registry Mechanic;) System Mechanic; RegCure; RegClean Pro. Advanced SystemCare. Registry Booster; McAfee QuickClean. AVG PC TuneUp. Norton Registry Cleaner; PCTools optimizer; SpeedUpMyPC; PC Doctor; TuneUp Utilities; WinMaximizer; WinSweeper; Comodo System Cleaner. Advanced System Optimizer. Registry cleaner CCleaner component)?

  =====================================================
  [1] Control Panel | Programs and features. See installed updates (in the left menu)

• Satellite P200 - system crashes when left alone for a short period of time.

  Hello

  I have a Toshiba Satellite P200 PSPB6A - 17804M crashes when I haven't touched the keyboard or the mouse, for a period of time.

  The o/s is the version of Windows Vista Ultimate 32 Bit and specifications for the model are as link. But with a 128 MB ATI HD2600 video.

  Link: [link to the same laptop model: 0127 http://cgi.ebay.com.au/TOSHIBA-SATELLITE-P200-2.6GHZ-400GB-17.0%22-WX+-200-DVD_W0QQitemZ120369598613QQcmdZViewItemQQimsxZ2009?] IMSfp = TL090127161001r18426]

  I have updated all the updates Toshiba including the 2.50 bios update.

  Problem
  When left alone for s short period of time, my system crashes, although my mouse moves again. Click anywhere on the screen or by using the keyboard does not seem to get back to work. The only way I can then use my laptop is to do a hard reboot by holding the button power for 5 seconds.

  My system seems to work very well as long as I don't stop using the mouse or the keyboard.
  The time between when I finally used the computer and when it hangs can range from 5 minutes to 10 hours.

  I disabled all the parameters of energy saving, including the video recording without success.

  Can someone help me with this problem?

  Thank you Batty.

  Hello

  Your question seems really strange have you tried to reinstall the Windows operating system and to check if the problem would always appear?

  I don't know if this could be a software problem, but you should review it before that we were discussing other possible problems of material m

  Check it out

• Envy 15 computer laptop k000nx - we haven't found devices wireless on this pc

  Hi all

  I have a problem with my devices wireless on my Hp envy 15 computer laptop k000nx - 8.1 Windows

  I tryied many ways to activate the network wireless by reinstalling the drivers from the hp site and disable airplane mode.

  even when I use the Troubleshoot utility he sees only the cable problem.

  but there is no sign of my wireless or bluetooth, they're just gone.

  and here are some pictures for my problem...

  

  Hello:

  I agree that devices are not present and do not need drivers.

  I recommend that you contact HP technical support and file a case under the guarantee pension.

  The wireless and bluetooth are on the same removable wireless card and her card is defective or not properly seated.

  I would have recommended you remove and reinsert the card, but the service manual for your model indicates that this procedure is possible only by an authorized service center.

  I can see why you have to disassemble basically the whole notebook just to get on the wireless card.

• Page color Laserjet Pro CM1415fnw covers in cyan when left.

  I have a CM1415fnw pro Color Laserjet started dumping toner cyan on all print jobs. You can still see the entire job behind a wall of blue. It prints a few jobs if the printer is off and unplugeed for a little while but when left will do as shown above. seems properly print black and white if the setting for all of the work of the printer is configured to print in grayscale. I tried to clean and calibrate several times back to back and tried to update the firmware with no luck. Replaced all toners of color as they were almost empty probably about 7%, still no luck. Does anyone else have a similar experience? All other functions work fine.

  Hi RexJohnson,

  Sorry to hear that your printer is out of warranty now.

  On the manual, starting on page 233, it includes steps for quality problems that you can take a look at.

  LASERJET PRO CM1410.

  Make sure that the printer is connected directly to a wall outlet. (do not use a hub or a surge protector)

  This ensures that the printer is full on and can help this situation.

  Thank you.

• The error that says that I have not installed hard drive when I start the computer. Also, when I clicked on my D drive, he told me to the disc is damaged and inaccessible

  Original title:

  When I start my computer, a message on the screen says I have no hard drive installed. my computer will load eventually after many attempts and when I clicked on my D drive, where all recovery files are kept, it tells me that the disc is damaged and inaccessible.  Can someone help me before I'm locked out of the computer for good?  Thanks in advance Andy D.

  Determine the manufacturer of HD computer. Go to the manufacturer's website and download their software/utility to check the Dowload HD it and burn it to CD or DVD according to the instructions. Boot from the disc newly manufactured. Run the utility to verify. If necessary, replace the HD and restore backups.

  Tom Ferguson