HP envy 4 ultrabook heating problem

I am facing heating problem with my new HP envy Ultrabook 4 when I used my laptop on the lap for 15 min or any surface. I am not happy with my Ultrabook, according to the specifications of HP Ultrabook has technology cool sense.

msraju wrote:
my position is the Sweden and the temperature is 10 to 15 degrees.and my room temperature between 15 and 25 degrees only.

If this is the case, then you should not see questions like that.

What are the CPU temperatures you saw?  I recommend a free utility called CoreTemp.

What software utility you use to get the information of temperature.

In the Netherlands, where I live, the temperature was on average overall about 15 degrees. My Envy17-3002ea ready to temp CPU (Intel Core i7) of 45 Dec C at idle.

Tags: Notebooks

Similar Questions

  • Problems of WiFi HP ENVY TS Ultrabook 4-1118TU

    Hello

    I just bought a HP ENVY TS Ultrabook 4-1118TU.  Out of the box, I've connected to my Wi - fi and applied updates to Windows 8.

    Try to upgrade to Win 8.1 I experienced connection problems, loss of access to the Internet and get a "limited access" error on my network.  Eventually however I managed to finish the download and upgrade to Win 8.1.

    I always get problems connection by Wi - fi.  He connects very well, then abandon the connection.  Reconnection repeats the process.

    I tried all the solutions of common sense.  It is not Wi - fi or the location.  Other wi - fi devices work perfectly without connection problems.  I conclude that it is the Ultrabook, and by reading the tech forums, I see it seems to be a common fault with HP products.

    In light of the laptop is new, please suggest a solution.

    Thank you very much

    Simon

    Hello eplus9,

    Welcome to the HP Forums!

    I understand that the computer is experiencing difficulties wireless since the upgrade to Windows 8.1. I will do my best to help you!

    Since it occurred after an upgrade, the question is probably based on a conflict of driver. I suggest you reinstall the appropriate drivers for this computer. The best way to proceed is by using HP Support Assistant. Here is some information on how to do: download or update of software and drivers for HP computers

    If this does not resolve the problem, I encourage you to do a Windows 8 regenerate. This will restore the computer to Windows 8, so that clean it. Once you do this, you can restore the computer to Windows 8.1 and see if the problem is resolved. For more information, please refer to this Microsoft document: How to refresh, reset or restore your PC

    In my view, that this information will be able to solve the problem. Whatever it is, please post your results. Thanks for posting on the HP Forums. Have a great day!

    Mario

  • Help! Disable the touch screen on Envy Touchsmart Ultrabook 4

    Hi, I have a problem, try to disable the touch screen of the Envy Touchsmart Ultrabook 4 function in Windows 8... I was looking for an answer on how to do it, but I did not find anything. I tried the method of the control panel > hardware and sound > pen and touch and then disable the option "use your finger as input device", but this option is not there for me! If anyone knows how to do this, I would be very grateful.

    Hello

    I have another type of TouchSmart, but this may work for you:

    1. Press Windows + X logo.
    2. Select Device Manager from the list.
    3. Click on the small arrow next to Interface devices to expand the list.
    4. Click the touchscreen driver (in my case, Voltron NextWindow touch screen).
    5. Right click and select disable from the list.
    6. Click Yes in the dialog box that asks you if you are sure you want to disable the touch screen driver.

    When you want your touchscreen to work again, follow the above procedure, EXCEPT when right-clicking on the touch screen driver, select enable.

  • Install Windows 8 - cannot find my SSD disk hard - HP envy 4 ultrabook - 1046TX

    I downloaded the upgrade of windows 8 for $14.99 and have managed to create a boot usb device. I was able to run the installer until the stage where windows has found hard drives. I have an SSD and windows is unable to find it during the installation. Can someone help me? I have a HP ENVY 4 ultrabook...

    Same problem here. I think it is a driver problem. HP people are those who should solve. It seems that other people have the same problem (http://windows8forums.com/windows-8-installation-upgrade/11607-cant-install-win-8-hp-envy-4-1046tx.html). And someone has solved through HP!

  • Pavilion g6-2235us: heating problem

    I don't know what to do for his problem of heating... it is heated on a use of the lamp... and for the games. don't ask her single gal or thermally some time stop. Really it heated so much worse, I had already sent to the HP service center but heating continues. Please bypass this issue

    vibhav56 wrote:
    He was doing in April right there that my components laptop just stop working (keyboard, touch pad)... but after having repaired a month of heating problem, new beginning or for games, I do not use heavy... only NFS 2012, CS Games only... and even those games is not working properly... Please suggest what to do...

    FYI your form does not work, you may think that it will be - but to the laptop, it can't handle it.

    vibhav56 wrote:
    A question what is the life expectancy of the battery... FR my laptop warranty on in November 2014 and the battery drain so fast... not even give a backup of time. For me I not happy with this laptop... not for performance, built or the work of m...

    Batteries do not last forever...

  • Trying to find advanced settings of the BIOS on my envy Touchsmart Ultrabook 4

    I'm trying to locate my envy Touchsmart Ultrabook 4 power management settings.   I am running the Insyde BIOS verision F.23.  When I open the BIOS to F10 (I also tried F10 + A with no result) before starting the only options are to hand, security, System Config. in and out.  Is anyway to get the advanced settings in the BIOS?  Thank you.

    Woodyzen3000,

    I understand that you are looking for the power management option in the bios.

    After doing some checking this bios has no option for the management of food as some old versions of some time got back on our old systems. I was actually able to get their hands on a similar Ultrabook built with the same version of the bios and the options are no longer present.

    It is possible that perhaps a next version will be the available option. In order to keep an eye on this link because the future updates to the bios would be here. You simply enter the product number, and then select your operating system.

    If you have any questions do not hesitate to ask.

    Thank you

  • Envy Touchsmart Ultrabook - boot from Usb Flash or optical drive

    I just this envy Touchsmart Ultrabook (14 inches) with 8 win and it works very well, but one thing that I can't make it work is to be able to boot from a USB stick or a cd usb player.  This system doesn't have a built-in optical drive.

    I changed the configuration Bios Boot UEFI for Legacy and also re arranged the boot order so the USB drives are before the internal hard drive.  I also tried to change setting USB 3 auto... still not able to boot from a usb device.

    Both the usb flash drive and cd drive to boot on my HP desktop and I recently tried the usb flash drive on a new laptop Lenovo comes with Win 8 and it worked.

    I need to do so that I could run my backup - Acronis True Image software.

    Any suggestions on what then try?  Thank you.

    Yours is a laptop very different mine - so this may not apply... but you can try what I posted here: http://h30434.www3.hp.com/t5/Other-Notebook-PC-Questions/bios/m-p/2260991

  • HP Envy 4 Ultrabook: what docking station works with HP Envy 4 Ultrabook?

    I have a HP Envy 4 Ultrabook, and I want a docing station that works as both a plug-in and plug out. I need to connect a monitor, keyboard and mouse are wireless

    There are two different sets of Envy 4 Ultrabook, but assuming that it is the manual for your:

    Manual

    There is no connector dock hardware on the laptop. Therefore, no nod to the bottom dock is available. The only choice would be a USB 3.0 dock, which feeds the laptop so you should have to plug an AC adapter and a USB port whenever you wanted to 'dock '. So, by doing this it would connect a monitor, mouse and keyboard. A no more than a glance down.

  • Dell Latitude e6430 core i5 heating problem

    Mr President, I have Dell latitude e6430 running windows i5 is 10 having heating problem it is light enough heat to burn the hand on the left side of the laptop and that's when the battery is also reduced. Please kindly help me solve this problem

    I like to think of that update you the System Setup (BIOS). Please enter your service tag (or use automatic detection of your product) on the link below and then click BIOS.

    www.dell.com/.../Products

    I also suggest to read the article in the link below, if all goes well it help.

    EDIT

    Download.cnet.com/.../troubleshoot-your-Windows-Laptop

    Learn more... >

  • Battery HP Envy 4 Ultrabook problem

    I am facing battery problem I am getting backup 3 1\2 hours only. After battery is 100% charged I remove charing and help. I'm not happy with my Ultrabook battery backup, according to the specifications of HP Ultrabook has good battery backup.

    If you want to put a longer usage time of battery in power saving mode.

  • HP envy m6 will heat up too quickly

    my hp envy 1102tx m6 warms up very quickly. It gets very warmed up even if I'm using facebook or notepad. What should I do?

    Mariane,

    Welcome to the HP Forum.

    Maybe a bit of dirt.

    Start here:

    Reduce the heat inside the PC to avoid overheating

    There are other links in the first document for more information.

    ===========================================================================

    If you decide to update your BIOS, consider that, in almost all cases, the update was successful.  It is important to be prepared.

    • Make sure that ALL backups are up-to-date and complete - this means that everything you need to restore the system in case something goes wrong.
    • Understand that even when you do everything exactly right, you can end up with a bricked computer, that is an expensive paper weight.  Make sure you have at least your critical data on some form of external backup.
    • Unplug the USB drives and other useless material.  Keyboard and mouse can stay connected.
    • Always run power cable to update the BIOS, never on the laptop battery
    • Touch the system during the update is underway
    • Optional: Leave wireless ONbutton.  You could turn off the router to ensure that there is no interruption.

    Updated the BIOS

    ============================================================================

    If the problem worsens, see the following:

    Portable desktop computers - troubleshooting overheating and Auto Shutdown issues - Windows XP-Windows 8.x

    If repair is required:

    You can choose to make repairs on your own, or you can send the laptop to a home of reliable repair.  HP can make the repairs for you, if you choose.

    Your reference system:

    Laptop HP ENVY m6-1102tx support

    Guide to maintenance and Service m6 HP Envy

    Contact HP

    Support Portal worldwide

    Contact telephone support HP - USA-

    Guarantee required - us. and Canada

    USA - contact HP / / Self-Help-Email - Chat

    Click on the Thumbs-Up Kudos to testify and say thank you.

    When the answer is a good patch or solution to your Question, click accept as Solution !

    Although I strive to reflect best practices of HP, I do not work for HP.

  • MacBook pro 2015 Diode, heating problems

    Hello

    I just bought a MacBook pro 2015, one with 2.8 GHZ, 16 GB RAM and ITB Flash. [old just four days]

    The question being, the first day of the machine as well as the charger were burning Red hot when I loaded for the first time, in subsequent attempts, heating got sorted out by itself.

    Nevertheless, I had installed the temperature gauge in the machine, I look one only a few videos YouTube youtube and navigation.

    Once in every two hours a message like

    The led O GPU temperature is 106 degrees, closing applications.

    Once I click on the tool, the temperature is now reset to 30 ° C. It seems that the temperature of the Diode is to reach 106 degrees, some app is closed (no one knows the tabs I have open in Safari are works well) and then it resets.

    Is it really a problem with the thermal conductive paste or a faulty diode.

    I go to the Apple store this Saturday? Can I return the laptop and request a new or a full refund.

    Can someone please advice?

    If you bought Apple with the last 14 days, you can return it for a full refund.

    http://store.Apple.com/us/help/returns_refund
    Then you can buy a new one.

    What about Apple and they can exchange it without having to go the way of reimbursement.

  • MacBook pro 15 "heating problem

    My MacBook Pro that I bought in early 2015, has recently started abnormally warm under normal workload.

    I started facing this problem last month. Is what I run Firefox, watching videos on YouTube. Within a few minutes, the fan starts and the bottom heats up to an unbearable temperature.

    I followed most of the steps in order to maintain well ventilated, but often I tend to keep my turn.

    I checked the activity monitor, and it doesn't seem to be any application other than my web browser that uses the CPU. I even rebooted my mac a couple of times hoping that would solve the problem but it didn't.

    Help, please!

    Try resetting the SMC http://support.apple.com/kb/ht3964

  • spectrum x 360: ScrollBar and Touchpad heat problems

    Hi everyone, I just got my x 380 13-4110dx spectrum model. After months of research on laptops, I settled on the spectrum, and it had shipped all the way from the United States to Bangladesh here. Needless to say that the questions arises as soon as I turned on the thing, so that's:

    TOUCHPAD:
    This is the big one. I'm used to having the page move down with my fingers while two fingers to scroll, but the direction of travel is reversed by default with coasting trade licence. However, when it is turned off reverse the scrolling and cabotage in the settings of synaptics it seems to work on some applications and not anothers. I tried to reset the onboard computer and reinstall the driver software AND I also tried to install the latest drivers from the synaptics Web site. Nothing works not so far

    HEAT:
    The bottom tends to run very hot even with normal web browsing, so I can not put the thing on my lap for a long time. I have install the fan to operate always from the BIOS, but its still the same. At this temperature, I do not know how long the material is going to hold up

    Sorry for the long post, I really hope you guys can help me understand things

    After a lot of frustration, for the past few weeks my touchpad has been behaving satisfactorily. Here's what I've done, maybe it will help someone else here who has the same problem:

    • Make sure the driver is updated to 192.0.12.107
    • Go to Device Manager, open the properties of the mouse and click on 'Update device driver.
    • In the wizard that opens, click on "Browse my computer for driver software".
    • Then select "Let Me pick from a list of drivers for devices on my computer.
    • In the next window, uncheck "See list of compatible hardware" and search for and select "Synaptics Clickpad SMBus"
    • Install and reboot the computer

    Windows installs the driver Synaptics Touchpad of SMBus by default, which leads to the scrolling issues I was experiencing. The pilot clickpad works much better. I don't know how the two drivers are different, but it worked for me

  • Satellite P100-307 - massive heat problem, keypad heater

    Had my Satellite P100-307 for almost two years now and it's a good and useful media-notebook, but it never HOT side left keyboard, especially games.

    But in recent weeks, the keyboard is pretty HOT and I don't know why! Because I6vgt ´m using only low level applications.

    I did a full restore to clean any virus or other malware, but it continues to get hot, as if I where in the highest graphics modes, the games, but just I m using IE7 and a LateX editor for the creation of PDF Documents - that s nothing for a dual-core processor! Kaspersky 7.0 has been throtteld down, as far as the security is allwoing it.

    So why it s heat like that in 30 to 60 Minutes. He has never done this before, I m sure.

    It s so hot, it's quite unpleasant to work with her, because placing even the heel of your hand next to the touchpad makes my hand sweating!

    Would be grateful for any comment or advice,

    Greetings
    AFK

    Looks like the laptop is overheated, it is a common problem with laptops that are used in a dusty environment (a room with carpet, for example).

    Buy compressed air in a box and spray it in the vents to remove dust.

Maybe you are looking for