HP ENVY 4500 SERIES: my printer does not print words

Similar Questions

• HP Envy 4500 Series: Failure print

  HP Envy 4500 Series

  Recently installed above "All in one printer.

  Impressions on lazer standard copy paper OK but will not print on glossy paper HP?

  I tried to 180grm of 150gm paper weight. With the success of 'Hit and Miss' .

  I think it's a mistake of the printer, that is to say; resuming is not paper glossy!

  Re-inatalling instalation disk help?

  Any help wouild be appreciated

  Thanks for responding so quickly

  Re HP Envy 4500series

  Printer not feed or pick up paper HP clossy

  Tried 180g and 150g and double face HP Lazer bright

  Also tried to adjust the paper on the selection 'print '.

  Brian 26

• HP ENVY 4500 series [D37511]

  I'm on a MAC on HP ENVY 4500 series [D37511] print. How to print grayscale? Adjustment instructions of the printer in the user's manual do not operate on MAC, nor do they work in the control panel of the printer, there is no Advanced menu the printer Optioins.

  Hello colettestp,

  Welcome to the HP Forums.

  I did some research on your question on how to print in black and white.  Please click on the following link which explains not only the path, but it also shows screen shots to help you.

  How to print in black and white?

  Please do not hesitate to write me again if you have other questions for worries.

  See you soon,.

• HP ENVY 4500 Series (network): scan negatives

  I have the HP ENVY Series 4500 (network) printer/scanner/fax machine and would like to know if it is possible to scan 35 mm negatives and save them as a digital file on my PC?

  Hi @jvtorto,

  Only scanners with a media support Transparent able to digitize 35 mm slides.  The Envy 4500 series does not include such a feature and therefore does not support the slide or negative scanning.

  You can consider a scanjet.

  Negatives and slides scanning

  You can use the link above if you get a Scanjet which scan negatives.

• 4501 envy: ENVY 4500 SERIES

  Mobile printer to another computer. Downloaded Envy drivers from this site. After the instalation, I get a message that the system is 32-bit, but the software is 64-bit and will not go further.

  plug on this state of site software for the 4501 want is 32 or 64.

  does not hace access to of the original CD.

  Any ideas?

  Hello @ARGaylord,

  I understand that you are unable to install the software for your printer Envy 4500 series on your computer running Windows XP. You install this file: EN4500_198.exe?

• HP envy 4500 series: series like 4500 hp does not print

  printer prints test pages simply awesome.

  When I try to print, page comes out blank?

  Help, please

  Thank you

  John

  Hi @jsk4224,

  Thanks for joining the Forum from HP Support for a solution to your printing problem.

  I understand that you use a HP ENVY 4500 e-all-in-one printer with a Chromebook and and print pages of test very well but work sent from the Chromebook fate in white. I would like to help with that.

  Here is a support document which can help with this question - printer prints blank Page or fact not printing black or color ink.

  Please let me know if that solves the problem, or if you need assistance.

• HP Envy 4500th: abnormal termination: black does not print

  4500th HP Envy printer gave "abnormal termination, possible damage" message only once , when I recently turned printer (I think that I had previously disabled the front strip of the printer had completed the stop).  Since then, (almost brand new XL cartridge) black ink prints--I can't make copies or print from a document.  I have unplugged, replugged connections, removed and reinstalled black ink cartridge.  Page of Test print head print color ink [perfectly but no black ink, alignment same page.]  I also clicked clean printhead, restoration or the faculty.  Should I try a 'hard reset '?    Or what?  I've been helping HP for 4 hours.  Staples has recommended uninstall then reinstall the printer.   All, it's very hard for this old lady-.    Printer is 19 months old, is more under warranty.

  Try here.

  http://support.HP.com/us-en/product/HP-envy-4500-e-all-in-one-printer-series/5304875/model/5304876/document/c03768188/

  Let us know.

• HP Envy 4500 series printer all in one

  What photo paper setting should I use to print with metallic photo with my HP Envy 4500 printer paper to avoid the smear of ink on the images?

  Hi silverwolf55,

  Welcome to the HP Forums.

  I see you are trying to use the metallic photo paper when printing photos.

  Just to let you know, metallic photo paper is not supported with the HP printer.  If you want to try to use the metallic photo paper, I suggest affecting the Best quality level so that the printer prints slow page. This will reduce the risk of smears and streaks.

  Thanks for your time.

  See you soon,.

• HP deskjet series of 1510 does not print

  We recently mloved to la Gomera (Canary Island) and there I bought an hp deskjet printer 1510. It will not print when connected to my laptop, also a HP with Windows vista, although it is connected, is on and is the default printer. I tried everything the doctor print and scan suggested (like cutting the fire walls, check print ooler, reinstall the driver and software etc.) and everything that I found in the taking in charge of HP. still does not print. When it is connected to our other laptop, HP also but with windows 7, it works fine. The only thing that I managed to print is a diagnostic page but it gives only numbers and letters like SN = CN39a19mmp05yr 21 PG = 81 12 BY =-5 yr 22 FB = 0/0, etc.. Nog is far from help me :-(.  someone knows how to fix this?

  Hello

  Please try the below mentioned steps...

  Click START > device and printer > add a printer > add a local printer >

  (if the printer is connected with USB)

  Select "Use existing Port" then Virtual USB from the drop-down menu, click on NEXT, in the production list, select HP / Hewlett-packard and in the right pane, select Deskjet 6980 and finish the wizard

• HP ENVY 4500 series: how to find back my double-sided printing my print setting option?

  HI, I have problems with printing double-sided. Double-sided printing option was available before but it dissappeared from the option, there were 4 options before but only one side and manual double-sided print were left. I can't seem to find where to make this option to return and I have urgent need for printing. I can't print the application pdf, word documents, online either.  IM using asus computer laptop with envy 4500 hp printer, please help me as soon as possible.

  The duplexer must be enabled in the driver.  Follow these steps: go to the folder, devices and printers, right-click on Envy 4500, printer properties, settings of the device, Installation Options, and then set it to the duplex unit installed, apply.

• HP ENVY 4500: online course material will not be printed

  Hi, I make an e-course and there are videos and material of printeable-i have been printing the documents for a few days but now I can print is no longer. When I go to pring it takes me to the window to print as usual, but here it gets stuck on «Loading preview»

  Everything is good with the printer I can print word documents.

  Thanks for your help.

  Maria

  HI Maria,

  What program are you printing from?

  A print preview is provided by the application used to print and not by the driver of HP.

  If the program is unable to load the print dialog box is something to do with the program itself.

  It can a web contect?

  For such an I suggest to try another web browser and search for any differnce.

  For any question, please specify the information above.

  Shlomi

• ENVY 4500 that partially prints a page

  4500 newly installed FANCY, use wifi. Prints either: only two pages, be two third of a page of what any. HP Print and Scan doctor, test page seems OK with all colors represented, but it is only printed on the top half of the page (not sure what the page should look like). With the help of WIndows 8 and the error message: "printer could not print word / PDF etc ' when printing stops. I tried shutting down and turn both machines. Can someone help me please? I'm not the most techie of people's minds.

  Hello

  I have a similar problem with my HP Envy 4504.

  I use Windows 7 service pack 1 and a 64 bit system.

  When I print documents that are greater than a page of the printer does not print the entire document.

  Now he stopped after 4/7 pages, a few moment a go after 3/7 pages. Even a 2 page document prints only half.

  I get no error. The printer stops just feel like at some point to a page... I reinstalled the drivers twice and have the same problem on two devices that are connected to the printer (one of them is a computer hp laptop).

  Help, please!

• HP Envy 4500/Series: Cablelink (Austrian cable service) / installation HP Envy 4500 series problem

  Hi, I have a new HP Envy 4500, and it does not connect to my wireless network. He sees the correct SSID (using WPA - PSK / TKIP or AES), but he will not join the network after providing the WPA key. Printing test results shows a FAILURE on > parameters - without filtering. I don't know if I use MAC filtering on the network, because I don't know how to check this on this modem.

  I am also unable to join using the WPS procedure. I tried with and without a USB connection. I have 5 other wireless devices on the network, which all connect without any problems.

  In addition, I put static IP details on the Panel after reading the HP forum where this problem was stated by setting just the IP address and no subnets. Still no connection

  The printer works via USB ok.

  I got it connected to my neighbors A1s wi - fi network.

  I have a new wireless network to cable and modem put cable in the last week connected to Cablelink. I have a new router Cisco EPC3940. I tried to restart, connection to WPS and wireless USB connected. Reset the printer and modem and tried with and without using a static IP address.

  I tried to reconnect to my neighbors A1 connection - success.

  I tried with USB lead-success

  I tried direct to print without wire-success

  I tried to share wireless USB by using HP software-failure

  I tried the HP PC don't doctor too - no available solutions.

  I have read and tried several fixes on the HP forum-no success

  The fault is clearly my printer connect to my cable modem wireless (or my printer connect to my wi - fi of Cablelink) like all other connection works!

  I posted at the end of a similar position, but did not respond. Help please.

  Carl

  I finally solved this problem after 2 weeks of trying everything! Based on the above comment from BH, I thought that I had to turn off my radio show from 5 Hz. My new router has prevented to me because of the way Cablelink run their software. However, I finally got access to change it. I disabled 5 Hz. I still have the invalid password! Then, I changed the predefined WPA WPA2. It worked. I turned on my 5 Hz back show, the printer is remained connected. I then changed back to WPA2 and immediately lost connection! I put it to WPA and it connected again! I did NOT change key wireless, he remained at 16 characters, just the level of security! It seems if I want my Envy NEW 4500 with UPDATE drivers on my wireless network, I have to REDUCE my password security, which comes by default with modems cable new with Cisco, and accept the WPA! The strange thing is my old Iphone 4 and my old Apple TV both connected without problem. Therefore more recent Iphone to my wife 5 c and our newest Samsung UHD TV. So why a NEW model of printer is sold in stores right now, not able to work on WPA2? I lost 2 weeks on this issue before the sort it! It works, but I'm not happy! Same HP UK failed to connect after 4 hours on their online chat and remote assistance online! I worked it out myself from the comment by BH! Thanks BH. HP POST PLEASE A REPLY ON THIS THREAD WHEN YOU FINALLY WRITE A SOFTWARE FOR YOUR PRINTER TO WORK ON WPA2. MAYBE YOU CAN EMAIL CISCO IN ORDER TO WORK OUT HOW TO DO THIS BETWEEN YOU.

• HP Envy 4500 series: printers has been removed

  Help, please! I accidentally reset my settings to the printer when you try to restart my printer because it was frozen. I tried to reinstall the printer several times but failed. When I'm in the printers option in my settings, I tried clicking on the button "+" to add my printer, but have been unable to get it to connect. It is completely wireless and I can not get the printer to appear in any screen. When I got to my printer a few months ago, my computer basically put it all for me. No cables needed. I desperately need help my printer because I am a graduate student and need to print almost every day. Any help would be wonderful I've exhausted all possible ideas I have.

  Thank you!

  Hello @kkall,

  Welcome to the Forums of HP Support!
  
  I would like to help you today with the addition of your wireless HP ENVY 4500 e-all-in-one printer on your computer Mac OS X 10.10. I understand that everything has started when you accidentally reset your printer settings. Therefore, I will start by ensuring that your printer is always connected wireless. Once we determine if the printer is on the network and 'talk' wireless with your Mac, you should be able to (+) add your printer back in. Please follow the steps below.

  Step 1: Check of connectivity:

  1. On your printer, down arrow until see you Wireless
  2. Select OK in the wireless
  3. Select Wireless details and click OK
  4. Make a note of the IP address that appears
  5. On your Mac, open your internet browser
  6. In the address bar type the IP (omit for www.)
  7. Search this site
  • Opens a Web site for your printer: If means that your printer and your computer "speak" wireless. Please proceed to step 4 below.
  • If a Web site for your printer does not open: This means that your printer and your computer communicate wirelessly. This would result in your Mac not to 'see' the printer (+) Add again. In addition, If none displays IP address on the printer, which means that the printer is is more connected to your wireless network. Please follow the steps below.

  Step 2: Run the Setup wireless Assistant:

  1. On the front panel of your printer, down arrow for the Wireless option
  2. Click OK
  3. Select the wireless configuration wizard , and then click OK
  4. When you are prompted to choose your network name SSID
  5. Fill in your password (key) wireless. It is case sensitive.
  6. Once the wireless is connected successfully, check the IP address of the printer
  7. Now, on your Mac take the IP address and enter it in the address bar of your internet browser
  8. Search this site
  • If the Web site for your printer opens: The printer and the computer are now 'talk' wireless. Please proceed to step 4 below.
  • If the Web site for your printer does not open: The printer and the computer are not 'talk' wireless. Please proceed to the next step.

  Step 3: Powercycle network:

  1. Start by unplugging the power cable to your router
  2. Once your router is unplugged, turn your printer off
  3. Then, shut down your computer
  4. After 30 seconds to 1 minute, reconnect your router back in
  5. Then, turn on your printer
  6. Turn on the computer

  After a few minutes the internet connection will be back. On your computer to access a few sites test Web to verify that the internet is running correctly. Once the internet works again check again the IP address of your printer. Try to open the site on your Mac printers again using the printers IP address.

  Once you are able to open to the site of printers successfully, proceed to the next step.

  Step 4: Add your printer:

  1. click on the menu of Apple , then Preferences System.

  2. click on Print & Scan

  3. click on the plus sign , click Add a printer or a Scanner, click the name of your printer

  4. click on the area of use or with the help of Print and then select the name of your printer on the shortcut menu. Ensure that the driver HP Envy is.

  

  5. click Add to add the printer to the list.

  -Source

  Now that your printer is added, please try printing again.

  Please reply to this message with the result of your troubleshooting. Good luck!

• HP 4500 g510g-m: Scan does not

  Hello

  I have a hp 4500 g510g-m. It worked fine until about a month.

  When I want to scan a document, I open HP Solution Center select Scan > Scan document. Open it and then imaging software I press scan and nothing happens, it just goes back to the HP Solution Center. The software does not.
  
  I tried to use HP Scanner and Fax Troubleshooting Wizard, but it detects any problems. When I try to use the printer Scan option PC nothing happens.

  I also tried to uninstall and reinstall HP solutions Center and the problem is still there.
  
  The only solution I have found so far is to restart the laptop and turn the printer off. But do this every time I need to scan somethinf is not a solution to all the...

  Can someone help me please?

  Hello
  
  Thank you for using the HP forum.

  You can try scanning HP and Capture apps in HP AIO Remote?

  HP AiO Remote apps

  Follow these steps to get the applications (if it is not already installed):

  1. Go to the Windows store
  2. Search for "HP AiO Remote" apps
  3. Install the apps.
  4. Apps should detect your wireless printer, depending on the applications, there is a function "Scan."
  5. Click the Scan and it will direct allows you to download apps "Scan and capture.
  6. After installation, you should be able to scan.

  Hope that helps.