HP ENVY 4500 series: how to find back my double-sided printing my print setting option?

Similar Questions

• HP Envy 4500 Series: Failure print

  HP Envy 4500 Series

  Recently installed above "All in one printer.

  Impressions on lazer standard copy paper OK but will not print on glossy paper HP?

  I tried to 180grm of 150gm paper weight. With the success of 'Hit and Miss' .

  I think it's a mistake of the printer, that is to say; resuming is not paper glossy!

  Re-inatalling instalation disk help?

  Any help wouild be appreciated

  Thanks for responding so quickly

  Re HP Envy 4500series

  Printer not feed or pick up paper HP clossy

  Tried 180g and 150g and double face HP Lazer bright

  Also tried to adjust the paper on the selection 'print '.

  Brian 26

• HP ENVY 4500 series [D37511]

  I'm on a MAC on HP ENVY 4500 series [D37511] print. How to print grayscale? Adjustment instructions of the printer in the user's manual do not operate on MAC, nor do they work in the control panel of the printer, there is no Advanced menu the printer Optioins.

  Hello colettestp,

  Welcome to the HP Forums.

  I did some research on your question on how to print in black and white.  Please click on the following link which explains not only the path, but it also shows screen shots to help you.

  How to print in black and white?

  Please do not hesitate to write me again if you have other questions for worries.

  See you soon,.

• HP ENVY 4500 Series (network): scan negatives

  I have the HP ENVY Series 4500 (network) printer/scanner/fax machine and would like to know if it is possible to scan 35 mm negatives and save them as a digital file on my PC?

  Hi @jvtorto,

  Only scanners with a media support Transparent able to digitize 35 mm slides.  The Envy 4500 series does not include such a feature and therefore does not support the slide or negative scanning.

  You can consider a scanjet.

  Negatives and slides scanning

  You can use the link above if you get a Scanjet which scan negatives.

• 4501 envy: ENVY 4500 SERIES

  Mobile printer to another computer. Downloaded Envy drivers from this site. After the instalation, I get a message that the system is 32-bit, but the software is 64-bit and will not go further.

  plug on this state of site software for the 4501 want is 32 or 64.

  does not hace access to of the original CD.

  Any ideas?

  Hello @ARGaylord,

  I understand that you are unable to install the software for your printer Envy 4500 series on your computer running Windows XP. You install this file: EN4500_198.exe?

• HP 4500 Envy: How to DISABLE the HP Envy 4500 status/confirmation email after you have sent the print job?

  How to DISABLE the HP Envy 4500 status/confirmation email after you have sent the print job?

  I don't want to receive the email confirmation of the printer - how do I disable it?

  Hello

  Please sign in to your account connected HP

  b click my account

  b click on Notifications.

  (c) uncheck the e-mail notifications

  d save change

  Kind regards.

• How to disable double-sided printing on HP jet Office 6700

  I just bought a HP officejet 6700 premium for my iMac computer. I also installed Microsoft for my iMac. I don't want the duplex printer forever. I tried going to system preferences / printers, etc. and it directs me to the Web site of the printer. From there I can't find a way to change the default to double-sided printing to 'off '. What impression in Word, select print and then show presets, and it is said that double-sided are turned off, but still, it prints double-sided. I also tried to register a new printer with printing double-sided as off and it still prints double-sided. I also do not know how to change the default setting on the printer. Any help would be greatly appreciated.

  Hi crayric,

  We gladly invite you.

  The above information refers to Mac OS X, however, I included the steps for the latest versions of OS X (10.7 or 10.8) because you did not mention the version of your operating system.

  If you have an earlier version of the OS 10.6 or 10.5, you may need to click the icon shaped triangle next to the name of the printer to spend the print settings in the print dialog box.

  For any question, please specify your exact OS version (you can find that out by clicking the Apple icon, then the about this Mac, also well let me know the exact Office for Mac version installed on your Mac (2004, 2008 or 2011).

  Shlomi

• oficejet 6700 premium: HP Officejet 6700 Premium WIN 7 - double-sided print - back comes out backwards

  HP Officejet 6700 Premium - os Win 7 - double sided printing - back comes out backwards. I TRIED TO DOUBLE-SIDE PRINTING, BOOKLET PRINTING, AND PRINTING GREETING CARDS. ALL OUT UPSIDE DOWN AND ALSO very small PRINT ON ONE SIDE OF THE PAPER HALF. HOW TO SET THE PRINTER SETTINGS BY DEFAULT OR CHANGE WHAT IS PAST?   Oh it then, I'm not yelling, just noticed the hats were on.

  Jay B.

  Hi @Jayburn,

  Welcome to the HP Forums!

  I noticed that the back comes out on top down, when duplex printing with your HP Officejet 6700 Premium, Windows 7. I am pleased to see that for you!

  Please, take a look through this guide, print on both sides of the paper (duplex printing) for HP Officejet Premium 6700 e-all-in-one printer (H711). Follow the instructions for Windows.

  Guidelines General double-sided printing

  Do not print on both sides of the following types of paper, or paper jams may occur:

  • Transparencies
  • Envelopes
  • Photo paper
  • Glossy paper
  • Paper lighter than 60 g/m2 (16 lb).
  • Heavier than 105 g/m2 (28 lb) paper.

  Several kinds of paper require a specific orientation when you print on both sides of a sheet. It's letterhead, preprinted paper and paper with watermarks and pre-perfores holes. The printer will print the first side of the first book. Load the paper with the top edge first and the side to be printed facing downwards.

  I hope this helps!

  "Please click the Thumbs up icon below to thank me for having responded."

• How can I print A4 borderless with double-sided printing?

  I have a HP Photosmart/premium printer and print booklets in Word 2010. When I do, the text and the photos come out compressed because the printer is put into a border on the right edge. I need to print without margins, but with duplex printing using A4. I get a message saying that these 2 are incompatible. How can I replace it? If I print in A4 without border, text, and pictures look correct (the same as on the screen), but I need to print duplex as well.

  Hi Katiepic,

  Borderless printing and double-sided printing is not supported at the same time. You have to manually duplex work by putting it into the paper tray to print on the back.

• Want 5530: double-sided printing 5530 hp envy

  After uninstalling and reinstalling the 5530 want to my laptop to fix a connectivity problem, I can't find the option to print double-sided. I tried to update the software of the printer, but do not always have option for double-sided printing. How can I be able to restore the double side print?

  Hello
  Make sure the automatic duplex printing option is selected:

  Enter the control panel > devices and printers.
  Right-click the printer icon, and then click printer properties.
  Click the device settings tab.
  As installed in Duplex Automatic Two-Sided accessory and then click OK to save the change.

  Try now print and check for the difference.

  Kind regards
  Shlomi

• HP Photosmart 5524 - double sided printing - back comes out backwards

  I bought this printer last week and she chose specifically because it's "automatic double-sided printing. However, when it is set to print (flip on short edge) the back is reflected backwards.

  Does anyone know how to get all pages of reading in the same way?

  Two sided with the parameter ' Flip on short edge ' prints the pages in this way. When you bind the sheets of paper on the shorter side (top of page) the reverse page should be printed in reverse to ensure readability.

  If you want both sides to be printed the same way, try the two sided with the option ' Flip on the side the longest. "

• How to disable the Illustrator failing to double-sided printing?

  IM using cs5.5 and I cannot find any option in the print window to enable printing recto-verso/disable.

  The default printer on my Mac settings have already been set for 1 back.

  This is coming from the ppd that is assigned to your printer driver. Each printere is different, but your location should be similar to mine.

  Print > printer button > Layout to the characteristics of the printer (or similar) > Duplex (or double sided printing)

  

  You may also be able to modify this function on the master server if you have a stand alone RIP (change the default settings for received files), or the menu button on the printer display panel.

• HP Envy 4500/Series: Cablelink (Austrian cable service) / installation HP Envy 4500 series problem

  Hi, I have a new HP Envy 4500, and it does not connect to my wireless network. He sees the correct SSID (using WPA - PSK / TKIP or AES), but he will not join the network after providing the WPA key. Printing test results shows a FAILURE on > parameters - without filtering. I don't know if I use MAC filtering on the network, because I don't know how to check this on this modem.

  I am also unable to join using the WPS procedure. I tried with and without a USB connection. I have 5 other wireless devices on the network, which all connect without any problems.

  In addition, I put static IP details on the Panel after reading the HP forum where this problem was stated by setting just the IP address and no subnets. Still no connection

  The printer works via USB ok.

  I got it connected to my neighbors A1s wi - fi network.

  I have a new wireless network to cable and modem put cable in the last week connected to Cablelink. I have a new router Cisco EPC3940. I tried to restart, connection to WPS and wireless USB connected. Reset the printer and modem and tried with and without using a static IP address.

  I tried to reconnect to my neighbors A1 connection - success.

  I tried with USB lead-success

  I tried direct to print without wire-success

  I tried to share wireless USB by using HP software-failure

  I tried the HP PC don't doctor too - no available solutions.

  I have read and tried several fixes on the HP forum-no success

  The fault is clearly my printer connect to my cable modem wireless (or my printer connect to my wi - fi of Cablelink) like all other connection works!

  I posted at the end of a similar position, but did not respond. Help please.

  Carl

  I finally solved this problem after 2 weeks of trying everything! Based on the above comment from BH, I thought that I had to turn off my radio show from 5 Hz. My new router has prevented to me because of the way Cablelink run their software. However, I finally got access to change it. I disabled 5 Hz. I still have the invalid password! Then, I changed the predefined WPA WPA2. It worked. I turned on my 5 Hz back show, the printer is remained connected. I then changed back to WPA2 and immediately lost connection! I put it to WPA and it connected again! I did NOT change key wireless, he remained at 16 characters, just the level of security! It seems if I want my Envy NEW 4500 with UPDATE drivers on my wireless network, I have to REDUCE my password security, which comes by default with modems cable new with Cisco, and accept the WPA! The strange thing is my old Iphone 4 and my old Apple TV both connected without problem. Therefore more recent Iphone to my wife 5 c and our newest Samsung UHD TV. So why a NEW model of printer is sold in stores right now, not able to work on WPA2? I lost 2 weeks on this issue before the sort it! It works, but I'm not happy! Same HP UK failed to connect after 4 hours on their online chat and remote assistance online! I worked it out myself from the comment by BH! Thanks BH. HP POST PLEASE A REPLY ON THIS THREAD WHEN YOU FINALLY WRITE A SOFTWARE FOR YOUR PRINTER TO WORK ON WPA2. MAYBE YOU CAN EMAIL CISCO IN ORDER TO WORK OUT HOW TO DO THIS BETWEEN YOU.

• HP Envy 4500 series: printers has been removed

  Help, please! I accidentally reset my settings to the printer when you try to restart my printer because it was frozen. I tried to reinstall the printer several times but failed. When I'm in the printers option in my settings, I tried clicking on the button "+" to add my printer, but have been unable to get it to connect. It is completely wireless and I can not get the printer to appear in any screen. When I got to my printer a few months ago, my computer basically put it all for me. No cables needed. I desperately need help my printer because I am a graduate student and need to print almost every day. Any help would be wonderful I've exhausted all possible ideas I have.

  Thank you!

  Hello @kkall,

  Welcome to the Forums of HP Support!
  
  I would like to help you today with the addition of your wireless HP ENVY 4500 e-all-in-one printer on your computer Mac OS X 10.10. I understand that everything has started when you accidentally reset your printer settings. Therefore, I will start by ensuring that your printer is always connected wireless. Once we determine if the printer is on the network and 'talk' wireless with your Mac, you should be able to (+) add your printer back in. Please follow the steps below.

  Step 1: Check of connectivity:

  1. On your printer, down arrow until see you Wireless
  2. Select OK in the wireless
  3. Select Wireless details and click OK
  4. Make a note of the IP address that appears
  5. On your Mac, open your internet browser
  6. In the address bar type the IP (omit for www.)
  7. Search this site
  • Opens a Web site for your printer: If means that your printer and your computer "speak" wireless. Please proceed to step 4 below.
  • If a Web site for your printer does not open: This means that your printer and your computer communicate wirelessly. This would result in your Mac not to 'see' the printer (+) Add again. In addition, If none displays IP address on the printer, which means that the printer is is more connected to your wireless network. Please follow the steps below.

  Step 2: Run the Setup wireless Assistant:

  1. On the front panel of your printer, down arrow for the Wireless option
  2. Click OK
  3. Select the wireless configuration wizard , and then click OK
  4. When you are prompted to choose your network name SSID
  5. Fill in your password (key) wireless. It is case sensitive.
  6. Once the wireless is connected successfully, check the IP address of the printer
  7. Now, on your Mac take the IP address and enter it in the address bar of your internet browser
  8. Search this site
  • If the Web site for your printer opens: The printer and the computer are now 'talk' wireless. Please proceed to step 4 below.
  • If the Web site for your printer does not open: The printer and the computer are not 'talk' wireless. Please proceed to the next step.

  Step 3: Powercycle network:

  1. Start by unplugging the power cable to your router
  2. Once your router is unplugged, turn your printer off
  3. Then, shut down your computer
  4. After 30 seconds to 1 minute, reconnect your router back in
  5. Then, turn on your printer
  6. Turn on the computer

  After a few minutes the internet connection will be back. On your computer to access a few sites test Web to verify that the internet is running correctly. Once the internet works again check again the IP address of your printer. Try to open the site on your Mac printers again using the printers IP address.

  Once you are able to open to the site of printers successfully, proceed to the next step.

  Step 4: Add your printer:

  1. click on the menu of Apple , then Preferences System.

  2. click on Print & Scan

  3. click on the plus sign , click Add a printer or a Scanner, click the name of your printer

  4. click on the area of use or with the help of Print and then select the name of your printer on the shortcut menu. Ensure that the driver HP Envy is.

  

  5. click Add to add the printer to the list.

  -Source

  Now that your printer is added, please try printing again.

  Please reply to this message with the result of your troubleshooting. Good luck!

• HP ENVY 4500 SERIES: my printer does not print words

  each document I try to print from my laptop missing every word so that it is a blank status report also every word Miss page.the and other printable pages of the printer itself.

  Hey @azs1500,

  Welcome to the Forum from HP Support.

  I understand you have a print quality problem when you use your HP ENVY 4500 e-all-in-one printer.  I want to help you with this.

  In addition to the obvious problem, the printer is able to print other types of documents, such as pictures?  Alternatively, are you able to make the copy of the façade?  What operating system work?

  I found a HP article which may help you to improve your print quality.  Click here and work your way through the recommended solutions.  Please let me know the result of your troubleshooting by responding to this post.  If I helped you to solve the problem, feel free to give me a virtual h.o.t. by clicking the "Thumbs Up" icon below and by clicking to accept this solution.

  Thanks for posting in the Forum from HP Support.  Have a great day!