HP ENVY 5830 HDMI / DVI and external monitor not detected

Similar Questions

• Tecra A2: Question about DVI and external monitor

  Hello
  I am trying to get a DVI Signal of the Tecra A2 using the Advanced Port Replicator III but without success. The A2 does support DVI anyway?
  Another question: is it possible to set up the main display to the external monitor using "extended Desktop"?

  Thank you
  Ralph Menon

  Hello Ralph

  Your unit doesn t support DVI port and you can't use it. As far as I know just the ports that you can find on the device, you can use in Port Replicator because the signal is just loop through.

  The problem with the screen is that mobile has the main value and it cannot be changed (on my Tecra M1 nor). The windows will be implemented on an external but password box will always be displayed on the screen of the laptop.

  Good bye

• Connectors HDMI, DVI and DisplayPort on the video card, do I need a special DP to DVI connector?

  HPE H8 1280t HDMI, DVI and DisplayPort on the graphics card.  I want to connect 3 monitors HP,

  1 do I need a DisplayPort to DVI cable do

  2. do I need a special DP to DVI cable, or will be a lot of work.

  3. is there another way to do it?

  Hello

  DP and DVI ports using digital signals, no conversion needed, so you only need something like one of them:

  http://www.shopbot.com.au/DisplayPort-to-DVI-cable/price/Australia/320660

  Kind regards.

• HP Pavilion a6750f: problem dual monitor (Second monitor not detected in DVI input)

  Hello everyone, I'm going to by a problem of not being able to setp toward the top of my second monitor.

  I own a HP Pavilion a6750f with an ATI Radeon HD 3200 card on board running on Windows 7 Ultimate 64 bit operating system.  In the back, I have two VGA and DVI inputs, VGA works, but when I connect the other monitor which is connected to a DVI adapter on the back, Windows does not detect any.

  I tried to go the DVI adapter to the other monitor and noticed that it refuses to work. I will note that my display drivers are all updated and I activated the option of customization to detect the second monitor, nothing shows up, it will not be the same acknolowdge that there are several screens.

  I think it's weird that I don't see this problem being issued when I was searching for a resolution on google for hours now. If someone can help me here please I would be very happy.

  Just to remind you try to connect a VGA (analog) monitor to a DVI - D (digital only) output on the computer. This is never going to work as analog and digital are two completely different incompatible signalling methods. With the help of an adapter DVI / VGA passive is the problem that these cards may work with DVI - I or DVI - A output... not DVI - D.

  Wikipedia - DVI;

  "More digital, the DVI connector includes pins that carry an analog signal compatible with RGBHV signals in a VGA connector. This allows a VGA monitor be connected to a passive adapter and offers a universal solution for the DVI interface. The analog pins are the four that surround the apartment or cross the blade as shown on the right side of the diagrams below. »

  

  8 analog vertical sync

  C1 - analog Red
  C2 - analog Green
  C3 - blue analog
  C4 - analog horizontal sync
  C5 - analog ground

  Note the absence of the pins on your computer and your so-called card C1, C2, C3 and C4. Without these pins is not just going to work. Still, there is no way to get an analog VGA monitor to work with your digital DVI - D only output using a so-called DVI - D to VGA. You may be able to buy an asset DVI - D to VGA Converter, but this will be expensive and cannot provide a poor video image quality.

  As you said, the HP f1703 monitor supports only VGA. However, based on the specifications, your HP w2207h 22 inch LCD monitor supports the entry to a VGA and a HDMI input. HDMI and DVI - D share the same signage and using a HDMI-DVI cable or adapter HDMI-DVI and HDMI Cable will solve your problem. For two monitors running on your computer, please connect as follows:

  Computer > HDMI-DVI cable or adapter HDMI-DVI and HDMI Cable > HP w2207h monitor

  Computer > VGA cable > HP f1703 monitor

  Please send Bravo

• MacBook 12 "and external monitors - experiences

  That I have not found much info on using a MacBook 12 "with external monitors (but have found problems), I thought I would post my experiences here for the benefit of other researchers:

  MacBook 12 "with Dell u3415w (3440 x 1440) via a USB - C adapter Digital AV Multiport (HDMI):

  VIDEO: Experienced random black screens on the external monitor. After update to El Capitan 10.11.4 version which included an update of the firmware of the adapter, the problem become constant, with the external screen crashing to black seconds nonstop. Switching the HDMI on the MHL port on the monitor completely solved this problem.

  VIDEO: I'm only able to get a resolution of 2560 x 1080 scaling to fill the screen, which is a little fuzzy but fine for office tasks - selection reduced 3440 x 1440 or "best resolution for this monitor" translates into a look, windowed 16:9, with black bars on the right and left. I have not yet found solution to reach ultra-wide 21:9 angle at the native resolution (but would appreciate a).

  VIDEO: Macbook 12 discs easily display 3440 x 1440 for tasks of office such as word processing and surfing. Video full HD YouTube is generally good, but gets now and then a little agitated.

  AUDIO: Holding Option and clicking on the speaker icon in the menu bar show selectable option for the audio output to the device (monitor). On this screen, it seems to be a problem of reception of the signal of the Macbook when another device is connected to another port. In my case, a PC connected to the DisplayPort would be "laundered" the audio signal of Mac but ONLY if the PC has been out audio through external speakers, not the monitor (a lot of trial and error to discover this. When the audio PC sent ONLY to the screen, the monitor then accept the audio signal of the Mac, too. But have an external speaker connected via a cable audio 3.5 mm to the pc mobo (taken minijack) would somehow replace the TWO PC and Mac audio signal to the monitor. Something to do through the DP connection maybe)

  with ASUS PB27Q (2560 x 1440) via an adapter, no problem.

  with ASUS PA328Q more ASUS PB287Q (3840 x 2160 or '4 K') using the same adapter. Cursor extremely lag/Office up to that you enable DP (Displayport) 1.2 through settings on the screen of the monitors. This allows the Macbook to drive a monitor 4K at 30 Hz, which is always a little laggy, but realistic enough to be productive for word processing, surfing, etc. Would not recommend a 4K monitor for Macbook 12 for a really "nice" experience until / unless that 60 Hz is an option.

  Hope someone finds this is useful.

  Mac Book 12 with external monitor Acer H277 Hu with Usb c

  random black screens

• Portege M400: Port Replicator support DVI and analog monitor

  Hello

  I use my Toshiba M400 in the duplicator.
  The duplicator has two outputs to a DVI and an external analog output display.

  I would use both screens at the same time under Windows Vista RC1.
  The port replicator manual mentions that this should be possible depending on the connected computer.

  "According to the computer connected to the port replicator, you can connect external monitors to DVI port and the port external monitor and display on both screens at the same time."

  Someone he knows the M400 which supports? I only get the external DVI monitor or at work.
  (He used to work with my old others and this function was just great).

  A big thank you in advance.

  Rogier

  Hello

  I'm not sure but pretty sure you cannot connect two external displays at the same time due to the restriction of graphics card for laptop to 100%. You can stretch relative to your office for two screens (one internal and external) or have the same image on laptop LCD and external TFT connected DVI or RGB port.

  If I read the sentence you have posted I realized you can use two ports (according to specifications) and use two screens on the same time screens (laptop screen and an external).

  All available modes to switch the display to the external one, you can check with the combination of keys FN + F5 or in change of display tab tool mobile extension of Toshiba Service.

• HP Envy m7-n011dx: HP Envy m7-n011dx - change to external monitor Sleep Mode close lid so that the aid & external keyboard

  I added an external keyboard and an external monitor to my HP Envy laptop m7-n011dx.  Both are recognized by the laptop, if I leave the lid open.  When I close the lid, the computer goes into mode 'sleep', and I can't use the laptop with the keyboard and the monitor.

  How do I charge the laptop does not go in mode 'sleep' when I close the lid, so I can use the keyboard and the monitor?

  Thank you very much!

  MPBEqual

  Hi @MPBEqual,

  Welcome to the HP Forums!

  I read your post and wanted to help.

  I understand that you want to use the external keyboard and the monitor while the laptop lid is closed.

  You must go to the Power Options. Set it to do nothing when the lid is closed.

  You can view this document in order to manage power options:

  HP Notebook PC - management Power Options (Windows 10)

  Thank you for being a part of the community of HP. Please let me know if that helps solve the problem by marking this message as "accept as a Solution. If you need more assistance let me know and I will gladly do whatever I can to help. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me congratulations.

  Kind regards

• Satellite L650 - HDMI connection for external monitor

  I've linked the laptop to my Sony LCD TV via HDMI, no problem. I have a (Acer, 24-inch) LCD monitor that has a HDMI port also. I used it to play ps3 and xbox360 via HDMI connection, no problem. I have two lines HDMI 1.3. The two lines are working without any problems.

  However, when I connect my laptop to my LCD Acer just external LCD monitor can t work properly. I can barely see what is display on the monitor, very snowy. It's hard to describe. I took a photo but don't know where to download it here.

  I tried both HDMI lines, but both failed. I tried to change a few settings in the laptop, but nothing makes any difference. I'm looking for the driver for video card on the Web from Toshiba website and found that my current license is updated.

  I'm not a tech geek, but I think that I don't know something on the computer. Am I missing something here?

  Guys (and girls), please throw in an idea (tooth tell me to check if the connection is good, I don't already).
  Thank you

  Hey,.

  If you connect your laptop to external monitor and press the FN + F5 key combination what happens exactly? Pressing the FN + F5 key combination shows different options and you should test with external monitor only (not the clone image). If you work on external monitor doesn't do this work?

  In addition, you must connect the devices before starting their.

  Also, take a look in the BIOS and try to load the default settings. Make sure that that the HDMI cable is connected before starting Windows and check the status again.

  By the way: what operating system are you using exactly?

• Connection ethernet and external monitor

  Is it possible to connect an ethernet cable and a VGA adapter to a MAC AIR at the same time?  I use my crush on internet in my school and I would like to use an external monitor at the same time.

  There are two options: a dear TB hub that allows you to add additional ports or a USB Ethernet adapter. The USB adapter will be slower, but depending on the speed of your school's network you may not notice a difference.

• Tecra A10 - BSOD with Port Replicator Port and external monitor

  Hello

  I have a Tecra A10 PTSB0A 05C023 with XP SP3 on an Express Port Replicator, running to an external monitor (1280 x 1024) on VGA. Works fine for a while then seems BSOD spontaneously when not in service - possibly when screensaver or powersaver comes into play.

  BSOD is a STOP 0x0000007E in igxpmp32.sys

  I downloaded and installed the latest video drivers intel from the Web from Toshiba - 6.14.10.4953 site

  Any help or advice by eliminating the BSOD would be greatly appreciated.

  Kind regards

  Rhys.

  Hi mate,

  I asked Google to igxpmp32.sys and this file belongs to the Intel display driver. In your case, I recommend the page Intel searching for the latest display drivers.
  [www.intel.com]

  Also have a look on the Toshiba site for a BIOS update, or you have already installed the latest version of the BIOS?

  In addition, it would be interesting to know what Port Replicator you use exactly. Can you post the model number?

• Portege M800 and external monitor Dynadock question

  I have a M800 connected to a U Dynadock docking station.
  I have problems when I try and put my external monitor as the primary device and have the cell phone as the extension to monitor.

  I am running Windows XP.

  Are the only options it will allow: Clone, Extended (laptop is main and external is the extended option)

  If I use the WIndows graphic option it does not put the external monitor as the main display (I check this option and click on apply and it remains unchecked)

  If someone could help that would be great.
  Otherwise, I would recommend is not to use the dynadock

  Sorry mate but I still don t understand what you are talking about what problem do you have?

  Is the Dynadock video drivers give you the ability to view a total of three screens.
  -L' screen of the laptop.
  -external monitor connected to the video port on the laptop (if available)
  -ewxternal monitor connected to the Dynadock

  In addition, you can use mirror Mode and Extended Mode.

  Mirror Mode creates an identical view between your computer screen and the external monitor
  Extended mode extended Mode lets you split your display on multiple monitors.

  These are the features that you can use with Dynadock

• Satellite U300-113 and external monitor use

  I have, what I thought until very recently, a very simple need: I would like to connect an external monitor on my laptop, but on the continuation of the investigation things seem much more complicated about resolutions natives and elongation.
  Is there anyone who could recommend an acceptable quality monitor that is proven to work?

  I think that you should check the resolutions supported for external monitors and I think you can find answer in user manual s on page 119. To have a perfect image on external screen, you should buy external display with a native resolution listed in the table of user s manuals.

  Also talk to your local dealer. Perhaps you can test the functionality in the store before buy you.

• EliteBook 8460p and external monitor/projector does not work

  We have several 8460 with the same question.

  They work fine until you try to connect to an external monitor/TV/projector and then the trouble begins.

  When you use Fn + F4 to establish a dual monitor output the external monitor and integrated display switches between the two, as if the PC cannot determine the display to use. On rare occasions, it works but it is not reliable. I ve it first met on a fair and when I tried it before the session, it worked fine. During the session it just started this behavior. I took it out and replaced the graphics drivers, BIOS and made sure that the resolution was not the issue. It worked fine and I returned it to the room of the lesson and he did it again.

  I started to believe that the projector was the wrong part here, so I didn't want to use the PC again on this fair, but no other computer shows no signs of distress.

  Since then, it was at the beginning of this spring, I ve seen and experienced the same problem with several computers of the same type and with different monitor and they all behave in the same way.

  I have spent some time now and searched the web but found nothing I ve doesn't explain anything around it and so far no update driver, and no other updates (including a full installation) has solved this problem.

  There are the HP Elitebook 8460p with AMD graphics card in the computer.

  There is no any other indication that something isn't going to the newspaper or whatever it is.

  Any suggestion of what may be the cause of this is useful.

  Hello and thanks for the reply.

  The original problem is old, from 2012, in fact and more or less no longer applies. Some of the more troublesome computers has been replaced with other models at the time and the 8460 p is used more or less entirely users who do not have the need for external screens.

  Have not seen it since a long time but we've updated the BIOS and drivers a couple of times so the current status is in fact "stable".

  Thus, we can say that the problem is not more, but whatever solved the problem is unknown.

• Using the function tablet and external monitor at the same time

  Hello

  I was hoping with the docking station and the external monitor, I can work as with an ordinary computer and at the same time to use the computer screen Tablet laptop to take notes with Journal (extended desktop display).

  Unfortunately, when I touch the screen with the stylus, it is still planned for the external monitor - no matter what I set as main display it seems just really stupid.

  Does anyone have an idea how to prevent this?

  divB

  I've updated to the latest official drivers from the Wacom homepage (not Lenovo-, they are old!) and it seems to work!

  I hope he'll stay until now.

• Problems with my slower... graphic AGA and external monitor does not display

  First of all, let me say that I am not computer savy.  I just bought an Alienware 17 June 1.  Got my AGA and installed a Geoforce GTX 980 inside graphics card.  First I tried as far as I know (which is not yet much about computers) to connect an external monitor to the AGM.  For some reason that the monitor does not display anything and my laptop States there is not all the other monitors it can detect.  Now, the other problem I have is that I run games using my AGA and when its connected I can really see my games download restless and slower.  I thought that the whole purpose of the AGM was pushed my graphics and do amazing things... not very frustrating.  Any suggestions on what I might hurt?

  Try the following:

  Disconnect the graph.

  Uninstall the video card drivers.

  Install the following driver (this version is not in the official Dell support website again, however, it has been tested by our engineers)

  Restart the system and connect the graphic amplifier and test it.

  Please let me know if this helps you solve the problem.