HP envy 700-210xt 8.1 windows update windows PC bsod crash

Similar Questions

• HP ENVY 700-210xt: how to reinstall after upgrade windows 10

  I bought a HP ENVY 700 - 210xt delivered with Windows 8.1 and included a recovery for the same partition.  At one point last year, I used the free update of Microsoft to take the system up to 10 Windows.  As far as I know, it has no effect on the recovery partition.  Now, I met a hard drive problem, where the system will not start or recover.  My hypothesis is that I need to reinstall from scratch, but I have some problems.

  • If I order the HP recovery discs, they will be for Windows 8.1, but not my upgrade to Windows 10 invalidated the original license key?
  • If I get somehow 8.1 Windows reinstalled with the original key, can I still the free update me for Windows 10 of Microsoft?  I guess that their records show that I've already updated.
  • If I can't get this path to work, is there a direct way to return to Windows 10?  As part of the upgrade, I've never seen a new license key, but maybe it was and I never saw him.

  Thanks for any help!

  -Josh

  joshjohnson72 wrote:
  

  Just bought a new drive and ran into another issue.  I thought it would be a good opportunity to upgrade to an SSD, but once I turned on the computer, I noticed that the hard drive carrier is set only to contain your disks 3.5 ".  I guess that there is some sort of adapter for drives 2.5 "sled, but I'm not finding anything.

  You need a support SSD (like this) so he can climb properly.  I also was called to tie an SSD in the case from time to time... since it has no moving parts and is not fragile like hard drives disk.

• How to configure HP ENVY 700 - 210xt to install the graphics card EVGA 650 TI boost.

  Can someone tell me how to install the graphics card EVGA 650 TI boost in the

  HP ENVY 700-210xt

  Product number: E9G99AV

  I replaced the power supply with Corsair RM 650 watt power supply that works very well. Now, I want to go to the graphics card EVGA 650 TI boost. Except, I can't get the driver to load with period of installed equipment. When I put the card into the PCI 16 x slot the computer starts with a blank screen. I pass the DVI video port old computer and the new port card white screen of same at startup. If I turn the PCIe port disabled in BIOS, it starts with the embedded video, but same thing impossible to load drivers that are not able to locate the new video card hardware. Makes me crazy! I don't know that I don't know how to configure the Bios correctly or something. Can anyone help?

  Hello:

  Please see my response to your other post on the link below.

  http://h30434.www3.HP.com/T5/desktop-hardware/how-to-configure-to-install-EVGA-650-TI-boost-video-car-in/m-p/3117171#M71438

• How to disable the onboard video HP ENVY 700-210xt.

  I try to install the card EVGA 650 TI boost.  How to disable integrated video.

  Product HP ENVY 700-210xt number: E9G99AV.

  There the

  This was the solution: http://support.hp.com/us-en/document/c03653200

• HP ENVY 700-029eb desktop PC. Update to Windows not sure 8.1?

  Hello world

  HP ENVY 700-029eb-computer for office
  Model: E3H39EA

  Windows 8

  A question related to the following message on my HP computer:
  -----------------------------
  HP has not tested this PC with Windows 8.1
  For this reason, HP is unable to update providence instructions or Windows 8.1 drivers.
  You can now lose stability and basic functionality if you try to update your system.
  -----------------------------

  A Windows 8.1 update could make the System unstable, so the message of HP.

  But my computer is always busy preparing the update and guard asks me to do the 8.1 update.

  So can I install Windows 8.1 safely on this computer? Or how to turn off the update?

  We appreciate your comments and advice.

  GuyterB1964, welcome to the forum.

  I do not understand these messages.  Here is the download page for software and driver for the computer.  As you can see, all the drivers for win 8.1 are listed.  They would not list them as much as they have not been tested.  I see no reason not to do the update.

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

• HP ENVY 700-049 will be not updated to Windows 8.1 - 0xC1900101 - 0 x 20018

  I recently bought a HP Envy, office 700-049 and have updated to the most recent Windows 8.  I re-downloaded and installed all the drivers for Windows 8 listed on the support page.  I disabled the LAN wireless in Windows (no way to do it in the BIOS I can say).  After that, I went to the App Store Windows and ran the 8.1 update.  The machine restarts and begins to set up the devices, but stops before the end with the SYSTEM_THREAD EXCEPTION NOT_HANDLED error.

  On reboot I give myself

  0xC1900101 - 0 x 30018

  It appears in Google... and I tried common recommendations (install updates, install the latest driver, disable WLAN)... y at - it additional suggestions or I'll just have to hang tight on MS to fix this?

  My wrist is tired of bouncing over the shortcut bar. :-)

  Kind regards

  -Tony

  Obviously, make sure you have the latest drivers and updates installed... but I managed to get through there.

  I'm pretty sure that the Ralink Wireless card is the culprit.

  In addition to the steps I have described here above I have disabled the integrated graphics card.  Also, I was going through a KVM.  I hooked the mouse, keyboard and monitor directly in... using the graphic adapter PCIx.   But I suspect that the following was "the miracle."

  I had a set of screwdrivers on a small scale and a pair of pliers and took the Ralink wireless out.  It's just "above" where is the PCIx graphic card.  This screw was really in there... Please be very careful not not to strip out.  Once the screw is out, it appears out of the slot.  I just hid it near bays of drive.

  With the offline wireless the 8.1 update succeeded.

  -Tony

• HP Envy 700-327C: upgrade to windows 10

  Windows 7 Pro (64) was preinstalled on my HP Envy.  It is configured to automatically install the Windows updates.  I have the app get Windows 10 and the icon appeared in my system tray indicating that I had booked the upgrade of the W10, but then he suddenly disappeared.  When I choose the upgrade of Windows in the list of programs all he used to reassure me that the upgrade of the W10 has been used, but now it's over.  The history of the update indicates that the upgrade to Windows 10 failed.  CIP 1 service is installed, and as far as I know, all the other critical windows updates.

  How can I upgrade to Windows 10?

  Hello

  July 29, 2015 is history now, do you still need this icon? Please go to the following link:

  https://www.Microsoft.com/en-us/software-download/Windows10

  Kind regards.

• HP ENVY 700-210 Desktop PC: Windows 10 improved rear output loss taken audio input on desktop HP Envy

  Beats and all software audio apps work fine after 10 window installed. but I lost out in all but one of my audio jacks back during playback using any audio application (Media Player, Cakewalk, etc.).  I went to manage audio devices on the control panel and to configure/test the speakers/headphones and I went out on the set of the back to my speakers during the test; but, not for playback of audio applications.

  I found a solution.  After the announcement of this question, I went through the different options for audio and put to update my sound driver.  Since I got a response from the Microsoft Community ( http://answers.microsoft.com ) forum which confirms this.

  > Go to Device Manager (press Windows + X, select Device Manager button.

  > Locate the audio adapter.  In my case, I had two entries for audio devices, "Audio inputs and outputs" and "audio, video, and game controllers.

  > I updated the driver for "IDT High Definition Audio CODEC" under "audio, video and game controllers".   It worked.

  > I had to reboot twice before it takes effect.

  > It seems that it is the same driver for 'Speakers/headphones' under ' Audio inputs and outputs.

  > Update drivers is reversible using the button "revert to the version.

• HP ENVY 700-305no desktop PC: Bios update failure.

  Long story short (a little).

  I got a virus, is a virus really means, crypt all my files, prevents the opening of antivirus programs and redirects the downloads.

  virus survives 3 reset factory, 3 hard drive formats, and a reinstall of Windows.

  This leads me to believe that he himself got into the Bios of my computer.

  so I downloaded the latest bios for my system, in this case

  Update the BIOS HP consumer desktop PC (SSID family ROM 2AF3)

  through the Setup program on another computer, I installed the update to the bios of my USB,

  inserted in my main pc, held down the Windows and key B, while starting my computer.

  This led beeps and my computer Wrooms, 10 minutes later, nothing happened.

  I decided to start the installer directly from inside infected computer, but this resulted in a failure too.

  say that the downloaded bios is not compatible.

  What I'm asking is how I should go about the removal of the old bios (possibly) infected and reinstall it again.

  I'm not aware of a way to Flash the BIOS in Ubuntu, but it might be possible if there is a wine app in the version you have.  I have not experienced or read where someone else tried it either.  You could ask for more in the Ubuntu forums.  Don't know if it is possible to WIN PE 3.0 either.

• HP Envy 700-311na upgrade to windows 7 missing drivers

  Please help I just bought a 700-311 desire and put windows 7 on it as we just couldn't pass to 8.1

  Now I have missing drivers and can not find them anywhere

  I need

  Ethernet controller driver

  PCI\VEN_10EC & DEV_8168 & SUBSYS_2AF3103C & REV_OC

  Network contoller driver

  PCI\VEN_8086 & DEV_08B1 & SUBSYS_40708086 & REV_9B

  They are necessary for the Professional on Windows 7 64 bit operating system please

  Hello:

  For the first hardware ID, download and install the driver for the second on the list.

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=13&pfid=5&level=5&Conn=4&DownTypeID=3&GETDOWN=false

  For the second, download and install the driver for the second on the list.

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?DwnldID=24217

  You will also need this bluetooth driver...

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?DwnldID=24189

• Add memory to HP ENVY 700-210xt 1.35v or 1.5V?

  I intend to add a second module of 8 GB of RAM, and see that the module is already installed by HP is a Hynix CL11 1.35v module.

  This motherboard supported 1.35v, or it delivers 1.5V independently?  So it is worth trying to find 1.35v RAM to match the existing RAM?   Which will help performance if the jury is really keep the tension?

  My understanding is that if I add a second module and it is 1.5V, then the memory will operate at 1.5V.  Probably not an issue since I don't plan to overclock the CPU.   But just check

  Thnaks for any advice.

  If the module of memory installed is a Hynix CL11 1.35v module, then you will need to find an absolutely identical memory module to update. Otherwise, you take a risk of your PC does not start after the POST (power on self test). If the MESSAGE fails while the PC does not start in Windows. Upgrade memory by matching the card can only be a financial bet.  

  If you are unable to find an identical memory module, then remove the installed module and install a pair of guaranteed compatible memory modules.  It is the only way to update without problem. Use of well-known brands such as Kingston, Crucial, Corsair.  Memory of well-known brand manufacturers guarantee that their modules will work as long as you use the memory configuration utilities to identify what will work in your PC.

• HP ENVY 700-349 Desktop PC: Windows 10 activation issues

  So, I have recently reinstalled windows 10 on my computer (from Windows 10 Windows 10 once again) and I wiped my HARD drive, so it can reformat properly for the installation of windows. After installation I then needed to reactivate my windows and putting in my product key after searching physically inside and everywhere in my computer I can't find any key to activate my windows licenses. (When I bought my computer there was windows 8 and then I upgraded to windows 10 free no problem) I'm currently sucks, thank you.

  Already activated my windows by contacting support, gave them my details and every thing is correct. For others who have this problem just pass the link https://partner.support.services.microsoft.com/en-gb/co... and select chat, tell him your story and it should be good!

• How to configure to install HP ENVY 700 - 210xt video car EVGA 650 it boost

  
  

  Hello:

  Please read the guide on the link below for what settings BIOS need to be changed when you install a video card no HP in a PC in Windows 8.

  http://support.HP.com/us-en/document/c03653200

• PC HP ENVY 700 series: 8.1 Windows reinstall required activation code

  How can I get an activation code for a reinstallation of windows 8.1?

  Fullon1100, welcome to the forum.

  Product key (activation code) to win 8.1 is embedded in the BIOS.  Therefore, you can use only the system recovery software to reinstall Win 8.1.

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

• Window 8 HP Envy 700 error on monitor

  Hello

  I am a newbie to forums so hope I'm doing this correctly.  I received a HP Envy 700-074 office with Windows 8 for a Christmas gift.  I took my old computer xp shop pc to transfer data and everything was fine until this morning.  I received the following message appears on the display: scanning and no VGA or DVI signal found then goes to "sleep".

  Help, please.  I'm so frustrated right now.   Husband and I are retired now.  He tried to reset factory settings monitor has pulled the plug of monitor power and held the power button

  for 60 seconds and back plugged in to the bottom.

  Yesterday, I remember turning off... .unchecking "Restart automatically" because of the guarded pc restart all since I got this new pc.

  Thanking you in advance for your help.

  Kathy

  Hi Kathy,

  Can you please check the following;

  (1) make sure that the computer is connected to the display with a VGA, DVI or HDMI cable...

  (2) make sure that the monitor and computer are powered...

  (3) make sure that the monitor and the computer has been turned on... you should have a light on both.

  Any number of things may happen and I want to be sure the computer is not stop or go to sleep. If please report back with your findings and let us know if the problem is solved or not.

  If you have any other questions, feel free to ask.

  Please click the White Star of KUDOS to show your appreciation