HP Envy: fingerprint digital

Similar Questions

• Tecra M10 - fingerprint digital software causing of logon box go weird

  Hello

  Can someone help me pls.
  I have Tecra M10 and trying to install Fingerprint Digital sw (FPSW_V25290_090424) it works fine.
  However when I mapp network drives and the name of user and password box appears the box seems odd.
  For example, the OK button would have a blue ring dark around him, the curson in the password box does not sit inside the area.

  I have a screenshot, but how to download it here?

  I managed to find out what the problem was, it; s the add-on Bank password that was the cause. Removed from this add-on in the facility and he was gone.

• failed to check SSL for 'ip' due to incompatibility of fingerprint digital host.

  Hello.

  Have a big problem with vSphere client

  Today I press the SSL certificate claire button in IE on my Windows 7 OS

  Then I faced with strange problem

  I'm trying to connect to the console vm (connected to vCenter client) and I got an error failed to check ssl for 'ip' due to incompatibility of fingerprint digital host.

  It happened again, so I try to connect directly to ESXI

  version 5.0, ESXi, vCenter 5.0

  What I tried to do - turn off SSL ignorer ignore by regedit, reinstall the vSphere client - there is not a problem

  I'm still not able to connect to any VM console

  I am trying to connect from websphere - no chance, the same error

  Then I install the client on a different machine - everything works ok

  Then... If you want to do something just do it yourself.

  I have a similar problem to the one described in this blog http://blog.isaacblum.com/2012/08/01/kaspersky-anti-virus-vmware-esxvmware-vsphere-client-osx/

  But quite different - program called lock cause this error.

  By default, then you install the vi client first, you need to install VMware deafult h99350.

  And in my case this certificate issued not VMware but locking O_O - (actually this programm remind me virus powerful-great damage, of little use)

  I disable the locking device, Kaspersky and now - install succefull!

• Will not work HP TouchSmart 15-j078ca n ENVY: fingerprint - no lights reader...

  Hello

  Since the replacement of hard disk and reinstall all my fingerprint reader used to light up.

  HP TouchSmart PC ENVY 15-j078ca laptop

  Update driver,

  simplepass update software

  BIOS shows biometric not like option, thinking about this issue perhaps?

  Cannot use HP to check and update because it seems to not be able to rip off my laptop once its identified it!

  Thank you

  @BCBuddy

  The "Scan my PC" program may not work for you, no, I do not know exactly why; Suffice it to say if the program does not scan your PC to find your drivers / support page, you can perform the operation manually, that is, access your computer Support pages.

  Computer:

  HP TouchSmart PC ENVY 15-j078ca laptop

  A few ideas

  There is not a Windows 10 associates BIOS update for your laptop.  I doubt, there is nothing to change (in BIOS), except if you need get the BIOS to default because it has been changed at some point.

  In some weird cases, BIOMETRICS must be enabled in Windows 10; It is primarily a problem unless something hinky, AND you run Windows 10 Pro.  The document below covers a little of this - ignore the idea for now.

  There is not a Windows Validity Sensor 10 / fingerprints Synaptics driver.  The listed pilot is evaluated for Windows 8.1 and should suffice or Windows 10.

  File name: sp63418.exe

• HP envy: fingerprint reader does not

  the fingerprint reader doesn't work with my

  ENVY of HP TouchSmart m7-j120dx Notebook PC (ENERGY STAR)

  Model #: E8A11UA

  Series No.: [personal information]

  I downloaded the software but still does not

  @mackt123

  The good news: there are 10 HP Windows drivers for your system.  (It is not the case for everyone.)

  If the system has been migrated to Windows 10 (as opposed to the installed computer with W10), while you have installed HP 10 Windows drivers, including the Chipset driver.

  There is an update to the BIOS of your system - which do not install unless you have your computer completely saved, particularly files all critical.  Do not update the BIOS unless / until it's absolutely necessary.  Why hesitate?  BIOS updates may be very beneficial--or they can turn fatal and turn your computer into a large, flat paper weight.

  

  Validity sensor driver:

  File name: sp63418.exe

• Pavilion dm4-1160us, fingerprint digital driver/software for windows8

  Hello

  I have a Pavilion dm4-1160us. Since I upgraded to windows7 for windows8, fingerprint reader refused to work.

  Please, what can I do to fix this?

  Is there a driver/software that I need to get to make it work with my new windows8?

  Thank you.

  Hello

  First download and install the driver prints digital validity of here (worm 4.1.139, driver Installer see 2.1.0.2).

  Then download HP SimplePass Identity Protection worm 7.1.5.9 here

• request to connect the fingerprint reader fingerprint digital persona

  Product name-pavilion dv4 1411TU

  Operating system-windows 7

  I upgraded from windows vista to windows 7.

  Now when I tried to use app digital persona. It is required to connect the fingerprint from the recovery disk reader, but I don't have a recovery disk.

  Help me please if anyone can.

  In my first post, I linked to a fingerprint reader driver.  I included the link in the word "here".  What I am asking is for you to run this installation for the driver and let me know what happens with it.  I am sure that the pilot when it was originally installed does not for some reason any and that one of the strangers/other devices is the fingerprint reader.  As the status message on other devices, the drivers for them are not installed.  If one of them is the fingerprint reader, then by installing the driver that I linked should restore the fingerprint reader.

  Here's the direct link for your convenience.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-75356-1&cc=us&DLC=en&LC=en&OS=4063&product=3994763&sw_lang=

  Let me know what happens.

• HP dv6 Notebook PC ENVY: fingerprint reader

  Product number: E3Z70EA #ABV

  I did a complete reinstall of Windows 10 and all drivers are installed. I find the biometric Driver for Validity Sensor in the driver manager.

  Please note that this is a clean installation and not an upgrade.

  Whenever I try to configure the fingerprint using Windows Hello I get an error.

  Click on setup under Print Fringer > success

  Click Start > success

  Enter the Pin code > success

  Scan of my finger on the finger print scanner > error: Sorry, something went wrong close Windows Hello, and then try again to go through the installation program.

  I tried the above steps many times and always face the same problem.

  Valid Driver Version: 4.4.234.0

  Hi @VishalPinto,

  Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!

  I stumbled upon your post on the laptop and wanted to help you! I looked in your question on your HP ENVY laptop dv6-7350se and have them with software for Windows 10 fingerprint reader. Here is a download for the reader of fingerprints for Windows 10. This download sp71729.exe should work for you. I would like to uninstall the version you have and reinstall this version.

  You may need to check that the Simplepass is enable biometric support .

  Please let me know how it goes.

  Thank you.

• Need to Win 64-bit XP to fingerprints digital and modem driver for Tecra A9-s9016x

  I installed a Windows XP x 64 system in a Tecra A9-s9016x model and I can't get the fingerprint and intall correctly for modem drivers.
  I need these two pilots and were unable to bring them into the Toshiba support page.

  Any ideas where I can get the drivers?

  You won't find these drivers.

  The 64-bit of Windows XP was not so popular like Win XP 32 bit and the drivers have not been released by Toshiba.
  In some cases, the 32-bit drivers running on 64 bit OS, but if you have already tried to install Win XP32bit driver and if it didn't work then I doubt that your will be able to get this running devices.

• SOS - system froze because of attempt to bypass the fingerprint digital/Admin login

  Here's what I tried, according to the instructions on About.com

  Start run
  Control userpasswords2
  Ok
  entered the Admin username / password
  apply
  Ok

  I also chose to reset my password & I typed my own password, then confirmed by having to retype.
  It was after this, that my system froze at this point during the boot:

  WINDOWS STARTUP

  (after which the system remains frozen at that time here.
  I had to remove the battery - not only the AC. Nothing else has worked to close the screen.

  I'm a cold sweat not knowing what to do!

  I'm now back on my computer laptop 12 "tiny which is full of Trojan horses, for this type.

  OK, I solved my problem where even the ridiculous screen fingerprint + Admin has become provide, and start going directly on my desk (I want it).

  Here's what I did (more or less):

  Each time screen went dark during the boot, I clicked F8.

  Then choose Win - XP.

  The first time, it did not list which included "Last good known config."

  But once I tried it, finally to display the list.

  So I finally had to click on "Last know good configuration."

  Of the process of restoration of the system (start, programs, accessories, tools)

  .. .without April 27 date to restore my system to- BUT THIS TURNS OUT TO BE for NOTHING

  .. .whereupon he TRIED to restart for April 27, configuration

  HOWEVER:

  Then I heard this same heart-sinking beep, I had heard these days

  ... whereupon:

  2 boxes of dialog as follows:

  1 dialog box:

  Windows logon

  Gray:

  ... the username: Admin... Password: @.

  2nd dialog box:

  The system could not log. Make sure your username and domain are correct, then type your password again.

  And then the stupid ADMIN-chess-pieces clickable icon displayed

  .. then I clicked it

  What:

  RESTORATION INCOMPLETE

  Your computer cannot be restored Wednesday, April 27. No changes have been made to your computer.

  But then, when you click OK, the desktop appears.

  So I said - that the heck - I'll go to:

  ... CONTROL PANEL, USER ACCOUNTS

  .. .once here, I chose 'change password '.

  .. then typed the password I had used during password reset fatal

  ... VOILA! for some reason which I can't understand, I am up & running

  (because not only it starts now OK,

  .. but the icing on cake, it's he doesn't now know this absurd of fingerprints fingerprints-admin. screen

• HP envy: HP Envy fingerprint reader does not

  Simple pass works well using the password or PIN.  The fingerprint reader does not work. no light help please

  icp_wolverine wrote:

  MAKE SURE THAT THE ATOMIADES SENSOR IS INSTALLED AND REINSTALL HP SIMPLEPASS

  ALSO TRY A HARD RESET IF A STOP OF THE LAPTOP, UNPLUG POWER SUPPLY, BATTERY, BUTTON FOR 10 SECONDS TO TAKE... BATTERY PUT IN PLUG POWER CORD BACK LIGHTS FOR LAPTOP

  Please how do I check if the sensor is installed.  I tried the Hard reset without success. Thank you

• I recently updated my fingerprint scanner fingerprint digital persona and it stop working.

  Updated my fingerprint reader and it became dysfunctional, followed their instructions to mitigate the problem, but I don't have the disk to re - install the fingerprint reader, so I wonder if there is a way to do it without the disk?

  Hello

  ·         What is the brand and model of the computer?

  If your fingerprint reader does not work, an application or an updated driver may be available for download from the centre for maintenance or updating Windows.

  For more information about Action Center, see what is Action Center?

  For more information about Windows Update, see Windows Installer in Windows 7 updates.

  If you are not able to find a driver using Action Center or Windows update, you should contact your computer or the manufacturer of the fingerprint reader for drivers that are compatible with this version of Windows.

• HP ENVY 5660: Digital Photo cancelled Mid-printing

  I got this HP Envy 5660 for a month now without any problems.  So far, I had no problem printing of photos, but now whenever I print a photo 4 x 6, the printer will get to the final inch or so of photo paper and then cancel the print.  The touchscreen little actually say "Printing cancelled" and the last inch of my picture is not printed.

  I tried all the reset of the printer plant and withdrawal/reinstally driver.  This is only a problem when printing pictures of one of my PC under Windows 7.  If I place a photo on the scanner and re - print a photo, the entire photo is printed without any problems.

  Well, I don't know how, but I seem to have solved the problem.  I have uninstalled/reinstalled the drivers twice and things were still screwed up.  Finally, I have uninstalled something with "HP" in the name, deleted all trace of the files/folders with "CV" in them in and checked to make sure that all the printer drivers have been removed under the print management console.

  Except, this time I chose to install the base instead of the «full features» driver driver

  I seem to be able to print photos correctly again.

• Turn the use of fingerprints digital power easily

  X201s

  Windows 7

  Fingerprint logon (normally) works well for me, but... I want to have the following:

  1. When you travel - logon requires fingerprint or password.

  2. where the House - automatic logon without security.

  Is there a quick and easy way to enable security on and outside?

  What I see, to remove and re-registration of fingerprints and Windows password whenever I have change from one to the other.  I would be very happy to be wrong.

  in the Panel, should be a fingerprint software thinkvantage fingerprint.  open it.  Choose settings.  Uncheck the box "use the fingerprint instead of the password".

  the password is another story.  to use the footprint or the password, or like you said to delete the password. at least, you don't have to re-register fingerprints.

• driver fingerprint digital digital persona

  HP dv7-1016nr model. software Persona is 4.11.3826. message says not connected reader. need windows 7 driver / upgraded the other days of vista – worked fine then - help. ironhead111

  Hello

  The version windows 7 driver you need is on the link below.

  Validity sensor driver - Windows 7

  Kind regards

  DP - K