Tecra M10 - fingerprint digital software causing of logon box go weird

Similar Questions

• Tecra M10 - 10i: Abstract error caused by pwdbank.exe

  Tecra M10 - 10i, as random instances of the error message, 'Abstract error' box.
  Endless loop on the repeated screen boxes indefintitely.

  Kill pwdbank.exe process stops, it continues, but then the appliction Truesuite detects then password entry existing possibilities on the web pages for the finger printing software if pwdbank.exe killed.
  What happens on other models of laptops Toshiba with Truesuite running.

  The Truesuite application uninstall and install the new version of 2.5.28.0 (below) IS NOT the problem.

  Link: [http://uk.computers.toshiba-europe.com/innovation/download_driver_details.jsp?ID=66402&OSID=26&OSBUI LD = 6001 & OSBITSIZE = 32 & driverLanguage = 42 & SOURCE = TEMP RO & LNG = 1 & VERSION = V2.0]

  The problem seems to occur to me when I run Onenote 2007 - part of Microsoft office 2007

  Toshiba responds to this?

  Hello

  Maybe this can help - http://aps2.toshiba-tro.de/kb0/TSB9702NP0000R01.htm

  Good bye

• Scan fingerprinting - and Tecra M10 notebook computer does not properly

  Hello

  We got a Tecra M10 notebook and its fingerprint reader is not working properly and I tried all kinds of things to make it work but not joy.

  Can I know how can I claim the warranty, and how to contact Toshiba service provider because I can't find the coordinates of the Toshiba warranty service?

  Don

  Hello Don

  Before contacting service install OS using Toshiba Recovery CD/DVDs. With digital fingerprints factory settings scan and preinstalled software should work correctly.

  Otherwise, you can contact the nearest Toshiba authorized service provider and ask for help. They check the functionality. Addresses and phone numbers, you will find under http://eu.computers.toshiba-europe.com > support & downloads > find an ASP.

  Good luck.

• Fingerprint reader software Digital Persona does not work in my hp Pavilion Dv4-1235ee

  After the upgrade from vista home premium to Windows 8 32-bit. the Digital Persona fingerprint reader software does not work please help me

  Please use 'HP SimplePass Identity Protection 2011 software' which can be downloaded from the following link:
  http://ftp.HP.com/pub/SoftPaq/sp58501-59000/sp58540.exe

  Here is the link that explains how "install and use the 2011 SimplePass fingerprint reader:
  http://support.HP.com/us-en/document/c02946451

• Cannot use scanner on my Tecra M10 finger print

  Hi all

  I have a toshiba tecra M10 PTMB1E laptop with fingerprint reader. IM on windows 7. now the problem I have is that I can't find any application program to run the fingerprint software? ive tried various software downloads of fingerprints on the toshiba site, but nothing works? If I check the devices drivers for the scanner are installed properly. If I type fingerprint in the box of files of research program, he is back with the following

  use your fingerprint with windows
  stop using your fingerprint with windows
  Maintain your fingerprint data
  Remove your fingerprints data
  biometric devices
  change the biometric parameters

  If I click on the first option, it takes me to an authentec page that says under construction? as if I'm going in "manage your fingerprint data?

  I can turn power biometrics, but nothing happens to start up, which allows me to use my fingerprints?

  If I go to the peripheral page biometric in the hardware section it says im not registered? If I click the link highlighted blue 'use your fingerprint with windows' it only take back me to this page of AUTHENTEC .com? and all that is under construction with different links page?

  scanners still used these laptops with windows more? or sector support windows?

  Hello

  On the page of the Toshiba UE driver you can find the fingerprint software and uninstall of fingerprints (this tool is needed to remove the fingerprint reader software)

  You need the software of fingerprint...
  ... more I recommend checking this docuemtn Toshiab concerning the use of the fingerprints:
  http://forums.Toshiba.com/T5/General...Ty/Ta-p/347084

  https://support.Toshiba.com/support/...tentId=3368363

• Tecra M10 - stuck - CTRL key question may be to do with the BIOS?

  Hello and thanks for reading.

  I recently changed my Tecra M10 to Windows 7 (from XP), and it quickly developed the dreaded question-button stuck CTRL This causes the keyboard behaves as if the CTRL key is pressed continuously. Sometimes reaching a key combination, or bring up the on-screen keyboard, temporarily solves the problem, but he returned.

  It seems to be a problem that many people have no simple solution. I watched each thread that I find and tried a lot of things to do with drivers etc without success.

  So first of all, if anyone knows a remedy that works for this particular machine, I would be very grateful to hear!

  Then, there are two things that I did not yet: updating the BIOS and turn off pinch zoom.

  I was watching the following BIOS update:

  http://www.Toshiba-Asia.com/SG/support/drivers/details/25244

  ... which is the version 3.00 and seem to be more recent. My version is 1.90.

  However, version 3.00 is labeled "for PTMB0 * ONLY. I don't know what that means or if it applies to me. Can anyone help? Should I install this BIOS?

  For the pinch zoom, I was informed that disable sometimes cures the problem CTRL - but I can't find any installation zoom pinch on the M10. I think he doesn't have any one. Is this fair?

  Thanks much for any help you can give.

  Hello

  > I was watching the next BIOS update. is the version 3.00, which seems to be most recent. My version is 1.90.

  There are different Tecra M10 models on the market.
  Check the labels at the bottom of the unit. There you should find numbers like for example PTMB0E-01K00LGR

  The first 6 characters are important: for example PTMB0E

  I guess that your laptop belongs to the series of Europeans.
  In this case, you should check the page of the Toshiba UE driver for a possible update of the BIOS.
  http://www.Toshiba.EU/innovation/download_drivers_bios.jsp

  However, on the page of the Toshiba UE driver you will also find the BIOS for all European units Tecra M10 v3.0.

  Anyway, back to Ctrl + button question: guess what, you need to connect an external USB keyboard and must check how is the CTRL key.
  In case the USB keyboard would work properly, the internal keyboard CTRL key is assigned and you will need to replace the internal keyboard.

  PS: it would be possible that the "sticky keys" option has been activated. To disable this feature, you must press SHIFT 5 times in the line.

• Tecra M10 - noise emissions

  Hello

  I'm new to this forum and looking for solution for continuous sound from the laptop Tecra M10. I can't play all other sounds. She starts soon as startup the laptop, but can be cut after the start of the window. Not sure if this is hardware or software. I spent at least 7 hours trying to fix this, but without success. Thank you very much for reading the post and any help will be much appreciated.

  Kind regards

  Kay

  Hello

  Since when you noticed this problem?
  What is your laptop pre-installed with original OS that you got with your laptop?

  Have you tested the feature with the factory settings?
  Is this problem with the internal speakers or there is no sound if you are using the headset too?
  > I spent at least 7 hours trying to fix this, but without success.
  What have you tried already?

• Blue screen of death, the Tecra M10 runing Win XP

  My Toshiba Tecra M10 works like a dream for three years without ever gasp

  Until the other day.

  My Toshiba laptop is constantly cycling with a BSoD - then I will start windows - it looks like it'll work - it gets in the paper password on screen - then a few blank screens - BSoD then again repeatedly

  I am running XP Pro SP 3

  I couldn't get my laptop to stop doing this, so I removed the battery and then the power cable and it started again and then when he went to BSoD I took a picture of the screen with my digicam fortunately I have one that focuses immediately and take the picture instantly too

  the ERROR is

  BAD_POOL_CALLER

  Tech Info

  STOP 0X000000C2 (0 X 00000043, 0XC38C0000, 0 X 00000000 0 00000000)

  I haven't changed anything on my PC recently and I have tried all the beginning of the top safe mode and last known good configuration but it still cycles round and round and round

  This laptop is not connected to anything and comes standard with a module of memory 2 MB in it to bog

  the last known good configuration does not either, nor did one of the other options in the "safe".

  So I slipped on the HARD drive and tried to boot from my XP CD - not the recovery of Toshiba, one that I have not tried this one in the laptop again.

  Rather unsurprisingly with no HARD drive in the laptop, I got a different error

  STOP 0X0000007B (0XF78D2524, 0XC0000034, 0X00000000, 0X00000000)

  which is I believe the inaccessible boot device - I know, it cannot see the HARD drive because it is sitting on my desk but would wait to boot from the XP CD... ISN'T IT?

  I tried to set all the parameters by default both boot - no difference

  With the HARD drive in - the laptop boots as windows user enter screen with no problems but doesn't stop on this screen - after a few screens blank the BSoD comes up and off it goes again.

  In the advanced startup options, I changed auto-start on setting error so it does not loop forever. and this prevents loop to the start cycle... seems to be changing this setting is not a permanent change

  Then I went into the BIOS and under the mode of the SATA AHCI to IDE controller and the STOP error 0x0000007B (0xF78D2524, 0xC0000034, 0x00000000, 0x00000000) is gone now and the pc will try to install Windows until I need to see the HARD drive and then gives up trying to install XP with a no. HHD error (the HHD is based of course on my desk) so it was a valid error expected...
  put the HARD return drive without changing the BIOS back makes it appear the STOP 0x000000C2 (0 x 00000043, 0xC38C0000, 0 x 00000000 0x00000000) error

  HELLLLLLLLLLLLLLLLLLLP please

  Hello

  I think you should test the HARD drive don't you agree?
  In my opinion, this should be the first part that should be checked since the new operating system installation was not possible

  I recommend the use of the tool called: HDD Drive Fitness Test. This software creates a bootable floppy to test. You can use this disk to run a test HARD drive without installation of any system.

  If the error would be detected: replace the HARD drive.
  If no error would be: use the Toshiba Recovery disk in order to install the system. (don t forget to put back the BIOS to default)

• Radio Frequency Interference on external monitor with Tecra M10

  I have a Tecra M10 that seems to emit RFI, causing lines of interference on the external VGA monitor and audible interference on its speakers.
  I was worried that this might be a hard drive in trouble, but before the call to support, decided to continue the investigation.

  First I tried unplugging all USB devices; the intervention was still there, so I tried to unplug the PC from the Express Port Replicator.
  As I moved forward, the noise has been reduced, and this led me to check the power supply.
  The unit is a 5 amp unit, PA3378-3AC3, and that seems to be the source of the DDR.

  Port replicator came with a spare unit 5 amp, PA2521E-2AC3, but there is too little noise from it.

  So I checked the two supplies with and without the duplicator.
  Noise each time.

  Suggestions - is something wrong or it is to be expected with the Tecra M10 RFI?

  Hello

  Have you checked if the same question would be displayed using the laptop with the own plugged AC adapter.
  Someone had very similar problem and it was a problem to the ground using a power cable 3 pins for different could solve this problem.

  But of course the question could be also related to the monitor cable external doggy.
  The user in this thread has this issue.
  The replacement of the power cable supplied with the monitor helped.

  It s worth a try check it out...

• Re: Tecra M10 stops down if it is locked and then login again (XP pro)!

  Hello

  A few weeks ago, I got a * Toshiba Tecra M10 * my company which I use as mobile office.
  I have downgraded to Windows XP pro, which was delivered with the M10.

  The laptop works fine except one question:
  * If I lock Windows using the < CTRL > + < alt > + < del > and then connect again, Windows stops! ?? *

  This does not happen if I turn on the laptop in the morning if I logon after the notbook has been powered on it works very well and does not stop is!

  Suspicion, what I can do to avoid this unwanted closure?

  Thanks a lot for your help!
  Concerning

  Sergeant

  I have never heard of this issue

  But I searched on the Toshiba site and I created this document which might be useful for you:
  http://APS2.toshiba-tro.de/KB0/TSB9102IN0000R01.htm

  Check it!

• Tecra M10 - 12M - clicking noise and slight stutter

  I have a problem of sound strange but serious with my Tecra M10 - 12 M in December 2008.
  It started to happen a month or two ago and behaves like this:

  After the reboot of Vista business, the sound is perfect.
  I use my computer throughout the day, then put it in mode "sleep" during the night. The problem begins with the sounds of rattling occasional and slight stutter, then gradually worsens. After 3 to 4 days, the PC becomes impossible to listen to or to use with Skype.

  I am a competent computer scientist and have tried to close systematically of all the applications, services, and processes to see if I could find an offender who caused the problem. I did not and I also checked that I have the latest drivers for the Realtek High Definition Audio (with EC). I also tried to disable all the improvements in the sound properties.

  The only thing that helps is restarted. The sound is so perfect even once immediately and for several days.

  A good example of this phenomenon can be found at http://www.netwv.net/Sound.mp3. Although the example originates from Skype, note that is not a problem associated Skype. But Skype is an important tool for me and this problem really completely disables my PC when it comes to use Skype and listen to the sounds.

  Any suggestions to solve this problem will be greatly appreciated!

  Willy

  > The only thing that helps is restarted. The sound is so perfect even once immediately and for several days.

  HM strange s it seems that not a sound driver of the questions that you updated the audio driver as well.
  I'm not quite sure what could cause this clicking noise when using the Skype
  Maybe you should to reinstall Skype too.

  If this will not help, then you should clean the BONES using the CCLeaner. This tool is free and cleans the registry and operating system.

  But if you still notice the right question then you should check if the new OS install help.
  To do this, you must use the Toshiba recovery disc!

• Recovery media for Tecra M10 - 10I required

  Hi all

  Sorry to post this here, but I hope someone can help me out here because unfortunately, after talking to a member of staff at Toshiba UK, the support I need, they can provide.

  I am a totally blind systems engineer and entrepreneur specialized in the legends of emergency to companies and specialist requirements, as well as installation, commissioning and decommissioning requirements, etc.. Recently, I lost my laptop main, unfortunately, he died because of overheating due to his age, a professional platform adapted to my needs to run the tools of my trade. the jury, burned into the RAM and HARD drive with her, it means I'm out of action,

  However, a friendly contact of my friends helped me with gift of a system of Tecra M10 - 10i who arrived this morning, to be configured, etc.. However, the internal HARD disk was photographed with a default image of their company and not the official recovery / installation OEM. The disk HARD deleted anyway and RAM upgraded to 8 GB to become my replacement. Right now I am borrowing a member of the family system and running an edition of reader pen of my screen reader configuration. so access to emails, notes, etc. only.

  My setup is based on different hardware and software components including chassis magma with PCIE cards, for data and the access control etc.

  What I would do, it is the Image of the system using Toshiba recovery disks, however, I can't get hold of them through toshiba site and the site that sells isn't easy to blind, or use credit cards, etc., so here's the problem. Toshiba tell me that they can not provide recovery media and I have to go to a provider they use on the web and order records, etc.

  This may be against policy here, so I apologize if this is the case, however, anyone here happen to have the recovery media for a system Tecra M10 - 10i, so Windows Vista Enterprise or Windows 7 Pro or similar that can update the system? The reason I ask because it is, it is easier for me to use a recovery image based or automated Ghost for this so I can install my screen, braille display driver reader interface, etc. and be running, rather than panic during the configuration of the audio without braille drivers / audio feedback.

  If you can help, please e-mail me at [email protected]

  Cheers.

  Ed

  > What I would like to make, it is the Image of the system using Toshiba recovery disks, however, I can't get hold of them through toshiba site and the site that sells is not blind to the environment, or use credit cards, etc., so here's the problem.

  Dear Ed, I'm sorry to hear that it of difficult and impossible for you to order the Toshiba recovery from the Arvato page disk. Unfortunately, I m not Tecra M10 owner and don t have recovery for this unit disc.
  But maybe you could ask a family member or a friend for assistance.

  It (a credit card owner) could place an order for recovery on page Arvato disk and could order the media for you.

• Tecra M10 - light screen problems

  Hi guys,.

  at first I m sorry for my English is not perfect.

  That is the problem.

  When I created the brightness on my screen on max, everything is OK.
  But when I put it down to minimum, after awhile the diodes (or bulbs) stop working.

  I think there are 4 LEDs in the screen for two more left to stop work.
  When I created the brightness to max once again, after a while these left diodes begin to work again and everything seems fine.

  I thought that I would like to reinstall the display driver, but when I download and run the Setup.exe it says that my pc does not meet the requirements for the installation of this software and I have no idea why.

  Any idea what should I do?

  Thanks for your advice.

  Lucien

  PS: I have Tecra M10. C2D, Nvidia Quadro NVS 150

  > When I created the brightness to max once again, after a while these left diodes begin to work again and everything seems fine.

  Don t think its problem of diodes generally the FL inverter controls the brightness of the screen.
  The fl inverter is a small part that is placed behind the frame of the screen.

  I would say that this part needs to be replaced, but of course this is only my personal opinion and I recommend you ask a technician for a control before changing anything.

• Tecra M10: Intel Proset Prelogon fail

  I have a Toshiba Tecra M10, which has an Intel(r) WiFi Link 5100 AGN inside.

  I have wireless installation before opening of session with Intel proset software worm 12.2.

  When I cold start and try to connect immediately he failed to open a session.
  If I'm cold starts, wait 10 minutes, it connects fine.

  Any ideas what could be causng this?
  Is there something to load before I login?

  I inquired with Intel too and waits for a response. By covering just the basics!

  Hey Montana

  Can you please try it for me?
  Can you check the WLAN functionality if you enable mode 802.11 g only?
  This connectivity problem there?

• Install of Win7 64 bit on Tecra M10 - 11V

  I have to update the Bios before a clean install of Win7 64 bit on my Tecra M10 - 11V?

  Should I regularly check and update the Bios?

  After installation the program "Toshiba Software Installer for Windows 7" find and update all the drivers and the necessary utilities?

  Thank you

  In my opinion you should not update BIOS. You have the latest version of BIOS 3.0 installed on your Tecra?

  Can you please tell us what you want to do exactly? You want to upgrade Vista preinstalled or you want to do the new install of Win7? If yes how do you do this? With the help of the Microsoft installation disc?