HP Envy Phoenix 800-060 BIOS update

Similar Questions

• HP ENVY PHOENIX 800-060: the gtx 1060 is compatible with phoenix want 800-060?

  I want to upgrade my graphics card to my phoenix envy hp 800-060 of the 645 to a 1060 6 GB gtx gtx, but I don't know if it's compatible or fit in my computer...

  Hello! @charline1, thank you for visiting the Forums from the HP Support!

  I understand that you need to know if you can upgrade the graphics card to gtx1060 on your PC.

  Given that the motherboard supports the PCIe x 16 slot gtx1060 graphics card is compatible with your PC, you can upgrade the graphics card.

  I hope that answers your query!

  See you soon!

• HP ENVY PHOENIX 800-060: transfer windows want to 800 motherboard again - 060

  Hello

  I bought this new computer there is a little more than two years and now I tells me that the motherboard and power supply have out crapped on me. We could think of a motherboard should last longer than that, but I digress...

  I would replace the motherboard so that I can save the rest of the computer. Is it possible to transfer my license windows from the old motherboard to the new? Or I have to buy another license?

  Thank you

  Greetings,

  I hope that you back up the important things on several external media and in the cloud until it happened.

  The failure of food fry the HDD/SSD or any other component?

  You can contact HP to service here.

  HP will replace the motherboard and the MB of tattoo. This would allow you to use HP recovery media to bring the system to a factory State. You wouldn't need a new Windows product key.

  Do you make or buy HP recovery discs before this catastrophic event? It appears your PC comes with Win 8.0. Recovery media, you can order here.

  HP will reinstall Win 8.0 if you replace the defective components and tie the mother of replacement HP factory for the chassis number of the system (tattoo).

  If you replace the motherboard on your own, you can buy a new Windows product key.

  See you soon

• need screws for hard drive for HP Envy Phoenix 800-060

  Where can I order some of these guide of cylinder head screws that you screw on the sides of a new drive, so it will slide along the rails and lock in place in the internal slots 3.5 "? No extra charges not supplied with my computer. I need to install 2 drives more then need 8 screws (4 screws by the reader).

  I called the computer of our local Mom & Pop shop and they offered to sell me a dozen screws for $1. I guess that's the only way. HP does not have.

• Add memory to HP ENVY Phoenix 800 - 070st - free space for the locations of memory behind the radiator.

  Hello

  I ordered a HP ENVY Phoenix 800 - 070st with 16 GB of memory and is to be delivered Friday. My question is how much clearance is here to the sticks of memory in the slots behind the radiator and the radiator has to be removed for adding memory to these two locations. Will it take low memory footprint, or is there room for mem sticks with heat sinks. It won't be here until next week, if just trying to plan ahead.

  Thank you

  Bryan

  Gateb, welcome to the forum.

  I can't find any warnings about any of your concerns in the specs of HP.  However, having said that, I suggest wait you receive the computer to make purchases.  HP isn't necessarily embracing third-party updates.  Memory performance with heat sinks can be very important, as you know, or you have asked the question.  Better safe than sorry.  Just my $. 02.

  Moreover, it is a great computer.

  If your problem is solved, please click "accept as a Solution.

• ENVY M7 n109dx: Post - BIOS update 6/26 no HDMI output to secondary screen

  After that the updated BIOS update yesterday my secondary monitor has not worked. The computer is unable to detect in the settings of the device. Given what has happened, I have:

  Cable unplugged/Replugged and made sure all lights (when you plug the HDMI from the monitor in the specifications of the monitor select several HDMI and analog times and falls asleep so it gets a connection)

  Have you tried both HDMI cables, a new brand

  Tried to update the drivers, I was told that they have been updated

  Downloaded new drivers from HP Support Assistant and installed, Rebooted

  Rolled back the BIOS to the previous version

  I have tested the monitor on my MacBook and it works, if it's not the monitor

  and the laptop is still not pick up my screen!

  Help, please!

  Hi @sschultz,

  Thank you for posting this information. To alert others to what does not work for you, please consider marking "acceptable Solution" on your desktop. This will give him more visibility when other people who may have the same question are looking for help.

• Want to Phoenix 800-060: ID Type MB MSI

  I am trying to determine the compatibility of the new GPU for my 800-060 HP but can't seem to find the MSI MB which is in this system, so I can make that determination. I ran CPU - z and it said that the manufacturer is HP but we all know that HP does not MB; in this system they are using MSI. MB MSI is listed as MS-7826 (Kaili) but I can't find the part # on the MSI site. I'm also using a website 'pcpartpicker', which ensures compatibility with MB & GPU - a very good site if you have all the information available.

  I'm so looking to upgrade my GPU GTX645 and hope someone can tell me what are the options I would have giving me some missing information I need.

  CTechInfo! indicates the specific MSI/Microstar was an OEM version by HP features.
  No retail commercial version
  http://www.ctechinfo.NET/boards/MSI/Kaili.php

  Who is CTechInfo?
  http://www.ctechinfo.NET

• HP ENVY laptop - 15-k112tx: Bios Update HP support assistant takes too long to install. !!!

  I have a Hp Envy-15-k-112tx.
  System SKU-K2N90PA #ACJ

  BIOS Version/Date-Insyde F.34, 19/12/2014
  Name of operating system Microsoft Windows 10 single Home Language
  My Hp support assistant hangs during installation of the UPDATE of the BIOS from HP (Intel processors). I have run several times now, but every time it crashes on installation. How can I update my BIOS?

  Go to your Support and download page & save the BIOS. Then click Run.

  http://support.HP.com/us-en/drivers/selfservice/HP-envy-15-K100-notebook-PC/7234894/model/7407332#Z7_3054ICK0K8UDA0AQC11TA930O2

• HP ENVY PHOENIX 800-030qe: the system recovery media does not support this computer

  Hello!

  I can't recover to factory settings using recovery media (4 DVD) after changing HD (the previous device has crashed/broken).  The message is: "the media recovey system does not support this computer. You are not able to restore this system with this media. »

  So, what should I do?

  Thank you very much.

  Luiz Borges

  Upgrade the BIOS/downgrade will not fix it unfortunately.

• What are some possible PSU that can fit into a HP Envy Phoenix 800-030qe

  I'm looking for a new power supply and a GPU soon. It is difficult to tell an image on the internet if she will agree even with the dimensions of the case and the power supply. What I really would like to, it is MI CoolMaster V850 because will change from the GPU and everything to come. ID rather go a lot on what I bad finish to help and have some extra, then buy a new one when I start to change things more. No position would be great. I was looking at the GPU was the EVGA GTX 750ti FTW. Thank you

  This is the basic material: http://support.hp.com/us-en/document/c03804605

  Hello

  The EVGA NVIDIA GTX 750ti should work without modification of the power supply.  Save you money and keep the HP 600 watt PSU.

  HP Secure Boot Windows 8 themes Computer does not start after the installation of a video (Windows 8) card  

• HP ENVY Phoenix 800-019eb (ENERGY STAR) desktop PC (E3H43EA)

  Hello

  In this PC is a NVIDIA GeForce GTX 680 with integrated graphics Intel HD Graphics 4600 (GT2).

  I wonder if it is possible to extend this PC with exactly the same graphics card with this integrated graphics card.

  It is not possible.  Intel does not PCI express video cards.

  Integrated graphics is a HD graphic chip, not a card, which is built into the chipset of the motherboard.

  Best regards
  ERICO

• Can I install a 3rd hard drive (SSD) on my desire to Phoenix 800?

  Hi, I just bought a Phoenix 800-089 wanted and I was wondering if I could use for an another SSD expansion Bay?

  There are already an SSD installed and do not know if the expansion Bay would allow another?

  If so, do I need to purchase a support of editing or something else so he can adapt?

  Thanks for your help.

  The HP ENVY Phoenix 800-089 desktop has space for three 3.5 hard drives "and two optical drives 5.25". Using the adapter rails, you can install a 2.5 SSD "in the third-party hard disk or in the second Bay oprtical Bay. A set of 2.5 "to 3.5" adapter may have been provided with your new SSD. If this isn't the case, any computer and/or electronic store will be available adapters.

  If you have any other questions, feel free to ask.

  Please click the White Star of KUDOS to show your appreciation

• HP Envy Phoenix h9 - 1420t: Support Assistant will be not updated

  Computer model: HP Envy Phoenix h9 - 1420t

  OS: Win 8.1 Pro 64-bit

  HP Support Assistant

  Version: 8.3.27.17

  Framework: 12.5.26.37

  Since the upgrade to the latest version of the Support Assistant, I am unable to check the updates. The program has successfully completed phase "connect to HP servers", but then fails (x-watch gray instead of green check mark) to complete the remaining steps:

  • Download messages and updates of definition
  • Gathering configuration information
  • Scan your system
  • Preparation of the list of actions

  Any suggestions on arises at work?

  The steps I've tried: uninstallation with Revouninstaller, resettlement, reset

  @troubleshoot411, welcome to the forum.

  I agree with using Revo.  This is my go to app for malware.  When you used Revo, you use the advanced option?  This will not only remove the program from the HARD disk, but it removes remnants of the BIOS.  If this is not the case, this could be the problem.  I suggest to try the advanced option to remove HPSA and shut down the computer.  Then, start and reinstall HPSA here.

  Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.

• HP ENVY 700-030qe: BIOS updates for my HP desktop computer

  I have a desktop HP ENVY 700-030qe with Windows 8. While looking through the updates of software available for my system, I have seen two listed in the BIOS:

  (1) HP Compaq consumer Desktop PC BIOS for ROM family SSID 2AF3 dated October 2014.

  (2) HP Desktop BIOS update system for PC HP ENVY 700/800/810 with 2AF3 family ROM dated May 2014.

  1. How will I know what family of ROM BIOS I have? I have pictures of all the screens of BIOS that I could get and nothing mentioned family BIOS ROM. I still have the BIOS original version KAI 80.07.

  2. the two updates apply to my computer? The wording is confusing. It seems that only the second apply to my system unless one applies to a more general category of the office. If both apply, as the first is the most recent, which would be the one to use?

  3. There is an issued for the BIOS in June security update that I ran across here. Which does not appear in the update list. Why would that not replace the other? Can I assume that the October update would include this security update?

  Thank you

  JohnD

  Hello @jpd_az,

  I read your post about how you're looking to update your system BIOS and what version of the software to install. I'd be happy to help you in this case!

  The version of the BIOS, you want to download and install is 80.23 A, which can be downloaded by clicking on the link below:

  • Update BIOS HP Compaq consumer desktop PC (SSID family ROM 2AF3)

  To update this software, I recommend that you follow the steps described in this document on the updates to the BIOS.

  Please re-post with the results of your troubleshooting, and I look forward to your response!

  Concerning

• ENVY 13-D046TU: F.35Ap1 BIOS update kills port HDMI on ENVY laptop

  After installation of the firmware update marked Softpaq number: SP75152, F.35Ap1 Version now four of our laptops (13 "and 14" ENVY ENVY) have a HDMI port not working. The external screens are 'no signal '.

  We spent a lot of time with the help of HP (via Hong Kong, we found ourselves in India). Remote control sessions. All a waste of time. The update of the BIOS is faulty, no system restore cannot solve this problem.

  Same day (June 13, 2016) one of our laptops automatically installed this update of the BIOS with the HP Support Assistant and killed the HDMI port.

  A. is there a way to acquire and install the previous BIOS?

  When can b. we expect a new update of the BIOS?

  C. how the hell did this update of the BIOS pass test? -> 4 / 4 updated computers laptops have a broken HDMI port. We have 7 other laptop on the left who are fortunately not updated.

  Hi there @BugFinderand @DebVancouver.

  Welcome to the Forums of HP Support!  It's a good place to find the help you need, other users, HP experts and other support staff. From what I understand, bothl of you experience the same problem with HDMI after a BIOS update.  I'm happy to help you with this.

  I would, if possible, that each of you try the laptops HP - restore the BIOS to a restoration to the having previously worked BIOS.  The main purpose is to return you to a working state. If this method works for you, obviously do not install BIOS update again.

  Edit: Bugfinder reported that restoration, the method of BIOS didn't work for him, but he had to do several times (4 times in at least one case). I guess you could say that it is true to its name, and I thank very you much for the comments.

  Please let me know if it works for you and if not let me know if there is an error message any. If this does not solve your immediate problem, please mark this message as a solution. Bravo would be appreciated as well.