HP G42-361TX driver

Hello, where can I get HP G42-361TX drivers for Windows 7?

I searched it on the HP Support Web site, but it says not found.

Thank you.

Its a Broadcom wireless network

Tags: Notebooks

Similar Questions

  • Pavilion g42 361tx: 6 GB ram upgrade

    Hi, I have a notebook hp g42 361tx with 2 GB of ram

    now, I want to upgrade the RAM of 4 GB

    My question is

    1 corsair DDR3 SO-DIMM 4 GB PC10666 - CMSO4GX3M1A1333C9 (1x4Go) this ram compatible with my laptop or not?

    2 is ok 4 GB + 2 GB?

    3 is SO - DIMM DDR3 Corsair 4 GB PC10666 - CMSO4GX3M1A1333C9 (1x4Go) have the same original calendar with my ram?

    4. 10700 10600 same pc?

    5 or any suggestionto me?

    THX b4 ~.

    my laptop spec with aida:

    Spoiler (Highlight to read)
    aida64 pic



    aida64 pic
    Spoiler (Highlight to read)

    Oh, that corsair may cause some trouble?

    Hmm...

    But thx for your reply, I think that I wil take only corsair 4 GB

    TQ very much Sir

  • My ati radeon 5470 g42-361tx freezes video

    Straigth to the point, as shown above, I got the screen freezes (system hang) whenever I try to play a video (if a file or a dvd video) on windows media player.

    Windows reset the radeon whenever it happened, but I could not play a video every time.

    below I include the file generated by win7 when it crashes.

    My portable xml and dmp data when it crashes

    I use Windows 7 64-bit. Therefore, I have to downgrade (new installation) on same XP Pro 32 bit and Windows 7 32 bit, but it happened every time. I've already upgraded to new BIOS, driver ATI also. But it won't just get it fixed.

    I suspect that the driver in conflict with the device (not at all compatible?).

    I tried everything I could get my hands, but now I've left mouth gaping. Please any advice is appreciated. Thank you

    I guess I'm a little confused and did not bother to check on the update of drivers before posting.

    I had the problem since last January 2011, after all this time, HP had put more recent BIOS update on Feb 2011.

    The link for Win7 is here.

    So my problem is solved. If all goes well for everyone puzzled like me .

    Admin, please report this post as solved. Thank you.

  • HP g42 230 br: network controller & pci simple communications controller driver missing

    Hello. I need help.

    My laptop HP G42 230 BR simply stopped access to the internet and I noticed in Device Manager that the controller network & pci simple communication controller drivers are missing. I tried to install a few drivers I found online, but without success. I formatted and reinstalled windows 7 and still the same.

    Please, how can I solve this problem? Any help would be really appreciated!

    Thak you.

    Hello:

    You need this driver for the controller of communication simple pci:

    This package provides the driver Intel Management Engine Interface (MEI) for the notebook models and operating systems. The Intel Management Engine Interface allows communication between the host operating system and the Intel Management Engine firmware.

    File name: sp52353.exe

    You need this driver for network controller, according to the list of parts for your PC.

    This package contains the installation package driver for the controller LAN Realtek RTL8191SE wireless in the notebook models and operating systems.

    File name: sp47860.exe

  • Driver for HP G42 Notebook PC Bluetooth

    Hey you please help me get a driver for bluetooth for laptop HP G42 device

    Hi rc98,

    I understand that you get an error when you try to connect a device.  Check this out to understand and troubleshoot the Bluetooth wireless technology. On this page you will find a link which will allow you to put you in the exact model # of your HP g42 and download the right driver Bluetooth. You will see a list of available downloads, please click the Driver Network section. I hope this helps, please let me know if you need more help.

    Thank you

  • New hard drive, see is not in the Bios F23, hp g42 281la

    My old hard drive has stopped working (couldn't even restore). I bought a new hard drive (the same) and bios F23 is not see it.

    Please help solve the problem.

    Thank you.

    Hi Ivan_Vasilyev,

    I understand that you are having problems with the BIOS on your laptop HP G42-281LA. Here's a download for the F.27 BIOS updated (which is the most recent) Version.

    http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-93590-1&cc=us&DLC=en&LC=en&OS=4063&product=4311607&sw_lang=

    I hope this helps.

    Thank you.

  • HP G42-230us optical drive update

    I recently bought a HP G42-230us. I was wondering if I can upgrade the optical drive with a blu - ray player stock? I searched a bit on the internet but had no luck.

    Portable SATA optical drives are all the same size, it is because the media are.

    It works over there, Windows will automatically install the drivers for you. It was reported that Sony's Blu - ray discs have incompatible driver problems, so avoid the Sony. Samsung and Panasonic are good choices, Toshiba would probably be good too.

    http://CGI.eBay.com/Samsung-Blu-ray-BD-ROM-8X-DVD-RW-laptop-SATA-drive-new-/370491248810?PT=PCC_Drives_Storage_Internal&hash=item5642ffd0aa

    The rear mount which is held in place by two screws philips is reused on the new drive and the plate of the front on your old drive is mounted on the new drive.

    http://www.YouTube.com/watch?v=9CpOL8y2B9Q

    The video drags on a bit, but it gets to the part where he finally removes the bezel face plate.

    This version of Media Smart should work well with your ATI graphics card.

    FTP://ftp.HP.com/pub/SoftPaq/sp49001-49500/sp49489.exe

    Save it on the desktop and then to download 7 - Zip and restart.

    http://www.7-zip.org/download.html

    Right click on the install Media Smart file and use 7-Zip to "extract files". Click this folder and look for the CBC. From there, look for the Setup file sixth one at the bottom) to install MS DVD.

    When it came time to install, disconnect from the internet and disable your anti virus and firewall software.

    Restart your computer after the installation and activate your firewall and antivirus, if this is not done automatically.

  • HP G42-415DX: Windwos 10 necessary drivers on a clean reinstall

    After that my HP G42-415DX crashed, MS local office HAD to do a clean Windows 10 (home) install. Although I am running, but my screen is shorty and problems with the audio drivers.

    Any help please?

    Munda786

    Hello;

    Let me welcome you on the HP forums!

    Sorry to be the bearer of bad news, but the problem you face is that Microsoft provides only pilots with the most basic features and what you really need for these features is the specialized drivers written for the specific in your HP PC hardware - and unfortunately, there is no driver HP Win10 for your PC. HP only guarantees the compatibility of Win10 for machines manufactured after August 2013. HP is not no matter what timetable indicating when, or IF, they will produce drivers for older machines.

    This means that your PC is probably NEVER going to be fully functional under Win10 because the drivers he needs for these features simply do not exist!

  • PCI SIMPLE COMMUNICATIONS CONTROLLER DRIVERS for WINDOWS 7 Ultimate 32 bit for HP G62-361TX

    Hello

    I upgraded OS and installed the drivers. All the drivers are fine looking, except I get the error in the network and Communications PCI controllers controller driver. Can someone please help me get the correct drivers? For this reason, I am not able to connect to the wireless network.

    When trying to install motorola Ralink wireless driver adapter bluethoot, Iam getting error "Bluethoot material must be enabled before installing the driver for this" and attending Wireless it is showing people with disabilities and showing willnot be able to from here. However, blue LED on F12 is on and I couldn't find an option to turn on a wireless device in the BIOS. Not sure that these problems are related?

    I want to just enable the wifi networks. Help, please.

    Here's my laptop details:

    Model No.: HP G62-361TX

    OS: Windows Ultimate 32 bit

    Any help will be appreciated.

    Thank you

    Hello:

    You need this driver for the PCI communication controller.

    http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-80009-1 & CC = US & DLC = in & LC = on & os = 4062 & Product = 4296702 & sw_lang=.

    I need to view the ID of the hardware for the network controller (you can copy and paste text directly from Device Manager), so I can post the link to the drivers for it.

    Go to Device Manager, then click on the network with the small yellow controller! Select this option.

    Then follow these instructions to find the hardware ID.

    The hardware for a Windows device id is located in the Windows Device Manager. To check the hardware for a device id, follow these steps:

    1. Open the Device Manager in the Control Panel. You can also type "devmgmt.msc" in the run option in the Start menu.
    2. In Device Manager, right click on the device and select Properties from the context menu.
    3. Then, select the Details tab.
    4. Now select the hardware ID in the drop-down list.

  • Replacing the HARD drive

    My laptop is model: HP G62 - 361TX NB PC all THE... My HARD drive I thnk not working not properly... I'll replace it... ghoulish u help me is this drive is Compatible with my laptop...

    Internal hard drive Hitachi 500 GB portable (Travelstar 5K 1000)

    Portable Device Type 2.5 inch spin speed disk capacity 500 GB drive HARD 5400 RPM Interface SATA 3.0 Gbps Memory Cache 8 MB average latency 5.5 ms average seek time 12 ms (read) reliability 600000 (charge/discharge Cycles)

    OR

    WD 1 TB computer internal laptop hard drive (WD10JPVT/WD10JPVX)

    DRIVE CONFIGURATION Handheld Device Type 2.5 inch HDD Drive capacity 1 TB Spin speed 5400 RPM Interface SATA 3.0 Gbps Cache Memory 8 MB transfer rate 150 MB/s data transfer rate (shared with host) 3072 MB / s Non-recoverable Read Error 1 per 10 ^ 14 reliability 600000 (charge/discharge Cycles)

    OR

    Solid State Drive Hybrid 7 mm thickness portable Seagate internal hard drive 500 GB (ST500LM000)

    DISK CONFIGURATION Handheld Device Type disk drive HARD Interface SATA 6.0 GB/s 500 GB capacity

    Please help me with this...

    One of them will work, but of the three, you want the Seagate hybrid car. It will be faster, even if more expensive.

    Here is your Service Manual:

    Manual

    Replacing the hard drive begins on page 4-8.

    If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

  • Battery of the BIOS G42-415DX

    The BIOS for a G42-415DX battery that I bought used rattling inside the case.  I was able to coax out through the hard drive Bay, but now I want to set up.  Can someone show me instructions on how to replace the BIOS battery?

    Hello

    Unfortunately, this will require a lot of dismantling the cell of RTC is clipped on the below map system - see Page 96 of your Service & Maintenance Guide for more details.

    Kind regards

    DP - K

  • G42 - 490 YOU: what changes can I see or wait until after the upgrade of RAM?

    Hello

    My PC model # is G42-490TU, processor - Intel Core (TM) i3 CPU M370,
    RAM: 6.00 GB (2.93 usable), System Type: 32-bit operating system.

    I've recently upgraded RAM 2.00 GB to 6,00 GB with 2.93 GB usable, that's what it shows.

    I want to know if this 2.93 GB of 6,00 GB usable the correct value of the memory that is made available?

    Also, I want to know what changes can I see or wait after upgrading the RAM from 2.00 to 6.00 GB where 2.93 GB is usable? How does this improve the effectiveness of my PC? Is there something that needs to be done on my own apart from adding the RAM to increase performance and the maintenance of my PC?

    Thank you best regards &,.

    Isha

    The problem is the operating system of your laptop is 32-bit.

    A 32-bit operating system can use @ 3.25 GB installed memory.

    Install additional 4 GB to a laptop that had 2 GB was a regrettable mistake.

    As long as the 4 GB memory module you have is compatible, you'd better remove the 2 GB module and put the 4 GB module in its place.

    You won't find a lot of improvement with the current configuration of a 2 GB module and a 4 GB module. With this memory configuration does not work in dual channel mode.  You would be better with two modules of 4 GB, but this is only if you upgrade your operating system to a 64-bit version.

    In fact, you would have improved if your OS is 64-bit. A 64-bit Windows operating system will recognize and use the installed memory.

    If you really want to improve the performance of the laptop, you should consider upgrading to a SATA SSD 256 GB drive at least.

  • Controller network & pci simple communications controller driver missing

    Hello

    I just reinstalled my HP g42 360 TX laptop.

    Operating system: windows 7

    driver network controller and PCI simple communications controller driver are not installed and the wifi does not work

    Here the hardware ID

    network controller:

     

    PCI\VEN_14E4 & DEV_4727 & SUBSYS_1483103C & REV_01
    PCI\VEN_14E4 & DEV_4727 & SUBSYS_1483103C
    PCI\VEN_14E4 & DEV_4727 & CC_028000
    PCI\VEN_14E4 & DEV_4727 & CC_0280

    PCI simple communication controller:

     

    PCI\VEN_8086 & DEV_3B64 & SUBSYS_1426103C & REV_06
    PCI\VEN_8086 & DEV_3B64 & SUBSYS_1426103C
    PCI\VEN_8086 & DEV_3B64 & CC_078000
    PCI\VEN_8086 & DEV_3B64 & CC_0780

    and I want to know why my laptop cannot connect to the internet via a wifi connection?

     

    Hello

    Please try:

    PCI\VEN_14E4 & DEV_4727 & SUBSYS_145C103C & REV_01
    Broadcom Wireless LAN Driver for Microsoft Windows 7:

    http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-81598-1&LC=en&DLC=en&cc=us&product=4230610&sw_lang=&OS=4063

    PCI\VEN_8086 & DEV_3B64 & SUBSYS_1488103C & REV_06
    Intel Management Engine Interface (MEI) driver:

    http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-79549-1&LC=en&DLC=en&cc=us

    Kind regards.

  • Looking for driver 92HD91 IDT without Beats Audio

    I just got a HP Touchsmart 320-1122LA because he needed an all-in-one solution and because it has a touch screen. My required use is for professional audio processing, so any function 'boost' the dynamics of the sound or add any EQ setting is not accurate for my needs, it includes when no ASIO driver is used, as with normal sound reproduction (because I listen to sound sources too without going through any ASIO driver).

    Beats Audio enabled use audio improvements (compression, strengthening of sound intensity), I tried to turn off the feature, but when he arrives, the sound becomes a shit: low frequencies are disappearing (crappy thing, I'm very angry, very angry because that , it didn't happen when I disable one of the features of backup with my laptop HP G42-362LA) (, which is not "Audio Beats" and low frequencies are not cut sounds very well and very well), so I check that Beats Audio essentially try to lie to the consumer with a "low sound quality" which is more than a sound filtered bass. I don't care your marketing strategies, but I care about what I get my money and I want a driver that works without any processing of the sound without cutting off low frequencies when I disable this function of "sound directly from heaven.

    Said that, I need a full IDT 92HD91 audio driver without Beats Audio and cut out any of my frequencies. HP, can you be nice to give me this driver, as in your support page only "Beats Audio" driver is available? If not, can you let me know how to solve the problem?

    Thank you.

    Hi frrw:

    Tried your solution but did not work. This IDT audio driver is not appropriate for this version of the equipment.

    I solved the problem mainly by uninstalling native IDT Audio Controller "Programs and features" on the Control Panel, then reboot. Windows 7 automatically loads any other generic driver.

    On your statement: "I don't think it Beats Audio software problem but the speakers themselves is the real question." mmm... I use these same speakers (professional studio attached to a studio mixer) with very different sound sources (other computers, DJing, instruments) and is clear to me that the Beats Audio made down the low frequencies when disabled because it did not happen when using another sound source. My suggestion for HP is essentially to be honest with consumers with no trying to simulate a "poor sound quality' (at least I have the impression that arise since this problem happened), as nobody does the option inside Beats Audio abled get 'normal' sounding (0dB not equalized sound) frequencies. Beats Audio feature is attractive in itself because it is directly related with the quality by the consumer, so I can understand that the sound is standard with Beats Audio activated, compressed, loudness becomes strengthened and overall EQ tweaked (and really cool). This is no cool, it's that I said before. There is no need to do that. I'm a loyal buyer of HP for 10 years (at least I have buyed 10 HP devices) and this is the first time that I have a similar problem.

    In any case, thank you for your support. Best wishes.

  • How to install windows XP in dual boot os in my laptop HP G42-351TX preloaded with Win 7

    My laptop has the configuration as follows:

    Intel corei3 processor

    2 GB OF DDR3 RAM,

    320 GB SATA HARD DRIVE,

    ATI Mobility Radeon HD5430

    When I tried to install XP in reducing the volume and create the new disk, collapsed with BSD saying material changed, check the drive for errors and viruses with error code (I forgot) etc after installing some drivers. It will stop only when "starting windows" like status bar message. I need to install XP only incase if we cannot install the dual boot OS. Pls tell me the step by step procedure to do this.

    Sorry, but your new HP G42-351TX is not supported by the old operating system to Windows XP.  If you want to install Windows XP, yopu need via Windows XP Mode.

    Install and use Windows XP Mode in Windows 7

    Windows Anytime Upgrade: Windows 7 Home Premium to professional

    Carey Frisch

Maybe you are looking for