New hard drive, see is not in the Bios F23, hp g42 281la

Similar Questions

• installed the new hard drive, but could not find the original CD.

  I have a hp w6243p desktop computer.  I installed a new hard drive but cannot find my original driver cd so I ordered one online, I have nothing on my computer, please help

  Hello

  Driver for what?

  Check with HP Support, their drivers and documentation online and ask in their forums
  on known problems.

  HP support/troubleshooting & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/
  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Hard drive has been corrupted and replaced it with the new hard drive but couldn't get the windows genuine back 8

  Original title: recovery of original windows 8

  When I bought the new device, it was loaded with windows 8 but a few days before my hard drive has been corrupted and replaced it with the new hard drive but could not get the real Windows back 8.

  Please help me to get my windows genuine 8 back so I could get additional updates downloaded.

  Hello Vishal,

  Welcome to the Microsoft community. I appreciate your efforts to resolve the issue. I will certainly help you with the problem you are experiencing.

  If you purchased a computer with installed OEM Windows 8 on it, there could be a sticker on the Tower, or in the back (in the case of a laptop) with the product key to this topic. If there is no sticker, he can be preinstalled on your system BIOS.

  See the suggestions posted by Andre Da Costa replied on March 7, 2013.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-windows_install/how-to-get-Windows-8-product-key-in-preloaded/ea0e53ae-3506-4ba2-a092-f266ece7072f?auth=1

  In addition to this, see:

  Product key lost or misplaced (certificate of authenticity) for Windows

  If the problem persists, you can contact the manufacturer of the hardware for the same thing and check.

  Hope this information was useful.

• Hello, my parents computer came RAM volume0 has failed and not be able to start. We went and brought a new hard drive, and its always say the same thing. Any ideas?

  Hello, my parents computer came RAM volume0 has failed and not be able to start. We went and brought a new hard drive, and its always say the same thing. Any ideas?

  A message on the RAID 0 volume failed is a recognizable error message, but the news is not good.

  RAID, by its nature, requires 2 or more drives.  RAID = redundant Bay of independent (or inexpensive) disks

  RAID 0 is the worst of the different RAID choices.  It increases the performance of hard disk by spreading or striping, data on two disks so that he can read and write more quickly. Unfortunately, such a picture offers no protection of data - in fact, it increases the chances of loss of data since the failure of a disk in the array results in the loss of all data on both drives. RAID 0 configurations are standard on high-end and PCs graphics games and provide a performance gain measurable, albeit modest for games, graphics applications and other programs intense from the hard drive.

  In view of the foregoing, the best course of action for you and your parents is to take the computer to a local computer professional - not a type of place BigBoxStoreUSA or GeekSquad.

• Installed the new hard drive - now "OS not found"

  Hi, I recently installed a new hard drive in my laptop because the old hard drive was dead. So, I installed the hard drive and I am now installing the operating system using the Dell disk I received with my laptop. This is for the 32-bit window Vista and it says it should be used for re-installation of Vista. It was in a sealed envelope - so it has never been used.

  When I start the laptop and insert the disc, it just says: operating system not found.  I made sure the cd drive is the first in the startup list.  I also put the drive into another laptop and copied the files on a USB key.  Then tried to install it on the USB. No luck.

  I have run the system diagnostics, and it says that my hard drive and cd drive are recognized and functioning.

  The dell cd drive is not bootable?  Thanks in advance for your help.

  I was able to fix this on my own. It turns out that one of the files has been altered I discovered once I was finally able to get it to boot from a USB device.  I found the one window Vista installation disk other that I have with another computer laptop and used that. Worked well.

• Computer failure, hard drive readable: can not find the 5 Lightroom Catalog.

  Computer failure, hard drive readable: can not find the 5 Lightroom Catalog. Help appreciated.

  I used 5.3 LR on Win7, never pay attention in the name of the catalog used. My photo files were on the same physical hard disk D: partition.

  Now that I have a new computer Intel NUC, with Win7 installed on drive C: (SSD M.2), I plugged my old drive hard drive E: (old C :) and drive F (old d :))

  I have re-installed LR 5.3 and also upgraded to LR 6, , but the problem is that I can't find the catalog I was using with LR 5.3

  I searched for *.lrcat and see all previous catalogues lightroom starting with LR 2, 3, 4, 5, getting bigger and bigger, but not catalog 5 including the current date.

  The catalog would have another name or extension?

  I have the old C: drive. Is there a config file that would confirm where the catalogue is supposed to be?

  Help!

  HM, it is clear that it is not found on your old C: (so E :). )

  And there is no config file to tell where to find the catalog to Lightroom. It's just that the catalog is in the place you choose (most of the people chose to have the catalog to the location by default...).

• Can I transfer creative suite adobe in a new hard drive with time machine if the current hard drive failed?

  My drive hard mac failed and I got a new drive to come. I save the news a few weeks before the accident with time machine.

  Can I transfer creative suite adobe in a new hard drive with time machine if the current hard drive failed?

  Hello

  Transfer of the installed application would not work properly.

  I advise you to install the application again.

  Kind regards

  Sheena

• R50E installed new hard drive, laptop does not see...

  Hello

  Just installed a new hard drive, one old man went beyond repair, the disc is out of the package, I format, partition, but the laptop does not see...

  I wonder how I can do... I do not have the recovery disks, but I can get them if it will solve the problem

  Thks

  Thks for yr reply

  But the problem is solved, it was a hard drive defective, even if she was new out of the package, returned to the shop, tested found inoperative, replaced by another that everyone ok

  concerning

• Replaced the HARD drive, but can not reinstall the operating system

  Evening,

  I replaced the HARD drive on my laptop and used the sony recovery media kit, but the error message "can not configure windows to run on this hardware of computers.

  The HARD drive is a Toshiba of the same style and size. Sony sent me two sets of disks, I replaced the HARD drive twice still have exactly the same problem.

  Any ideas before using it as a target would be useful.

  Thank you

  C

  It is possible that the new hard drive, you bought are 4 k sectors and not 512 KB, which is necessary to make it work properly.  If you have a practical clean Windows installation disc that give a try and see if you encounter the same error...

• new hard drive, Wireless does not

  I had to install a new hard drive and reinstall windows 7 on my Pavilion dv6. I downloaded the drivers for the network card and you can get on the internet with wire connected. When I installed the drivers wireless I get compatibility box that says drivers have not installed correctly. Controller of net work shows no driver installed. Any help would be great...  I am running windows 7

  You are the very welcome.

  You need this driver for the PCI device.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-102202-1&cc=us&DLC=en&LC=en&OS=4063&product=5218502&sw_lang=

• New hard drive and try to reinstall the OS. Have discs of Hp recovery but fell in DVD player

  Hi all,

  I just put a new hard drive in my HP Dv7. I also ordered recovery disks. When I tried to put the disc in I discovered that my DVD drive is not working

  My question is can I transfer the recovery on a USB disk and then from there?

  I would be grateful for any ideas!

  Thank you in advance,

  Marc

  Don't know where you live, but any reputable computer store such as best buy, Staples, or even online at Amazon.com

• Installed Windows on a new hard drive with an old processor, the video controller, there are no drivers

  I have an old optiplex Gx280 dell and she had a damaged hard drive. I didn't need anything out of it so I got a new hard drive from Seagate internal tb and install a new copy of Windows 7 ultimate on it. I have updated all drivers for obtained with the exception of my video controller. Since then, I've used about 200 GB of space on it from the information that I want to keep, but apparently the drivers because this computer does not exist for windows 7. What should I do?

  Standard-Intel915G/915GV/910GL VGA graphics card
  Hardware acceleration is completely upward
  Dirctdraw, Direct 3D is not available

  If you can't find a driver update, you can try installing the driver in compatibility mode ' old'.  Simply right click the Installer do > properties > compatibility mode > choose OS

  Good luck

• How to install Win7 on new hard drive and still access all the files from the hard drives of previous Vista?

  I currently have a Windows Vista PC. It has two SATA drives, one with the operating system, the one I use for storage.

  I want to buy a new SATA hard drive and install a new copy of Windows 7 top.

  I want to know the steps to follow to do this. My plan is this:

  1. turn the pc power off and open the case.

  2. remove the old hard disks

  3. plug the new empty hard drive

  4. turn on the pc and the insertion of the disc to install to Win7 for DVD-ROM drive

  5. enter in the bios and put the DVD-ROM as first boot device

  6. install win 7 on new hard drive.

  Is this correct?

  Because my next question is important:

  7. Turning off the computer.

  8 reconnect the two old hard drives. New total number of SATA drives connected = three.

  Now when I restart the PC and login to Win 7, it lists two other drives as, for example, D:\ and E:\ readers?

  How can I make this work?

  Thank you very much!

  Thanks for your reply, but I don't want to dual boot. I just want to have the hard drive as the master drive Windows7 and the old two drives as slaves, where I can access files as the pictures and letters.

  Any help would be appreciated!

  Well, I would disconnect all drives hard current interns, then connect the new hard drive, reinstall Windows 7, re - attach the old readers as slaves and copy all the data you need to on the disc of Windows 7.

  See:

  How connect a SATA Hard Disk as a slave . eHow.com
  Single, master and slave drives and Jumpering

• hard drive installation / do not install the drivers before that I installed Vista

  I installed a new hard drive on my laptop and then installed my vista reinstallation cd before installing reinstalling drivers and utilities cd, and now some of my drivers are missing, especially for the wireless card, so I can't connect to internet / y at - it an easy solution for this?

  Install now and they will update those that are currently installed, or install the drivers, some of whom are misssing.

  Go to Device Manager by going to start / find and type Device Manager and enter and then double-click on the program icon that appears.  Check each device to a red x, yellow! or white?  These identify devices with problems probably (drivers, but also of conflict or something else).  Click on each for more details and troubleshooting tips.  If you need to get drivers, get the computer dealer or the manufacturer of the device or disc they provided but prompting directly from web site can be better because they may be more recent than those appearing on the disc. (NO Microsoft updates).  In fact, you must disable automatic updates in Windows Update driver as follows: http://www.addictivetips.com/windows-tips/how-to-disable-automatic-driver-installation-in-windows-vista/. Follow these steps to get the drivers: http://pcsupport.about.com/od/driverssupport/ht/driverdlmfgr.htm.  Once you have the drivers, you can install them via the Manager device as follows: http://www.vistax64.com/tutorials/193584-device-manager-install-driver.html.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Add the new hard drive, windows does not start now

  OK, ill be as specific as possible here

  Ive always had a few hard drives in my computer at all times

  A few days ago, I had problems with my windows 7 install that I tabled to the installation while I had all of my hard drives connected at installation time.

  2 days ago I decided to start over fresh with a windows 7 ultimate 64-bit. I also bought a new 64gig OCZ SSD for my OS.

  I disconnected all my drives except the SSD and performed a complete installation of windows 7 and all a well worked first go again.
  I then started to shut down my computer and adding a hard drive to the times and re starting and in ensuring that the drive letters came back how I got them I had on my previous built and changing them were nessisary.

  I installed my 5 drives in this case and the computer rebooted fine and everything was perfect until!

  installed hard drives
  1 SSD 64 GB
  2. 1.5 TB of storage
  3. 1.5 TB of storage
  4. 320 GB movies
  5. 320 GB games

  I copied all HDD 4. movies (only movies and music files) on disk 3.
  then I removed the hard drive of 4 and replaced by a new hard disk 1.5 TB and restarted the computer
  the computer starts very well and once loaded windows I coppied the movies and music of the new 1.5 TB hard drive back.

  now, I had

  installed hard drives
  1 SSD 64 GB
  2. 1.5 TB of storage
  3. 1.5 TB of storage
  4 movies 1.5 to
  5. 320 GB games

  This is were the problem started. I restarted my computer and it wouldn't start. He gets the message of realteck and just a cursor flashes and remains like that permanently.

  If I remove the sata cable to the back of the hard disc 4 the computer starts fine
  I can plug the cable in just before the windows screen comes up and the hard drive works fine and is FLEURIDAS and all.
  but leave it plugged during the start of what the computer does nothing

  things I've tried, I made sure all my boot priorities are pointing to the SSD drive
  I have turned all devices normal priming and the hard drive with the OS selected
  Ive made sure that all the drive letters are correct on each drive
  Ive tried to get started with the windows 7 CD to get to the repair section and I click Repair tool, start it recconises there is a problem but informs me it can not be fixed automatically and asks me if I want to send the information to microsoft (which me).

  It's really made me this one any help will be great and thanks in advance

  just in case sick leave my system specs

  EVGA X 58 mobo
  INTEL Core i7 940
  6 GB of corsair ram
  all hard drives, you know
  1000 watt power supply
  2 X PALIT GTX 295 but SLI is not currently connected

  Hi AUST_DeVinE,

  ·         Please give us the exact error that you receive when you plug the SATA cable?

  ·         After you connect the hard drive, are you able to boot in safe mode?

  Check if you are able to boot in safe mode. Link: start your computer in safe mode:

        http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  1. run chkdsk on this hard drive, follow the steps below and check, if it helps:

  i. connect the external hard drive

  II. starting the computer in the Windows recovery environment, you can check the link below: What are the system recovery options in Windows 7?

  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  III. run Chkdsk,

  Here are the steps to run chkdsk:

  i. in the command prompt window, type the following command and press enter Chkdsk/r X:

  II. Note: in this command, x is a placeholder that represents the drive letter of the volume you want to check.

  III. o press when you are prompted to check the drive the next time the system restarts.

  IV. restart the computer.

  Note: When you restart, Windows checks the drive for errors, and then Windows starts.

  Link, please refer to: Chkdsk: http://technet.microsoft.com/en-us/library/cc730714 (WS.10) .aspx 

  2. you can even format the hard drive and check if this can help, see the below link for the same: Formatting disks and drives: frequently asked questions: http://windows.microsoft.com/en-US/windows7/Formatting-disks-and-drives-frequently-asked-questions

  3 make sure you check the firmware updates and the updates of the system BIOS

  For updates and updates the system BIOS, contact the manufacturer of the hardware in the computer, refer to the following Web site:

  http://support.Microsoft.com/GP/vendors/en-us 

  Not even verify that the system BIOS correctly detects the hard disk

  For more information about how to verify that the system BIOS correctly detects the hard disk, contact the manufacturer of the computer hardware.

  BIOS WARNING: Change to the BIOS/complementary metal oxide semiconductor (CMOS) settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  Thank you, and in what concerns:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.