HP G62-149WM TROUBLESHOOTING SCREEN

Similar Questions

• HP G62-149WM MOTHERBOARD

  I need to replace my motherboard. Number of room so that it is 595184-001, but when I look up the same part number of HP Service & parts web page here shows them only saw 2 × 2.0 USB ports but mine has 3 × 2.0 USB ports... If anyone knows why this is or where I can find the motherboard correct for my HP G62-149WM, who made the 3 USB ports? Thank you in advance for your time and your help in this matter! Ron

  Here is the Manual:

  Repair manuals

  See page 4-33. The third USB port is on a daughterboard, not directly soldered on the motherboard. If the motherboard itself has just two usb ports on the left and the right one is on a small Board. When you replace the motherboard, you can reuse the daughter card to give you this third USB port.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• Upgrade the hard drive on my HP G62-149WM for a 750 GB,

  If I upgrade the hard drive on my HP G62-149WM to a 750 GB drive (or maybe a 1 to) and use the factory purchased the set of recovery disks, it will install the recovery (hidden) on the disk partition, or not?  What IS the recovery partition, it will install (if installed)?

  Oeagleo wrote:

  If I upgrade the hard drive on my HP G62-149WM to a 750 GB drive (or maybe a 1 to) and use the factory purchased the set of recovery disks, it will install the recovery (hidden) on the disk partition, or not?  What IS the recovery partition, it will install (if installed)?

  Hello

  You can certainly move to a 750 GB 5400 RPM HARD drive, a 1 TB would also be possible, but it is not listed as a compatible hdd in a service guide. After a reset, the laptop will be in the same condition that you used for the first time (OS preinstalled). The recovery partition is going to be on the hard drive as well. Size is not too large, I think that it would be up to 15-20 GB...

• HP G62 - 340US Black screen on power on, no corresponding led error code

  Hey all,.

  Having a problem with my laptop HP G62-340US. The computer will continue to feed on, but the screen does not light, but the caps lock light has a constant slow continuous flashing. The indicator light next to the charging port is orange, as the light next to the wireless button. (There is no NumLock on the keyboard of a light)

  I looked at the link to HP support for this issue, located here:

  http://support.HP.com/us-en/document/c01443366

  But was unable to find my specific situation. Any help or idea would be greatly appricieated.

  Thank you!

  Try to start the machine without the battery and connected to the power adapter. Try to boot the machine with a single chip memory installed (if you have two). Try changing the location of the chip memory if you don't have one. Do a hard reset by removing the battery, power adapter, pressing the power button for 1 minute, reconnect the battery and power adapter, and then try again. If this does not work, you will have a video chip problem that would require a reflow (I know this isn't your model, but it shows you what may be involved):

  http://www.YouTube.com/watch?feature=player_detailpage & v = bnkQNmKauEc #t = 4S

  Good shops use pistols temperature controlled at worst and stations Infra red reflow for more accurate results.  The video was just to give you an idea what may be wrong.

  http://www.YouTube.com/watch?feature=player_detailpage & v = wEVv7p - JDc #t = 8 S

• HP g62-b18SA troubleshooting corrupt Bios

  It is time I need help from an expert, I've got HP g62-b18sa laptop i3, I discovered the bios as having failed because the laptop turns on but no display, CAPSLOCK flashes twice an intervel punctually 3 laptop restart itself, after reading several Forum, I got the phoenix tool and the latest bios of hp g62-b18sa, I flashed the bios portable came in DOS for 2 seconds, then turn off. I knew I was getting there, but the problem I have is that my hurt? Expert please help...

  Thank you very much

  Now it is fixed, even if HP rep.  not forbear, I always appreciate their effort, I knew I was doing something wrong initially, today I woke up, look to the computer laptop and thought selling ebay because he was sitting there during a month, but I just saidto me Deplus, give it one last try.

  I insert the USB key containing the bios, laptop power, usually I hold windows key + B for 5 seconds, but this time I decided to keep it for ever, the back boring screen came upward, but to my surprise it stay for 10 seconds I just press ENTER immediately. What a laptop computer joke went into the HP BIOS UPDATE SCREEN

  https://www.Flickr.com/photos/65438897@N06/12880548984/

  then Flash started process, infact I was more than happy.

• Laptop HP G62-b20SA - black screen

  Dear,

  I had the laptop HP G62 - B20 just over the years towing. He just started a new problem. While the PC is running, the tunrns of the screen itself off automatically and the laptop turns off automatically shortly after. The timing is variable, sometimes 1 hour, 45 minutes, 1 hour and 15 minutes 40mins etc. Very annoying. Once off automatically, I the VHE to manually restart the laptop.

  Could someone help please? Thank you very much

  The types of events usually signals overheating.  The solution is to clean the inside of the laptop computer of dust requiring removal on the case (cover).  May make outside but not as effective.  If that intimidates the user can have a shop do it.  If cleaning does not resolve the problem, then it is already in the shop for repairs.

• G62-149wm: OS after you replaced the HARD drive

  I was good recently a laptop G62 with a hdd dead by a friend who did not feel it was worth the cost of repairs. I tell myself that I can put an ssd inside, and it will be a pretty decent laptop.  My problem concerns the operating system after that I do this. I have my own copy of Windows 7 (64 bit), but I read that the key for the original version on the dead hard drive is also on the bios for faster installation. And if you install a different version, it can cause problems with some versions of windows in some laptops. My question is can I use my copy of windows 7 or what I have to go through the trouble to use the key to laptops to burn another copy of the windows Web site. Possible stupid question but I want to know everything before you start this project.

  Hello

  This machine originally shipped with Windows 7, then you will be very well - injection of digital product keys started with Windows 8 - just install Windows 7 and enter your product key from the usual way.

  If necessary, original software and drivers are available on the following link.

  http://support.HP.com/us-en/drivers/selfservice/HP-G62-100-notebook-PC-series/4078809/model/4164687

  Kind regards

  DP - K

• Processor upgrade HP G62 - 227cl troubleshooting

  Hi, I recently got a HP G2 - 227 cl and I wanted to upgrade the RAM and processor. I have max of RAM, but my help to upgrade the processor AMD V120 2.2 GHz 25W to an AMD Phenom II Quad-Core CPU P960 HMP960SGR42GM 1.8 GHZ 25W failed. The processor was listed as compatible hardware. When I turn on the computer, the screen turns on and the Caps Lock key light flashes several times. I try updating the Bios to the latest version but that does not solve it... can you help me understand this? Thank you.

  Unfortunately, there is really no easy way to know what will work the processors. I will reiterate that a processor listed in the maintenance and service guide is not guaranteed to work as this is more than a general list processors that none of the G6 models could have been configured with.
  
  You can go to the HP surfpart, look for the motherboard and to review the list of products that came with this motherboard (an expandable list at the bottom). If you find a laptop that has this motherboard and processor you want, then the processor on this model would work more than likely in your system.

• HP g62-149wm webcam

  I would like to be able to turn on my webcam (with a click or two) to register myself so my son had memories of me after I pass but I don't know how to turn it on! I tried to type in QUICK PLAY after clicking on start (windows icon), but nothing shows up! So any help here would be much appreciated and I thank you in advance for your time and your help about this matter!

  Hi Ronnie!

  Please try this:
  Find and use the Webcam software that came with your computer

  If your computer is equipped with a built-in webcam, HP has preinstalled software that allows you to record and share video from webcam: Cyberlink YouCam, MediaSmart WebCam or TouchSmart Webcam. You can find these products of software on your computer as follows:
  1. Click Start to bring up the start menu.
  2. Enter one of the following words in the search field:
     • YouCam (for some desktop all-in-one PCs and many portable computers)

     • MediaSmart (for with many all-in-One desktop PC and laptop computers)

     • TouchSmart (for touchscreen PC)

  3. Click on the name of the software of the webcam from the list of search results. If the name of your software of the webcam does not appear in the list of search results, try to search again using one of the other names.
  4. What happens when you open the software?
     • If you can't find and open the webcam for your computer software, then go to the next step.

     • If you have found the software of the webcam, it opens and you see a picture, then finished. Your webcam works.

     • If you have found the software for the webcam, it opens, but you can't see the video in the main display window, restart the computer and try again. If the problem persists, use the section "Video does not appear in the webcam software '.

     ----------------------------------------------------------------------------------------------------

  I copied this from the HP support page: http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02452221&cc=us&dlc=en&lc=en&product=4164688&tmp_track_link=ot_search#N70
  In case, that the steps mentioned above, didn't help, just click on the support link and follow all the steps of troubleshooting!

  I hope that helps!

  See you soon
  Julia

• HP G62-149WM/updated software driver for card MicroSoft Virt.WiFi Miniport

  (OS = windows 7 Home Premium)   PROBLEM = IN DEV. MNGR. updated SOFTWARE (MICROSOFT VIRTUAL WiFi MINIPORT ADAPTER) a MESSAGE WINDOWS SURGIT IN SAYING some THING LIKE "IT DON'T RECOGNIZE the PUBLISHER OF THE DRIVER SOFTWARE", THEN ME GIVES OPTIONS to EACH UPDATE DRIVER any WAY OR BASICALLY NOT TOO... SO I GUESS MY QUESTION IS "HOW TO KNOW WHERE TO FIND THE RIGHT DRIVER FOR ABOVE MENTIONED ADAPTER IN ADDITION TO WITH AUTO WINDOWS." UPDATE? I'D APPRECIATE ANY HELP REGARDING THIS ISSUE AND I THANK YOU ALL IN ADVANCE!

  The Microsoft Virtual WiFi Miniport is a driver built into Windows 7 and should not need to be updated. The correct version of the pilot was installed when Windows 7 was installed and no new updates of this driver is necessary. If and only if, Microsoft has released the update of the driver, you are trying to install, you should install it. Please check the source of the driver before installing this doubtful driver.

  If you have any other questions, feel free to ask.

  Please click the White Star of KUDOS to show your appreciation

• HP G62 - black screen on power on

  Hello
  
  Having a problem with my laptop HP G62. The computer will continue to feed on, the screen does not light, but the light on the power button flashes. The indicator light next to the charging port is red, just like the light next to the button wireless.

  Thank you

  Anahit Serobyan

  Hello AnahitSerobyan,

  Thanks for posting on the HP Forums!

  I understand that the computer does not start correctly and remains a black screen. I apologize for the late reply, but I will do my best to help you! To resolve this problem, try the procedure described in this document from HP: Troubleshooting screen displays black with no. Error Messages at startup or start-up

  The document lists the useful steps begins with reset the product. More specific measures are explained according to your problem. I think that this troubleshooting will solve the problem. If this isn't the case, I would contact HP support by phone for help. You can use this Web site for information about how to contact HP properly, based on your region: Contact HP worldwide
  
  Please let me know if you have any questions or concerns. Thanks for posting on the HP Forums. Have a great day!
  
  Mario

• Cannot get past Boot Screen manufacturer

  I can't get my g62-149wm to go beyond the HP screen. I tried to hit escape to go into the boot options and f10 to enter the BIOS but nothing happens. It is blocked here. Anyone have any ideas?

  Do like me. I had to buy a SATA docking station, and then start on a live usb Sabayon linux (without the internal hdd is present) and back up all the data on my external hard drive. After the backup, I just formatted the internal hard drive and recovery DVDs to restore factory settings.

  You can also do a new installation or anything else you want because the laptop must be initiated with the hard drive in it. I don't have any other PC to make a back up so had to use this usb flash drive or a live cd (needs all flash usb plugged) with linux on it.

• Pavilion 15 n096ea: screen is black, no cursor no nothing!

  Hi, my wifi suddenly stopped working. Device Manager showed the Code 10. Drivers would not be up-to-date as I did a system restore to a point before the last automatic update to see if it changed anything. Restoration has been a mistake--I didn't get the message. Now computer laptop does not start on the desktop. Shows HP logo, and then black screen. No cursor, can not access safe mode, will not restart. Sometimes displays "the instruction at 0x40028e28 referenced memory at 0x00000000 memory can not be read". Hit ok = black again. Any thoughts? Thank you

  Hello @meerkat95,

  Welcome to the Forums of HP Support! It's a good place to find the help you need, so many other users, the HP experts and other members of the support staff.

  I understand that you are having a problem with your laptop won't start does not and wanted to help!

  Please see the following documents and let me know how it goes:

  Computers laptops HP - computer won't start (Windows 8)

  HP Notebook PC - troubleshooting screens black with no start-up or start-up error message

  Please let me know if this information has been helpful by clicking the thumbs up below.
  
  Kind regards!

• Computer Pavilion laptop will not turn on black screen

  Hello

  I just turned on my computer laptop pavilion dv6 (almost three years), and it does not start. Instead, I got a blackscreen.

  The capital block and the keypad lights turn on and off all the time, but I can't do anything. I can't enter the bios, the recovery or anything like that. My computer just seems to be in limbo, and I can only turn it off by pressing the power button.

  I have windows 7.

  Thank you very much for your support

  Hello cristiaan4,

  Welcome to the HP Forums! I hope you enjoy your stay.

  I understand your computer screen is blank and there are LED turn signals. I will do my best to help you, and I apologize for the delay.

  To fix this, I encourage you to please try the steps outlined in this document from HP: Troubleshooting screen displays black with no. Error Messages at startup or start-up

  This document you will help idenfying the source of the problem and can suggest many corrections. I believe that the problem can be solved by trying these steps. If this is not the case, the computer doesn't have a hardware problem. To remedy, please contact HP telephone support. You can use this Web site for information about how to contact HP properly, based on your region: Contact HP worldwide

  I hope this information helps you. Please let me know your results. Thanks for posting on the HP Forums. Have a great day!

  Mario

• Pavilion g7: screen Hp Pavilion g7 black boot, no line

  Hello

  I've had my laptop since now almost 2.5 years. Last week, I went to turn it on and after pressing the power button, the screen lit up like it normally would, but the hp logo never appeared. I waited for about 10 minutes onscreen black before force a shutdown and try again, without success. I tried everything to leave his execution for more than an hour trying a hard reset to try to put it in SafeMode with no result. I never get anything other than the black screen. I know the screen is activated, because you can see that it turns on, I don't know if that makes a difference. Help, please! Thank you.

  Hello @AlecE,

  Thank you for visiting the HP Forums! A place where you can find solutions for your problems, with the help of the community!

  I stumbled upon your post on the black screen when starting, and he wanted to help!

  As it may help to solve the problem for you, see the following document:

  HP Notebook PC - troubleshooting screens black with no start-up or start-up error message

  Please let me know if this information has been helpful by clicking the "thumbs up" below.

  Kind regards!