HP HDX 16 Flex show

Similar Questions

• FLEX - localhost began to appear in the browser but Network Monitor says otherwise

  Hello

  Today, I ran my FLEX application in FireFox and noticed that he was showing "transfer data to localhost...". "at the bottom of the browser. Originally, it would show my IP server, not localhost.

  I watched the network monitor and check that network traffic is NOT localhost, but my server IP address.

  Here are the screenshots to prove that I am only partially crazy! :

  

  ↑ This is the problem...

  

  ^ Network Monitor shows that it hits the correct server IP here...

  This, everyone knows or knows why this is happening?

  I dug into the parameters of the project file and looked for localhost but couldn't find it anywhere. Not sure where that would be defined?

  
  I'm trying to clean up Firefox, which I think could be my problem, , but was curious to know if anyone has had their start of sudden app FLEX showing localhost calls in the browser status bar?

  Hi Devtron

  I bet that Flash Builder Network Monitor works exactly like charles webdebugger.

  What it does is to set up a proxy on localhost and game to configure the proxy server to your system, so all the traffic on your network goes on the proxy, and then the proxy is the inspection of data network. Then it would make sense that your browser displays localhost because data are extracted through this proxy.

  Best regards

  Martin

• How to create a SWC file in flex

  Can someone help me providing step by step information how create .swc file in flex... IAM a starter to this... Pls answer

  We have a screencast that covers a series of videos The Flex Show:

  http://www.theflexshow.com/blog/index.cfm/2009/3/2/the-Flex-show--creating-Flex-components--episode 1 Project Setup

• BlackBerry Smartphones BlackBerry does not recognize the headset/Bluetooth headset

  I am posting this as a new message. I had earlier posted it as one 'response' to another post with a similar problem. I hope that it is acceptable (new Member of the Forum).

  My 8700 c won't recognize a headphone SoundPort Flex. The helmet worked perfectly until three days ago. My 8700 transfer calls to the headset correctly. The led at the upper right of the device will begin to blink blue. The screen of the device would show "call forwarding - busy," I would like to hear a "beep" in the headset, press the main button in the headset and I'd hear the person calling in the atrium. Same result if I put out the call. All of a sudden stopped the transfer process. I thought that I may have made a change by mistake in the Options but have not been able to figure out what I could have done wrong.

  My first thought was that it might be the helmet. I tried a headphone SoundPort Flex new, different and still no connection between the BB and headset.

  I followed the implementation of manual of BB. Here is what the screen shows when I implemented: "searching for devices. Search SoundPort Flex. Guest of the screen "enter the password for SoundPort Flex". I entered the password and click on the wheel. Hear "beep" in the headphones! Display shows "Devices paired like SoundPort Flex." Entry "Connect" screen displays "Waiting for SoundPort Flex." (The screen never changes and displays "Waiting... ("indefinitely.)

  By the end the other user in a similar message, under Options, my 8700 watch 'Discoverable' as selected.

  Bluetooth is turned "on".

  Under "Device properties", I selected "approved."

  The 8700 c (online) user manual reads: "Set if the paired Bluetooth compatible device can connect with your BlackBerry® device without asking confirmation." I don't find that Option on my device. Is the problem that the BB is ready to connect somehow manually?

  One last thing: within the "Bluetooh activated/paired devices/SoundPort Flex / properties of the device"-when I click on the knob to display "Device properties", I see that these items: name of the device (SoundPort Flex), trust (Yes), encryption (Enabled) control Echo (automatic). Below "automatic" on the screen is a horizontal line and below who are 'Services '. It is not accessible. But it lists 'Hands-free device' (twice) and then "helmet" (twice). None of these elements can scroll.

  I guess ill-informed, I accidentally turned on or off another Option that overcomes the connection between the BB and the headphones. Or maybe a software problem?

  Note: I just tried the whole process over again: removed the headphone SoundPort, disabled the Bluetooth then he allowed. I see the device right now, the corresponding LED flashes blue, the display shows "Waiting for Flex SoundPort, ' Flex SoundPort light flashes blue and, in the window"Bluetooth", active the" paired devices/SoundPort Flex shows BlackBerry as it is connected to the headset. " However, I've heard the "beep" as on the previous attempt to connect. And for control of voice mail, the phone works fine but still no transfer to the headset.

  Any suggestions are appreciated. Thank you. Bret

  
  

• Item Renderer display optimization

  I pretty basic line item converter displayed within a group of data, it is composed of a few labels and an icon. There a a few nested to display everything properly, but I it would not consider a layout that is complicated by all means.

  Whenever I have show a result set, 20 rows of data, it seems that stifles Flex showing makes it point. It takes about half a second from the moment where all makes them point have been created to actually draw on the screen and the Flex code that handles the drawing seems to hang, because everything on the screen freezes during this period of the second half. This blocking becomes an application rich very fluid display in a mess agitated as soon as the results are displayed.

  I went far away to make sure that none of my code blocks and I always give Flash Player the room he needs to breathe to maintain its rate setting, however I'm stuck with this display problem. Any suggestion would be appreciated.

  At first glance, I count 1 BorderContainer, 7 groups and about 8-10 additional subclasses of UIComponent. That's a lot for an MXML itemRenderer past. The sad truth seems to be that MXML is just not effiecient, nor promote the design effiecient. It seems that Adobe has already abandoned MXML completely from his Mobile for pure AS3 envelopes, if it's no idea.

• Modal alert waiting for the user, click

  Hello

  I used program InDesign plugins in C++. There are modal alert with YES/NO buttons, which stops execution until the user presses one of the buttons.

  Now to my question. I know that this alert does exist here in Flex. Flex shows alert and continues with the execution of the following code. I know that there is closeHandleFunction that I should use to deal with. ActionScript is the language of piloted by events and we should use ActionScript in this regard. So my question is perhaps more hypotetical. Is very bad idea to create this category MyAlert who wait in a loop up to push the button? You know, sometimes, it would be useful to have this alert.

  Thank you

  pyso

  There is probably a better way to do this. I think that spring actionscipt provides tools to do such things, and it would be nice to be able to do it without tips...

  In any case, I was thinking about an alternative, something like this:

  private var i:int;
  
  private function lookForDisplayObjectsToRemove():void {
       for ( j:int = i ; i < whatEverYouIterateOn.lenght ; j++ ) {
            if ( /* condition to remove object here */ ) {
                 i = j;
                 var popUp:YourYesOrNoPopUp; // pop your yes or no alert here
                 popUp.displayObjectToRemove = whateverYouIterateOn[j];
                 popUp.functionOnYesClick = removeDisplayObject;
                 popUp.functionOnNoClick = lookForDisplayObjectsToRemove;
                 return;
            }
       }
  }
  
  private function removeDisplayObject( object:DisplayObject ):void {
       // remove object here
       lookForDisplayObjectsToRemove();
  }
  

• WebService invocation - variable @namespace errro

  Hello
  
  I get the below error. (Variable @namespace is not defined)
  
  I don't know of webservices, I just try to access a WSDL file of
  Flex. Can you please let me know why Flex shows this error? On which
  is he waiting for a namespace. The WSDL file, I use already
  has a targetNamespace.
  
  Even if I don't call all the Web service methods, I get this error.
  
  Even if I do after it gives me error. That is to say, it's probably
  Tyring to invoke the Web service and check it out.
  
  "< mx:WebService id ="webService"wsdl =" http://someurl?wsdl "> "
  < name mx:operation = "getData".
  result = "resultHandler (Event); »
  Fault = "MX. Controls.Alert.Show (Event.Fault.FaultString); "/ >
  < / mx:WebService >
  Thanks in advance.
  
  Kind regards
  Neha
  
  
  ReferenceError: Error #1065: Variable @namespace is not defined.
  to
  MX. RPC.xml::SchemaLoader/schemaImports() [E:\dev\3.0.x\frameworks\projects\rpc\sr\
  \
  c\mx\rpc\xml\SchemaLoader.as:102]
  to
  MX. RPC.wsdl::WSDLLoader/schemaImports() [E:\dev\3.0.x\frameworks\projects\rpc\src\
  \
  \mx\rpc\wsdl\WSDLLoader.as:253]
  to
  MX. RPC.wsdl::WSDLLoader/resultHandler() [E:\dev\3.0.x\frameworks\projects\rpc\src\
  \
  \mx\rpc\wsdl\WSDLLoader.as:162]
  at flash.events::EventDispatcher/dispatchEventFunction()
  at flash.events::EventDispatcher/dispatchEvent()
  to
  MX. RPC::AbstractInvoker / http://www.adobe.com/2006/flex/mx/internal:dispatchRpcE\
  \
  vent() [E:\dev\3.0.x\frameworks\projects\rpc\src\mx\rpc\AbstractInvoker.as:168]
  to
  MX. RPC::AbstractInvoker / http://www.adobe.com/2006/flex/mx/internal:resultHandle\
  \
  r() [E:\dev\3.0.x\frameworks\projects\rpc\src\mx\rpc\AbstractInvoker.as:191]
  to
  MX. CPP [E:\dev\3.0.x\frameworks\projects\rpc\src\mx\rpc\Respo\::Responder/Result()
  \
  nder. As:41]
  to
  MX. CPP [E:\dev\3.0.x\frameworks\projects\rpc\src\mx\r\::AsyncRequest/acknowledge()
  \
  pc\AsyncRequest.as:74]
  to
  DirectHTTPMessageResponder / completeHandler ([E:\dev\3.0.x\frameworks\projects\rp\)
  \
  c\src\mx\messaging\channels\DirectHTTPChannel.as:381]

  I had to add following and he gets rid of the error:

  = request.getOperation ("getData") of operation: var operation as operation; Operation.mx_internal::wsdlOperation.style = 'document '.

• [ASDoc] How to document the events?

  Hello!
  
  I am facing a problem and maybe you can help me.
  
  I have two doubts:
  
  (1) how can we document an event using ASDoc tool? I tried the @eventType documentation and used the event meta tag, but it does not include only the event on the Documentation.
  
  (2) when I type "addEventListener ("the Flex content assist popup with all avaiable in this class." What should I do to include my own custom on this wizard of content events? For example: I have a class named MyClass that distributes MyEvent. I would like it when I type 'addEventListener' on an instance of MyClass, the Flex show "MyEvent.CHANGE" on content Wizard.
  
  
  Thank you!
  CaioToOn!

  Resolved to Ultrashock Forum by Nutrox.

• How do I Center Align Alert.show () in flex

  Hi all

  I have a great Flex application that uses Alert.show () to display error/warning messages. This created problems when the error messages have been focused on the screen, but not visible when the screen is in a position of extreme scrolling (up or down). is it possible that I can display the alert in the center of the visible page of the user. I tried what follows, but did not work.

  var errorMsg:Alert = Alert.show("Error message"); 
  PopUpManager.centerPopUp(errorMsg);

  Thanks in advance.

  It depends on what the scroll.  centerPopUp() focuses on the scene.  If the step is larger than the display window and scrolls, you need to know about the viewport.  If the window is the browser, you might be able to get information about the viewport via ExternalInterface

• Flex in a week: run the mxml, but nothing shows

  Hello

  I do the flex in a week course. Pain in the ass to see the design mode is gone but good no worries.

  In any case, I run the mxml and nothing shows. I also ran the swf that was produced and Yes - empty. However, the code seems fine so I am confused.

  < / s:Application >

  <? XML version = "1.0" encoding = "utf-8"? >

  " < = xmlns:fx s:Application ' http://ns.Adobe.com/MXML/2009 "

  xmlns:s = "library://ns.adobe.com/flex/spark".

  xmlns:MX = "library://ns.adobe.com/flex/mx".

  minWidth = "955" = "850" minHeight >

  <!-exercise 1.01: implementation of your project-> files

  <!-- Styles ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -->

  < fx:Style source = "Styles.css" / >

  <!-- Script ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -->

  <!-statements ~ ~ ~->

  < fx:Declarations >

  <! - Place non-visual elements (e.g., services, items of value) here - >

  < / fx:Declarations >

  <!-UI components ~ ~ ~->

  < s:Label x = "10" y = "34".

  width = "690" height = "40".

  Text = "" Employee Portal: vehicle request form ""

  styleName = "titleHeader" / >

  < s:Form x = "10" y = "70" >

  < s:FormItem label = "employee:" >

  < s:DropDownList / >

  < / s:FormItem >

  < s:FormItem label = "office phone:" >

  < s:TextInput / >

  < / s:FormItem >

  < s:FormItem label = "Mobile phone:" >

  < s:TextInput / >

  < / s:FormItem >

  < s:FormHeading label = "Dates" / >

  < s:FormItem label = "pickup Date:" >

  < mx:DateChooser / >

  < / s:FormItem >

  < s:FormItem label = "Date of return:" >

  < mx:DateChooser / >

  < / s:FormItem >

  < s:FormItem >

  < s:Button label = "Submit Request" / >

  < / s:FormItem >

  < / s:Form >

  Are you sure that you run the mxml right? A few time to create a new also helps. Sometimes templates html (js files) are absent from this cause an error javascript and nothing to load. Usually, the own generation project done. If you right click on the generated swf file that shows?

• PDF portfolio SDK Setup - Assistant project Navigator in Flex Builder 4.6 does not show

  Hello, Experts
  
  I am trying to build PDF Custom Navigator using the SDK Adobe PDF portfolio; However, for some reason when you perform step 3 of the installation, Assistant project Navigator in Flex Builder (4.6) don't show up;
  
  The plugins has been extracted from:
  C:\Program Files\Adobe\Adobe Flash Builder 4.6\eclipse\plugins
  
  The NavigatorSupport file was extracted from:
  
  C:\Program Files\Adobe\Adobe Flash Builder 4.6\eclipse and (just in case)
  
  C:\Program Files\Adobe\Adobe Flash Builder 4.6\
  
  any advice would be greatly appreciated
  
  Best regards
  -Alex

  According to the recommendation of Joel, utilisΘ 4.5 - which works perfectly

• Novice question: InDesign show bad UI Flex

  Hi, I'm little to Flex as well as this forum.

  I create a new project of Extension CS from scratch for InDesign CS5, it generates a display dummy for good original project but now I want to create the UI according to my condition so I'm editing this mxml file and adding new components instead of default components created by the default code generator but when I run the project it always shows the default UI instead of project that I modified.

  I am sure that I am ignorant of something and almost all extension CS programmers would have seen it pritty so could someone give me the right way?

  Thanks in advance

  Mac

  There is your problem.

  You must set the name of the swf file in the manifest.

  

  "Attach as" is available by right-clicking on your project.

  

• Flex 3: showing a progress bar during the Application loading time

  Hello

  I have 3 end Flex before Application.

  Currently, at the beginning of the Application, its shows a blank white page.
  I want to have a progress bar on this effect.

  I saw this thing

  < mx:ProgressBar id = "progressBar" minimum maximum = "100" = "100" = "manual" mode
  Label = "5%" labelPlacement = 'bottom' x = '207' y = '299' >
  < / mx:ProgressBar >

  I saw an example of using ProgressBar with Image, providing the source of the image of the ProgressBar?

  Could any body please let me know as how to provide my < mx:Application > as a source for this
  ProgresBar.

  Help, please.

  Thank you.

  Here's a brand preloader component that I created that allows you to have the text and image in the proloader:

  ---com/stardustsystems/preloader/BrandedPreloader.as---

  package com.stardustsystems.preloader
  {
    import flash.display.DisplayObject;
    import flash.geom.Rectangle;
    import flash.text.TextField;
    import mx.graphics.RoundedRectangle;
    import mx.preloaders.DownloadProgressBar;
  
    public class BrandedPreloader extends DownloadProgressBar{
      private var _title:String = "DEFAULT APPLICATION TITLE";
      private var _titleObj:TextField;
      private var _titleX:Number = 80;
      private var _titleY:Number = 15;
      private var _titleWidth:Number = 165;
      private var _titleHeight:Number = 32;
      private var _titleTextColor:Number = 0xFFFFFF;
      private var _marquee:String = "DEFAULT MARQUEE";
      private var _marqueeObj:TextField;
      private var _marqueeX:Number = 80;
      private var _marqueeY:Number = 80;
      private var _marqueeWidth:Number = 165;
      private var _marqueeHeight:Number = 32;
      private var _marqueeTextColor:Number = 0xFFFFFF;
      private var _logoX:Number = 15;
      private var _logoY:Number = 15;
      private var _borderRectX:Number = 0;
      private var _borderRectY:Number = 0;
      private var _borderRectWidth:Number = 260;
      private var _borderRectHeight:Number = 120;
      private var _borderRectCornerRadius:Number = 4;
      private var _labelRectX:Number = 80;
      private var _labelRectY:Number = 55;
      private var _labelRectWidth:Number = 165;
      private var _labelRectHeight:Number = 16;
      private var _barRectX:Number = 80;
      private var _barRectY:Number = 72;
      private var _barRectWidth:Number = 165;
      private var _barRectHeight:Number = 6;
      private var _barRectCornerRadius:Number = 0;
      private var _barFrameRectX:Number = 80;
      private var _barFrameRectY:Number = 73;
      private var _barFrameRectWidth:Number = 165;
      private var _barFrameRectHeight:Number = 4;
  
      // The logo file should be in the same directory as this file.
      // Embed the logo file because using Loader is not efficient,
      //   because a Loader would load with the application, and we
      //   need it to load before the application, because it is
      //   displayed in the preloader.
      [Embed("SDSLogo1.png")]
      [Bindable] public var logoCls:Class;
      private var logoDO:DisplayObject;
      // Config file allowing configuration of various areas of the preloader.
      [Embed("config.txt", mimeType="application/octet-stream")]
      [Bindable] public var configCls:Class;
      private var configObj:Object;
      private var configProps:Object;
  
      public function BrandedPreloader(){
        super();
        // Load the config file.
        configObj = new configCls();
        // Parse the config property key/value pairs.
        configProps = getConfigProps(configObj.toString());
        // Apply the config properties.
        applyConfiguration();
      }
  
      private function applyConfiguration():void{
        if(configProps.title){
          _title = configProps.title;
        }
        if(configProps.marquee){
          _marquee = configProps.marquee;
        }
        if(configProps.titleX){
          _titleX = configProps.titleX;
        }
        if(configProps.titleY){
          _titleY = configProps.titleY;
        }
        if(configProps.titleWidth){
          _titleWidth = configProps.titleWidth;
        }
        if(configProps.titleHeight){
          _titleHeight = configProps.titleHeight;
        }
        if(configProps.titleTextColor){
          _titleTextColor = configProps.titleTextColor;
        }
        if(configProps.marqueeX){
          _marqueeX = configProps.marqueeX;
        }
        if(configProps.marqueeY){
          _marqueeY = configProps.marqueeY;
        }
        if(configProps.marqueeWidth){
          _marqueeWidth = configProps.marqueeWidth;
        }
        if(configProps.marqueeHeight){
          _marqueeHeight = configProps.marqueeHeight;
        }
        if(configProps.marqueeTextColor){
          _marqueeTextColor = configProps.marqueeTextColor;
        }
        if(configProps.logoX){
          _logoX = configProps.logoX;
        }
        if(configProps.logoY){
          _logoY = configProps.logoY;
        }
        if(configProps.borderRectX){
          _borderRectX = configProps.borderRectX;
        }
        if(configProps.borderRectY){
          _borderRectY = configProps.borderRectY;
        }
        if(configProps.borderRectWidth){
          _borderRectWidth = configProps.borderRectWidth;
        }
        if(configProps.borderRectHeight){
          _borderRectHeight = configProps.borderRectHeight;
        }
        if(configProps.borderRectCornerRadius){
          _borderRectCornerRadius = configProps.borderRectCornerRadius;
        }
        if(configProps.labelRectX){
          _labelRectX = configProps.labelRectX;
        }
        if(configProps.labelRectY){
          _labelRectY = configProps.labelRectY;
        }
        if(configProps.labelRectWidth){
          _labelRectWidth = configProps.labelRectWidth;
        }
        if(configProps.labelRectHeight){
          _labelRectHeight = configProps.labelRectHeight;
        }
        if(configProps.barRectX){
          _barRectX = configProps.barRectX;
        }
        if(configProps.barRectY){
          _barRectY = configProps.barRectY;
        }
        if(configProps.barRectWidth){
          _barRectWidth = configProps.barRectWidth;
        }
        if(configProps.barRectHeight){
          _barRectHeight = configProps.barRectHeight;
        }
        if(configProps.barRectCornerRadius){
          _barRectCornerRadius = configProps.barRectCornerRadius;
        }
        if(configProps.barFrameRectX){
          _barFrameRectX = configProps.barFrameRectX;
        }
        if(configProps.barFrameRectY){
          _barFrameRectY = configProps.barFrameRectY;
        }
        if(configProps.barFrameRectWidth){
          _barFrameRectWidth = configProps.barFrameRectWidth;
        }
        if(configProps.barFrameRectHeight){
          _barFrameRectHeight = configProps.barFrameRectHeight;
        }
      }
  
      private function getConfigProps(configStr:String):Object{
        var retVal:Object = new Object();
        var linesArray:Array = configStr.match(/".*"/g);
        for each(var line:String in linesArray){
          line = line.substring(1,line.length-1);
          if(line != "0"){
            var parts:Array = line.split("$$$");
            if(parts.length==2){
              retVal[parts[0]] = parts[1];
            }
          }
        }
        // trace for debugging
        for(var key:String in retVal){
          //trace("key: " + key);
          //trace("value: " + retVal[key]);
        }
        return retVal;
      }
  
      override protected function createChildren():void{
        super.createChildren();
        // Attach the logo image.
        logoDO = new logoCls();
        logoDO.x = (stageWidth/2)-(borderRect.width/2)+_logoX;
        logoDO.y = (stageHeight/2)-(borderRect.height/2)+_logoY;
        addChild(logoDO);
  
      // Attach the title TextField.
      _titleObj = new TextField();
      _titleObj.x = (stageWidth/2)-(borderRect.width/2)+_titleX;
      _titleObj.y = (stageHeight/2)-(borderRect.height/2)+_titleY;
      _titleObj.width = _titleWidth;
      _titleObj.height = _titleHeight;
      _titleObj.selectable = false;
      _titleObj.defaultTextFormat = super.labelFormat;
      _titleObj.htmlText = _title;
      _titleObj.multiline = true;
      _titleObj.wordWrap = true;
      _titleObj.textColor = _titleTextColor;
      this.addChild(_titleObj);
    // Attach the marquee TextField.
      _marqueeObj = new TextField();
      _marqueeObj.x = (stageWidth/2)-(borderRect.width/2)+_marqueeX;
      _marqueeObj.y = (stageHeight/2)-(borderRect.height/2)+_marqueeY;
      _marqueeObj.width = _marqueeWidth;
      _marqueeObj.height = _marqueeHeight;
      _marqueeObj.selectable = false;
      _marqueeObj.defaultTextFormat = super.labelFormat;
      _marqueeObj.htmlText = _marquee;
      _marqueeObj.multiline = true;
      _marqueeObj.wordWrap = true;
      _marqueeObj.textColor = _marqueeTextColor;
      this.addChild(_marqueeObj);
      }
      // Determines the dimensions of the large rectangle for the preloader.
      override protected function get borderRect():RoundedRectangle{
        return new RoundedRectangle(_borderRectX, _borderRectY, _borderRectWidth, _borderRectHeight, _borderRectCornerRadius);
      }
      // Determines the dimensions of the rectangle for the "loading..." and "initializing..." string.
      override protected function get labelRect():Rectangle{
        return new Rectangle(_labelRectX, _labelRectY, _labelRectWidth, _labelRectHeight);
      }
      // Determines the dimensions of the rectangle for the preloader bar.
      override protected function get barRect():RoundedRectangle{
        return new RoundedRectangle(_barRectX, _barRectY, _barRectWidth, _barRectHeight, _barRectCornerRadius);
      }
      // Determines the dimensions of the frame rectangle for the preloader bar.
      override protected function get barFrameRect():RoundedRectangle{
        return new RoundedRectangle(_barFrameRectX, _barFrameRectY, _barFrameRectWidth, _barFrameRectHeight);
      }
    }
  }
  

  ---com/stardustsystems/preloader/config.txt---

  # Comments in this file should start with #
  # Entries in this file should be formatted as follows:
  #    - enclose entries in standard double-quotes (not locale specific double-quotes)
  #    - do not use double quotes within the entries (use single quotes)
  #    - entries are key/value pairs, with key and value separated by $$$
  #    - keys and values can only contain characters in ISO-8859-1 (English and latin characters)
  # The file should be saved in Windows ansi encoding. To support characters in other
  #   character sets, further enhancement is necessary.
  # config properties for the application title string
  "title$$$Image Browser"
  "titleX$$$80"
  "titleY$$$15"
  "titleWidth$$$165"
  "titleHeight$$$32"
  "titleTextColor$$$0xFFFFFF"
  # config properties for the application marquee string
  "marquee$$$Stardust Systems Application"
  "marqueeX$$$80"
  "marqueeY$$$80"
  "marqueeWidth$$$165"
  "marqueeHeight$$$32"
  "marqueeTextColor$$$0xFFFFFF"
  # config properties for the logo x and y
  "logoX$$$15"
  "logoY$$$15"
  # config properties for the border rectangle
  "borderRectX$$$0"
  "borderRectY$$$0"
  "borderRectWidth$$$260"
  "borderRectHeight$$$120"
  "borderRectCornerRadius$$$4"
  # config properties for the label rectangle
  "labelRectX$$$80"
  "labelRectY$$$55"
  "labelRectWidth$$$165"
  "labelRectHeight$$$16"
  # config properties for the preloader bar rectangle
  "barRectX$$$80"
  "barRectY$$$72"
  "barRectWidth$$$165"
  "barRectHeight$$$6"
  "barRectCornerRadius$$$0"
  # config properties for the preloader bar frame rectangle
  "barFrameRectX$$$80"
  "barFrameRectY$$$73"
  "barFrameRectWidth$$$165"
  "barFrameRectHeight$$$4"
  

  -BrandedPreloader.mxml-

  ----------------- states.xml -----------------

  If this post answers your question or assistance, please mark it as such. Thank you!

  http://www.stardustsystems.com
  Adobe Flex development and Support Services

• Flex Date time axis not showing the correct values

  <? XML version = "1.0" encoding = "utf-8"? >

  " < = xmlns:fx s:Application ' http://ns.Adobe.com/MXML/2009 "

  xmlns:s = "library://ns.adobe.com/flex/spark".

  xmlns:MX = "library://ns.adobe.com/flex/halo" width = "700" height = "500" >

  < fx:Declarations >

  <! - Place non-visual elements (e.g., services, items of value) here - >

  < / fx:Declarations >

  < fx:Script >

  <! [CDATA]

  import mx.collections.ArrayCollection;

  [Bindable]

  public var stockDataAC:ArrayCollection = new ArrayCollection ([] collection

  {date: "2005, 7, 27 ', nearby: 41,71},.

  {date: "2005, 7: 28", narrow: 42.21},.

  {date: "2005, 3: 29", narrow: 42.11},.

  {date: "2005, 1, 1 ', nearby: 42.71},.

  {date: "2005, 10, 2", nearby: 42.99},.

  ([ {date: "2005, 9, 3 ', nearby: 44}]);

  public void myParseFunction(s:String):Date {}

  / / Get an array of strings to the last comma-separated string.

  var a: Array = s.split(",");

  / / Create the new Date object. Subtract one from the month property.

  / / The month property is zero-based in Date constructor.

  var newDate:Date = new Date(a[0],a[1]-1,a[2]);

  return Nouvelle_date;

  }

  ]]>

  < / fx:Script >

  < mx:Panel title = "Example DateTimeAxis" height = "100%" width = "100%" >

  < mx:LineChart id = "mychart" height = "100%" width = "100%".

  paddingRight = paddingLeft = "5" '5 '.

  showDataTips = "true" dataProvider = "{stockDataAC}" >

  < mx:horizontalAxis >

  < mx:DateTimeAxis dataUnits = 'days' parseFunction = "myParseFunction" / >

  < / mx:horizontalAxis >

  < mx:verticalAxis >

  < mx:LinearAxis baseAtZero = "false" / >

  < / mx:verticalAxis >

  < mx:series >

  < yField = mx:LineSeries 'close' xField = "date" displayName = "AAPL" / >

  < / mx:series >

  < / mx:LineChart >

  < / mx:Panel >

  < / s:Application >

  the code above shows opposite values from date to date axis it is to say it should show 01/05 2 / 05 / 3 / 05 4/05 but its display 10/05 09/05 08/05 07/05 on the date axis.

  Help, please.

  I saw this bug on Adobe's JIRA so nothing much you can do for now DateTimeAxis is quite bugged.

  In passing, is it me or mx:datavisu is on the low priority these days? Maybe the team working on a version of spark?

  https://bugs.Adobe.com/jira/browse/FLEXDMV-2231

• OSMF in Flex: (autoPlay = false) does not show 1 Frame

  I create a mediaElement and mediaPlayer, mediaContainer exactly like in the osmf_dev_guide.pdf documentation. The only difference is that I addChild to a UIComponent since I am in Flex.

  mediaFactory = new DefaultMediaFactory();
  mediaElement = mediaFactory.createMediaElement (new URLResource (VIDEO_URL));

  
  mediaPlayer = new MediaPlayer();
  mediaPlayer.autoPlay = false;
  mediaPlayer.media = mediaElement;

  mediaContainer = new MediaContainer();
  mediaContainer.addMediaElement (mediaElement);

  myMxUiComp.addChild (mediaContainer);

  The problem is with the mediaPlayer in bold block. What I expect is a mediaPlayer paused with the first broadcast of the image. What I get is a videoPlayer suspended with a white/white frame (as if the mediaElement has not yet loaded in mediaPlayer).

  If I move the line of automatic game down to maybe make sure the mediaElement has loaded into the player, as then, it gets dropped and the video just autoplays and charges as if autoPlay = false is not there.

  mediaPlayer = new MediaPlayer();
  mediaPlayer.media = mediaElement;

  mediaPlayer.autoPlay = false;

  as if we did it:

  mediaPlayer = new MediaPlayer (mediaElement);

  mediaPlayer.autoPlay = false;

  I think sandwitching autoPlay = false in the Middle, as shown in the documentation, is the way to go, because I think that he made sure the player is suspended before the insertion of any media (before the mediaElement is assigned). But he would still get the first frame of the video showing, otherwise, it seems confusing to the user.

  Thank you

  David

  The autoPlay property is not retroactive, so if you set autoPlay after setting the MediaElement on the MediaPlayer, then he won't have an effect.

  The reason why you get the first image when loading of the fake video with autoPlay is OSMF adopts a cautious approach to the media loading.  If we were to show the first default image, then we trigger the download (for progressive video) or connect to the stream (for release).  In both cases, these actions could trigger "views false' on the side server, we have heard many clients is something to avoid.

  In addition, in many cases, the first frame of a video is uninteresting (e.g. no black background image), so it makes more sense to display a poster canned frame.  We experimented with some techniques to achieve this in our example application player example (see examples of "Poster frame" and "RTMP Poster Frame").  Demo is here, source is here.

  Finally, I would add that the behavior you're looking for is considered as desirable enough for the video Flex component (which is based on OSMF) that they have added native support.  So, you might also consider looking at their component (Flex 4) for video.