HP jet desktop all in one 4500

Similar Questions

• HP Office Jet J6480 All In One - will not analyze with Mac OS 10,8.3

  I could not get my HP Office Jet J6480 All In One scanner after upgrading to 10.8.3.I followed other positions and have installed the most up to date driver (http://support.apple.com/kb/DL907) , but whenever I try to scan from the HP Device Manager or photosmart studio, it says "sorry, scanner could not be initialized. (scanner not found) "I tried to make sure there is no other updates by clicking settings in the Device Manager by clicking on check the updates but it says 'server not available - service software is currently not available. "Please try again later" and I got this error for the last week.

  I followed the second set of instructions available here: http://h30434.www3.hp.com/t5/Mac-Printing-and-Scanning/HP-Software-Update-Server-Unavailable/td-p/18... to try to resolve this problem and install the software found on the link. I restarted my computer and I always meet the same problem.

  Note: My printer is wireless and I have not hooked by a cable. Will make a difference?

  My printer seems to be printing very well.

  Thanks for any help you can provide.

  Sara

  To add, both HP Device Manager or photosmart studio are part of the software and not designed for Mac OS X 10.8 10.5.

  Here are the steps to scan with your printer on mountian lion, make sure to run the software update first to ensure that the latest HP drivers are installed:

  http://support.HP.com/us-en/document/c03550518

  Where the scanning software do not work as expected, that more probably caused by incompatible drivers installed on your system.

  In this case, remember to remove the software by following the HP uninstaller program (under Applications > Hewlett-Packard), rebot Mac and install the correct software by following the steps below:

  http://support.HP.com/us-en/document/c03378792

  Shlomi

• HP Office Jet J4680C All In One is offline now

  Original title: printer offline

  Our printer HP Office Jet J4680C All In One is currently offline. Have checked all the connections and made the troubleshooting steps and we are still unable to print? Help!

  Hi Wally,

  1 have. what troubleshooting measures you tried?

  2. did you of recent changes on the system?

  I suggest you to try the steps in the following article and see if that helps.
  Printer in Windows problems

  You can read the following article and check.
  The new status of the printer is "offline" after you remove a print queue and then restart a Windows computer

  See also:

  Why can I not print?

  Hope this information is useful.

• Installation for HP Office Jet 7210 all-in-One printer problem

  I try to install HP Office Jet 7210 all-in-one printer.

  My operating system is Windows Vista Home Premium, service pack 1

  My computer is an AMD Athlon 64 x 2 Dual Core Processor 5000 + 2.61 GHz, with 2 GB of RAM and on the 32-bit operating system

  When I go through the guests to the screen, I get two errors.

  (1) is due to an error of operation. As I have Vista it triggers a caveat, but I understand that this can be ignored and continued

  (2) the system can be installed using the "Run As" command... ». Apparently, I need to re - login as administrator. I am connected with the admin privaledges so not sure how to fix this

  Appreciate your help.

  I'm sure that yu you are trying to install from the installation to Windows XP CD. Try to download the software from THIS page and try to install.

• HP Office Jet, printer all in one

  Cannot send a fax from my HP printer online. CD Rom is used for Windows 98, 2000, XP.  I have a Vista computer. It's all functions correctly except the fax.
  Need help

  Hi Josiebrown,

  (a) since when are you facing this problem? What were the changes to the system between the time where everything has worked, and when you noticed the problem?

  (b) that you get specific error messages when sending a fax?

  (c) you have set up your computer to send and receive faxes?

  Step 1: first of all, install your computer to send and receive faxes, to do this, follow the steps mentioned in the link below:

  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-your-computer-to-send-and-receive-faxes

  Step 2: You can follow the steps mentioned in the link below:

  Solve fax problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-fax-problems

  You can also follow the steps in the HP link below:

  http://tinyurl.com/yhqkc6s

  Step 3: It is recommended to have the latest drivers for the device to use all the features of this one so make sure you have the latest drivers installed on the computer for your HP Office Jet printer all in one. See the link below

  http://welcome.HP.com/country/us/en/support.html

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• HP Office Jet 5610 all in one does not appear with the fax

  I got a new computer with Windows 7 when I added my printer HP Office Jet 5610 all in one, it does not appear with the fax.  When I tried to install it with the disc from the printer, he Wouln't install.  What is the problem? I really need on the part of the printer fax.

  Hello

  Try this maybe this will help.

  -Type fax in the research - type on Windows and scan-new fax fax...

• My Office Jet 6210 all in one printer has an error message is displayed. "OX805dcc31 1309:fm_interpre".

  My Office Jet 6210 all in one printer has an error message is displayed. «OX805dcc31 1309:fm_interpre the printer will not be closed off the coast (unless I unplug it), and I can not get the error message to change.»  Any ideas what I can do?

  It sounds like a code of 'asserting' firmware, something really bad happened - the most probable hardware problem.

• Universal printer driver do not recognize all-in-one 4500 G510g in environment Windows XP 64

  Unfortunately, HP do not provide drivers for Windows XP 64 bit for all-in-one 4500 g.

  I tried to use the printer driver universal which is insured for the 64 Windows XP Home edition, but this driver also failed (connection USB or Ethernet connections). Maybe someone has used these UPD successfully?

  Hello

  The printer driver Univarsal recognize only PCL 5 or 6 printers (Laserjet especially), it is not intended for the series 4500 JO.

  In order to provide a work around, you can use some alternative PCL3 driver, however it will be applicable on the network only.

  Check the IP address of your printer (configuration > reports / network)

  Add a printer from the Control Panel, select manual configuration and create a new TCP/IP port with the IP address of the printer.

  Select the HP Deskjet 5550 printers list, and then try to print.

• Office Jet 8620 (all-in-one) will work w / windows 10

  (1) work 8620 (all-in-one) Will Board jet w / 10 windows?, I replace a photosmart 2610i w / duplexer.

  (2) for the wireless working, I need something for my desktop computer?

  THX

  Yes the new 8620 Officejet Pro will work fine with Windows 10.

  The drivers are here

• Desktop all-in-one HP 19-2113w: product for Windows 8 activation key...

  Greetings.

  I need an activation key for Windows 8 (not 8.1) on my HP 19-2113w all-in-one desktop PC.

  It came with 8.1 pre-installed, but I need 8 for a new job, I'm starting.

  I have a valid copy of Windows 8 is installed, I just need the key...

  I tried to get Microsoft and HP, Windows 8 Support is apparently an orphan.

  Thank you

  RCline7

  rcline7 wrote:
  

  Greetings.

  I need an activation key for Windows 8 (not 8.1) on my HP 19-2113w all-in-one desktop PC.

  It came with 8.1 pre-installed, but I need 8 for a new job, I'm starting.

  I have a valid copy of Windows 8 is installed, I just need the key...

  I tried to get Microsoft and HP, Windows 8 Support is apparently an orphan.

  Thank you

  RCline7

  Your laptop comes with a Windows 8.1 key and that's what you bought according to your post.

  You must purchase a license from Microsoft or a supplier activation key.

• Desktop all-in-one PowerPoint

  I have a new HP Pavilion all-in-one desktop computer and want to use it for presentations Powerpoit, but I don't see how to connect it to another screen or data projector.  How the link to the presentation?

  Hello

  Many AIO machines don't have video IN port (s). You need video OUT or ports in order to connect to an external projector. The suite of device (or similar) can do for you:

  http://www.centrecom.com.au/IOGEAR-USB-20-external-DVIVGA-video-card-for-macpc

  Kind regards.

• Desktop all-in-one HP 19-2113w: desktop PC HP all-in-one 19-2113w: upgrade Windows 8.1 for Windows 10...

  Greetings.

  I am considering upgrading my HP 19-2113w all-in-one desktop for Windows 8.1 for Windows 10 PC.

  What is the best way to do it?

  Thank you

  R. cline

  I like to use this tool.

  http://www.Microsoft.com/en-us/software-download/Windows10

• Desktop all-in-one HP 2113w 19: install Windows 7 or 8 on desktop PC HP all-in-one 19-2113w...

  I need to install Windows 7 or 8 on my HP 19-2113w all-in-one desktop PC. The machine came with pre-installed Windows 8.1.

  I have a copy of Win7, but my product code is expired.

  What is the cheaper, faster and less painful way to solve this problem?

  Thank you.

  R. cline

  Hello @rcline7,

  I read your post on how you're looking to install Windows 7 or 8 on your desktop computer, and I'd be happy to help you in this case!

  To retrieve a copy supported Windows for your computer, I recommend that you follow the steps described in this document about getting a HP recovery disks or USB HP recovery disc.

  Please re-post with the results of your troubleshooting, and I look forward to your response!

  Concerning

• How do you set the time and date for the fax on HP Office Jet 4622 all-in-one printer?

  I installed the all-in-one printer HP Office Jet 4622 and everything works like.  However on the test page for the date and fax are showing Jan-00-00 00:00 AM.  I don't know how to change the date and time.  Help, please.  Thank you.

  Use the Setup (wrench) button on the front of the printer to look through the settings menu to set the date and time of the printer.

• HP Desk Jet F4180 All in One

  As a 81 year old elder, have problems printing in Portrait mode, something that has never happened before, I never change my settings.

  Have my settings for the simplest possible to print in black, but for a reason; Although the game for my paper Portrait is printed in landscape.   Print quality is exceptional and printer works fine in the case, can someone please advise me.

  Hi @lighteningbolt ,

  I see that you do not want to be able to print in portrait mode. I can help you with this.

  Try another application to see if you have the same results.

  I have provided a few steps to check the settings for the picture of the application and the printer driver.

  According to what you print from use, verification of the application to ensure that the orientation is set correctly. The application that you print from, go to file, print, make sure that it is set to Portrait mode and no landscape. Or the application, go to file, Page Setup, Portrait.

  Check the orientation of the page:

  1. make sure you have loaded paper in the tray.
  2. in the file menu of your software application, click on print.
  3. make sure that the HP all-in-one unit is the selected printer.
  4. click on the button that opens the Properties dialog box.
  Depending on your software application, this button may be called properties,
  Options, configuration of the printer, printer or preferences.
  5. click on the features tab.
  6. in the Basic Options box, click one of the following:
  • Click Portrait to print vertically on the page.
  • Click landscape to print horizontally on the page.

  What operating system do you use? How to find the Windows Edition and the Version on your computer.

  What application you are trying to print from?

  If you need help, let me know.

  Have a wonderful day!
  Thank you.