Unable to browse network with new router - HELP!

Similar Questions

• Unable to get online with new router-"Local access".

  Original title: can't get online with new router.

  I'm having a lot of trouble to get online with my laptop.

  My roommate has recently got a new EE Brightbox. It works perfectly well with his laptop and mobile phone. Also works with my mobile phone. However, when I try to use my laptop it only gives me "Local access". I have no problem connecting to the router, but it just won't let me go online.

  Tried to disconnect/reconnect the connection Wireless on laptop from scratch with wired connection to router, router and router reset re-booting. None of them have worked.

  Any help would be great?

  Laptop works on Vista.

  Hi Rob,

  Thanks for the reply.

  Have you tried methods of resolution of the problems mentioned in the previous answer?

  Please update the State of the question, we are here for you help!

• I have 3 PC home networking with a router. How to connect my new hp 6500 has more so any pc can print

  I have 3 PCs at home with one with XP 32 bit and cable to connect to a router Internet, the secoond PC with windows 7 64 bit and wireless to the same router and the third PC with XP 64-bit with the same wireless router. Currently, two have their own wired to their own printers. I want to replace the two existing printers with my newly purchased HP Officejet 6500 has more which will be located next to the XP 32 bit PC which has currently a cable connected to the router. How can I connect the new HP Officejet 6500 has more to my network to allow any of the three computers to print to the officejet and install the HP software on all 3 PC and if so what progs? I'm sorry if it's a very basic question, but I'm not a computer scientist and the help delivered with the printer documentation does not appear to this lay person to give this information on how to set up a home network with this printer. Thanks in advance for any advice.

  Mike4D

  Hello

  You can choose one of the following 2 options:

  

  Option 1: simila in the image above

  Connect the printer to the router,

  Connect a PC to the router (not wireless computer)

  Option 2:

  Connect a PC to the router (not wireless computer)

  Connect the printer to the wireless router

  Option 1 makes the computer without a connection to the printer. For the other two computer is the same on the two configuration options.

  Please use the following book to configure things

  http://h10032.www1.HP.com/CTG/manual/c00389927.PDF

  Kind regards.

• Wireless configuration of HP C4780 with new router and Mac (wireless network not found)

  About 10 months ago, I bought a new router. I already had several problems connecting my HP C4780 to my old router, and after setting up the new router, I was totally unable to connect the printer wireless to my router.

  I have reset the system to the printer on my Mac, I have reset the settings on my printer wireless, I downloaded the latest HP software, I've uninstalled and reinstalled the HP software several times and I have had no success. When running through the Setup Wizard, I was able to select the printer and method (wireless network set up by USB) before plugging the USB key. After that, the Setup Wizard says "Device not connected" (DUH!) and the screen select network said simply "no discovery goes Wi - Fi network." I ran the print to the printer from the Network Configuration, and he identified 15 networks (mine included). So, it seems that the Wi - Fi receiver on the printer still works...

  Any suggestions?

  P.S. This printer has been nothing trouble since I got it, and I wouldn't recommend it to ANYONE (I like actually...).

  After attempting to run the installer on my boot camp Windows 7 Ultimate version, I fell at last on an obscure statement in the configuration of the PC software for the c4780. It says to connect the computer to the router using the router WPS button.

  I have reset the configuration on the printer and turned off wireless the wireless, then I pushed the the router WPS button until the blue WiFi light on the c4780 lit. THIS SEEMED to BE THE KEY STEPS to CONNECT THE c4780 to MY ROUTER.

  After that, the configuration and setting up the printer on my Mac using the system of preferences was a piece of cake. Functions of the printer and the scanner work with Mac drivers.

  Problem solved... For now... This printer is so buggy, I have no doubt I'll have similar problems in the future.

• HP Officejet Pro 8100: unable to operate a printer wireless with new router

  The HP Officejet Pro 8000 has worked successfully for a year on a home network with 3 computers wireless using an internet ATT Uverse router.  The router was changed to another new router with a different network name and the WiFi password ATT Wireless and the printer does not work wireless. The printer does not work dedicated to a single computer with a USB cable.

  Should I download and reinstall a new driver?

  Replacement of your wireless router try here.

  http://www.HP.com/global/au/en/wireless/reconfiguring-system-Help3.html

• need help connecting HP envy 4520 with new router

  I have a new router. Cannot find where to change the settings of the printer. Cannot print.

  Reset the printer to the default network.  Then use the front panel wireless configuration wizard if your printer has it.

  Replacement/change your wireless router, try here.

  http://www.HP.com/global/au/en/wireless/reconfiguring-system-Help3.html

  Make sure that your router is set to a fixed channel wireless as the 1, 6 or 11, never 'auto '.  Try channel 1 first and then the other one at a time.  Make sure that the printer and the router are spaced at least 5 feet.

  Brand and model of modem and router?

  However, if you have a gateway device (modem + router), all gateway devices are terrible for connectivity and wireless performance.   If this does not work, suggest you put this bridge in full bridge mode device and install your own router of high quality that YOU have full control over.

• C4780 printer: Pinter offline with new router

  I recently had to buy a new router... Linksys EA2750. Printer does not recognize the network. I would appreciate any help with this issue. TY

  @eb153

  10.6 and HP Photosmart full feature software and drivers - Mac OS X v10.4, v10.5

  http://FTP.HP.com/pub/softlib/software11/COL28594/MP-70896-3/PS_AIO_06_C4700_USW_Full_Mac_WW_30.dmg

  Update critical to prevent and recover a façade for the HP Logo does not

  http://FTP.HP.com/pub/softlib/software11/COL35049/OJ-86830-1/HP_Firmware_Updater_C4700_3_2_1.dmg

  REO

• HP L7680 - display offline with new router Xfinity

  We recently changed to a gateway router Xfinity and our Officejet L7680 is connected via an ethernet cable to the new router.  However, the printer is showing offline on computers that are connected to the wireless network.

  The Xfinity settings gateway shows the printer as a device connected when I connect and the printer settings (accessible via IP address) show that it is online.  But when I try to print something it says the printer is offline.

  We use macs (1 x MacBook Pro running 10.9 and 1 x Pro Mac running 10.6).  Both have the same problem.

  I tried all power and turn it back on.

  I tried to delete the printer installed on the Mac and again add a new printer, but is no longer appears in the list.  I tried adding them as an IP address, but the printer does not print correctly (spit the code).

  Any ideas - it drives me crazy?

  Thank you

  Thanks for your help, Cheetah12.

  I finally found the solution!

  The PC connected via a cable ethernet print very well, like the Windows laptop connected via Wi - Fi, so I thought it was a problem with the fact that I was using Mac.

  I uninstalled the printer and then reinstalled driver as the use of PPIS and the IP address of the printer.

  So far, it seems to work!

  Thanks again.

• Unable to connect to my new router cable, my XP and Windows 7 machines

  Vista, wireless router Netgear, no link, please help

  No matter what I try, I can't connect to my new router cable, my XP and Windows 7 machines work fine but the Vista laptop are it. Have searched the web, looked at this site and the forums, but nothing does not jump and helps me solve the problem. I use a HP Pavilion DV9000 laptop, all service packs updates and so forth... any ideas?

  I suggest that you contact your ISP and get their help in setting up the Vista machine so it connects properly.  They know the right settings for the access provider, while we do not have and that there may be something else you need to do with Vista which is different of the other two systems (and hopefullly the ISP will also know and be able to talk you through the process).  I call my ISP all the time and they are VERY useful and have ALWAYS resolved any problems, I called (even if sometimes he had a visit from a technician).

  If the ISP Can ' t/don't/can't help you, then after coming back here and we'll try to go through it step by step, even if we cannot have all the information we need.  But I am sure that they will be able to help you more quickly and more effectively and with greater chances of success.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Problem with new router WRVS4400N

  I recently bought a new Cisco WRVS4400N router for our network which has 19 computers connected to a switch of 24 ports.  We currently use a D-Link router and migrate to the Cisco router.  The problem I have is that as soon as I connect one of our servers or the switch 24 ports to the Cisco router I can no longer access the internet or the connection to the network, I can also access the routers of each server configuration.  If I connect the router to make a stand-alone computer I can access the configuration and change things, but as soon as I connect the server or switch 24 ports everything dies (all lights are green on the router but if everything is connected).

  Has anyone experience this problem with this router?

  Any help would be greatly appreciated.

  Kind regards

  Shawn

  Hi Shawn,

  Thank you for posting. The server provides DHCP on your network? If so, disable the DHCP server on the WRVS4400N before you connect it to your network.

• Printer wireless connected but offline with new router Xfinity

  A FIOS Actiontec router wireless, printer HP 6515 functioned well as a wireless network printer.  Just replaced FIOS with Xfinity Cisco router.  Shows printer HP 6515 as connected (print network configuration page) but both PC (Windows 7) indicate printer is in offline mode (no check mark).  Printer has set the IP address with FIOS router.  Running doctor printing & scanning HP without success.  Suggestions?  Thank you!

  Replacement of your wireless router try here.

  http://www.HP.com/global/au/en/wireless/reconfiguring-system-Help3.html

• Unable to connect TV to new router

  KDL-46HX820. In the process of setting up the TV, I properly connected by Wi - Fi on my router Linksys Valet Wi - Fi. Later, I replaced this router with a Linksys E4200. The Linksys router has generated its own network ID and password. I tried to connect the TV to the new wireless router using the WPS process, but the TV will not connect.

  What should I do to get the TV to connect to a new wireless router with a new network ID and password?

  Thanks for any help.

  Try to assign a static IP address for your TV. First of all, you need to find the address of the gateway of your wireless device. In a computer that is connected to your wireless network, you can open a command prompt window (start - run - cmd) and type ipconfig. This will give you the address of the gateway (for ex: 178.152.1.1)

  Then go to the TV and go through the configuration of the network (wireless).
  When you configure IP address and proxy, choose (custom instead of Auto).

  Then proceed as follows:
  IP address: 178.152.1.15
  Address of subnet 255.255.255.0
  Default gateway 178.152.1.1
  Primary DNS 8.8.8.8
  Secondary DNS 4.2.2.2

  Note that the IP address and default gateway is the same as your gateway address you got from the computer except the last figure of the IP address.

  Then browse the rest of the setp upwards and who need to connect to your wireless router

• HP Deskjet 3510: Cannot connect wireless with new router

  I got a new modem with router wireless integrated into my cable company.  Now, I am unable to connect wirelessly to my printer. He seems incapable of finding new wireless information.  The closest I could get the printer screen advised to 'hold the WPS button. '  However, my cable company has confirmed that the WPS NO button there and is not an option.

  Can someone help me get my printer working again?  Thank you!!

  @LisaC11

  Printer:

  E-all-in-one printer, HP Deskjet 3510 range

  Full software features:

  File name: DJ3510_1315 - 1.exe

• Problem network with new 8500 all-in-one print

  I installed a new Officejet pro 8500 has more on my network.  I have 3 computers on the network set up this way: DSL modum connected to Linksys router, all 3 computers connected to the router, PRINTER is connected to the COMPUTER main and other 2 computers print via the main computer.

  I installed the printer sucessfully and run the HP Network Assistant after the connection via another computer dialog boxes.  I can print and fax very well from the main computer, but not on other computers.  I set up the printer as a 'shared' on the main computer and other computers recognize the printer and set it as default printer.  But when I try to print form other computers, nothing happens.  When I go into the properties of the control panel - printers - ports on the main computer, the printer is listed as USB002 but when I click on "Set up" I get "an error occurred during port configuration.  This operation is not supported.

  Main computer is running Windows Vista with current updates

  Other computers running Windows XP SP2 with updates.

  Any ideas?

  Thanks, Jim

  Problem solved: some how the "printer offline" option was checked.  Once I unchecked everything works.  I can't for the life of understand me how this has verified in the first place.

• LaserJet p1102w: how to access the interface web printer with new router

  I just bought a new wireless router, hoping that I'll be able to more easily print with my p1102w.

  Internet access works ok desktop and laptop (wireless).

  However, I had bookmarked the IP address of my printer, and before, I've always been able to access it by clicking on the bookmark. I checked the range of IP addresses for the router, and the IP of the printer is outside this range, so I don't know why I am no longer able to access to this. I can't access the web interface, whether they come from my laptop or desktop (wired). However, the printer is capable of printing from the desktop without problem.

  How do I enter this? I would like to restart the configuration wireless configuration, but I thought I needed the web interface for this.

  I should just insert the CD? I made a tweak or two and would prefer to keep all the settings of the printer even if I can, but I can start all over again if I have to.

  
  HP LaserJet p1102w

  I just deleted the printer on my laptop computer, reset the settings of the printer default and then run Setup from the wired desktop wireless utility wireless. Seems to have worked, I can now access the web interface via my laptop now.