HP laptop - 15-r253ne: usb 3.0 for HP 15 laptop driver

Similar Questions

• 203tx HP 15r: Usb 3.0 for hp 203tx 15r driver

  My driver for usb 3.0 port do not work well leading to speed low transfer of laptop computer for USB

  Thanks for giving me the proper drivers

  card-Hp 15r 203tx

  Windows pro 8.1

  Hello @Md229,

  Thank you for visiting the HP Forums! A place where you can find solutions for your problems, with the help of the community!

  I stumbled upon your post on the issue of the USB port and want to help you!

  You can find the drivers for your product here: drivers - HP for laptop - 15-r203tx

  Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution' , this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

  Have a great weekend!

• USB wireless adapter for computer laptop problem

  Hello:

  The HP laptop with XP get "Low" signal every time I'm in the other room that is not too much longer off the router, about 60 to 70 feet away from him.  Then, yesterday, I got USB Netgear adapter in the hope of trying to get more signal.  Because, says a guy in the store of the computer installation USB adapter is 'boost' to get decent and more signals.

  When I installed the Netgear adapter for the laptop, there is no signal at all and to appear the following message appears in the middle of the screen.

  NETGEAR 111v3 Smart Wizard, WEP Passphrase to create WG and the key manually

  My question is;

  How to install the USB Netgear adapter for laptop?

  Thank you for your help in advance.

  Hello

  The general idea that a USB adapter is a bit a booster dose is false. I'm not sure that you will get the USB Ant thing you don't get the laptop.

  According to the physical environment, 60 to 70 domestic feet with walls is probably beyond the capacity of the wireless router.

  As for your specific question, it seems that USB is correctly installed but must adjust its password security to your current wireless network.

  In general.

  My wireless is not working - http://www.ezlan.net/wireless.html

  Basic wireless configuration - http://www.ezlan.net/Wireless_Config.html

  Wireless Security - http://www.ezlan.net/Wireless_Security.html

  Extending remote - http://www.ezlan.net/Distance.html

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• Have verizon usb 720 modem for my laptop. 1603 error codes and Error code 2738 appear when you try to install the update for the device.

  Have verizon usb 720 modem for my computer laptop vista Home Premium 32. Here downloaded update but when get novatel driver the device install failed code 1603. Then he checks the previous versions and the installation States. After 1 min error 2738 VBSricpt moment of action custom execution failed. A verizon tech says that it is a windows problem. Another says that it is a usb device bad 720. Verizon says the rssi-rtt and the rssi on there network evdo should be about - 80 and my poster-98 device manager and-88 most of the time. With 3 bars of signal, they say it's the 720.mkv that's a bad camera or laptop? Can not stream video and Media Player even freezes. Have updates and it started 2 months ago. Any help don't want not to block 2 years for a new modem, if no change. Or would it be the laptop? Thanks for any info.

  It comes with Vista, upgrade install and activate Forum.

  http://social.answers.Microsoft.com/forums/en-us/vistanetworking/threads

  "Connect to a network, mail and the Internet."

  Or here:

  http://social.answers.Microsoft.com/forums/en-us/vistahardware/threads

  They will help you with your question in Vista Hardware and drivers Forum above.

  They will help you with your question in the Forums above for Vista.

  See you soon.

  Mick Murphy - Microsoft partner

• USB 3.0 for macbook pro

  What is the best option to add a USB 3.0 for the port of mini extension on a 17 inch end 2011 Macbook Pro?

  If your computer has no com with 3 USB ports you can improve not USB 3. USB 3 devices are backward compatible, so that they will connect to your USB 2 ports and operate at the speed of the USB 2. You can connect to a USB 3 hub on your computer, but it will operate at USB 2 speed unless you connect it to a USB 3 port on your computer.

• Can I have simultaneous USB and LAN for IX4 connections - 300 d?

  Can you have a USB to PC connection and a connection to the local network (ethernet) at the same time?

  I have not gigabit LAN (yet) and I have a few files that I need to transfer a PC, so I thought using USB 2.0 (not 3.0 yet) would be faster. So, I would just periodically connect the IX4 to PC via the USB port while it is still connected to the local network. Are there problems with it?

  ix4s USB ports are for drives external, printer or connections UPS only (ix4 ports are host ports) and not for connecting another host (customer e.g.PC).

  No luck...

• USB 3.0 for g7-2246-Windows 7 driver

  I'm tryingto findthe right driver for USB 3.0 for windows 7 64 bit

  Hello:

  Download and install the AMD Chipset drivers and reboot.  You want the chipset of 49.7 MB file.

  http://support.AMD.com/en-us/download/chipset?OS=Windows 7-64

• How can I use internal clock case OR USB - 6259 BNC for the acquisition of digital data in my own big software?

  I want to integrate the ANSI C sample program ReadDigPort - ExtClk.c in my own big package.

  I want to use the internal clock of the BNC NI USB-6259 (.. 80 kHz 120 kHz).

  In the document:
  High speed M: Series Multifunction DAQ for USB - 16-bit, up to 1.25 MECH built-in BNC connectivity. / s,.
  is written:
  Or sample DI source clock: Any PFI, RTSI, HAVE sample or convert clock, AO, Ctr n out internal and many other signals sample clock
  The digital subsystem doesn't have its own dedicated internal synchronization engine. Therefore, a sample clock must be provided another subsystem on the device or from an external source.

  How can I use internal clock case OR USB - 6259 BNC for the acquisition of digital data in my own big software?
  With what other subsystem on the device can generate a source of the clock? How?

  It is possible to set a clock on an internal counter (for example ' Dev1/ctr0"):
  Creates channels to generate digital impulses that define the freq and dutyCycle and adds the channel of the task that you specify with taskHandle.
  DAQmxCreateCOPulseChanFreq (taskHandle, "Dev1/ctr0" units, clockName, idleState,
  initialDelay, freq, the duty cycle); works

  But it is not possible to drive this internal clock to a terminal (for example "/ PFI0/Dev1"):
  DAQmxErrChk (DAQmxCreateCOPulseChanFreq (taskHandle, "/ PFI0/Dev1", clockName, units, idleState, '))
  initialDelay, freq, the duty cycle); does not work: error DAQmx: measurements: type I/O of the physical channel does not match the type of I/O required for the virtual channel you create. Name of the physical channel: PFI0. Name of the virtual channel: clock

  The sample clock source can be derived from an external terminal (for example "/ PFI0/Dev1"):
  Sets the source of the sample clock, the sample clock rate and the number of samples to acquire or generate.
  DAQmxCfgSampClkTiming (taskHandle, "/ PFI0/Dev1", maximumExpectedSamplingRate, DAQmx_Val_Rising, ")
  DAQmx_Val_ContSamps, bufferSize); works. Acquire or generate samples until you stop the task

  But it is not possible to derive the internal counter of the clock (for example ' Dev1/ctr0"):
  DAQmxCfgSampClkTiming (taskHandle, "Dev1/ctr0", maximumExpectedSamplingRate, DAQmx_Val_Rising,
  DAQmx_Val_ContSamps, bufferSize); does not work. Error: Acquire or generate samples until you stop the task: make sure that the name of the terminal is valid for the specified device. See Measurement & Automation explore valid names of terminals. Property: Property of DAQmx_SampClk_Src: DAQmx_SampClk_ActiveEdgeSource device: Terminal Source Dev1: Dev1/ctr0

  Hi datafriend,

  using what it says is correct:

  Or sample DI source clock: Any PFI, RTSI, HAVE sample or convert clock, AO, Ctr n out internal and many other signals sample clock
  The digital subsystem doesn't have its own dedicated internal synchronization engine. Therefore, a sample clock must be provided another subsystem on the device or from an external source.

  This means that if you do not use an external signal as clock you can use the sample clock to HAVE it on board or at the output of the internal counter.

  There are also 2 ANSI C examples in this regard:

  http://zone.NI.com/DevZone/CDA/EPD/p/ID/4485

  http://zone.NI.com/DevZone/CDA/EPD/p/ID/4488

  So in both cases you have to use a fictitious task you need only for the generation of the internal clock (HAVE or CTR)

• enclosure USB 2.0 for sata @ ide - recongnised but not available in xp

  I have a box of HD USB 2.0 to SATA @ IDE hard drive. I plug it into my computer and he recognizes her, but I can't display all the files contained in it because it is not in the files anywhere. I ran windows updates, but still do not see it.
  It is a xp problem or a problem with the storage device itself.

  Hello Missquarts,

  Thank you for your message.  Please follow the steps below:
  Click 'Start' > right click on 'My computer' > select 'manage '.
  Click on "disk management".
  Do you see the drive in that list?  If so, click on the drive and assign it a drive letter.
  Please let us know if it did or did not help to resolve this problem.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Remote usb mouse freezes for bout 45 seconds after coming out of sleep mode

  Remote usb mouse freezes for bout 45 seconds after coming out of sleep mode

  Hi Aubrey,

  Step 1: Put the computer to boot and see if the problem still occurs

  Follow step 1 in the link below,

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.

  Continue with the remaining steps to pin-point on the third party service.

  After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.

  Important: n ' forget not the computer to start normal follow step 7 in the link.

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• I have problems to connect external ts-t633a atsst usb dvd RW for an acer aspire one netbook.

  Read/write CD drive but is unable to write or even recognize DVD media. I had to work with only one DVD, but generally it does not recognize the media.

  Hello, Ben Harding,.

  Thank you for your message.  Click HERE for the link to Acer, you will need to download/install the latest driver for your CD/DVD drive.  Please let us know if this or help to solve your problem.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Recover the Original of Windows 8 for the new HARD drive

  Hello..

  Drive HARD original of my Dell laptop inspiron 15R 5521 has been crushed. She had previously installed Windows 8.

  And, I had upgraded to windows 10 recently.

  Please guide me to reinstall windows 8 or 10 for the new HARD drive via online, coz' I don't have any support recovery (DVD or USB).

  And further,

  1.) is it possible to reinstall windows for one SSD?

  2.) I get all venus applications (application of VGA, Audio application etc.) from Dell with my laptop with the re-installation of windows... ?

  Thank you

  Tilan

  If your system already has Windows installed and activated 10 follow my instructions here to directly download and reinstall clean Windows 10:

  http://dellwindowsreinstallationguide.com/download-Windows-10-OEM-and-retail-ISO/

  http://dellwindowsreinstallationguide.com/a-clean-install-of-Windows-10/Windows-10-clean-reinstallation-via-bootable-USB-from-ISO/

  Looks like you're in this scenario.

  Note Windows 8.1 and Windows 10 editions are specific. If your system came with Windows 8.1/10 unilingual homepage, Windows 8.1/10 will not be activated.

  Unfortunately there is no clear marker for end users to determine the edition so my advise is to try first to try Windows 10 Home, if she does not activate Windows 10 unilingual homepage.

  Get a SSD for optimal performance.

  Dell have updated drivers for Windows 10 pilots (WT64a) system:

  http://downloads.Dell.com/published/pages/Inspiron-15R-5521.html

  See installing the driver recommended order:

  http://dellwindowsreinstallationguide.com/2015/09/27/driver-installation-order-Windows-10/

  If Windows 10 was not enabled you must reinstall Windows 8.1 and then upgrade. Follow my instructions here:

  http://dellwindowsreinstallationguide.com/download-Windows-8-1-retail-and-OEM-ISO/

  http://dellwindowsreinstallationguide.com/upgrading-to-Windows-10/

• Toshiba laptop drive automatic error Code 10

  Im getting a code 10 on my laptop drive automatic backup of toshiba. Ive tried uninstalling and reinstalling just says cannot start the device. I think im missing a hardware device driver, but I can't find this driver anywhere online. Can someone please help:)

  Hello Chan,

  I found your posts on the Toshiba site, I take it no luck with the new replica? Also, have you tried to contact Toshiba technical support? It seems that they have heard of this problem before (based on many previous occasions this problem came) .f you don't have, I would say that you communicate with them.

  That said, two possible solutions from another thread which may apply to your situation:

  1. Sometimes if a USB port not properly initialize on startup Windows installs a "unknown device" driver by default. Of course nothing plugged port at this time won't work. Sometimes it can continue to attribute this driver on the same port on subsequent reboots. Search for all entries 'unknown device' under Controllers USB in Device Manager then uninstall them. Right click on "Find the hardware changes" or reset must be reinstalled the correct USB device driver.
  2. The problem with the hard drive occurs if you turn on the USB drive after that the computer was started? Some interfaces of USB drive can interfere with Windows to detect the USB controller that they are connected correctly. Only seems to happen if the player is powered on while Windows starts.

  I guess that Technical Support Toshiba offers these strategies you anyway, so you can as well try now them. Let me know if this helps you.

  Kind regards

  BearPup

• Please recommend what to look for in an external drive for my Macbook Pro

  I don't have a lot of data, but I'm a writer and want a back up of novels and photos and photo projects. Can someone knowledgeable tell me what to look for in an external drive? I said to get one with a fan, but have seen highly recommended to those without a fan.

  Thanks in advance,

  NanaCA

  If portability is a requirement, such as this storage drives will do:

  http://eShop.MacSales.com/shop/FireWire/on-the-go

  If the HARD disk will live on the desktop all the time, your choice increases.  Here are a few more examples (and there are more):

  http://eShop.MacSales.com/shop/FireWire/EliteALmini/eSATA-FW800-FW400-USB

  http://eShop.MacSales.com/shop/FireWire/1394/USB/EliteAL/eSATA_FW800_FW400_USB

  The fans are not always essential if the design of the enclosure is made correctly.

  There are many publishers and other options are available, but OWC is a good seller with excellent customer support.

  Note that anything that is stored on a disk external HARD must also be safeguarded if the data has the value.

  Ciao.

• Re: Satellite P300 - need support for the 2nd HARD drive

  Anyone know where to find support for a 2nd hard drive of my P300-17R laptop? Modelnumber; "PSPC4E-04701LDU.
  It must be sent to the Netherlands.

  Check eBay. You will find everything.