HP laptop Dv6105us - someone running Windows 7 on the F.43 update BIOS?

Similar Questions

• How is it that some machines running windows vista, when the router is updated or changed, they show "limited or local only" when you reconnect then wireless.

  problems with wireless Vista "local only".

  How is it that some machines running windows vista, when the router is updated or changed, they show "limited or local only" when you then reconnect wireless... nothing else was changed on those computers and other devices can connect ok?

  Hello

  Each router is assigned to the specific address (called IP address or IP address). And each router maintains its own database (called as base of router) to follow the networking devices communicate with him. When the router is changed, the particular router is unable to detect the device, especially the network card to communicate with the computer.  Since he does not have details of the database of network devices, communicate with him.

  • You are able to access the Internet?

  Try the steps mentioned below and check:

  Method 1:

  Step 1: Enable or disable a network adapter and then check:

  http://Windows.Microsoft.com/en-CA/Windows-Vista/enable-or-disable-a-network-adapter

  Step 2: Run Network Diagnostic tool and check:

  Network connection issues: http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

  Method 2: Wi - Fi and in Windows network connection issues:

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Reference links:

  Of network connectivity status incorrectly as 'Local' only on a Windows Server 2008 or Windows Vista-based: http://support.microsoft.com/kb/947041

  Setting up a wireless network: http://Windows.Microsoft.com/en-us/Windows-Vista/setting-up-a-wireless-network

  Connection to wireless with Windows Vista: http://technet.microsoft.com/en-us/library/bb878035.aspx

  Hope it works.

• My laptop that is running windows xp does not recognize the computers on the network running windows 7. Any advice?

  I recently created my home network again.  It consists of a laptop running windows 7 Professional 64 b, b Office windows 7 Professional 32 running and a netbook under windows xp home.  Two computers running windows 7 recognize each other and share correctly, but the netbook will not recognize the other computers on the network at all.  They can see it, but then say they can't access them when you are trying to access.  They are all on the same workgroup.  Computers that run windows 7 discovered the network, file and printer sharing, and public folder sharing all lit.  Password sharing is disabled and windows manages the homegroup connections.  Any advice would be appreciated, I need to use computer dvd players 7 on the network to install some things on the netbook.

  Hi mahmorc,

  ·         You get the error message?

  Follow these methods.

  Method 1: Follow the steps in the article.

  How to troubleshoot a network home in Windows XP

  http://support.Microsoft.com/kb/308007

  Method 2: Perform a clean boot to see if there is a conflict of software like the clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After the boot minimum troubleshooting steps, follow section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start and then click Run.

  (b) type msconfig and click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal Startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

  Method 3: Update the latest drivers for the network card.

  How to manage devices in Windows XP

  http://support.Microsoft.com/kb/283658

• I bought Windows 7 install on my Dell Dimension 2400 currently Windows XP. I can move program Windows XP my laptop that is running windows 98?

  I bought Windows 7 install on my Dell Dimension 2400 currently Windows XP.  I can move program Windows XP my laptop that is running windows 98?  I need to access or code # s to do this and if so, how I get supplied with the printer Dell reinstallation disks have not all codes on them?

  original title: reuse of windows xp

  I bought Windows 7 install on my Dell Dimension 2400 currently Windows XP.  I can move program Windows XP my laptop that is running windows 98?  I need to access or code # s to do this and if so, how I get supplied with the printer Dell reinstallation disks have not all codes on them?

  No you can't. Given that it's a Dell and it came with Windows XP pre-installed, it's an OEM of Windows version.  The biggest drawback of an OEM version (at least in the USA) is that its license it permanently binds to the computer first it is installed on. He can never legally be moved to another computer, sold, or given to outside (except with the original computer). If the computer dies or is stolen, your license dies with him.

  And let me ask you as if you checked to make sure everything on the Dell is compatible with Windows 7, and there are Windows 7 drivers for all your hardware that requires it.

• I have a laptop Dell E1505 running windows xp, can I install vista on I t?

  Original title: switching from XP to Vista.

  Hi all

  I have a laptop Dell E1505 running windows xp. I also have a desktop running vista computer. My laptop says it's vista

  able.

  My question is, if max out the ram of the laptop to 2 GB I can install vista on the laptop and it will work OK?

  Thanks in advance,

  Alan

  Alan

  You can check the requirements for win 7 http://windows.microsoft.com/en-us/windows7/products/system-requirements here

  Then it all just here check your system specs and compare http://www.pcworld.com/product/29398/dell-inspiron-e1505-notebook.html

• I was offered an upgrade of windows 10 on my laptop that is running windows 7, but my wifi button was not working when I installed 10 windows so I started 7 what can I do?

  Hello

  I was offered an upgrade of windows 10 on my laptop that is running windows 7, but my wifi button was not working when I installed 10 windows so I started 7 what can I do? It is an Acer Aspire 5920 G (old enough)

  Thank you.

  There could be a problem with the wifi driver that comes with Windows 10. I think that you first need to find the right driver for Windows 10 on the Acer site. Otherwise, you may need to install a usb wireless card.

  Thanks for reading.

• I have a DELL Inspiron 6400 running Windows Vista. The backlight turns off.

  I have a DELL Inspiron 6400 running Windows Vista. The backlight turns off when the charger is plugged after about 10 to 15 minutes. If I shine a torch on the screen, I see about the display is always. If I select change user from the menu start or stop / restart the machine, the backlight turns on and will last for another 10 to 15 minutes. I tried in safe mode and the same thing happens. Can someone help me with this problem?

  It could be the inverter Board or the backlight itself on the way to the outside. Whatever it is, it is definitely a hardware problem and it will take a good repairman to fix. You can contact Dell and see what they would charge to fix this, just to see if it would be more cost-effective to buy a new laptop or have it repaired. Because it is 5 years since it is manufacturing, you can be better to save your pennies for a new :-(

  SC Tom

• I am running windows xp sp3, the volume icon disappears from the taskbar on each reboot or shutdown/startup.kindly, help any permanent solution known.

  Hello!
  I am running windows xp sp3, the volume icon disappears from the taskbar on each reboot or shutdown/startup.kindly, help with any permanent solution known.i should go to the control panel and to recover it again whenever I turn my on.kindly advice, someone machine me a solution permanently this problem.i want to stay always on the taskbar the volume icon.
  the honest answer is expected... Thank you!

  Hello

  Try this:

  Control Panel - device - sounds Manager - note manufacturer device name and info on the graduating model.
  Double click and get the date and version of the driver (if 06 are dates, you use the default windows driver). Now
  Click the DRIVER UPDATE (this can not find anything because MS is far behind the certification of drivers). Now LAW
  CLICK above and UNINSTALL - REBOOT - it will refresh the driver stack.

  Now, go to the manufacturer of the system and recover the last pilot audio/Hi-Fi as a fall.

  Download it - SAVE - go to where you put it - RIGHT CLICK top - RUN AS ADMIN - REBOOT

  Now do the same for the manufacturer of the device (the one that made the device - if you were using the default windows
  you might need to look in the Device Manager - his new driver).

  Often, you will need to run the sound card drivers several times to get the latest version installed and will appear in
  Manager - Sound. This is because they make back the drivers one at a time and then finally install the
  most recent. Look in the Device Manager to be sure that you have installed the version of the driver is the one showing, if not
  run the driver again (reset each time) until the shows a correct.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Rob - bicycle - Mark Twain said it is good.

• I have 3 computers in a network; two Vista and one running windows 7. The computer of windows 7 can be placed in the network map.

  Hi, I have 3 computers on the network; two Vista and one running windows 7.  The computer of windows 7 can be placed in the network map (and I seem to be unable to it remote desktop).  This could be the cause?  I tried everything in the help documentation.  My router is a linksys 610n.  Computers have no NVIDIA cards or controllers.  Here's a screenshot of what I see in the network adapter:

  Hello

  Excellent Sam Job Varkey information should contribute to solve in this case, however some is
  Added information that can help as appropriate:

  Share files and printers between Windows 7 and XP
  http://www.howtogeek.com/HOWTO/Windows-7/share-files-and-printers-between-Windows-7-and-XP/

  Configuration network host connection windows 7, xp and vista
  http://Techblissonline.com/home-network-setup-connecting-Windows-7-XP-and-Vista/

  Networking of computers running different versions of Windows
  http://Windows.Microsoft.com/en-us/Windows7/networking-home-computers-running-different-versions-of-Windows

  =========================================

  More help at these locations: (Vista references also apply to Windows 7)

  Vista - LAN
  http://www.onecomputerguy.com/Networking/vista_network.htm

  Vista network and sharing Center
  http://www.onecomputerguy.com/Networking/vista_network_sharing_center.htm

  Setting up a network home
  http://Windows.Microsoft.com/en-us/Windows7/setting-up-a-home-network

  Setting up a wireless network
  http://Windows.Microsoft.com/en-us/Windows7/setting-up-a-wireless-network

  Home network, wireless network and computer networking Made Easy
  http://www.home-network-help.com/

  Windows Vista tip: How to install and connect to a wireless network
  http://www.watchingthenet.com/Windows-Vista-tip-how-to-Setup-and-connect-to-a-wireless-network.html

  Networking tutorial home
  http://www.tehnomagazin.com/computer/home-networking-tutorial.htm
  Practically networked - everything you could possibly want to know.
  http://www.practicallynetworked.com/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• I am running windows vista on the PC of my church and have inserted a USB stick with a MP4 file on it, but I can not read this file.

  I am running windows vista on the PC of my church and have inserted a USB stick with a MP4 file on it, but I can not read this file. Can I get help?

  I created a video for our Church on a desktop of Windows 7 through Pinnacle Studio 14 (editor) and registered as a .mp4 file. I then put it on a flash drive and put the flash drive in the computer of the Church, that is running Windows Vista, and the file will not play. Please provide help quickly!

  -Corey

  You need a media player that is compatible with .mp4 files.

  The following preferential ticket should solve your dilemma.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  VLC Media Player
  http://www.filehippo.com/download_vlc/
  (works on XP/Vista/7)

• I tried to install cs3 on windows 10 shadow run on my mac book pro.  Technical support told me that it does not run on windows 10 but doesn't give me an opinion on whether she would go if I was running windows 7 to the people's Summit.

  I tried to install cs3 on windows 10 shadow run on my mac book pro.  Technical support told me that it does not run on windows 10 but doesn't give me an opinion on whether she would go if I was running windows 7 to the people's Summit.  Any thoughts?

  First of all, that the software is old enough so that it does not at all with Windows 10... but

  An idea that MAY work to install or run some programs in Windows old 10

  -http://www.tenforums.com/tutorials/15523-compatibility-mode-settings-apps-change-windows-1 0 - a.html

  First, that the software is old enough for that it may ALSO not work with Windows 7... but

  For Windows 7 you right click on the program and select a compatibility option in the pop-up window

• I am trying to download CS on my HP Z400 running Windows 7 for the first time.  The installer won't boot.  It finally gives a "server not available" error after 30-45 minutes

  I am trying to download CS on my HP Z400 running Windows 7 for the first time.  The installer won't boot.  It finally gives a "server not available" error after 30 to 45 minutes.  I checked to be sure there is no Adobe folder in my program files.

  Hello

  Please check the help below document:

  Error download or update Adobe Creative Cloud applications

  You can also view the nets below where the issue has been addressed:

  Error 207 to "install Adobe".

  Adobe creative cloud installation does not work. Get the error code 207. All solutions?

  Kind regards

  Sheena

• I have two computers, one running Windows 8.1, the other works in Windows 7.

  I have two computers, one running Windows 8.1, the other works in Windows 7.  I put Premier Pro, or a suite, on both computers at the same time?

  Cloud license allows 2 activations http://www.adobe.com/legal/licenses-terms.html

  -Install on a 2nd computer http://forums.adobe.com/thread/1452292?tstart=0

  -Windows or Mac has no importance... 2 on the same operating system or 1 on each

• I'm trying to download the trial version of Illustrator, but I get a window indicating that the CC is updated and nothing beyond that. What can I do?

  I'm trying to download the trial version of Illustrator, but I get a window indicating that the CC is updated and nothing beyond that. What can I do?

  HI Margaret,.

  Please visit:http://prodesigntools.com/adobe-cc-2015-direct-download-links.html

  Don't forget to follow VERY important.

  I hope this helps.

  Concerning

  Megha Rawat

• Laptop computer Lenovo running Windows 8 factory reset (damaged Sceen) while unattended.

  Good evening everyone

  Could someone please help in a process that could help tracking? My Lenovo laptop running Windows 8 had been trying to run a factory reset and, unfortunately, while left unattended, my younger brother accidentally shot the cables, resulting in my now... current portable computer damaged screen. I left my laptop Lenovo intact and charged through my diet (Yes, I removed safely the internal battery) for more than 24 hours in his supposed factory reset process. I'm unable to view the entire screen and reading a part of the legend that led to believe me that my laptop is in a phase of repair? My current attempt must connect an external monitor to my Lenovo laptop and the caption "D - SUB POWER SAVING MODE" APPEARS. There may be ways to substitute this mode or could someone help please I can find myself having a restless night without solving my unfortunate situation.

  Kind regards

  Use chic

  Hello

  Welcome to the Microsoft community.

  The parameters of the screen and the screen shorts can be different for each OEM (Original equipment manufacturer). That's why I suggest you to contact the manufacturer of your computer.
  http://support.Lenovo.com/us/en/SelectProduct?c=1&returnUrl=%2fus%2fen%2fcontactus

  I hope this helps. Let us know if you have other problems with Windows in the future.