Cannot access BIOS

Similar Questions

• Cannot access BIOS on Satellite C875

  Hello

  I have a Sattelite C875 - 13L PSCBCE.
  I am running windows 8, and when I press the F2 key to start the computer, the computer starts Windows. I cannot access the Bios is only from windows 8 (settings > general...)
  I have another problem too, I can't turn off the option "open Panel - Power one. This option is enabled or not, the PC boots with the Panel open.

  Thank you very much for your answers.

  The complete stop next http://aps2.toshiba-tro.de/kb0/TSB2B03EY0002R01.htm and after to redo this laptop start and try to enter the BIOS settings.

• Cannot access BIOS for Sony Vaio VPCEH25EN

  Hello to all members of the community...

  Well, I have here the computer sony vaio laptop VPCEH25EN I tried evrerthing watched several videos...

  but I can't get into the BIOS settings...

  tried every combination of keys f1 to f12 alt del and help button but I cannot get into the BIOS menu...

  I think that the bios is locked actually, I want to install windows 32 bit currently there windows 7 64 bit...

  I also installed winbcd and tried to boot from usb it but it says no operating system found that the USB is DΘmarrer on my other laptop and desktop...

  the assist button does not have the option in the BIOS it has just 3 options...

  Start the recovery Wirard

  Tools

  Output...

  even more, I installed windows 10 64-bit on it and reboot into recovery of advance and there is no option to disable UEFI...

  Please tell me how to access bios on this laptop...

  I finally fixed it... Sony is a lame!

• Cannot access bios after installing the video card

  I have a PC HP 800 G1 tour.  When I install an EVA GT 520 external video card I can access is no longer the first screen to get the bios unless I get out the video card.  I want to change the bios to use only the external card, or at least to see the initial splash screen, but cannot access it.  It is running windows 8.1.  I updated the bios to the lasest version and still the same.

  Hello:

  You may need to change some BIOS settings - even if you add an external video card...

  http://support.HP.com/us-en/document/c03653200

• Cannot access BIOS laptop Aspire 7250

  Hi all, I have a laptop Acer Aspire 7250-0209 who cannot access the BIOS menu. When I turn on the laptop it just see the Acer boot screen and then immediately switch to a black screen with white text saying "no boot device - insert boot disk and press any key any." At first I thought that the HD was defective, so I replaced with a new HD but still its giving the same problem. Not only can I not load/start windows but there is no option to access the BIOS (even I tried pressing F2, F10, F12, delete). Please can someone enlighten me on what is possible for me to be able to access the BIOS and reinstall windows. Thank you

  short 2 pins on the right side

• Cannot access BIOS after own Win 7 installed on the new HD

  The machine is HP Elite E9240F. Here's what I did.

  1 replace the plant HD with faster player - went well

  2. clean install Win 7 on new drive - activate - went well

  3 reinstall the disc supplied with the box in the first place & format - went well.

  Now everything starts fine, and loads of Windows. NO problem BUT I cannot access the BIOS more. Not that I need at this time, but I would like to know that where I did it, I could.

  Repeated F1 or F11 at startup pressure will produce the black screen for the Windows Boot Manager.

  I removed the CMOS battery and retried - same results. I can access the blue screen when I select the boot sequence by pressing ESC but never can I go back in the system BIOS.

  Thoughts?

  All these systems are a bit different but F10 to enter the bios to me.  If it is your PC then F10 to enter the bios: http://support.hp.com/us-en/document/c01925486

• 6 beeps startup then normal but cannot access bios

  My computer is a desktop HP ENVY h8xt, Intel® Core™ i7-3770, 3.4 Ghz (Costco) which is the same as the HP 1420 t CTO with 64-bit Windows 8 H8

  I added a FX - 785 A-ZDF4 Double D XFX Radeon HD 7850 1 GB 256 - bit GDDR5 PCI Express 3.0 x 16 HDCP Ready CrossFireX... When I start, I hear 6 beeps, and then the computer starts fine and the video card.  However, when I try to access the bios by pressing f10 at startup, the computer restarts.  I'm unable to access the bios to try one of the solutions I've seen on the forums.  How can I eliminate the beeps and access the bios?

  I've also updated the PSU to an OCZ GameXStream OCZ700GXSSLI 700W ATX12V SLI certified CrossFire Ready Active PFC power supply which should have a lot of power (700w).

  I managed to solve this problem, and obviously it's a thing of Windows 8.  Obviously when you add a market after video card in a "certified Windows 8" PC, you will need to disable "secure starting", according to this link.

  In addition, in order to access the bios of Windows 8 you must get the bios from Windows 8 according to this link.

  Among the many changes coming to Windows 8 new computers designed for this is a change in the way we access BIOS of our computers. >>

  This allowed me to get into the bios and disable start-up secure and everything's fine.

• U410: Cannot access BIOS

  Hello

  I run into a problem with the Bios. A few days ago, I changed some settings in the Bios and now I can't access it. There is no support on don't enter to interrupt the boot, F1, or other buttons do not have Bios at startup. What can I do to enter the parameters of the Bios again?

  After the BIOS update I can access BIOS again

• Cannot access BIOS after closing down and also can not use change PC settings either.

  Hello

  I am wanting to access BIOS so I can restart the computer with windows 7, since I had nothing else problems with windows 8.1. It messed up my registry and now I can't use one of the windows in all applications, just the office part. (Computer worked fine with windows 8 before that I "upgraded", if you can call it.) So either no access to change PC settings and the BIOS keys do not work when you press during loading. Help, please

  Hello

  Try the following.

  Shut down the laptop by holding down the key SHIFT left click Shutdown to temporarily prevent a hybrid boot.

  Now on TAP the ESC key as soon as you press the power button to see if it will launch the Start Menu.  If this is the case, select f10 to open the bios menu.

  Kind regards

  DP - K

• Cannot access BIOS when OS disk encrypted w / Bitlocker, starting on the USB key is not unlock disc

  Hello

  I enabled Bitlocker on my Acer Aspire 5315. The system partition is encrypted and the data partition. My motherboard doesn't have a TPM chip, so I opted for the unlock with a USB key.

  When I start the PC or wake them from their hibernation, the splashboot (with the logo of Acer) BIOS screen does not display the information below on how to access the BIOS (press F2) or the boot menu (F12). And therefore I can't access those as I used to.

  BitLocker does not account for the USB key, then asks for the password to unlock the HARD drive. Then Windows starts very well.

  However, restart (by a Windows or after you have entered the wrong password Bitlocker too many times), the BIOS splash screen is normal (with how access BIOS and boot menu), I can access BIOS by pressing F2 AND succesfully Bitlocker unlocks the HARD drive with the USB flash drive without having to ask for the password.

  So, my question is how Bitlocker unlock the HARD disk automatically via the USB when the PC starts?

  Thank you for reading.

  Note: I posted this question on http://social.technet.microsoft.com/Forums/en-US/w8itprosecurity/threads they suggested that I ask the Acer support.

  Thank you also get answers in the TechNet forums.  I'm sorry that you were unable to get a more complete answer it.

  We suggest that you uninstall BitLocker and decrypt the drive to determine if this restores your ability to access the BIOS.

• Cannot access BIOS screens

  [Pavilion Dv6915nr, Vista 32] I can't no longer to the BIOS during the startup screens. It asks for a password, that he never had a. At one point, he shows a screen in French. I tried a BIOS update, but he refused to run.  Virus?

  Turns out it was just a BIOS battery dying.  Replaced and accessing BIOS very well.  No motherboard problem.

• Satellite Pro L850-1 p 8 PSKG7E-00C002EN cannot access BIOS at startup

  Hello

  I need to enable support of the VM in the BIOS so that I can runVirtual PC XP mode on Windows 7 professional 64-bit.

  I tried all the usual things but cannot get the BIOS to the top menu.

  Can anyone help?

  To access the BIOS, you will need to press F2 to turn on/off the unit.
  Press F2 repeatedly in the line to ensure that the key has been detected.

• Satellite Pro A120 - cannot access BIOS and install Win XP

  Hello

  I ve a Toshiba Satellite Pro A120, I installed an operating system Linux on ve and uninstalled.

  When I go back to the Windows XP operating system, I just couldn't access the Bios (event the i press F1, F2) and the computer cannot start the windows XP SP2 CD too but it starts windows XP 2001 CD

  Could someone help me please

  Hello

  To access the BIOS, you can try press ESC then F1.
  Pro A120 was equipped with the Toshiba BIOS and that is why the ESC and F1 should functions.

  To boot from the CD of Win XP you can also press F12 immediately after switching on the laptop. This will start on the screen menu and there you can choose the CD/DVD drive as the boot source!

  Welcome them

• Re: Qosmio X 870 - 15 d - cannot access BIOS

  Hi all

  I have my Qosmio X 870 - 15 d Win8 64 bits for 5 days now, since 2 days I can't access the BIOS (6.30), I have the first days; and yet, I did not put a password

  Please, any idea to solve this problem?

  We don t know exactly what is happening. Follow http://aps2.toshiba-tro.de/kb0/TSB2B03EY0002R01.htm and proceed to a complete stop. After this try to enter the BIOS settings.

  By the way: you have to enter the BIOS password or what happen when you try to enter the BIOS settings?

• Satellite A30 - update BIOS cannot access bios and no light to full charge

  Hello

  Like a fool I upgraded my bios (to 1.80) for Satellite A30 (PSA30E). I've noticed two problems.

  (a) during start-up I no longer get any what welcome screen and can not access the bios or boot from other devices - so if I want to boot from the CD now I can not - for example impossible to reinstall the operating system in the future

  (b) the battery suddenly was not fully charged and constantly hangs on 99% (apparently)

  (c) who knows what else could go wrong

  I'd like to undo what I've done, but it does not seem possible. How the hell can I solve it, since clearly the update of the bios is incorrect. Find a bios update file earlier (and how to use it)? Can I fix it?

  Someone at - it ideas?

  David

  Hello

  First may to ask why you have updated the BIOS. If everything works, the update of the BIOS is not necessary.

  OK, how have you tried to access the BIOS? Usually the F2 key must be pressed immediately after starting the laptop. You can try to press several times.

  But you can start from STRANGE on different ways. You can press C button and the specifications will enable booting from the drive or you press F12 and you choose the STRANGE as a source of start-up.

  I put t know why the power of the battery freezes at 99%, but you can try to remove the battery and wait several times. Then reconnect and check the status of the battery.

• Cannot access bios or UEFI in laptop upgraded

  System

  HP pavilion dv6-2190us

  original windows 7 64 bit operating system

  upgrade to windows install clean 8.1

  found and updated all the drivers

  victory entirely 8.1 update

  trying to enter in the settings of the uefi... no luck

  trying to enter in the bios settings... no luck

  haven't tried the f2 f10 f11 f12, f9 keys at startup no chance

  can someone help me

  on another note when I upgraded to the departure of the windows desktop 7, I was able to access my bios but for some reason, I couldn't not the realtek network card driver to work... so I wipe the hard drive of diskpart formatted and done a clean install all drivers installed with success but lost ability to enter in the bios or uefi

  Hello

  Shut down the laptop by holding down the key SHIFT left click Shutdown to temporarily prevent a hybrid boot.

  Now on TAP the ESC key as soon as you press the power button to see if it will launch the Start Menu.  If this is the case, select f10 to open the bios menu.

  Kind regards

  DP - K