HP Laserjet CP 1025 State of system tray is inactive.

Similar Questions

• LaserJet CP1025 Color - PC system tray stops working whenever I have send a doc to the printer.

  LaserJet CP1025 colour connected via direct USB for WINDOWS Vista 32-bit. I have the latest drivers, applications, and firmware for the printer, but the system tray stops working whenever I print a document. I tried this on Windows 7 via USB and get the same problem. Why does this happen?  I have another printer connected to the PC and I deleted all other HP drivers so that they don't interfere with the laserjet.

  Thanks for the update. I also found another thread where a lot of troubleshooting has been done, but the problem persists or is fixed only to reproduce:

  http://h30434.www3.HP.com/T5/printer-all-in-one-install-Setup/LaserJet-CP1025nw-HP-system-tray-has-stopped-working/TD-p/1226639

  I noticed it happens on XP, Vista and 7. I recommend updating the firmware first (if you have not done so) by going here:

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=LJ-86491-5&CC=US&DLC=en&LC=en&os=4062&Product=4052957&sw_lang=

  In addition, in the printer preferences, disable bidirectional printing, which is located by clicking right on pinter > choose Print Properties > click on the ports tab > uncheck bidirectional printing.

  Let me know if either of those who help.

• How to enable display of the State of the network in the system tray?

  How to enable display of the State of the network in the system tray?

  Hi barta75,

  Thanks for posting in the Microsoft Community. It seems that you have a problem with the display of the status of the network (on the system tray) on the computer. This can be very frustrating for you, and I appreciate the efforts you have put in. Let us work together as a team to get this number fixed.

  We start with a few questions-

  (1) you have the network on the system tray icon?

  (2) have you made changes on the computer?

  I would like more information about the issue.

  Method 1-

  I wish that you hover the mouse over the network icon and check the status of the network.

  Method 2-

  I would have you look at the article-

  Networking

  http://Windows.Microsoft.com/en-in/Windows7/products/features/networking

  Notifications and Notification area (Windows)

  http://msdn.Microsoft.com/en-us/library/Windows/desktop/ee330740 (v = vs. 85) .aspx

  In addition, see the article-

  In Windows network connection issues

  http://support.Microsoft.com/kb/313242#top

  We know if you need help. We will be happy to help you.

  Thank you.

• State of connection system tray icon incorrect or choosing bad network connection when it is connected to the internet with Windows 7.

  Hello people,

  My Network icon always shows that I'm connected wireless.

  If I disable my wireless, it becomes the symbol of ethernet.

  As soon as I turn on my wireless, the wireless icon appears once again!

  I am running Windows 7.

  My reports of cable 1 GB/s network

  My reports 65 MB/s wireless network

  Windows 7 allows you to select the slower wireless network that should not be the case.

  Under network connections, select advanced and advanced settings

  and change in order to make sure that the connection to the local network was the first.

  I've updated my card driver to the latest version of the software. I also uninstalled and reinstalled all network cards with all necessary reboots of the PC.

  Under properties of the connection to the network Local and the properties of the wireless connection

  I chose properties IPV4 & IPV6, advanced and set the ethernet connection for the metric of the interface of 10 and the wireless to a metric of the interface of 25.

  I did too...

  In the device-> network-> adapter Manager Intel Wireless-> properties-> tab power management-> uncheck "allow the computer to turn off this device to save power".

  Windows always selects the slower network ignoring the manual settings...

  He has never done this since yesterday. Please help me.

  In short, when the wired connection is used, the ETHERNET ICON must be on the system tray, and not on the Wireless ICON even if both are activated. This was the case for me two days ago.

  I don't know what to tell you. In my (wide as technician) experience, when there are two a Wi - Fi and connection the icon always shows the bars wireless.  Your computer seems to be an exception that I can't explain.

• Alienware Aurora R3: laserjet cp 1025 color

  After the new installation of the operating system and installing the drivers for my 1025 color laserjet CP I have an annoying problem.

  Whenever I want to print something and turn on the printer, it executes a HP Smart install which is I guess on a memory flash of the printer itself.

  Well I run, windows then States that the software cannot be installed correctly.

  Now, it's okay if I choose that the program is properly installed or choose install with good, anyway the same intelligent installation runs whenever once again I want to print something and turn on the device.

  Don't get me wrong after the installation of the printer works very well, simply, there is no use to do before, and it is a bit frustrating.

  Device is simply local USB connected nothing complicated here.

  Thanks for all the tips

  Chiel

  Hi @Chiel,

  Welcome to the HP Forums!

  I noticed that whenever you want to print something and turn on your printer HP Laserjet CP 1025, he runs a smart installation HP. I'm happy to help you!

  First of all, I would recommend to try our HP print and Scan Doctor, to see if he can fix the problem automatically. If this isn't the case, then please try the following in the following order:

  • Uninstall the software. Uninstalling the printer software.
  • Unplug the printer USB cable.
  • Clean boot the computer. How to perform a boot in Windows.
  • Disable all Antivirus programs. Disable Antivirus software.
  • Disable all firewall programs. Turn Windows Firewall on or off.
  • Create a new user account. Management of accounts of users and connections (Windows 7).
  • Reinstall using the printer HP install wizard for Windows. (Wait for the software to tell you to plug the cable).

  I hope this solves your problem and I thank you for posting!

  "Please click the Thumbs up icon below to thank me for having responded."

• Problem with the wireless on the system tray icon.

  Original title: wireless

  not found wirreless icon in the taskbar

  Hi Amourhbone,

  Thanks for posting your question in the Microsoft Community forum.

  It seems that you have a problem with the icon on the system tray wireless.

  I imagine the inconvenience that you are experiencing. We are here to help and guide you in the right direction.
  Provide us with a few details in order to better understand the issue.

  1. which version of the operating system are you using?

  2. deal with any problem with the wireless network using Internet?

  3. do you receive any error messages?

  4. did you of recent changes on the computer before this problem?

  I suggest you try the procedure described in the article and see if it helps.

  System icons do not appear in the notification area in Windows Vista or Windows 7, you must restart the computer
  http://support.Microsoft.com/kb/945011

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

  Get back to us and let us know the State of the question, I'll be happy to help you. We, at tender Microsoft to excellence.

• RESOLVED: The Task Manager icon in the system tray

  I always keep my task manager running as an icon in the system tray.  After an update of software that seems to be an update of Windows XP or IE7, I can minimize is no longer my status bar task manager system; the icon is no longer present.  I have not changed the settings view in the Task Manager bar; they are all checked.  Now, I have to keep the Task Manager minimized in the taskbar instead.  [None of the taskbar settings were changed to icons in the system tray as I downloaded the SP3 for XP over 3 years ago.]  Could it have been caused by the update or y at - it a way to get the Task Manager to reduce in the tray system again?  Thank you.

  I tried all types of features troubleshooting before coming here, including a full analysis of the antiviral software from my system & checking event viewer.  I even went in the registry to see if something happened to the system tray.  BUT... The action to be performed by the most obvious and which should have been the first, I failed to do - restart.  Due to an another software update of my antiviral package yesterday, 22/02/2012, I needed to restart.  After the reboot, the Task Manager icon returns to the system tray and minimization has not caused to disappear.

  The only thing I can conclude is that something has gone wrong during the update of the software of MS Windows and installation of KB2660456, KB2647516-IE7, & KB2661637.  It was the only thing that happens so that I was with MS Paint, no browser was opened or other software packages on except what is necessary to update the files over an internet connection.  To take a hit to what it was exactly would be silly because any number of operations might have bothered with or temporarily created a small problem with the properties of the view Task Manager.

  So I chalk it up to did not not the most basic 'Fixer glitch", reboot, in my haste to find a culprit.  I hope that my blunder will remind others not not forget to start with the basics for sudden failures troubleshooting.  Thank you for your time and your advice.

  [I'm sorry; [I broke each problem statement rule with this post by do not detail what I've done, this system that I have, and what software I use and their versions.]

• my computer has two network icons, 1394 and con LAN. Either, especially the icon of LAN began to move to items being passed in the system tray when I start the computer.

  I have a new and strange behavior on my computer. Until recently, the two icons, 1394 connection and LAN icons always used to appear in the whole system tray after the computer has been started. Is no longer the case. Whenever I start the computer, I don't see the icon of LAN but discover that it attributed to items passed. Then I open the properties of the network connection, uncheck 'Show the icon in the system tray', click Apply + OK, then I open the properties, check the box again, click Apply + OK; only the LAN icon is displayed in the system tray. I'd appreciate any help with this problem. The situation is sometimes the reverse case, i.e., LAN icon appears in the system tray, but I find the icon to connect 1394 points ago. I put the properties in the Start Menu, the toolbar always showed.

  Hi ErhanKarabekir,

  1. Did you the latest changes on the computer?
  2. You have security software installed on the computer?

  Method 1

  Refer to the article below and try the steps mentioned, check if it helps.

  How to troubleshoot missing network connections icons in Windows Server 2003 and Windows XP

  http://support.Microsoft.com/kb/825826

  Method 2

  If the previous step fails to them it is possible that some third-party programs installed on the computer is causing the problem.

  I suggest that you put the computer in a clean boot state and check if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See the link below to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

• Windows 7 starter system tray icon problem

  Hello

  Recently, I met a problem with my wifi icon in the system tray. At startup, the icon does not and continues to lead the blue sign loading. On right click, it turns into a different icon with a red x. To the left by clicking on the icon does absolutely nothing however other icons work perfectly well. The section in the control panel associated with networking also does not.

  I am able to access the internet on some sites. Some sites like hotmail etc do not load.

  I tried to reboot in safe mode, and there is no problem however, troubleshooting doesn't show anything wrong. Enter services.msc, there is nothing to slow down the computer.

  Anyone have any ideas on how to solve this problem?

  Thank you

  Hello

  Check out this article to see if it applies.

  After you wake a Windows Vista-based computer or a Windows 7 computer
  standby or Hibernate, the network icon and the speaker in the notification area icon
  do not display the correct state
  http://support.Microsoft.com/kb/937477

  -----------------------------------------------------------------------------------------

  You mean that icon Notification network near the clock in the lower-right?

  Right-click on the icon - problems.

  Also, there is an Animation setting it (probably not here), turn off then back on (twice).

  ======================================================

  Do a 1 Restore Point then you can go back to where you were if necessary.

  How to create a System Restore Point in Windows 7
  http://www.SevenForums.com/tutorials/697-system-restore-point-create.html

  How to do a system restore in Windows 7
  http://www.SevenForums.com/tutorials/700-system-restore.html

  ------------------------------------------------------

  References to Vista also apply to Windows 7.
  
  Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - writing version - click on Update Driver (can not do something that MS is far behind the pilots of certification). Even for network (NIC) card - then right click on the devices and UNINSTALL - Reboot - it will refresh the driver stacks.

  Now go look at the site of the manufacturer of the system for the updated drivers.

  After watching the system manufacturer, you can check the manufacturer of the device an even newer version. (Those become your fonts of rescue system manufacturer).

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers under Windows 7 (updated drivers manually using the methods above is preferable to ensure that the latest drivers from the manufacturer of system and device manufacturers are located)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  Download - SAVE - go where you put it - right click – RUN AS ADMIN.

  You can download several at once however restart after the installation of each of them.

  Repeat for network (NIC) card and is a good time to get the other updated drivers as Windows 7 like the updated drivers.

  If you update the drivers manually, then it's a good idea to turn off the pilot facilities in Windows updates, that leaves is to Windows Update, but it will not install the drivers who are generally older and cause problems. If updates offers a new driver and then hide it (right click on it), then go get new ones manually if you wish.

  How to stop Windows 7 automatically install drivers
  http://support.Microsoft.com/kb/2500967/en-us

  Stop Windows 7 to automatically install device drivers
  http://helpdeskgeek.com/Windows-7/stop-Windows-7-from-automatically-installing-device-drivers/

  How to disable automatic driver Installation in Windows 7 / Vista
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/

  Turn off Windows Update Device Driver search prompt in Windows 7 / Vista (for professionals,
  Ultimate and Enterprise)
  http://www.AddictiveTips.com/Windows-tips/disable-Windows-Update-device-driver-search-prompt/

  -----------------------------

  Allow you to reset your TCP/IP stack just to make sure:

  Start - type in search - ORDER - search box at the top of list and RIGHT CLICK – RUN AS ADMIN

  Enter these one at a time (or copy and paste) and press ENTER after each

  ipconfig/flushdns

  nbtstat-r

  nbtstat - RR

  netsh int Reinitialis

  netsh int ip reset

  netsh winsock reset

  Reset

  ---------------------------------

  Others.

  http://www.pctipstricks.com/tips-for-troubleshooting-network-cable-unplugged-error-for-wired-Microsoft-platform-PCs/

  http://www.how-to-hide-IP.info/2009/05/16/CYBERGHOST-VPN-fixing-network-cable-unplugged-error/

  http://www.annoyances.org/exec/Forum/WinXP/1109372091

  There are many causes, one of which is the small monitor pays attention to the evil network device. You can try to disable any other network such as WiFi device and reboot to see if that has an effect.

  Still a problem of equipment such as a loose network card that is not properly attached to the computer can cause this.

  http://compnetworking.about.com/od/WindowsNetworking/f/cableunplugged.htm

  I hope this helps.
  --------------------------------------------------------------------------------------------
  Rob Brown - Microsoft MVP<- profile="" -="" windows="" experience :="" bicycle="" -="" mark="" twain="" said="" it="">

• I only use Skpe occasionally, and I'm not always present in my system tray

  I just got a new computer (Windows 7), and it is time to reload Skype. But I very rarely use Skype, and I don't want to take up space in my system tray. I don't want it displayed every time that I reboot. Skype is VERY useful when I need, but I don't need that rarely. How can I fix it so it wouldn't be here unless I need?

  Open tools-> Options-> General settings. Uncheck the option: "Start Skype when I start Windows". Save the settings.

  To stop the Skype to run on your computer, right-click on the Skype icon in the system tray and select exit.

• Skyoe icon in the system tray

  Windows 10

  Skype 7.8.0.102

  The Skype icon in my system tray does not automatically change its status online when I turn on my computer. Instead, I have to right-click, coup in line and change it myself. Once it is on it changes its status from a distance and online automatically when I leave and return to the computer. What can I do so that it changes automatically online when I turn on my computer first?

  Thank you.

  Please download the latest version of Skype here:

  http://www.Skype.com/go/getskype

• No display in the system tray

  Yes... I do not have the sound display in the system tray where I normally see how strong the tones are when I adjust with the little weel on laptops from toshiba for the volume (simple, but good idea ^ ^)--i do not know why I see TI - if I click with the right button on the other system of symbols and go into the settings for them , I see, I have enable all (from 4) symbol system, except the volume symbol, who is nicknamed more gray, so I can't take it I see it in the system tray!
  How can I re-enable? (I also try a system recovery and search in the service-i do not get this button in my taskbar!)

  Hi mate,

  usually you will need to go to the audio properties and there is an option (check box) where you can check/uncheck the 'volume control see in the status bar"or something that sounds similar. : D
  This box should be ticked, and you have to press 'Apply '.

  That's all, there is no other options, just the one in the audio properties.

  Do you have sound?

  Welcome them

• Equium A60-191: application control status of the battery in the system tray?

  I had to reinstall XP. This has caused the loss of pilots and probably other things that I don't know.

  One of the elements lack seems to be the software or driver? for the battery. The battery is cooler at full power. The software located in the system tray used to indicate the power status and if it is ac or dc connected.

  Any suggestions that I need and where I can get to fix this, please?

  Hello

  I know you don t need the drivers or software for charge the battery to full power. Only what you need is the Toshiba Power saver utility.
  This utility is very useful because you can set different power for portable use different modes. For example, if you disconnect the laptop computer of the energy-saving AC adapter will automatically switch to the mode of energy that has been configured for the use of the battery.
  These methods help take care of the battery and increases battery life and it shows a battery status in the taskbar
  But there is nothing to recharge the battery witch.

  In my manual, I found a lot of info on the battery and how to manage the use of the battery. I think that the same information you will find in your user manual. Check it out.

  The last possibility is a malfunction of the battery.
  But in this case only a battery replacement will solve your problem.

  If you want you can try to check if the same thing happens with the new battery.

• NB200 - Notifications in the system tray area

  Every few seconds I get an annoying popup notification in the system tray area that informs me of the 'blocked events' these are events all IPv4 TCP or UDP. I really want to turn off these notifications, but despite a vast internet searching I can't find out how to do this. I tried the Action Center and tried the obvious firewall settings, but nothing will stop them. I find them very boring.

  I have a 12W NB200 running Windows 7 Home Prmium (a recent update from Windows 7 Starter Edition). -the problem occurs in both versions. Initially, I used installed but uninstalled McAfee security suite and am using 2009 F-secure Internet security suite for which I have a valid license.
  The system is connected wireless to my BT Home hub router and is connected through the homegroup for two PC. The other two computers are connected through ethernet cables to the router and both run on Windows 7 Home Premium with Avira internet security. I don't get the pop-ups on these machines.

  Any help would be greatly appreciated

  AE

  Which program generates alerts - are you sure its f-secure or would it be the widows firewall or mcafee? I don't know anything about f-secure (other than I couldn't find a manual 2009 on their website), but I would say that it will keep a diary of events and when you get close to the 'variant' that appears (and I expect clears) you will also find an option on the display of the event.

  Re my comment about this program is-are you happy that you have removed any trace of mcafee? Have you run msconfig and looked at the services and startup for any trace tabs? Also look in the Manager of tasks for all traces: in the services tab, click description to sort and search for mcafee from the similar description in the process but I think that you would have never had 1 entry of mcafee.

  I think that this should have been the first para. Have you created/modified the firewall rules? The log file must provide the ip address of the event source and which is in the range of ip addresses of your network domestic? and since you are a bt customer internet you have a bt vision pvr and who is the source?

  Post edited by: peterk_1

• System tray clock

  I have a HP Pavilion laptop with Win7 - 64 Home g6.

  The clock in the system tray is not keeping time. It stops at the time that I finally used the laptop.

  Any suggestions on what else to try?

  And also computer stop in middle of a session.

  Follow the instructions in the link that I provided. The sheep of dust on the \exhause of admission and the fins of the heatsink cleaning CPU\video may well resolve the shutdown problem that you are experiencing.  Which is probably caused by the higher than normal time CPU. It is certainly not a good thing.

  The RTC battery should be replaced so that the chip of the BIOS CMOS hold real time clock settings.