HP Laserjet IIIP shots.

Similar Questions

• windows Vista HP laserjet IIIp premium edition error printing

  I have a HP laserjet IIIP printer and use windows Vista premium edition.  I used to be able to print fine, then one day could not.  I can print a test page for the printer, but I get an "error" in the Print Manager on the docs, I try to print from the PC.  I tried to restart, unplug, check for bad drivers, checked all cables, etc.  Any ideas?

  Hello

  Please uninstall the printer driver from the Device Manager and the Add/Remove programs. After this try to install it again.

  http://support.Microsoft.com/kb/283658

  LaserJet IIIP drivers are available through Windows Update.  Go to start, devices and printers, adding a printer, select the appropriate port, and then click Windows Update.  After a few minutes, the list will repopulate, then select HP (Hewlett-Packard not) and select the appropriate driver.  Note that you need a suitable driver for your cable USB / parallel.

  Let me know if the above information is useful

• LaserJet IIIp accordion pleated paper

  My LaserJet IIIp was a special paper feeding problem.

  It feeds paper out of the slot to eject before without problem, but out of the rear slot, the last third of each leaf looks like a sweet accordion fold or pleated in flange.

  The problem is definitely in the last set of rollers.

  If I eliminate these rolls the feed is good, but the leaf does not come completely out of the machine. (I ran some tests with the lid removed to prove that the entire sheet is printed and smooth (and) all the rolls before the last series comes...

  I don't understand why the first 2/3 of each sheet comes out of the printer smoothly but the third last undulations.

  Does anyone have a suggestion as to the cause?

  Nice to see that some HP products are capable of longer than a few years.

• Laser HP LaserJet IIIp printer driver available in Windows 7?

  Search for contradictory information.  The HPIIIP driver is available in Windows 7?

  ... The HPIIIP driver is available in Windows 7?

  As an alternative to the HP support site, you should be able to get the correct drivers from devices and Printers' add a printer and Windows Update. The printer is available as HP, HP LaserJet IIIP.

  1. Click Start or press on the then select devices and printers from the list on the right. When the devices and printers windows opens and fills, click Add a printer among control options at the top.
  2. To open the Add Printer window, first select Add a local printer. Then select a port and click Next.
  3. In the next window, then click the Windows Update button and wait a few minutes until the list is filled again. It will look like nothing is happening, but it's work. Once the lists are updated, first select the manufacturer HP and HP LaserJet IIIP , choose from the list of Printers . Note that HP LaserJet IIIP is in alphabetical order after the 3xxx HP LaserJet entries.
  4. Click Next and enter a name for the printer.
  5. When you click Next must install the printer driver and you'll end up with the last screen where you can run a test print.

• HP iiip: IIIP HP and windows 8.1 (or 10)

  Can I use my printer on my computer windows 8.1 hp iiip?  I read the notes on windows 7.  Dell support said that it will not work with Windows 8.1 or on 10.

  Hello

  The printer HP Laserjet IIIP do supported on Windows 8.1, it's drivers are available through Windows Update.

  Follow these steps to install the printer on a PC of Windows 8.1:

  http://h20564.www2.HP.com/hpsc/doc/public/display?docLocale=en_US&docid=emr_na-c03470332#N100AA

  As a reference, you will find the table according to which list all types of driver available for Windows 8.1:

  http://h20564.www2.HP.com/hpsc/doc/public/display?docid=emr_na-c03365145

  Windows 10 will be released only in July 29, 2015...

  No compatibility information won't become available release date before the BONE official (and maybe more later as well), so you will have to wait until this information is available in the future.

  Kind regards

  Shlomi

• Error 0 x 00000709

  Hi all

  Here's my problem: I need to make it compatible to a script on Windows 7 x 64 (script ok on Windows 7 x 86).

  This script create virtual printers on computer, to redirect the flow on printer connected by USB to computer.

  When I am executing script, I got error 0 x 00000709.

  Here are some of my code in the national statistical institutes:

  Section "VirtualPrinters" SEC01

  ${EnableX64FSRedirection}

  SetOutPath "$TEMP\drivers_hp_platine_64".
  SetOverwrite ifnewer
   
  File/r/x 'thumbs.db' "drivers_hp_platine_64\."

  StrCmp ${PCL_VERSION} HPIIIP_PCL5 5 HPIIIP_PCL6
  HPIIIP_PCL5:
  ExecWait ' rundll32 printui.dll/if/b "HP IIIP" /f "TEMP\drivers_hp_platine_64\prnhp001$.» INF"/ r" lpt1: "/m"HP LaserJet IIIP"/ z, u, y, q ' $0
  GoTo HPIIIP_PCL_END
  HPIIIP_PCL6:
  ExecWait ' rundll32 printui.dll/if/b "HP IIIP" /f "TEMP\drivers_hp_platine_64\prnhp001$.» INF"/ r" lpt1: "/m" HP Color LaserJet 5500 PCL 6 "/ z, u, y, q ' $0".
  GoTo HPIIIP_PCL_END
  HPIIIP_PCL_END:
  DetailPrint "Install the printer HP IIIP $0"
  ${LogText} "installing printer HP IIIP $0."
      
  ${EnableX64FSRedirection}
  ExecWait "rundll32 printui.dll /Xs /n"HP IIIP"ShareName"HPIIIP"" $0
  DetailPrint 'Definition of sharing the printer HP IIIP $0'
  ${LogText} 'Definition of sharing the printer HP IIIP $0 ".
      
  ${EnableX64FSRedirection}
  ExecWait "rundll32 printui.dll/y/n"HP IIIP"" $0
  DetailPrint "default printer: HP IIIP $0.
  ${LogText} ' default printer: HP IIIP $0.

  I already changed my driver for x 64, and the code is just the same as the x 86 version.

  I was really searching for several times, but nothing about my situation.

  So, I ask you, finally.

  Thank you in advance for the input and responses

  Hi Noel,

  Thanks for posting your query in Microsoft Community.

  However, your question is beyond the scope of what is generally answered in this forum of consumer and would be better suited for the IT Pro in MSDN public.

  Please post your question in the MSDN Forums.

• LaserJet 200 ColorMFP M276nw: Cannot scan computer, but can print

  In recent weeks, I am not able to scan more my computer using HP scanning. I can always print from my computer. It doesn't matter if my computer is connected to my WiFi or cable network. My printer is connected to the network cable.

  Scanning was not a problem until a few weeks ago. I do not know what caused change this situation.

  The message that appears on the screen of my computer says "HP LaserJet 200 colorMFP M276nw-AirPrint is is not available...". ». The reference to Airprint intrigues me.

  If anyone recognizes this situation and / or has a solution?

  Thanks for providing the screen shots Gvmdh_Hbl.

  Still looks like the driver is installed for the printer. Your lack of print and Scan in the printers and Scanners window tab.

  Here is a screenshot of what it should look like.

  

  Repair disk permissions and resetting the printing system to see if it helps.

  Fix permissions of the drive on the Mac:

  Close all applications.

  In the Apple menu, click OK, click Applications, and then click utilities.

  Double-click disk utility.

  Highlight your hard drive / partition on the left.

  Click on check and then repair disk permissions.

  Restart the computer...

  Reset the printing system:

  Note: This will remove all printers in the print and Fax/Scan, any printer deleted can be re-added later by clicking the sign plus (+) symbol.

  Click on the Apple icon and then click on System Preferences.

  Click on Printers & Scanners.

  Make a right click (or Ctrl + click) in the left white side panel, and then click Reset printing system.

  Click OK to confirm the reset.

  Type the name and the correct password.

  Click OK to reset the printing system.

  Then click on the sign to add the driver, highlight the printer +. (you may need to click the drop down menu to select the name of the printer) Then click the Add button.

  If you're still having problems, I uninstall and reinstall the printer software.

  Uninstalling the printer software.

  HP LaserJet Pro 200 color M276 Full Feature software and drivers.

  Please let me know the results.

  Thank you.

• HP LaserJet P1505n, connected by Ethernet cable, all of a sudden cannot get an IP by DHCP.

  My HP LaserJet P1505n, connected by an Ethertnet to my LAN, has worked flawlessly for the past three years.  The last time that I shot it, he could not get an IP by DHCP.  I checked by printing a self-test page.  The IP address is 0.0.0.0.  I looked at the page self test three years ago and I saw that the IP address is 192.168.0.100.

  No recent changes have been made to my network.  I checked the Ethernet cable and connect to my router were very well by changing the Ethernet cable with a laptop.  The laptop worked with two cables and connections while the printer did not work with a configuration.

  Suggestions (not to mention that trying to deal with HP support - a catastrophe) would be greatly appreciated.

  Thank you very much for your timely response. This morning, the problem itself. I have a few computers on the network. The two I tried to print from, running WIN XP and the other running Ubuntu Linux. When any printed a test page, I checked the list of DHCP clients on my router Belkin (unknown model) and found that the printer was not present. It is while I printed the test page and found the IP 0.0.0.0. That was the case Saturday last until last night. This morning, I checked the list of DHCP clients again and the printer (miraculously?) appears in the list. I left the system all night and can't explain why she came back the printer works normally on computers and operating systems. To answer your other questions, all the lights on the printer and the router seemed to be turned on normally throughout this whole ordeal. On the printer, the green light was on and the amber light flashes occasionally. It is another mystery that me baffled. Finally, when I swapped the Ethernet cable, it's the printer not on the router. Who's going to change the port on the router. No configuration has been working on the printer; However, the two worked using my laptop. I was not looking for a hard reset as you suggest. I turned only the printer works without having cut the power. If the problem recurs, it will be the first thing to try. Thanks again for your response. If you have other thoughts, I'd love to hear them. My wife has managed to pick up a HP Deskjet 3050 to a market with no documentation. I'll try to install it on my system very soon. I may come back to this forum. Finally, I withdraw my comment about the HP support. I'm pleasantly surprised that an employee of HP replied.

• EPrint registration don't DO NOT WORK in HP Laserjet 200 M276 PCL6

  I bought this printer and its only to be able to print on the shot, but the Web ePrint service or better allow the same won't work.

  The printer is HP LaserJet 200 colorMFP M276nw PCL6, serial number is CNF8G6S398, the support of the computer is a notebook of EEE from Asus with Windows 7 Home Premium Service Pack 1.

  Update the firmware to version 20140521 (version 20140718 does NOT work) to see if it was a problem of firmware, the problem remains the same, it does not via the Server Web integrated in my browser, either from the control panel of the printer, this code, you may not have.

  The printer works regularly in the local network, here in this link all the configuration parameters (the firmware has been updated as shown in the link is old, but the rest of the configuration is the same).

  https://drive.Google.com/file/d/0Bx7PIMyN30XKenQ5YnJSbkFLQzA/view?USP=sharing

  I'm really frustrated, three days of work without being able to allow that the only feature I really needed.

  Problem solved by Jerebko (very thanks) to this thread

   

  http://h30434.www3.hp.com/t5/Printing-Issues-Troubleshooting/Eprint-amp-LaserJet-Pro-276nw/m-p/4738076/highlight/false#M115390
  

  

• LaserJet CM1415fnw: Continuous CM1415 ti indicate "low memory canceling the job."

  I've owned the printer since 2012, and until recently, I had no problem printing, with the exception of an I-Phone.  I tried to print my Nexus 9 Tablet and my HP laptop and get only "memory low, canceling the job."  I loaded the document file from one page to a flash drive, plugged into the printer and try to print from USB with the same result.  I shot it works and reset the default printer, nothing happens.  What to do next?

  The Configuration report I have 160 MB of memory with 80.4 MB of available space.

  Hey @Bulldog74,

  Welcome to the Forums of HP Support!

  I see that you are having problems with a low memory error when printing to the printer Laserjet Pro CM1415fnw. I can help you with that.

  To start, make sure that the printer is plugged directly into a wall outlet, not a surge protector. Once that is done, try to print. If you still see the error then when the printer is on, remove the power cord at the back of the printer for one minute and try to print.

  Please let me know the results of the rest of the foregoing. If you can now print, click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• LaserJet professional M1217 nf: cannot scan over network with a printer laserjet 1217 on a Mac

  Hello

  My set up:

  Mac with Yosemite

  LaserJet M1217 more wireless

  Description of the problem:

  I can't scan. Preview, the control panel or image capture, I get the same error saying "cannot open a session.

  I have installed and reinstalled the drivers/printer about 100 times.

  I tried to add the printer/scanner like airprint, or with the name of the printer as a proposed post.

  Just what causes the same error.

  I have the 2.0 version of the driver installed right now. Tried with 1.7, same result.

  I can print without problem since my Mac and my iPad.

  Tried it with an ethernet cable and have the same problem in case someone ask.

  I looked all over google and doesn't seem like someone else has the same problem? Many people have problems printing over wireless, but it's ok for me. Is the scan, I can't go to work.

  Pages of HP does not offer any other driver which has of the Yosemite. HP offers no additional program for Mac and scan.

  Don't know what else to try.

  Little help? Anyone?

  Thanks Geminy02,

  Unfortunately, your suggestions did not help, and I have a few comments about them.
  First of all, your suggestion about the router was the problem is quite impossible, as you will need to check if the ports are open only in the case we're talking about two different network segments. If you have your printer and your computer in the same segment you will have problems of ports.
  Second: if I would have chosen IP protocol to add my printer, I wouldn't take the option scan, as you said, which means I could not done any tests that I mentioned in my original post, and I would never have had to the point of getting the error message.
  Thirdly: the drivers that you MENTION for download are exactly the same as you get with yosemite, so, this could help to reinstall the driver, it's kind of a long shot (and yes I tried).

  In fact, I managed to solve my problem by doing a factory reset of the printer, any sign of a printer in my computer, cleaning and reinstall the printer using the airprint driver suggested by yosemite where to find my bounjur printer.

  I tried ro think what could be the reason, or to see all what I had changed, and the only thing I've seen different in the configuration before and after he started to work was the name of the printer. When it did not work my printer was called simply "printer", when he was working he was the full name that comes by default. It would be very strange, that this is the reason, but I just mention it here just in case someone read. I believe that the factory reset was the difficulty, not the configuration itself.

  Just for the other readers, I can confirm that this unit can print and scan over my wiresless and cable network on yosemite, with the help of preview, capture image or scan property in the control panel. It took me several hours to make it work, but it does, and my best friend was all the time the printers web page, where you can change the configuration of the printer.

• LaserJet CP1025 ns: HP sytem tray stopped working

  As soon as I turn on the printer, and he finished his process of starting, I get a message that "HP system status bar stopped working.  The printer seems to print fine, despite everything. However, I had a problem with the tasks of a new cartridge and tried to run the clean program Page and discovered that the icon of the device setting is not in the Windows system tray, and so I could not access the Page clean process. So I was wondering what else could be missing its shot upward.

  I reloaded the driver. HP system tray works more or never start.

  I followed a thread that suggests to disable the bidirectional printing setting, but none of the directions did what I saw in the properties of the printer.

  Someone at - it suggestions?

  Hi @JR-37 ,.

  I see that you get an error message for the "HP sytem tray stopped working. I will definitely do my best to help you.

  Try the following steps to see if it will solve the problem.

  Uninstall the software. Printing software uninstalled.

  Download and install the latest version of Adobe flash player.  Adobe Flash Player Support Center.

  Install the base driver. Base driver HP LaserJet CP1025.

  Update the firmware of the printer. Firmware Update utility from HP LaserJet Pro CP1025nw color printer.

  If you need help, let me know.

  Good day!
  Thank you.

• LaserJet P1102w - lack of printing problems and sleep-wake duplex in ML

  I have my printer installed via AirPrint, the latest firmware and all that.

  However, the attempt of Apple to a driver treats this as a very basic printer, and I can no longer print double-sided. There also problems waking up to print if it has not been used for some time. I have to turn on the printer, cancel jobs, place them again and hope it works. Sometimes it takes two or three attempts.

  When will they be available for Cougar your real drivers? I want that my printer to work as if it was in SL and Lion.

  Chris

  No, this isn't

  When I run the setup I get to step 'Select device' and the printer does not appear. I connected it via USB for it and still nothing. I removed the printing device configured to AirPrint and the same thing. I installed it using the generic 'PCL' profile via the port USB, and the installation program still shows nothing.

  However... I returned to the page produced and found another download

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=bi-80684-8&cc=us&DLC=en&LC=en&OS=219&product=4110396&sw_lang=

  It is for 10.4 to 10.7, but I gave it a shot. Updated the firmware on my printer (again). Now I can add the printer as "HP LaserJet Professional P1100w, 5.0", and the duplex option is enabled and works!

  If this page needs updating to include bones x 10.8. I don't know why it says version 8.0 when the control panel no longer reports as 5.0. Whatever, I print double-sided once again.  I'm a happy camper

  Chris

  PS I am that mark it as resolved because it was in a roundabout way, but not with the link you provided.

• Windows 8.1 does not speak for Color Laserjet CM1312

  After you have installed windows 8.1 my Color Laserjet CM1312 printer and pc are not communicating.  Tried several drivers update. They do not install. What can I do more?

  PS this post and his response were separated from the other thread and edited its about. -Hp moderator of the Forum

  We would need to see an error or a Setup log message before we can give you some useful suggestions.  Setup logs is normally displayed somewhere as C:\Users\username\appdata\local\temp with a name of the hp type... install... Newspaper.  If you can find one of those that we then validate and share so we can review and tell you what is happening.

  Otherwise, you have to do your best to clean your computer and start again.  I assume you mean that you upgraded the operating system of the PC which worked previously, not put in place a 2nd accidentally broken computer connect to the 1st old PC.  If this is the case then it is more than probably a file conflict somewhere on the hard drive that needs to be cleaned before installing the new drivers.  I would suggest wiping the machine everything related to the HP printer, starting by the devices and Printers window, the properties of print server and driver tabs and the C:\Program Files directory.  Once all old Referances are removed you should have a good shot at a successful installation when you use the latest software Win8.1 of http://support.hp.com.

• Lack of shot-up music/Audible in iOS 10 controls

  As a regular sound listener, I regularly used blow-up controls music on pause or go back as you drive an audiobook to keep my GPS map display on the screen. Since the update to iOS 10, shot-up music control buttons disappeared. Unless there is a more simple solution, I spend Waze audible, which is much more distracting and may be dangerous. Has anyone here found a solution?

  Hello chemess,
  Thank you for using communities of Apple Support.

  I understand your message that you want to use the audio controls in the control panel to control your audio books using a GPS navigation app. I understand your desire to not have music controls in the Panel. Controls the music is accessible from the control panel by opening Control Panel and slide the Panel to the left.

  Control Center to use on your iPhone, iPad and iPod touch
  

  Swipe Control Center left to play quickly, pause and control the volume of your favorite song, podcast and more.

  Best regards.