HP Laserjet m401n will not automatically select the right tray

Similar Questions

• NB500-108 does not automatically select the boot device

  Hello

  When I start the computer (NB500-108), it gets as far as the "Toshiba Leading Innovation" screen and stops. It will allow me to select F2 and F12, but I have to do it EVERY time I start the computer. It seems that it will automatically select the HDD/SSD drive and I can't find in the start menu anyway to fix this problem.

  I tried running repair of the boot from the Windows 7 repair disc and even if it is said that there is no problem, I would consider it a problem.

  Any help would be greatly appreciated.

  Thank you

  I have same NB520 and I ve never done in this situation.
  Try it please to the value of the default BIOS and check if the problem persists.

• "My Media" will not play on the right side of the screen

  I am currently working on a music video, and I'm trying to test - Watch clips from 'My media' to make sure they are what I want before putting them in the timeline at the bottom of the screen. The problem is that these clips are not displayed on the right side of the screen more. When I first load iMovie, they do, but then after that I look at some of my video in the timeline panel, right screen seems to be stuck on this and will play not the clips of "My Media", although I can hear the audio. It's very frustrating, because I'm basically at a point where I have to restart iMovie after each clip that I add to my video. Any help would be amazing.

  This is the first posting, I have seen with this problem. I can't duplicate although I do not see a hesitation before the video plays in the Viewer when I move the playhead on timeline to the media browser. I suggest you open iMovie, hold down the command and option keys and the removal of preferences in the window that opens.

• Pavilion E017DX: Keyboard Pavilion E017DX will not automatically detaches the Instructions in the manual will not work

  (It is not relevant to OS)

  I have very very alert followed the instructions in the manual 'for laptop HP Pavilion 17"downloaded from the HP website.

  There was no ambiguity on the two screws to remove to release the keyboard.

  However, after releasing their (and, of course, carefully following all prior instructions as well), the keyboard will not loosen, it remains as tight as a tick and is not even remotely let go.    All that happens when I "insert a thin tool into the output port of the keyboard and press the back of the keyboard" as indicated in the manual is that the "." key (period) comes off!

  There is also a hole size of finger under the WLAN (not mentioned in the manual) that is labeled clearly communicated keyboard (engraved on the metal).    Pushing hit as firmly as possible without risk of breaking the computer accomplishes absolutely nothing.    The keyboard still not loosen.

  Something seriously missing in the instructions and/or the design of this computer is seriously insufficient.   My next computer will not be a HP.

  PS: I got a lot of experience in the repair of laptops of all kinds.  Lack of familiarity with the technology of the laptop is not the problem remotely.

  Usually, you will have to lift the loose keyboard around the edges while pushing from the rear. I hope that this video will help: Remove keyboard

  If you found my answer helpful please say thank you by clicking on the icon cursor.

  If my answer has solved your problem please mark as the "acceptable Solution". Thank you!

• Photosmart premium will not print from the main tray

  I have a HP Photosmart Premium.  It won't print or copy from the main tray.  Despite the fact that I specifically designated main tray settings, he continues to try to print from the photo tray. How can I fix it?

  My recommendation would be to define the default values for what you do most often.  You can assign the parameter of the bins to automatic and the printer should draw the correct tray based on the other parameters of size and type of media.  If you experience problems with the automatic selection of tray for a particular document or a picture, you can specify the drawer wished for this print job.

  I'm a link the User Guide for your printer.  Click here  I thought you might find useful.

• Photosmart Premium c310 will not print from the photo tray. Market power does not work.

  HP Photosmart Premium c310 refuses to print from the photo tray.  I use an iMac.  I shot tray in and out, nothing.  I stoked market, nothing.  Whenever I try to print a photo, it pulls the main tray.  He doesn't even try to pull the photo tray.  And I select in the settings of Photo paper in the photo tray.  Oh, and I have never tried to print before photos.  This is my first time and it won't work.  Printing regular documents from the main tray works fine.   Can someone please help?

  Are you printing from iPhoto?  If so (and this may apply to other applications), you must specify the format and print size.  Make it look like this:

  

• USB Wizard will not automatically install the usb/flash drives

  Hello

  Working on a laptop, I have a strange problem. Insertion of a usb device (disks hard usb flash are all that I tested) opens the new hardware Installation Wizard.
  If I choose "Install the software automatically", the wizard still fails. If I select "Install from a list or specific location", then choose as location c:\windows\inf, it still works. The wizard should not be checking this place on its own?
  Things I've tried:
  -Reinstall the USB devices in Device Manager
  -Microsoft Fix it 50052
  Gateway, MX6441 laptop
  Windows MCE
  Service Pack 3
  All the important updates installed
  Any ideas would be appreciated.
  Rick

  Hello

  It seems that Windows loses somehow USBSTOR.xxx files in the C:\Windows\INF folder. You can simply copy them from (C:\Windows\System32\DriverStore\FileRepository\usbstor.inf_x86_neutral_83027f5d5b2468d3) to C:\Windows\INF, and that might solve the problem.

• When I try to burn a video with windows media player, that it will not automatically to the window where add item option is available. Why?

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  You try to burn a video DVD? If_yes_that is not supported
  by Windows Media Player, try using Windows DVD Maker.

  The following items may be worth a visit:

  Burn a CD or DVD in Windows Media Player
  http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-CD-or-DVD-in-Windows-Media-Player

  Burn a CD or DVD in Windows Media Player:
  Frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-CD-or-DVD-in-Windows-Media-Player-frequently-asked-questions

  Windows Vista - Windows DVD Maker - burn video disc
  http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-DVD-video-disc

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• clock will not stay at the right time

  I keep changing my clock to the correct time manually and with internet synchronization, but it continues to change, so there is an unsolved problem.  Any ideas on how I can fix this problem.  It prevents my emails and the time stamp is incorrect in outgoing messages.

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  If time is lost when the computer is off, it's probably the battery on the motherboard that needs to be replaced.

• Windows 7 - date/clock will not automatically be synchronized with the internet time

  Windows 7 - date/clock will not automatically be synchronized with the internet time

  Please help me solve this problem...

  every time I can't manually change the date and time...

  If the time server internet will not synchronize the clock, select 'Change settings' and choose a different time server from the drop-down list.

• Had to do a restoration complete my xp machine and will not update, in the past, system automatically updated with cartridges of siema etc service?

  Had to do a restoration complete my xp machine and will not update, in the past, system automatically updated with cartridges of siema etc service?

  What is happening, it is that it is so more the possibility of a user friendly hands on automatic update of Windows XP from a clean install.  Windows Update will NOT synchronize with and updated in the current order status to update a machine with a clean install of XP, but you separately download some patches and intermediate updates and apply them manually, to have a machine that connects a bit normally with Windows Update.

  Install the last update cumulative security for the version of Internet Explorer you have currently is essential, and you need to download separately and install it before going any further.

  http://support.Microsoft.com/kb/2888505

  Scroll to the information file for XP and Server 2003

  Download the file corresponding to your version of Internet Explorer and install first.

  It is also highly recommended that you install Firefox because IE8 is limited, probably compromised and sometimes useless and will crash on many sites, including Microsoft sites, including linked just above.

• My computer will not automatically updated, even if it is enabled. I get the error message #0 x 80070424?

  My computer will not automatically refresh. I went to ensure that this automatic update is on and it is, but it won't let me update. Whenever it comes up with error #0 x 80070424. Is there a way I can fix this or do I need to take it for repair?

  Hi DebbieVondervoort,

  You did it of any material changes or software on the computer before this problem?

  This problem occurs if a service that is required for Windows Update or Microsoft Update is not registered.

  You can follow this link and check if the problem persists.

  Error message when you use Microsoft Update or Windows Update Web sites to install updates: 0 x 80070424

  Hope the helps of information.

  Please post back and we do know.

• Have windows 7 64 bit, andf Intuit quickbooks pro, Amyuni PDF printer will not save to the PDF format. Message from readings of intuit library printers 'could not print to the printer. Check your printer selection. Impression was canced from another progr

  Have windows 7 64 bit, andf Intuit quickbooks pro, Amyuni PDF printer will not save to the PDF format. Message from readings of intuit library printers 'could not print to the printer. Check your printer selection. Impression was canced from another program.

  Hi rkusa1,

  Thank you for using Microsoft Windows forum

  QuickBooks worked very well under Vista? It should also work reliably on Windows 7.

  However, you may want to follow these steps.

  1. right click on your quickbooks start exe file and open properties.

  2. on the Compatibility tab, select the compatibility mode and run this program in compatibility mode for Windows using the following link: http://windows.microsoft.com/en-us/windows7/Make-older-programs-run-in-this-version-of-Windows (only if she worked very well with former Windows operating system)

  3. the control privilege level "Run this program as Administrator". Press apply/OK to close properties.

  4. start - devices and printers - add a printer - add a local printer - create a new port - local port and name it QBD_PDF.

  5. Choose install AMYUNI Technologies - Amyuni Document Converter 300 (click the button update windows if it is not on your list).

  6. If windows detects you already have a driver and then choose to replace the current driver. The printer name Quickbooks PDF Converter - do not share the printer - NOT set as the default printer. Finishing

  7. start right click - devices and printers - printer QB, choose printer - properties and go to the Advanced tab.

  8. remove the checkmarks in the 4 elements with square next to them (lower part of the screen) boxes, and then select "Print directly to the printer" press OK to close the window.

  9 restart you computer and open Quickbooks. Open the file - printer installation and make sure of Quickbooks PDF Converter is selected for any operation PDF printer that you use frequently. (on rare occasions, you will see not of Quickbooks PDF Converter on the list, reboot again and you'll get it).

  You can now perform operations of PDF in Quickbooks (works for 32 and 64-bit Windows 7)

  For a similar question, see: http://social.technet.microsoft.com/Forums/en/w7itproappcompat/thread/2bd30024-0a64-4f6b-a831-8cb7c1e4cce5

  If the steps above do not post your question in this link: http://community.intuit.com/quickbooks

  Kind regards
  Aziz Nadeem - Microsoft Support

• Why my selected image will not appear on the chassis of the big money develop?

  Why my selected image will not appear on the chassis of the big money develop? It appears on the left side, but I see only a blue box with an X in the middle of the big Frame in the Center?

  Go to your Lightroom preferences, performance tab, uncheck the box use the graphics processor.

• LaserJet CM2320 will not complete install on Windows 7

  Printer laserjet cm2320 will not complete installation, when I use the original product CD.  There are several different downloads for Windows 7 (64 bit) on the HP site for the laserjet cm2320 multi function printer, then where exactly should I use (and which are the most up-to-date)?  I've seen several posts of 2009-2010 on install problems with Windows 7 - with none of the real solutions to the cm2320 - and I was wondering if there was a fix yet.  The printer (2320) appear on my PC (which ran on Vista before my recent visit to Windows 7) and will print with USB cable connected to the printer, but the ends of the installation on the original CD before the wireless configuration, etc. can take place.

  DBaum

  Follow the link I post below, select the operating system that you use and that you choose the correct download. I would like to know if it works!

  http://goo.GL/4z2WS