HP LaserJet Pro 400 (M475dn)

Similar Questions

• Low memory on LaserJet Pro 400 M475dn

  Hi I keep getting an error message on the printer saying low memory every time that I try to print the PDF and then it cancels the print job, I get errors when printing pages or e-mail documents and were previously able to print PDFs without any error.

  I'm running OS X 10.8.4, and I think the connection is wired LAN

  Any help would be appreciated

  Anastazia

  P.S. This thread has been moved from Laserjet products Compatible Macintosh - HP moderator Fourm

  Hello, Gregory,.

  As you mentioned that you were previously able to print PDFs with success, so the first point, I think it's if you print all the complex work now or if the error is found only some files or certain pages in the file.

  Try to simplify the job so it's actually too complex for the device to treat.  If a particular page or a few pages containing complex images or charts, then you try to print these separate pages to other pages.  Another way to simplify the work could be print pages in small groups (Group of 5, 10, 15 pages according to the total number of pages in the job & error frequency/symptoms).

  Other major steps that you can perform are:

  1) updated firmware to the product (whether the product is using the older firmware) using HP web link (applicable for MAC OS)

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en & cc = us & prodTypeId = 18972 & prodSeriesId = 4337543 & prodNameId = 4337754 & swEnvOID = 4142 & swLang = 8 & mode = 2 & taskId = 135 & swItem = t2-106955-2

  2) upgrade printer drivers with a comprehensive software solution that is available on the following HP

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en & cc = us & prodTypeId = 18972 & prodSeriesId = 4337543 & prodNameId = 4337754 & swEnvOID = 4142 & swLang = 8 & mode = 2 & taskId = 135 & swItem = t2-107480-1

  I hope this helps!

• Help! My M475dn MFP HP LaserJet Pro 400 color printer will NOT print!

  HP LaserJet Pro 400 color MFP-M475dn-CE863A

  Printer on a network and can connect to multiple computers that include: Mac OS X, Windows 7 and Windows XP.

  When I try to print from my iMac, the print queue of the printer says "the printer is not connected.  When we try to print from Windows computers, it is in the right queue and does not print.  When I go the printer itself and try to print a page of demonstration or page supplies directly to him, it says on the screen which is printed, but nothing happens.  This is not hum or anything!  The port where the network cable is connected is switched on green that says HP which means that the network cable is connected.  We've had this printer for a year now, and something like that never happened.

  I did not have any software or anything like that until this happened.  It was working fine on Saturday when we used it, but when we arrived at work today, he just decided that it would interrupt printing!

  I'm puzzled!  I tried 'ping' IP address of the printer from my iMac and it pings fine.  Does anyone have advice?

  (I tried to make of the obvious like too switch the printer on and off and shutting the computer down and nothing!)

  Okay, so I feel a bit stupid right now.  I decided that I would be closed the printer for about an hour to see if it was there, and what you know-it has been!  I had to turn it off several times before but I guess it wasn't long enough.  What a pain!

  Thanks to everyone who took the time to read this!  Sorry to waste time everyone!

• LaserJet Pro 400 M401n: How to set the margins for binding up and left for LaserJet Pro 400 M401n

  I am connected to ePremis (medical site) that allows me to print the selected medical forms. ePremis uses the default printer to print the selected form.  The selected form should be printed on a preprinted form that I load into the tray of the printer.

  The problem is that ePremis does not provide an option to set gutter margins and print aligns correctly with my pre-printed form. The print position is a little weak and must also be shifted a little to the left. I need to reduce the high binding margin to move the position of superior print on the page and the left binding margin must also be reduced to move the print a little position to the left so that the printed data will properly align with my pre-printed form.

  Since ePremis does not offer an option to set the margins of the gutter, I need to be able to set the margins of the gutter through the printer driver, but there is also no option provided by the printer driver dialog box to set the margins of the gutter.  :-(

  Is it possible to set the printer LaserJet Pro 400 gutter margins?  I see the margins left and right options in the driver dialog box printer, but they are grayed out and cannot be changed.

  I have another printer, Kyocera laser printer, and I don't have this problem with the Kyocera because it offers the possibility to set gutter margins in the printer driver dialog.  I wonder why the LaserJet Pro 400 does not provide this option?

  I perhaps could solve this problem by sending PCL6 commands to the printer before printing?  I'm a programmer and am open to this option if it would work.

  Your help would be much appreciated.  Thanks in advance!

  Setting margins generally depends on demand - but (you say) that your application does not allow this.

  Some printers provide functionality of saving images , whereby the position of the image of the page onto a physical sheet can be adjusted to the printer, usually on a basis of by-tray.

  For example, with my Laserjet Pro MFP color 400 M475dn, the appropriate menu/menu item is described as follows:

  

  Note:

  • This setting applies to the bar up this that changed, so will have an impact on all the tasks using the specified status bar.
  • Not all printers support these features - I have no idea if your LaserJet M401 exercises or not.

  With regard to the '... sending the commands to the printer before printing... PCL6«» :

  • PCL6 (PCL XL) rather more autonomous than PCL5is, so I'm pretty sure that nothing you can "send" to the device to influence the outcome of the following printing.
  • Even with PCL5 print jobs, standard printer drivers are "overcome and-tail' with universal output language (UEL) escape sequences (which reset the device to the market environment (user - default)), which would be too mount sequences exhaust specific PCL5 previously sent to the device.

• LaserJet pro 400 mfp wil not install

  I tried setting my new laserjet pro 400 color mfp m475dn, two upward ways described in the installation guide; either via the automatic installation and CD rom. I followed the instructions exactly each 10 times I tried. I even downloaded the software again on the HP site and tried to install that. Each time the same result:

  "Install operation has been too long..." Fatal error etc."after he had reached and hung 99% installed.

  Any ideas guys?

  I am running Windows Vista Ultimate 64-bit.

  See you soon,.

  Neil.

  ndpadgett,

  You have two options:

  1. If you try to install this printer via a USB port, please do a network install and use the driver from hp.com.

  M475 solution print driver full

  2. If you unble to do a network installation, then please look to see if you have a universal print driver installed on your machine. If you do, then you must remove the UPD driver, re-boot and re - install the m475 SW.

• LaserJet Pro 400: Watermark not printing on Laserjet Pro 400 on Windows 8

  On the computer of Windows 8, watermark does not print on Laserjet Pro 400 connected by USB. Please note: the function watermark works on other printers not HP, as our networked Ricoh copiers. The printer prints a watermark on a Windows 7 computer. Using the driver package LJM351_M451_Series-12200-drv_installer.

  Very hard to advise without additional evidence (such as samples).

  With my Windows 8.1 Pro 64-bit system, I can print watermarks on my LaserJet Pro MFP color 400 M475dn (equivalent of MFP M451) device.

  Attached is a zip container file:

  • Small text in the abcde.txt file that contains the text "abcde".
  • Print file abcde.prn contains the print job generated by opening the text file in Notepad and by printing the document (using the driver of HP LJ300-400 color MFP M375-M475 PCL 6 (61.120.5.12262) UPD version 5.3.0.12262), by specifying the "SAMPLE" watermark with the default settings; exit 'captured' by using the option "print to a file.
  • Text file abcde.prn_analysis.txt contains an analysis of the contents of the print queue.
  • PDF file abcde_scan.pdf shows a scan of the printed output by sending the contents of the direct .prn file to the printer port.

  Try to send the contents of the .prn file direct to your printer port; for USB connect, you must use something like:

  copy  /b  abcde.prn  \\computer-name\share
  

  in a Windows command prompt session, where:

  the computer name is the name of the workstation;

  share is a share of the Windows printer instance name.

  The resultant prints show the watermark of the SAMPLE ?

  If so, then the printer handles the commands to the printer (in this case using PCL XL) OK.

  Can generate something similar to your driver for analysis?

  [You will probably need help moderating to attach files in this forum].

• MFP HP LaserJet Pro 400 M425dn cold reset

  Hello!

  Help me! How can I make cold reset HP LaserJet Pro 400 MFP M425dn ?

  You can do 'factory reset' menu of the control panel; or permanent initialization of power first, holding and cover the corner area to the right / left of the control panel when you feed on... release your finger when you see «initialization permanent...» ». After you complete and return the loan, it indicates the reset is complete.

• LaserJet Pro 400 color m451dw: printer Laserjet Pro 400 color m451dw for window 10 drivers

  I can't find the drivers for a m451dw Color Laserjet Pro 400 running on Windows 10.  The only available operating systems are Mac.  Is there another place to look for drivers window other than the drivers regualer section 10?

  10 64-bit Windows

  http://h20564.www2.HP.com/hpsc/SWD/public/readIndex?sp4ts.Oid=5076462 & swLangOid = 8 & swEnvOid = 4192

  10 32-bit Windows

  http://h20564.www2.HP.com/hpsc/SWD/public/readIndex?sp4ts.Oid=5076462 & swLangOid = 8 & swEnvOid = 4191

  ------------------------------------------------------------------
  Say 'Thank you' by clicking the Bravo (Thumbs up) button in the post helped you.
  Please indicate the position that solved your problem as "acceptable Solution".

• laserJet Pro 400 color: printer

  Hello Mr President
  I want a help on your part I have a Color LaserJet Pro 400 m475dw MFP
  and when I turned it on. I show masseage like this {10.1002 electric memory error}
  How can I solve this problem, Mr President

  Hello Sir,

  The error that you expose is a problem with one of the toners.
  The magenta to be precise.
  
  In this case, the recommended action is to replace the magenta toner with an original RESUME.
  
  Kind regards

• Windows RT and HP LaserJet Pro 400 M401w

  I'm trying to connect the HP LaserJet Pro 400 M401w to my Surface tablet running Windows RT.

  I tried to put in the IP, wireless sensor and using the USB cable.

  He is not with the IP or wireless detection.

  With the help of the key USB Cable it things is a CD Rom   If I add a printer and trying to choose manually the printer isn't on the list.  Any help would be appreciated.

  Hi SydsMom, welcome to the Forums of HP. If a product contains the necessary built in the RT drivers, he just needs to be plugged and RT Windows should recognize and install it.
  
  I did a search for "HP LaserJet Pro 400 M401dw Laser printer" with the: Windows Compatibility Centerand it's Windows RT 8.1 compatible.
  
  Microsoft provides these simple instructions: install a printer in Windows 8.1, Windows RT 8.1
  
  In addition, I'm not familiar with that printer, as it is a business model supported. I suggest posting in the trade forums, to get more input. You can do this HERE.
  
  Series HP LaserJet Pro 400 printer M401 Support

• HP LaserJet Pro 400 m401dne: print from Notepad

  Hello! I have a new HP LaserJet Pro 400 m401dne. Everything works fine except when I try to print both sides of a Notepad document copies. As soon as I select the duplex option, the entire document disappears. We had an another HP LaserJet only printed on one side of the paper; who would have something to do with it? Still, I have this printer on the printer list but am selecting a new. I can print any other documents on 2 sides; just don't leave the notebook. Thanks for any help you can give me!

  Thank you, HP! The warranty issue has been resolved and so was the two-sided printing problem. The technician had to install Universal printing and now I can print copies front and back of notebook and everywhere else.  )

• HP LaserJet Pro 400 M401dw: HP ePrint App and Android 2.2

  Hello

  I hope that all is well.

  How can I find and install HP ePrint for Android 2.2? I just found this link https://play.google.com/store/apps/details?id=com.hp.android.print for Android 4.0 and more. For your information, my printer 'HP LaserJet Pro 400 M401 dw' and my smartphone ' HTC Desire, Android 2.2 ".»

  Thanks in advance for your help.

  We wish you the best.

  Mrwan

  Hello @Pooneh,

  Welcome to the Forums of HP's Support. I understand you are trying to install the HP ePrint app on Android 2.2 device. The ePrint application is only available for Android 4.0 versions and later versions. It is not supported for earlier versions of the Android operating system.

  Sorry if this isn't the answer or the solution you're looking for. If you have any other questions, feel free to ask.

• Unable to connect to the HP ePRINT with Color LaserJet Pro 400 M475dw MFP website

  LaserJet Pro 400 color multifunction m475dw-Just installed. Print, scan, copy and fax all works fine! use of WiFi

  Using IMAC OS 10.8.2 with all updates

  Netgear DGN2200v3 router using

  Printer not connect to the HP ePrint website

  Printer connects using Hp and profile for fax set up etc.  But the "HP Web Services" article when enrecorded and hit the Activate button - it does not connect to the site - it seems just to refresh.

  "If I try to connect thro the printer not the imac and try to activate the web services, it says" connection "on the screen BUT after a few minutes of trying - so says" CONNECTION ERROR - the printer is unable to connect to the service. Check the internet connection

  ANY IDEAS - HAVE I MISSED SOMETHING?

  Thank you very much

  I try to pull up the built-in web server (EWS) by entering the IP address of the printer in a browser and set a static IP & DNS address.

  The information for the default gateway, subnet mask and IP address can be accessed from the Setup menu on the front panel, go to settings > reports > network summary and it will print off the coast.

  Once you entered the IP address in a browser and have the EWS pulled up, go to the tab above titled "Networking". Then click on IPv4 in the left column; who will bring to the top of the address configuration page.  Place the manual radio button and fill in the IP address, the default gateway and the subnet mask with the information from the report. You don't fill the part entitled WINS server, which can be left alone.

  You will then want to fill in the DNS of the page part, the favorite should be set to 8.8.8.8 and the alternative/secondary must be set to 8.8.4.4. Then click 'apply '.

  Power cycle the printer. Turn off the power, wait 30 seconds and then turn it back on. Once it is fully operational, try again to connect to web services.

• LaserJet Pro 400 M451dn: Problems copying documents from the printer scanner

  I use a Mark II of Canon Canoscan 9000F scanner to scan documents and copy them into the HP LaserJet Pro 400 451dn color laser printer.  I use the 'Copy' button on the front of the scanner function.  When a color or photo document is scanned this way the red and blue colors are reversed when it comes to the printer off.

  Both the scanner and the printer work perfectly in all other situations.

  Somehow the red and blue colors are to be swapped when a document goes to the scanner to the printer.

  I called the Support Canon technique and they told me that they have never heard of this problem and have never had it reported before.  When you use the "Copy" button function there is no setting that can be done. The scanner copy what he sees.

  So why the red and blue are exchanged on the printer?

  Teknishun

  What happens if you scan the document itself to the computer and then print the scanned copy? If it is ok, then the question must be the scanner software which sends the document to the printer and has nothing to do with the printer. Sorry, but it's a hot issue.

• MFP HP LaserJet Pro 400 M425dn will not print the text to format 72 points or more

  My workplace has recently bought a M425dn of MFP HP LaserJet Pro 400 all-in-one printer. It works perfectly except for the fact that it will not print text that is 72 points or larger in size. I tried many fonts that are installed with Windows, and all them print correctly to the point size 71.5 or smaller; Another thing simply does not appear in prints. Content which is of size to 72 points or more * fact * affect the flow of the content printed on the page, however. It's like the 72 points or larger text takes up space, but it is completely invisible on the printed page.

  I tested using Microsoft Word 2002 on three separate computers, of which two have installed Windows 7 and Windows Vista installed. The problem is the same on all three computers. The printer is connected via an ethernet cable to our wired network. I have installed the printer software included, and I don't think that there are updates for it that have not been installed up to this point.

  Any thoughts on how to solve this problem?

  Hello, I just made an account to solve this problem for you guys because it has been a puzzle to me also...

  I apologize before the huge hand for the terrible grammar and punctuation that I'm in a hurry

  Now it does not work for everyone but I fixed it on my machine with the following

  now before you print it... .use (ctrl + p) in your text editor to open the print window, click (properties), and then navigate to the tab (Advanced) now, I have a section called the characteristics of the printer in this category there is an option to 'send truetype as bitmap' activate this and see if it can help someone of you, for me, with this PERMIT I can print any font size my processor will allow me to type

  in my machine's plug

  Reference Dell d6420

  Win7

  Msoft word 2007

  printer itself is

  HP laserjet 200 color m276

  printer driver is

  HP LaserJet 200 color MFP M276 PCL 6

  I understand that this printer and driver is not identical to yours in itself, but the nature of these drivers makes it highly likely that this solution works for most of you

  If this can help, someone else did post more because I'll probly do not sign in to this site I created this account just for this post and I hope to solve this annoying problem issue for many of you... .no necessary congratulations