HP LJ 1536 dnf MFP: 1536 Fax installation issues

I'm on a land line telephone CentruyLink. The line comes out of the wall in the 1536 and comes out on a phone. Is there another phone connected to this line in my house.

The FAX is set to automatic and two rings. Using the test HP Fax number, the phone rings, I answer, I get the FAX noise, hang up and the FAX is printed.

BUT when I telephone number using my cell phone, it rings, I pick-up and cell phone noise Telec.

This use to work properly, but now I'm having trouble. I spoil the putting in place or is there something wrong with the Fax/printer? Or maybe Qwest did something for the line.

Hey @DanielF,

Thanks for getting back to me on this subject.

When you use a phone line shared with your fax, phone and answering machine you would have normally established for the answering machine takes first.  You want the fax machine must be set to answer 2 rings after the answering machine. With this configuration, you would be able to receive faxes, answer messages and telephone calls on a phone line. When you will be sent a fax that is generally a good rule to have the person who sends the fax call you in advance to give you just a heads-up that the fax will be sent to you. In this way, when the fax is sent you just listen to the answering machine pick it up after 5 or 6 rings. Fax answering tuned and if fax tones are detected the fax answer. If you're not home you will still be able to receive faxes and answering machine messages.

If you prefer this Setup, please follow the steps below to configure you fax.

Step 1: Set the answer Mode:

  1. Click on the button Setup (key) on your printer
  2. Right arrow to Fax Setup and select OK
  3. Select OK in the basic configuration
  4. Right arrow for Answer Mode and select OK
  5. Right arrow for TAM and select OK.

Step 2: Set up the rings before answer:

  1. Click on the button Setup (key) on your printer
  2. Right arrow to Fax Setup and select OK
  3. Select OK in the basic configuration
  4. Right arrow for rings to answer
  5. You will be able to set this to 1 ring to 9 rings. Remember, this must be set to 2 rings higher then your answering machine. If your answering machine picks up suite 5, set the rings to answer on your fax to 7. If your answering machine picks up suite 6, set the rings to answer on your fax to 8. The difference of the 2 ring will allow your printer enough time to 'listen' to the answering machine and raise the fax if fax on the line.

Please also define Mode of fixed STOP error and fax (V29) at Slow speed in accordance with the instructions in my previous post.

Please let me know if the steps I provided work for you. Good luck!

Tags: HP Printers

Similar Questions

  • 1536 dnf mfp does not scan

    I bought my mac (OS X 10.6.8) and my printer 1536 dnf mfp in March 2011. Two well worked until last week, when my scanner stopped scanning. Printer, copier and fax machine still work. The HP software appears to be scan when I press "scan" in that the progress bar is enabled and it appears to 'think' he scanned something, but the images never appear on my screen as scanned. I did nothing recently to my computer or printer I can think of that would make this work stoppage. Help, please!

    Hello again ARGES,

    I have a great Charter which gives step by step instructions touninstall the printer software.

    If you have any other questions, please let me know.

    Thanks again.

  • HP laser jet 1536 dnf mfp, 2 side by side 2 copies

    On 1536 HPLaserJet dnf MFP & MAC w OS10.7.2, how do I copy 2 side Multi Page Doc to 2 side Multi Page copy?

    lrlgll

    I have reviewed this information and am confused.  I also bought this printer for duplex printing. Yes, I can get it to duplex printing - but not for copies and analysis.  I have an older HP printer where I can accomplish this without problem. How do I double-sided for COPY AND SCAN 2 sided to 2 sides?

  • Autofeed of the margins to scan to HP Laserjet 1536 dnf MFP

    Hello

    I have a HP LaserJet 1536 dnf MFP and have problems with the scanner of the automatic feeding system. Papers, I'm trying to make copies to make use of all the 8½ "x 11" "on paper and when they are copied are cut by about ¼" anywhere in the document. " Y at - it an option to make the paper to scan the whole 8½ "x 11" Manger? " Currently, my only solution is to reduce 88% printing, which produces a low police on the copies. Any help would be appreciated.

    Operating system: Windows 7 64-bit

    Thank you

    Invigilium

    I found the solution: buy something else.

  • the installer issues

    Why can't I install cs6? He repeats the installer issues.

    Hi treunltd3

    What is the error you get?

    You can view the document below and see if that helps.

    http://helpx.Adobe.com/x-productkb/global/installation-launch-log-errors-creative.html

  • 1536 dnf laser jet installation issue

    I recently bought a laser jet 1536 dnf for my office.  When I try to install the machine with the driver supplied and downloaded on the website of hp, I can 99 percent, a long wait, and an error message.  I managed to install the machine by using the generic driver of hp Windows 7, but the scan does not work.  Can anyone help?  I found another person with this problem, but it doesn't have a solution either.  Thank you.

    For me, the problem was related to HP Universal print driver installed on the system. (WinXP x 86)

    1 remove the HP Universal print drivers, reboot and run the installation. (not the option I used because I need Uni of HP driver for other printers on the network)

    or

    2. during the installation process when the system detects and installs the printer I noticed that he installed the HP Universal driver.

    At this point, I left 1536dnf install process

    Open Device Manager

    clicked on display and display devices

    printers expanded

    Right click on the HP Universal driver

    clicked on put updated driver

    you click on no, not right now

    Install the printer from the list

    Click on don't search, I will choose driver

    Choose the HP LAserJet M1530 MFP PCL6 driver

    WinXP installed this driver and 1536 HP install process is completed without problems.

    same process should work for Win7 x 86 or x 64

  • HP laser jet m1536 dnf mfp: HP 1536 dnf update failed in wndows 7

    I try to install hp laserjet 1536 dnf in windows 7 64 bit os via usb wired. When I plug the printer during the installation on display printer update failed. I tried with the software of all the features, but who also does not work. If someone have a solution?

    Hi@sulbihar ,

    I understand that you encounter problems installing the printer software. I would really like to be able to help solve this problem.

    Turn on the printer and make sure that the printer is connected directly to a wall outlet. (do not use a hub or a surge protector) This ensures that the printer is full on and can help this situation. The USB cable should not be more then 6 feet.

    I have provided a few steps to try, to see if we can get the printer completely installed on the Windows 7 computer.

    Unplug the USB cable.

    Uninstall the software from the CD: press the Windows key and the E key to access the window from the computer. Make a left click Open in a new window, right click on the printer CD, double click on uninstall.

    Perform a clean boot on the computer and disable the Antivirus software. How to perform a clean boot in Windows.

    Rerun the installation, just after connecting the USB cable, (make sure that the USB cable is connected directly to the computer and not a host or hub station) immediately follow this document.  A fatal error during Installation of the software. After that, the installation should continue.

    If there is anything else I can help you, let me know.

    Good day!
    Thank you.

  • Install disc lost for HP 1536 dnf MFP

    They gave me the MFP to our office for use in the home because it is to small for our office. Problem is that they have lost the installation disc. How can I get it work?

    Here is the link to download the software from HP.com.  Just select your operating system and download your printer software/driver.

    http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?product=3974279&LC=en&cc=us&DLC=en&lang=en&cc=us

  • HP Jet 1536 dnf MFP Lasere: 1536dnf MFP Scanner not installed

    Demand scanner my printer has stopped working about 4 months ago. I use Windows 7 and since then uninstalled the driver printer everything and removed the printer and re downloaded the driver full features. I tried to install the driver several times, but failed every time. I was able to reconnect to the printer, but has never been able to download a driver for the scanner and the application successfully.

    Whenever I tried to install the driver the message shown below to me.

    Hey @babantoad,

    Welcome to the Forums of HP Support!

    I understand that you have some problems with installing the drivers for your printer Laserjet M1536dnf range on your Windows 7 PC. I can help you with that.

    To install the software:

    1. Click Start, in the search bar type "cmd" without the quotes, and open the command prompt.
    2. In this type of window in "msiconfig /Unregister" (without the quotes) and press ENTER.
    3. Type "msiconfig/regserver" (without the quotes) and press ENTER.
    4. Click Start, in the search bar type "msconfig" (without the quotes) and press ENTER.
    5. Click the Services tab.
    6. Click Hide all Microsoft Services.
    7. Click Disable all.
    8. Click the Startup tab.
    9. Click Disable all.
    10. Click Ok and reboot your PC.

    At this point, you should be able to run the Setup program. If you are unable to run the installer, there is a problem with your operating system. Your next options would be:

    Please let me know the results after following the above. If you are able to install the software, click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

  • Problem installing HP 1536 dnf mfp


    Hi kmwcs,

    Welcome to the HP Forums.

    I see that you are getting the error "this system does not have the system requirements" when you try to install the printer software.
    I'll be happy to help you.

    Yes, this printer supports Windows XP.

    Here's a URL providing the system requirements. Notebooks to printers MFP HP LaserJet Pro M1536dnf, M1537dnf, M1538dnf and M1539dnf.

    I have provided a document to check your system to make sure if meets the system requirements.

    Windows XP: "your system does not meet the minimum requirements of the system" Message appears on the computer when you install the HP software.

    Check your version. Netframeworks. How to check what Version of Microsoft .NET Framework is installed in the Windows?

    Run the Windows updates to obtain the most up to date installed.

    What version of IE are you using?

    IE is integrated into Windows and is owned by Windows updates.

    I suspect that you need IE 9 or 10 to install the printer software. I have seen many problems with IE 11.
    I believe that this is because software piggy HP support of Internet Explorer.

    Which version of Adobe Reader do you use?

    Please let me know if you need additional assistance.

    Thanks for posting on the HP Forums.
    Have a great day.

  • HP X476dw MFP: Printer X476dw installation failed

    Just bought a HP X476dw MFP printer. I followed the instructions and put it all. I tried to load the software from the CD, but it just says: "Installation failed."  I am running OS Yosemite. Can someone clarify what the CD says OS 10.6, Lion, Mountain Lion, and the Mavericks but no mention of Yosemite.

    Thank you

    Hello

    You can install the HP software full functionality to get full functionality, it includes additional features such as scanning software HP, receipt of faxes to your computer or scan from the front panel of the printer.

    The latest version of the software can be downloaded from the following link:

    http://h20565.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=5312602&swItemId=ij_125251_6&swEnvOid=4182

    Kind regards

    Shlomi

  • HP LaserJet MFP Pro M127fw Installer has stopped working

    Have difficulty installing drivers HP LaserJet MFP M127fw Pro portable 32-bit hp with windows 7

    Build in software printer stops at Midway

    Downloaded software stops at Midway

    Printer driver standard windows 7 works very well and can print with it, but has no scanner driver

    Doctor scanner HP printer indicates the scan software is not installed and directing me to download driver on the hp website

    installation of this software also stops at Midway

    No errorcodes anywhere, box Installer just message could not continue and try to find a solution. This box diapears as well.

    Installation fails on cable network and usb

    no error messages in the logs of windows

    The http connection works fine

    tried installing with smart installation on and outside (is disabled for the moment)

    Spooler service works well

    We searched this forum more people seem to have this problem but there is no solution mentioned in the end.

    Help, please

    @Gemini02

    Thank you for your help.

    I'm afraid it does not either, I don't use McAfee but Avast.

    Stop Avast, or stop the firewall (windows standard) does not resolve the inability to run the installation software.

    If I unplug the USB cable, the virtual CD in the printer disappears and so cannot run uninstall.

    I didn't want to stop all services, because I don't know what he must stop and don't want other problems that may be difficult for me to correct after a reboot.

    Also, I didn't want to install as administrator, I cannot guess.

    My solution that worked in the end is:

    Connected the USB cable.

    A printer icon appears but with red crosses indicating missing and software scanner fax.

    Right-click on this icon of the USB printer and select software update. the research on the internet.

    Downloaded and installed the correct software without problems.

    I cannot now use the scanner software using the network (wired), but I can live with that.

    The printer works fine on the network. Scanner only via USB.

    Again, thank you for your help.

    This band of turnover can be now closed.

  • MFP: MFP with fax to email/smb

    Looking to buy a Mono Laser multifunction with Fax E-mail/smb feature.

    Anyone know what models are available?

    Hello

    You are right, that the M521 doesn't provide any fax capabilities of the computer.

    For a Mono Laserjet Printer, M426 series would be an option, but it offers no direct and digital fax software interface digital repository, which means that you can install the software and run the digital Fax Setup Wizard to set incoming faxes to a computer, it don't offer digita direct deposit capabilities such as fax eail or a SMB network file :

    http://store.HP.com/us/en/PDP/printers/HP-LaserJet-Pro-MFP-m426fdw-f6w15a-BGJ

    Another option, I can think of is the series HP Pagewide who offer these features, but these are companies scheduled inkjet printer not monochrome color so that perhaps will not be an option for you...

    There they offer direct fax, e-mail or smb shared folder, archiving, but it uses 4 cartridges:

    http://store.HP.com/us/en/PDP/printers/HP-pagewide-Pro-477dn-multifunction-printer-d3q19a-B1H

    Hope that these options meet your needs,

  • HP 3530 MFP and Fax module


    The fax module will slip in a location near the opening of the port of fax.  It should be kind of a plug and play to a simple installation.  The most difficult part opens the chassis in order to expose the slot.

    If you are looking for instructions on how to open this printer you will need access to a service manual.  Service manuals are reserved for the HP certified technicians repair, so we cannot directly link on this forum.  However, if search you around them they are usually are circulating on the internet and available.

  • Color LaserJet MFP M177fw Pro: installation of web services blocked to 'connection '.

    I'm trying to enable Web Services on this new LaserJet.  I am in the built-in Web Server page and the configuration of Web Services tab.  I clicked on 'Turn on' and it just keeps spinning in connection...

    DNS is 8888 and 8844

    All the other tabs work; It is connected to the computer and the Internet.  Help please?

    Thank you!

    Hi @crowndude,

    I see that you have problems with Web Services. I want to help you.

    I have provided a few steps to try to see if we can solve this problem.

    Turn off IPv6 on the printer.

    Go to configuration, network configuration, network, IPv6 Services and turn it off.

    This DNS works better for Laserjet printers. Please change the settings to see if this will help the printer built-in Web server.

    Preferred DNS address: 209.244.0.3
    Auxiliary DNS address: 209.244.0.4

    Power cycle the printer.

    If you still have questions, please continue with the following steps:

    Update the firmware of the printer by a USB connection. HP Color LaserJet Pro MFP Firmware update M177fw.

    Configure a static IP address for the printer. Proceed to Solution 3: printer of the assign a static IP address.

    Printer HP Color LaserJet Pro MFP M177fw and HP LaserJet Pro MFP M127fw and M128fw printers - printer does not keep the Wi - Fi connection.

    I'll send you another step to try in a private message.
    In the forum next to your handle name simply click on the envelope to see.

    If you appreciate my efforts, please click on the "Thumbs up" button below.

    If there is anything else I can help you, let me know. Thank you.

Maybe you are looking for