HP Mini-250 2000: Windows 7 startup problem

Similar Questions

• Windows Vista startup problems

  Hi all

  I use an old laptop Dell Studio with Vista and I have problems trying to start. My suspicion is a questionable download has screwed the hard drive or I'm missing some drivers.

  What is happening, it is start the computer to the windows startup page and that's all. This shows only the loading bar going around constantly. When I try to start safe mode, it arrives at crcdisk.sys file and stops. The diagnostic test gives a pass for everything except the hard disk, to whom he gives the error code 2000-0146.

  Anyone has any suggestions on what to try next? If I can find the CD I'll try a system reset but was hoping to save the files that I have on my hard drive. Or reinstall the drivers would be worth?

  Thanks in advance :)

  Josh

  Hi all

  I use an old laptop Dell Studio with Vista and I have problems trying to start. My suspicion is a questionable download has screwed the hard drive or I'm missing some drivers.

  What is happening, it is start the computer to the windows startup page and that's all. This shows only the loading bar going around constantly. When I try to start safe mode, it arrives at crcdisk.sys file and stops. The diagnostic test gives a pass for everything except the hard disk, to whom he gives the error 2000-0146 code.

  Anyone has any suggestions on what to try next? If I can find the CD I'll try a system reset but was hoping to save the files that I have on my hard drive. Or reinstall the drivers would be worth?

  Thanks in advance :)

  Josh

  Hello

  A download will not destroy the hard drive, while the age will be.

  That the error code 2000-0146. When you use the Dell diagnostics indicates a hard failure/failed.

  http://en.community.Dell.com/support-forums/disk-drives/f/3534/t/19457874

  http://en.community.Dell.com/support-forums/laptop/f/3518/t/19484648

  Replace the hard drive.

  See you soon.

• 2000-2106TU HP: startup problem

  Hello

  When I turn on my laptop, my laptop takes longer than usual to enter the word of welcome. The symbol for windows is here for a long time that flashes for three or four times and then sinks into the welcome note. What is the solution for this?

  Spoiler (Highlight to read)

  

  

  Dear customer,

  Welcome and thanks for posting your question on the Forum from HP Support.

  According to the displayed number, I understand that your unit takes a long time to reach the office.

  I'll be more than happy to help you in this case.

  Many programs will begin works invisibly in the background when you turn on your computer, slow system startup time and that can cause crashes and software conflicts.

  So what led to the slow start-up, however you can easily disable these programs you don't need to start immediately:

  STEP 1:

  (a). Click Start, type "msconfig" in the search bar and press ENTER. In the System Configuration window, click the Startup tab.

  (b) in the list of programs that appears, uncheck the box next to those that you don't need to run automatically at startup.

  (c) only uncheck programs that you use regularly or to know that you don't need.

  As a general rule, it is best to not touch anything related to your brand of computer, HP, Intel, AMD and Microsoft.

  STEP 2:

  You can also download this software on your device.

  More Suggestions to keep your PC in good health:

  Defragment your hard a drive in a month:

  To defragment your hard drive click on this link

  Clean your hard drive once in 15 days:

  To clean your hard drive, click this link

  Remove temporary files in the PC.

  NOTE: Restart especially your PC regularly and check for viruses and spyware

  Hope this helps, for other queries in response to the post and feel free to join us again

  * Click on the white button on the right to say thank you Thumbs Up *.
  Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

  Thank you
  VSL85
  Although I am an employee of HP, I speak for myself and not for HP

• Error: "Windows cannot start because of a configuration of the disk of the computer problem" in computer Dell Dimension 2400 Windows XP startup problem.

  Original title: problem starting on a Dell Dimension 2400 - how to set up the drive with a keyboard.

  I have a Dell Dimension 2400 with Windows XP, start, he can't go to the home screen, so I can't use the suggestions to start right click.

  The error message indicates "Windows did not start because of a configuration of the disk of the computer problem".
  "Cannot read disc startup selected." check material stand of disk and the path.
  How to set up or fix this problem with a keyboard

  Hi MarieButler64,

  You did it of any material changes or software on the computer before this problem?

  You can follow this link & check if the problem persists:

  Error message: "Windows did not start because of a configuration of the disk of the computer problem.

  Hope the helps of information.

• Windows XP startup problem

  OK, my problem is that I start windows xp and it will very well the panasonic screen and past the logo screen to windows xp with mobile points. but after that it's as my processor is to expire or rather the light shines faintly and it just sits there. But if I leave it alone for about 15 minutes itll displays the login screen. I tried to connect and itll just stay there and freeze, and never cross the parameters of loading. ive tried to remove the drivers which are not signed for windows xp (same as Tho they have never had a problem before) ive also completely reformatted my computer. I don't know if it has nothing to do with it but ive recently partioned the other half of my hard drive that the processor recognizes (only let me use 150gigs on 350). also this issue initially started after I had to completely shut down my computer because it froze during a flash image, I was running gamebooster including some of the process essentials that run and monopolize the ram stops. but its never happened before. don't think it's important because I have completely reformatted my computer. and also im on the computer it works perfectly fine in safe mode

  Heres my dead basic care.

  model: Panasonic Toughbook CF48u

  OS: Windows XP Pro SP3

  Processor: intel pentium 3-m 1.4 GHz

  256megs of ram

  I actually found the problem was that the battery was dead (still original battery) and he was trying to get the energy out of it at startup or since he was dead could not put the cpu

• Windows 7 startup problem

  Hello.

  I have an SSD and a HARD drive. The SSD I have Windows 10 and on HARD drive I have Windows 7. I have to go to my part UEFI BIOS of motherboard DUAL GIGABYTE to choose what memory I want to boot from. I have recently installed windows 10 and he has no problems so far. When I want to start my windows 7, a blue screen appears and disappears quickly. I run the Startup Repair tool, but nothing happened after a long time if I booted windows 10. In windows 10, it says my basket on the G drive (partition win 7) is corrupted, you want to empty the Recycle Bin for this drive? YES NO?

  What should I do? I have lots of important information on my HARD drive and win 7 partition.

  Thank you and sorry for my English.

  http://www.SevenForums.com/tutorials/219533-troubleshooting-Windows-7-failure-boot.html

  Yes you really should change the way in which you the dual boot

  I use one of these devices

  http://www.Amazon.com/GP/product/B00CDSVXTY/ref=oh_aui_detailpage_o01_s00?ie=UTF8&PSC=1

  A location for the operating system and a location for the data for this os.

  Then simply change the disks out for another operating system of 10-7-Linux

  Makes life so much easier :)

• Satellite A660 - Windows 7 startup problem

  Hi, I have I think the biggest problem I have ever had. I have the Toshiba Satellite A660. I have Windows 7 ultimate 64-bit (just to know.) Computer laptop freezed so I pressed to shutdown (stop) to close.

  Then I tried to start it but I saw only "starting Windows" for more than an hour... When I tried to use the repair disk I saw the Green loading bar only (such as loading windows XP) but nothing happened again. So I tried to use the installation disc, but I get a "windows start" and nothing happened, even with a USB tip.

  Could someone help me?
  Thanks for all the posts.

  I understand that your computer was working and running W7 64 bit.
  You can or you looked in the BIOS? I don't know what you can view/change but is the HDD displayed and if memory is reported?
  If you use the drive of W7 or reinstall to start the computer drive can you get to the screen install Windows and select "repair your computer". If you do not see this screen, you will need to make sure that the DVD or USB is the first boot device.

  Return to this stage for more ideas or google for something like "windows command prompt repair 7.

• G72-B60US: how to fix the Windows 7 startup problem if HP has never provided a disk to reinstall Windows?

  Recently, my HP G72-B60US, is unable to boot. The window manager start Windows displays "unable to start Windows. To solve the problem:

  1. Insert your Windows installation disc, and then restart your computer

  2. choose your language settings, and then click "next".

  3. click on "Repair your computer."

  If you do not have this disk, contact the manufacturer or computer of your system administor.

  File: \Boot\BCD

  Status: 8xc000000f

  Info: an error occurred trying to read data from the boot record. »

  Because the laoptop was out of warranty and the computer is unable to boot, I'm unable to create a recovery disk. I have two questions.

  1. is it possible to download a free relocation to the Windows 7 home page to start my computer?

  2. When do reinstalling the operating system, I have to wipe back all in this situation? If not, how to reset the operating system without wipping on all data?

  Thank you for your response.

  I solved the problem using the F11 key. The correct procedure for the relocation of the OP suggests, first try the F11 key. Moreover, the Dell PC Restore appears F8 key. The user should remember the key to the recovery of the PC.

• Windows Vista startup problem

  Signature of the problem:

  Problem event name: BlueScreen

  OS version: 6.0.6001.2.1.0.768.2

  Locale ID: 16393

  More information about the problem:

  BCCode: 1000007e

  BCP1: C0000005

  BCP2: 873BF38A

  BCP3: 8D5E56BC

  BCP4: 8D5E53B8

  OS version: 6_0_6001

  Service Pack: 1_0

  Product: 768_1

  Bug Check 0x7E: SYSTEM_THREAD_EXCEPTION_NOT_HANDLED

  This bug check indicates that a system thread threw an exception that the error handler did not.

  http://msdn.Microsoft.com/en-us/library/ff559239%28VS.85%29.aspx

  0xc0000005: STATUS_ACCESS_VIOLATION indicates a memory access violation has occurred.

  It is also useful to take a look in landfills.

  Please, start Windows Explorer and navigate to the C:\Windows\Minidump folder. Then, copy the files to your desktop, zip dmp dmp all in 1 zip file and download the zipfile to your Skydrive [1] and post a link here, so that I can watch the discharges with the debugger and to see the cause of the accident.

  André

  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02db-4665-993a-08d865088d65 [1]

  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• Windows 7 startup problems (I should go to Windows 10)

  The title says it all.  I had difficulties from Windows 7, and I was wondering if it would solve the problem to him complete the installation of the new Windows 10.  The message I get when now is one where it is said that the recommendation is to check or repair drive C or start normally.  So far I could treat the computer along and start normally, but I fear that time is limited with this tactic.  I tried to allow the computer to do the analysis and automatic repair, but to no avail.

  I hope that the installation of Windows 10 will be the solution, but fear it can only complicate the already ongoing issue.

  Thanks in advance,

  RTC

  Could be a sign that the hard drive has failed.

  Upgrading or migrating to Windows 10 won't make a difference if this is the case.

  See the following wiki Article by ZigZag3143 (Windows devices & for IT Pro MS - MVP)

  HD check how to test your

• URGENT HELP PLEASE! Windows did an automatic update finished & gave me the Option "restart now or later. I chose Now.A screen from Windows is going down, a startup problem occurred immediately after the installation of updates, this has happened about 9 h

  Windows has finished just do the automatic updates on my Sony Vaio... He said that he should be released on... When it restarted it goes to the ' start windows normally, safe mode, safe mode w/network, safe w/command prompt mode and the last known good configuration "screen... I tried "start windows normally", and last known good configuration, and no matter what I did, it looks like its about to begin, with the 'windows' logo & he says it's the boot process, but then instantly a screen flashes, but too fast for me to read what he says, so I immediately finished fashion splash screen choose again. Whenever I try to get my PC to boot it goes through this again. Exactly... I tried restarting, shutdown PC up to 30 min. waiting & more & again it does the same thing & will NOT start! HELP PLEASE!
  I do not have my current work & News & saved downloads & need help & I timed commitments to people... ASAP PLEASE!
  Thanking you in advance...

  Windows XP logon screen does not appear and the computer continuously restarts
  http://support.Microsoft.com/kb/310396

  Resources to solve startup problems in Windows XP
  http://support.Microsoft.com/kb/308041 TaurArian [MVP] 2005-2010 - Update Services

• laptop 2000: cannot complete startup on HP 2000 Windows 8

  I have a HP 2000 Windows 8 (not sure if 32 or 64 bit). Some time ago I met a problem starting, which seems to be similar to that published on 21/08/2014 amount «I have a hp2000-2b19wm...» ». The system starts until it happens to my home screen, then it is totally insensitive. He feels that there are a lot of things running in the backgorund such that the reader is completely tied up. I have a lower right corner of the message that updates are available, which I can believe since it has been a few months since I've updated.

  I tried on my own to do but F8 safe mode start-up assistance which was ineffective; just keep doing a regular full boot. I read the solution regarding the start-up of Windows 8 Mode without failure given in the above referenced post. However, the link does not take me to a document, just to the HP support page general.

  Use F8 the right way to enter into the Mode without boot failure, or it's not like I have an another question?

  Thank you.

  @jsfrisbie,

  The ID of the fault: 6BX09G-6BA84A-MFGK0K-60RU03 is a hard drive error.

  You can replace the hard drive yourself.  Here is Guide to Service and Maintenance page 47.

  If it isn't of course can do it yourself, please use the following http://www.hp.com/contacthp and create a folder for your question and contact HP. If you do not live in the United States / Canada, please click on the link below to get contact information for your region.
  http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

• For Windows vista: Startup Repair couln t repair problem

  I am trying to repair a laptop from a friend, but I'm new to this kind of thing and it's a problem starting. I don't think I have a hardware problem because I have the video but I can't load the operating system and I ranstartup repair, but he could not fix the problem. I received this message:

  Startup Repair cannot repair this computer automatically

  Signature of the problem:
  Problem event name: StartupRepairV2
  Signature of the problem 01: Auto failover
  "' 02: 6.0.6000.16386.6.0.6001.18000
  ""03: 6.
  ««04: 262148»»
  «' 05: Badpatch»»
  "" 06: Badpatch.
  ""07: 0"
  "" 08: 3
  «' 09: WrpRepair»»
  ""10: 0.

  The problem started when my friend has installed updates, unfortunately I do not know what they are, and she said that she did not bring any modification other than recently. If you need more info I can try to help, but I'm kinda at a loss of what to do something without possible srewing up.

  What is the startup problem?  Are there any error messages, and if so what is the EXACT text (including all codes)?  Which version of Vista is?

  Do you know when this problem started?  Try a system restore to a point in time BEFORE the problem started.  Here is the procedure: http://www.howtogeek.com/howto/windows-vista/using-windows-vista-system-restore/.  Don't forget to check the box to show more than 5 days of restore points.  If the first attempt fails, then try an earlier point or two.  NOTE: You will need to re - install any software and updates that you have installed between now and the restore point, but you can use Windows Update for updates.

  If this does not work, try to start in safe mode (repeatedly hit F8 key so that the start and go in safe mode with networking).  Then we will check some of your system files:

  Go to start / all programs / accessories / command prompt and right click on command prompt, and then click Run as administrator.

  Type sfc/scannow, go and let it run.  It will scan and try to correct some of your system files.  If all goes well he comes complete with no corruption, it could not repair (if it has these post of corruption here or try to analyze it to find the problem or files using http://support.microsoft.com/kb/928228.

  While in the command prompt, type chkdsk /f /r and enter and let it run.  It will scan and try to solve any corruption or bad sectors on your hard drive and remove especially as a cause.

  If it does not, then thanks for posting any repetitive error message in Event Viewer on startup (Start / Control Panel / administrative tools / Event Viewer).  Here's how to use Event Viewer: http://www.bleepingcomputer.com/forums/topic40108.html.

  If this does not work, you will need to do a repair/system upgrade using the Windows Vista Installation disc authentic (you own or that you can borrow from someone).  Here is the procedure: http://www.vistax64.com/tutorials/88236-repair-install-vista.html.  Although this will not affect your data, settings or programs, you should always back up your data before you start just be on the safe side. If other procedures do not work, it is almost certain to work.  You can have a lot of updates to re - install (including all you need to remove service packs).  If the version on system with SP1 or SP2 preinstalled cane and the disc is an earlier version, then you will need to do a slipstream drive as follows: http://www.vistax64.com/tutorials/151606-vista-sp1-slipstream-installation-dvd.html.

  I hope one of these procedures can solve your problem.  If this isn't the case, after return and we will try something else.  Return message anyway so we know how it turns out.

  Good luck!

  Lorien - a - MCSE/MCSA/network + / A +.

• Microsoft Word 2000, Excel 2000, Windows Mail applications, IE 9 frequently stop working.

  Original title: Microsoft applications often stop working.

  Hello

  My OS is Vista professional family.   Microsoft applications are Word 2000, Excel 2000, Windows Mail, IE v.9.01.11. The Applications Windows Explorer crash frequently, with the word several times a day, if not an hour.  Generally application stops working, and options include "close the program and search the Internet for solutions.   By clicking on this option quickly translates the application startup program details are generally a message followed by message DEP BEX or an APPCrash.    I can't identify any recent addition or the deletion of all program. Following is a sample of the problem signatures posted after applications have crashed.   They were copied from a Word doc, in which they have been copied and pasted display Details appearing on screen after a crash of the application. I hope that they will result in something to someone in the community, who will explain to explain my problems and possibly to propose possible solutions.

  A recent accident of Word displays the details of the following product

  Signature of the problem:

  Problem event name: APPCRASH

  Application name: WINWORD. EXE

  Application version: 12.0.6661.5000

  Application timestamp: 4f7cd9da

  Fault Module name: gdiplus.dll_unloaded

  Fault Module Version: 0.0.0.0

  Timestamp of Module error: 4f2bf90a

  Exception code: c0000005

  Exception offset: 739b74b2

  The system version: 6.0.6002.2.2.0.768.3

  Locale ID: 2057

  More information about the problem:

  LCID:                                    1033

  Brand: Office12Crash

  .skulcid: 1033

  A crash of Windows Mail message BEX

  Signature of the problem:

    Problem event name: BEX

  Application name: WinMail.exe

  Application version: 6.0.6001.18000

  Application timestamp: 47918ed8

  Fault Module name: gdiplus.dll_unloaded

  Fault Module Version: 0.0.0.0

  Timestamp of Module error: 4f2bf90a

  Exception offset: 734f74b2

  Exception code: c0000005

  Exception data: 00000008

  The system version: 6.0.6002.2.2.0.768.3

  Locale ID: 2057

  Additional information 1: fd00

  More information 2: ea6f5fe8924aaa756324d57f87834160

  Additional information 3: fd00

  Additional information 4: ea6f5fe8924aaa756324d57f8783416

  Another accident of Windows Mail message APPCRASH

  Windows Explorer also indicated an APPCRASH

  Signature of the problem:

  Problem event name: APPCRASH

  Application name: iexplore.exe

  Application version: 9.0.8112.16455

  Application timestamp: 507284ba

  Fault Module name: StackHash_efe9

  Fault Module Version: 6.0.6002.18541

  Timestamp of Module error: 4ec3e3d5

  Exception code: c0000374

  Exception offset: 000b06b7

  The system version: 6.0.6002.2.2.0.768.3

  Locale ID: 2057

  Additional information 1: efe9

  More information 2: e7344786bdd2b67bba3a148841d9ab99

  3 more information: 7eb2

  Additional information 4: 8c1001f20b0a9ea4ef73b89ec642f751

  A message from Excel to crash was also an APPCRASH one:

  Signature of the problem:

  Problem event name: APPCRASH

  Name of the application: EXCEL. EXE

  Application version: 12.0.6661.5000

  Application timestamp: 4f7cda6d

  Fault Module name: gdiplus.dll_unloaded

  Fault Module Version: 0.0.0.0

  Timestamp of Module error: 4f2bf90a

  Exception code: c0000005

  Exception offset: 739b74b2

  The system version: 6.0.6002.2.2.0.768.3

  Locale ID: 2057

  More information about the problem:

  LCID:                                                     1033

  Brand: Office12Crash

  skulcid:                                                 1033

  Yell.com has ceased to function and display a signature of the AppHang problem

  Description:

  A problem caused this program blocking interact with Windows.

  Signature of the problem:

  Problem event name: AppHangB1

  Application name: iexplore.exe

  Application version: 9.0.8112.16450

  Application timestamp: 503723f6

  Hang Signature: 1SS3

  Hanging Type: 131072

  The system version: 6.0.6002.2.2.0.768.3

  Locale ID: 2057

  Signing of additional blocking 1: 0e0f29b77e2ee0db48c78120c426a95f

  Signing of additional blocking 2: a50c

  Signing of additional blocking 3: 0e81b6d23e21de2e5d278567f0fad5ea

  Signing of additional blocking 4: 1SS3

  Signing of additional blocking 5: 0e0f29b77e2ee0db48c78120c426a95f

  Signing of additional blocking 6: a50c

  Signing of additional blocking 7: 0e81b6d23e21de2e5d278567f0fad5ea

  Thank you very much

  Birkbeck

  Hi Birkeck,

  I imagine the inconvenience that you are experiencing. I will certainly help the question of fixing.

  To help you suggest several steps to solve the problem, I would appreciate if you could answer the following questions:

  . You receive an error code or message?

  Please follow the methods and mark the question below:

  Method 1:

  You need to perform a clean boot to prevent any third party conflicting application from interfering with your computer.

  To put the computer in a clean boot state, you must follow the steps in the article mentioned below and check with the question.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: You must follow step 3 of the article mentioned above to recover your computer to a Normal startup after you complete all the steps.

  Method 2:

  I suggest you to run the patch from the link below.

  Applications may crash in Windows Vista, in Windows 7, Windows Server 2008 or Windows Server 2008 R2:

  http://support.Microsoft.com/kb/2541119

  Method 3:

  For issues with Internet Explorer, please follow the steps in the link below.

  What to do if Internet Explorer stops responding:

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-to-do-if-Internet-Explorer-stops-responding

  Tips for solving problems when Internet Explorer hangs or stops working: http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-Internet-Explorer

  Note: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Method 4:

  Scan your computer by using the Microsoft Safety Scanner by clicking Download now to check if there is no virus infected:

  http://www.microsoftsafetyscanner.com/

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  I hope that the information above helps you.

• Simple Technologies Signature Mini 250 GB external hard drive espresso does not

  Original title: Simple Technologies Signature Mini 250 gb External Hard Drive espresso

  has anyone found a driver or a "Supplemental Software" to make this product work with Windows 7?

  Hi lacrawford,

  Thank you for writing to Microsoft Communities. The problem description, I understand that you are not able to access the external hard drive. Before you start the troubleshooting steps, I need the required information:

  ·         He has already worked?

  ·         What happens when you try to access the external hard drive?

  ·         You get the error message?

  ·         The question is limited to this device?

  Follow these methods.

  Method 1: Run the tool and troubleshooting hardware devices.

  Method 2: Try using the device on another USB port and check.

  Method 3: Try using the device on another computer and check if the problem persists.

  Method 4: Uninstall and reinstall all USB controllers, follow these steps:

  (a) click Start, type Device Manager in the start search box and press enter.

  (b) expand Bus USB controllers.

  (c) right click on each device under the Bus USB controllers node and then click Uninstall to remove them one at a time.

  (d) restart the computer and reinstall the USB controllers.

  (e) connect the removable USB storage device and perform a test to ensure that the problem is solved.

  For reference:

  Tips for solving problems of USB devices (Applicable to Windows 7)

  For the latest drivers/software, you should contact the manufacturer for more help and information.

  If please follow the methods and let us know if you need more assistance. We will be happy to help you.

  Thank you.