HP Officejet 2622: Officejet 2622 weakest paper

Paper not feed the printer correctly, causing it to jam. It seems to pull down more on the right side, but then stops. When I remove the paper that it is always wrinkled in the hand left corner 2-3cm.

I followed all the steps the video on paper jamming in the 2622 Officejet and cannot find any torn paper or debris causing a problem. The paper is new and in good condition! The printer is less than 1 year.

I would be grateful for any advice!

Hi @Treesajane,

I read your post and see that the paper is not feeding properly and is the cause of paper jams. I'd love to help you.

I was not sure which video that you saw previously and what steps you have taken, so I've provided a document for issues with the paper feed. Make sure that you clean the paper feed rollers, it can solve this problem.

A 'Paper jam' error on the device HP Officejet 2620 all-in-One and Deskjet Ink Advantage 2640 all-in-One Printer Series.

If the problem persists, please call our technical support at the 800-474-6836 and inqurie on a replacement printer. If you do not live in the United States / Canada region, please click the link below to get help from your region number.
http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

If you appreciate my efforts, please click on the "Thumbs up" button below. Thank you.

Tags: HP Printers

Similar Questions

  • HP Officejet Pro - second paper tray 8600

    My Officejet Pro 8500 Premium printer no longer works. Bought a new printer Officejet Pro 8600, the basic version. Is it possible to reuse the 8500 second tray paper on my new printer?

    I can't say with certainty, but a couple of data points suggest 'no ':

    • The part number for the 8600 Officejet and Officejet 8500 extra paper tray are different.  The Officejet 8600 extra paper tray is the CN548A, the 8500 is CM759A.
    • I have a 8600 Officejet with the additional target bonus and an Officejet 8500 has without the tray extray.  I tried to put the tray on the 8500 a 8600 and it didn't fit.
  • OfficeJet Pro 8610: Paper feeding problems

    Is it possible to manually feed a single sheet of paper in the 8610?  I have sheets simple manual power in my old Lazerjet 4Plus and find it convenient if I use 'good side paper '. (reuse, recycling)

    @Arnot41

    Welcome to the Community Forum of HP.

    I don't think you can "unique paper source" in this printer.

    Part of the problem could be the way the printer picks up the paper - the mechanism (rollers, power, sensors) - must be "so" or something can glitch and you might get an error any.

    Assuming that the paper is the same quality paper that could be used in the printer in any case, it is standard 20 # bnd, white paper, or another high-quality brand HP or equivalent, then the following should work:

    You might be able to 'good use' book on top of new paper in the tray from the stack and use it that way.  If the printer not to panic because of the paper with something printed on the back of the paper, it should work.

    Stack the paper into the tray with the clean side to print "hidden face".   This means that the 'already printed side' will be visible when the paper is in the tray.

    You can try it certainly - if the printer doesn't like it, it will tell you on this subject.

    The 8630 Pro OfficeJet print on paper one side "already used" - I just tested.

    When you see a post that will help you,

    Who inspires you, gives a cool idea,

    Or you learn something new.

    Click the 'Thumbs Up' on this post.

    My answer-click accept as Solution to help others to find Solutions and answers!

  • OfficeJet 7612: Custom paper selection OfficeJet 7612 size?

    I implemented a custom size (11.5 x 10.0) in Windows 7. Suite insttruction of this site on the definition of this size, I am responsible to go in displays preferences-paper/quality-advanced and set the size here in a drop size. However, the 7612 preferences-paper/quality-advanced doesn't have a paper size option in the Advanced window. My custom size does not appear in the list of paper sizes in paper/quality window. How to choose a size for a 7612 custome?

    Hello

    The HP Officejet 7612 does not support a custom paper size.

    As cosument explains, some HP printers to print on paper of custom in Windows format. Go to create custom in Windows 8, Windows 7, Mac OS X paper sizes learn more.

    For the specific model, a custom size printing is not supported under Windows you will find listed on his record in the specification of paper output section:

    http://support.HP.com/us-en/document/c03618348

    Kind regards

    Shlomi

  • HP Officejett Pro 8600: paper jam

    I have a paper jam and I cannot fix it after viewing the video of HP.  The paper is visible from the front and after removal of the duplexer.  The book seems to be tightly wound around the roller.  I can't go out fron the front and it's wrapper around the roll, when I look at the back.  Any suggestions?

    Dottie

    Hey @Dottie11,

    I see that you have some problems with a paper jam in your 8600 e-all-in-one printer Officejet. I can help you with that, but it is not a lot that can be done in this situation.

    If the printer is still under warranty, I suggest to contact the HP Support by clicking on this link and fill out the form below.

    If the printer is out of warranty, the best I can do is suggest more strength or cutting paper with scissors. Those who are not HP recommended troubleshooting steps and HP can not guaranteed that they will help with the jam, but it's the best I can do.

    Please let me know the results after following the above. If you clear the jam or come up with a solution, please click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

  • HP Officejet Pro 8600: paper feeding problems

    Help!   My printer has all of a sudden decides to try to feed a bunch of paper at the same time, ruining the leaves.  May 6-12 pages.

    I don't know the terminology to search for this problem.  There are times when paper changes (for example the new color), but not always.  Hate waste, hate to lose the County. Should I clean something?

    Welcome to the HP community @macandsons!

    I came across your message on several pages of food through your Officejet 8600 and wanted to pop in to help. I would like to see you link below and try the steps in the order for that matter. Generally a good cleaning roll will help this type of concern. If you still find the printer pull in several sheets of paper, then I recommend finally call phone support to talk of a replacement printer.

    More than one Page at a time feeds through the printer

    If you have trouble, let me know and I'll do my best to help.

    Hit the "accept as Solution" if we reached a solution and the "thumbs up" to say thank you for my help.

    Have a nice day

    HP technical support are available by clicking on the following link:

    http://h22207.www2.HP.com/us-en/?openCLC=true

    (1) once the page opens, please select the country in which you are located. Then enter your model of HP on the right number.

    (2) then choose "Contact the Support" tab at the top and scroll to the bottom of the page "HP Support - contact" to fill out the form with your details.

    (3) Once finished, click the "Show Options" at the bottom right.

    (4) Finally, scroll to the bottom of the page and select "Get a phone number." A file number and telephone number will now fill for you.

  • OfficeJet 7110: unlisted paper size

    To print from photoshop to a super A3 format, 13 of 19 "

    But this paper size is not listed. I don't see anything larger than A4.

    How can I handle this?

    Evening @ppoint.

    I hope that I can offer you assistance with print on 13 of 19 "paper with your Officejet 7110 large Format printer.

    I noticed that you have upgraded to Windows 10, some features may be missing from the initial installation.  You can try to uninstall the printer software. Then download the most recent driver available;  HP Officejet 7110 series full feature software and drivers - Make sure to get full functionality, not only the base driver.

    Did you that your computer has all its windows updates?  How can I tell if my computer is up to date?

    Restart the computer, and then try your print again. If the page size is always missing you can try to create custom paper sizes (use as a rough guide for directions.)

    Please NOTE: With all models, print custom page sizes are n ot guaranteed from Windows, it usually ends up being a limitation of the operating system presets. All these settings are error.

    Please let me know if any of these steps has resolved your problem, or if there is anything else I can do to help.

    I look forward to hear from you!

    Thank you

  • You are looking for 8600 OfficeJet pro replacement paper trays

    Where can I buy replacement bins to printer OfficeJet 8600 Pro Plus paper?

    I'm looking NOT for the paper to Add on tray, but a replacement for the main tray. Mix us different types of paper and envelopes in and out of the state bar throughout the day, and instead, we would like to keep several loaded additional bins of specialized paper to reduce the wear on the main plate.

    Suggestiosn?

    Thank you!

    I searched in the online stores available through HP and was unable to find this part.  However, I could see the part is available through the HP Technical Support by calling in.

    Click here to access the complete list of HP Technical Support phone numbers.

    The reference is more CM749-60036 for Assembly of the main tray for the Officejet Pro 8600.  This part is currently around $25 usd, but the prices are subject to change.

    I hope this helps.

  • HP Officejet 6500 n710z: paper feed not working

    My printer suddenly stopped picking up the paper from the tray.  I cleaned the rollers, but the only way he'll be looking for if I force a sheet at the back of the printer.  I get error #0x61011bef, but it gives me no help.

    Welcome to the @lferradino forums

    I saw your post on the problems you are having with your Officejet 6500 a, as it is no longer pick up the papers and now telling you an error code. I wanted to share some information with you to see if it can help you!

    The error code you are seeing is normally a failure of printer error and with regard to the printer does not pick up the paper, please try the steps in the guide below.

    A Message appears "Out of paper" for HP Officejet 6500 a e-all-in-One Printer Series "

    If the error or paper pick problem persists, please call us directly to discuss your options of the printer, as you will most likely need another unit.

    Please contact our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number. http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

    Best wishes & happy Wednesday

  • HP Officejet Pro 8500: Paper feeding problems

    Why my printer HP Officejet Pro 8500 has constant pain to pick up the first sheet of paper, when the 'Print' is selected.  He invariably through a blank sheet and then gives the message "on paper" when the paper is in the tray.  It's same with envelopes.  Frustrating!

    The troubleshooting in the here document steps can help solve problems loading the paper in the printer Officejet 8500.  Please go through all the steps in order.

  • HP Officejet pro l7680 - paper jam error

    original title: HP Officejet pro l7680

    Guard gives me paper jam error. I removed all stuffed with material, redefinition and still not stop send MSG does anyone have any suggestions? Says the error is in the area of the print cartridge. Nothing there.

    Hello

    ·          The printer works much earlier?

    ·          What have the changes to the computer or the printer settings until the problem occurred?

    You can see the link given below to resolve the problem.

    http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

    Hope that information was useful

  • All-in-one HP Officejet 6500 has: paper size or the type of error message problem

    I have a HP Officejet 6500 all-in-one a and am running Win 7 on a desktop computer.
    I get a paper mismatch (type and paper size is incorrect) error message.
    The printer is not connected to the internet, but it is connected by a USB cable to the computer.
    I look at the instructions to make an internet connection and they were just too complicated. So I download the update of the firmware and ran to the computer. He would not go beyond the area of printer selection where no printers were found. Clicking Refresh has not helped.
    This update of the firmware seems to have solved the problem for some users, but I need to know how you install it.
    Thanks for your help.

    17/03/2015 #2

    I think I solved the problem. I went to the website to download drivers, etc., and, rather than to specify the printer, I clicked the button to let HP identify it. It came with the correct name (see post) preceding. Then, I downloaded and installed the full feature software and driver. The first attempt to print from Excel led to the mistake of page size, but, on a whim, I tried twice and had two successful prints without error. Until further notice, I mark this as solved problem.

    Thanks for your help,

    LK

  • HP officejet j4540 in paper

    I try to print on my HP Officejet J4540 all-in-one printer, but an error message "Out of Paper".  The printer has a sufficient amount of paper & will even print a test just fine... page and deal with copies of the scanner.  I cleaned the rollers and reset the printer by unplugging the power supply on the back for 30 seconds and reconnect but I still have the error message and cannot print.  How can I fix this error?  I can't send anything to print on it.

    There is a document with steps to help solve paper on a J4540 errors. Please check the steps described in the linked document here.

    I hope this helps.

  • HP Officejet 7500 E910: Paper stops feeding finally inch page

    I use my HP Officejet 7500 E910 to print a page of book of 12 X 12 scrap metal without borders.  The page is perfect with the exception of the last inch. The paper stops feeding the last inch or so while the keeps printing print head causing the ruined page.   The printer is about 3 years, can print 12 X 12 pages perfectly.   Any ideas?

    Hey @cnipko,

    Thanks for getting back to me on this subject. I am very happy to hear that your product is now print perfectly.

    If you think that the troubleshooting steps I provided has solved your printing problem, could you please mark my post above, as a Solution. This will make it easier for other users of the Forums of HP Support who have this problem find these steps.

    Thanks again for joining the Forums of HP Support. Good day!

  • OfficeJet Pro 8620: Paper feed problem

    New Machine - age for a day. Follow the installation procedure and a tray loaded with good paper 20 # 8-1/2 "x 11". When I send a print job to the printer - the finished sheet is great except for a double crease to the top of the sheet. It's as if she gets stuck, deform the sheet and then it ends. It is not appropriate for an office environment.

    This printer has a duplex on the back unit.

    Secondly when I put the tray paper for 4 X 6 photo paper and load the tray... it won't pull the paper and printing. The error message says to check the configuration of the status bar and load the paper - I have already done.

    HI @Scott18,

    Welcome to the Forums of HP Support!

    I understand that your day an old printer HP OfficeJet Pro 8620 is the rustle of paper and do not print on paper 4 x 6. I would be glad to help and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

    I can certainly understand how it would make you questions in an office environment. Looks like it's that a barrier inside the printer or a roller is defective.

    To try to fix the problem, I suggest that take a look deeper inside the printer with a flashlight to see if you can determine the cause.

    Please, try the steps in these guides:

    NOTE: Some steps several times may help solve the problem.

    If you have completed all the above steps and your product still has a problem, service the product. If the printer is within the buyers remorse period, put the printer in the point of sale or contact HP.

    Contact HP for service in all countries except Asia-Pacific.
    What you can do, is to use the following link to create yourself a file number, then call and it can help to expedite the appeal process:
    Step 1. Open the link: www.hp.com/contacthp/
    Step 2. Enter the product number or select Auto detection
    Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
    Step 4. Scroll down and click on: contact HP options - click Get phone number
    File number and phone number are displayed.

    Please reply to this message with the result of your troubleshooting. I can't wait to hear strings attached good luck!

Maybe you are looking for