HP Officejet 4500 G510n - z WiFi: double-sided printing

Similar Questions

• How to print on Officejet 4500 all in a double-sided?

  have recently set up my HP Officejet 4500 for use with I Mac with the latest operating system.  Unable to print double-sided WORD documenets.

  In addition, the legal size of loading platform document scanning are struggling.

  In addition, unable to scan several documents of the load plate so that each document is a unique document and not one of several files to the loading platform.

  Hello
  You can perform manual duplex printing by one of the methods below:

  To perform manual duplexing, Joanie you use the Pages to the printer setting, you can find below:
  http://support.HP.com/us-en/document/c01663233

  Thus, another alternative is to use the HP two-sided printing software:
  http://FTP.HP.com/pub/softlib/software12/COL35975/MP-88750-2/HP_Two-sided_Printing.dmg
  You can access this tool by clicking the PDF button at the bottom of the print dialog box, and then select double-sided printing and follow the on-screen instructions.

  Kind regards
  Shlomi

• oficejet 6700 premium: HP Officejet 6700 Premium WIN 7 - double-sided print - back comes out backwards

  HP Officejet 6700 Premium - os Win 7 - double sided printing - back comes out backwards. I TRIED TO DOUBLE-SIDE PRINTING, BOOKLET PRINTING, AND PRINTING GREETING CARDS. ALL OUT UPSIDE DOWN AND ALSO very small PRINT ON ONE SIDE OF THE PAPER HALF. HOW TO SET THE PRINTER SETTINGS BY DEFAULT OR CHANGE WHAT IS PAST?   Oh it then, I'm not yelling, just noticed the hats were on.

  Jay B.

  Hi @Jayburn,

  Welcome to the HP Forums!

  I noticed that the back comes out on top down, when duplex printing with your HP Officejet 6700 Premium, Windows 7. I am pleased to see that for you!

  Please, take a look through this guide, print on both sides of the paper (duplex printing) for HP Officejet Premium 6700 e-all-in-one printer (H711). Follow the instructions for Windows.

  Guidelines General double-sided printing

  Do not print on both sides of the following types of paper, or paper jams may occur:

  • Transparencies
  • Envelopes
  • Photo paper
  • Glossy paper
  • Paper lighter than 60 g/m2 (16 lb).
  • Heavier than 105 g/m2 (28 lb) paper.

  Several kinds of paper require a specific orientation when you print on both sides of a sheet. It's letterhead, preprinted paper and paper with watermarks and pre-perfores holes. The printer will print the first side of the first book. Load the paper with the top edge first and the side to be printed facing downwards.

  I hope this helps!

  "Please click the Thumbs up icon below to thank me for having responded."

• OfficeJet 4500 G510n: installation all-in-one printer

  The first step in installation is to click on 'Install', but the only option is "Exit". What Miss me?

  Tim,

  I'm not familiar with this error, or use Webroot security software.

  It sounds as if something is locked up - or blocked.

  The State of the printer is constantly changing: wireless status, entry and work completion, changes in the availability of the Internet (for ePrint), enters the State of ink.  The computer must have the permission and access of / to the printer to provide updates to the software of the printer.

  You may need to take a look at your Webroot security settings - and newspapers.

  If the system is aware of any issue, the Event Viewer logs may have made note of it.  The trick is to find and understand the data.

  Assuming that you don't find anything abnormal, only, you will need to restart all - this time this includes the router because it is one of the places where things tend to lock in new facilities.    If your router provides logging features good, you might be able to track all errors.

  Click on the Thumbs - Up Kudos to show that you appreciate the help.

  Click on accept as Solution when the answer provides a fix or a workaround!

  I am happy to provide assistance on behalf of HP. I do not work for HP.

• HP Officejet 4500 - G510n wireless all-in-one printer

  I pushed a few wrong buttons and have spent hours trying to get things back where they were.  I finally installed new drivers, but now a facsimile screen whenever I want to print!  I rarely use the fax and I would like that the screen go away.  How can I solve this problem?

  In addition, even if I installed new drivers, my printer says my device app error message install is incomplete and I go to the windows store.  I received my new drivers directly from HP... don't should not go far intant?

  Also, printing was erratic.  The last time that I tried I had a feeling it was slow, but I always had to deal with the annoying fax screen.  Help, please!

  Thank you.

  Ericasaunt

  Hi @ericasaunt and welcome to the Forums of HP!

  I understand that you have problems printing and fax.  I'd love to try to help you, but I need some information first. I'm a link a few HP Support documents below that will show you how to find what operating system you are using. In addition, if you are using Windows, please indicate if your operating system is 32-bit or 64-bit. With this information we can provide you with accurate information.

  Mac OS X: how to find which Mac OS X Version is on my computer?
  Operating system Windows am I running?
  Is the Version of Windows on my computer 32-bit or 64-bit?

  Also, you are connected via a USB cable or wireless?

  Please let me know what you find.  Thanks for posting on the HP Forums.

• OfficeJet 4500 G510n-z hangs up during installation or has missing file

  I have recently upgraded your older desktop for Windows 7-64 bit.   Everything works great except that I can't get my HP Officejet 4500 G510n-z everything-in-one-printer to install.

  I loaded the software before when the machine was working under Windows XP.  I recently bought a laptop and used the same CD software to install printer on this unit with no problems.  When I insert the CD and AutoPlay starts the Setup program seems 1) hang up in the step of verification system, or 2) declare that a file is missing (I don't know which) and then stops.  I tried to uninstall the software, tried to uninstall using Uninstall_L3.bat and restart the PC, to no avail.  I don't know what else to try.  Technical support costs, I could probably buy another printer.

  I tried to remove completely all the HP software from the office refurbished, but now I can't find the Util / CCC folder.

  How can I remove completely any / all traces of the HP from the desktop software?  Still working?

  My printer was working fine until I needed to upgrade the operating system to Windows 7-64 bit.

  brooksk

  Hi brooksk,

  Welcome to the HP Forums.

  I see you are having problems installing the printer on Windows 7.
  I'll be happy to help you.

  Here is a document to do a complete uninstall of the HP software. Lists all uninstall.

  Uninstalling the printer software.

  I disable all the start up programs and temporarily disable the Antivirus software to see if that is causing the problem. How to use MSCONFIG.

  Restart the computer.

  Then download, save, and then run the latest drivers.

  HP Officejet Full Feature software and driver.

  I hope this helps.

  Thanks for posting on the HP Forums.
  Have a great day.

• OfficeJet 4500 G510n-z: failure sending a fax from Word G510n-z

  I use a laptop Toshiba Satellite running Windows 10 with, AFAIK, updates. I am trying to send a Word document by fax to my connected OfficeJet 4500 wireless. The printing process works, I get the dialogue Send Fax, I dutifully fill. The document goes to the queue from print, then disappears. The printer is not composing or anything; the document will just in the bit bucket, without error, not even in the case log.

  Other relevant details:

  • I tried reinstalling the drivers; After several hours the skin of HP software, I did.
  • The laptop has 3 printers associated with my physical device: 2 printers generically named ' HP OfficeJet 4500 G510n-z ' and ' fax HP OfficeJet 4500 G510n-z "; and "HP # (HP OfficeJet 4500 G510n-z) ' (where # is a hexadecimal number of device-specific, I'm not willing to share here). The third argument prints correctly to the book.
  • I can scan documents through the HP Support Center application.
  • Copy and fax work correctly to the device itself. For example, if I have first print the thing, I want to fax, then by fax using the document feeder and the front of the device, it connects and sends the fax correctly.
  • The last time I checked, I was able with a fax in a program on my archaic Macintosh.
  • To repeat the foregoing, no errors are displayed or saved. Each attempt appears in the Fax as "Completed." log I don't want to get all the answers canned on the subject, thank you very much.
  • I browsed this forum of the community and support site and tried what I could find and understand how to do in Windows 10 of bugs. (Disclaimer: I've always been a Mac person and a VMS/Mac/Linux software developer, to try to understand how to do something which expected to be simple in Microsoft mess was not easy for me.) It is not suggested with a laptop given to his wife by a friend, however.)

  What unconscious thing [sic] I'm missing?

  Hello

  Please, look at the next post and make a good choice:

  http://h30434.www3.HP.com/T5/scanning-faxing-and-copying/want-to-send-fax-from-PC-in-HP-OfficeJet-4500-all-in-one/TD-p/1443895

  Kind regards.

• HP officejet 4500 g510n-z print but not scan

  HP officejet 4500 g510n-z prints ok but not scan

  A computer to Windows Vista 32 bit

  7 4 Windows machines

  Windows XP 2 machines

  running on the wireless have not tried usb

  No IP conflict

  worked the last time that I used it (months)

  printer works fine (even if I have to restart now and then after the mode 'sleep')

  latest drivers installed

  Ideas anyone?

  Thank you

  Hi sdrrmit,

  It seems that the printer didn't install correctly on your Windows operating system. Follow the steps below.

  First step: clear temp directory

  1. On desktop applications do a right-click of the mouse and select applications. In the application run, type %temp% .
  2. Select all the files in this folder, and then press the delete key to remove. If you receive a message that the file is in use, you will need to ignore this file (s).
  3. Proceed to step 2 below

  Second step: downloaded and extracted to your system:

  1 download the drivers and full software features

  The complete solution software

  2. once the download is complete, double-click the file to extract the software.

  3. when the installation window opens, press the Cancel button to stop the installation

  4. on desktop applications do a right-click of the mouse and select applications. In the application run, type %temp% .

  5. Locate and open the folder starting with 7z (example: 7zS2356)

  6. right click on the folder and select copy

  7. close this window and all open windows, and then in the Middle the desktop right click your mouse and select Paste. This will move the 7z folder on your desktop.

  8 open the 7z, that you just copied on your desktop

  9 open the Util folder

  10 open the CCC folder

  11 start the uninstall_L4

  12. once the uninstall is complete, restart the computer

  13. run Disk Cleanup by pressing the Windows and R key at the same time back the term calls and Type cleanmgr.exe and press to enter.  Select all the boxes and all delete. Click on the link below about this tool and no disclaimer.

  Cleanmgr Disclaimer

  14. download and install the latest version of Adobe flash player

  Update Adobe Flash Player

  15 open the 7z folder and then double-click the Setup.exe file that will be towards the bottom of the open window. Follow the instructions on the screen to reinstall your printer.

  Let me know if you are able to successfully install the software and driver and are able to print & scan?

• HP OfficeJet 4500 G510N-Z and Windows 7 Home Premium. Always a pilot missing after installation

  Sorry the post is so long...

  I have installed and reinstalled the software for my printer at least 5 times.  Whenever I get a message that the driver did not download properly.  I discovered that I get this message because Windows search driver on the "Windows Update" updates on the Microsoft Update page.  I use the printer on a wireless home network.  I learned to double check the connection and all is well.  I tried to scan for the first time yesterday and guess what?  Cannot find driver HP Document Manager and uninstall and reinstall the printer again.  I followed every suggestion support on the Web site and the drivers still don't load correctly.  Although I'm not an IT wiz, I'm very capable with computers and the resolution of problems.

  Please give me a solution time.  I interviewed for the job of my dreams last Thursday and I can not send a thank you letter or letter of reference which had been requested because of problems with this printer. I can't lose this job, in this market, it is once in a lifetime chance!

  Otherwise, I'll throw both of the HP OfficeJet 4500 G510N-Z I have a truck available bus or trash!

  Thanks in advance for your support and your help on this.

  Sincerely,

  Becky Gommel

  [deleted private information]

  Hi Becky,

  Follow the steps below

  First step: clear temp directory

  1. tap folder in the race or search programs and files of field

  2 Select all the files in this folder, and then press the delete key to remove. If you receive a message that the file is in use, you will need to ignore this file (s).

  3. proceed to step 2 below

  Second step: downloaded and extracted to your system:

  1 download the drivers and full software features

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-80348-1&cc=us&DLC=en&LC=en&OS=4063&product=3986399&sw_lang

  2. once the download is complete, double-click the file to extract the software.

  3. when the installation window opens, press the Cancel button to stop the installation

  4. tap folder in the race or search programs and files of field

  5. Locate and open the folder starting with 7z (example: 7zS2356)

  6. right click on the folder and select copy

  7. close this window and all open windows, and then in the Middle the desktop right click your mouse and select Paste. This will move the 7z folder on your desktop.

  8 open the 7z, that you just copied on your desktop

  9 open the Util folder

  10 open the CCC folder

  11 start the uninstall_L4

  12. once the uninstall is complete, restart the computer

  13. run disk cleanup from the tools Accessories\ system under all programs folder

  14. download and install the latest version of Adobe flash player

  http://www.Adobe.com/support/flashplayer/downloads.html

  15 open the 7z folder and then double-click the Setup.exe file that will be towards the bottom of the open window. Follow the instructions on the screen to reinstall your printer.

  Let me know if you are able to successfully install the software and driver and are able to print & scan?

• Problem drivers 5.0 HP printers Officejet 4500 G510n-z

  Hello

  updated drivers HP 5.0 from August 30. 2016

  Since then attempt to use the results of scan in "waiting for scanner ' for the ages or error of-9923. (This Officejet 4500 is a wifi printer)

  Generally, I use an extract and import from a scanner in the menu file, in which the printer is visible.

  Removal and reinstallation of the HP printer has not solved the problem.

  Did you notice similar behavior?

  Greetings to all.

  Same here :-( I had to buy a cable USB A to B USB to connect the printer/scanner directly on the Macbook, at least that, it works... always looking for a way to bring my analysis via WLAN...

• HP Officejet 4500 G510n Scan via airport utility?

  How can I get my HP Officejet 4500 G510n to perform a SCAN using airport utility?

  Airport utility is not related to operating an MFP. It there is no scan via airport utility function or any what router airport. That is, the printer must be connected through its network and NO USB connection to the router. What is the Airport base station is the printer is simply a network client. No printer function any is active via the airport.

  You must install the drivers HP and the complete software for any OS that you are running on your computer.

  http://support.HP.com/us-en/product/HP-OfficeJet-4500-all-in-one-printer-series---G510/3919445/mod ele/3986394/document/c0...

  It's the HP drivers and software that will allow you to scan over network. Or if NOT, maybe... often scanning on network is problematic.

• Scanning on HP Officejet 4500 G510n-z problems

  I have a HP Officejet 4500 G510n-z. I am currently on wireless and able to print without problem. However, when I try to scan, the display shows "NO Scan option. Refer to the documentation for the device to get out of trouble. Documentation of currency is not on the analysis of the questions and when I use the help function in the printer it tells me that there is "no computer connection. I have all set up and work wireless. Help, please! Thank you!

  Running the diagnostics to http://www.hp.com/go/tools can help solve the problem.

  If this isn't the case, you may need to reinstall the complete star driver.  What is your operating system?

• mirror printing with an HP Officejet 4500 G510n-z?

  Can I mirror printing with an HP Officejet 4500 G510n-z?  I don't see the option in the print properties.  just need a confrim.

  Thank you!

  Kath22, it is not a feature available for this model.

• OfficeJet 4500 G510n: I can not install my printer portable officejet 4500 G510n after updating windows 10

  Help please.  I tried for days install my portable printer officejet 4500 G510n to my PC G wireless that runs 10 recent Windows updates.  I tried everything, including the uninstall/reinstall but it is never successful and I understand the different problems every time.  I even tried setting up by USB... always without success.  I don't understand what is the promlem.  AND when I use one of the programs that install fails, it installs a solution for me for windows 8, which does not, of course, because I have 10. I really wish I had a printer again!

  Welcome to the @DLBHJ forums

  I hope to help with installation issues you are having with your Officejet 4500 on Windows 10. Here are some steps to start you off. When you are finished, just reply to me with the results, errors, etc. Any information you can provide will help!

  1 uninstall all printer software that is currently installed.

  2 restart the printer and the computer entirely.

  3. clean boot the computer and restart it: How to clean the boot

  4. when the computer restarts, download and install the software here.

  5. once the printer installed, return to the boot process and re - activate the start up programs.

  I hope this helps and works. Let me know what happens.

  Hit the "accept as Solution" if we reached a solution and the "thumbs up" to say thank you for my help.

• Officejet 4500 G510n-z hp Solution Center: does not install

  Recently updated for laptop with windows 8.1.   I have an officejet 4500 G510n-z.  The computer recognizes the printer and print.  My main problem is that I can not get the hp solution center appears.  Without it I can't scan.  The intall disk is outdated and I tried many downloads of software and the doctor print and scan without result.  Any ideas would be greatly appreciated.

  Hello cpilo1,

  You must use the full driver for your printer. Download the driver below and install it please.

  http://support.HP.com/GB-en/drivers/selfservice/HP-OfficeJet-4500-all-in-one-printer-series---G510/3919445/model/3986394#Z7_3054ICK0KGTE30AQO5O3KA30R1