HP Officejet 4500 wireless; Paperjam cleared. Device will not stop. "shutting down" message continues. Does not print even though watch print sent to the device.

Similar Questions

• Driver for Officejet 4500 Wireless all-in-one will not install after the upgrade to Windows 8.1

  Upgrade to Windows 8.1 on Pavilion g6.  OfficeJet 4500 Wireless all-in-one still print but not scan.  Downloaded driver full features.  Installation quit giving the error message "file not found".  Tried the 'chat' with no resolution sessions

  Thanks for the reply.  HP has called since then and was finally able to install the driver.

• HP Officejet 4500 - new black ink cartridge will not print

  I just replaced a depleted with a new cartridge, HP 901 black ink cartridge and the black has completely ceased to print.  I installed a new color cartridge and it seems ok.  I cleaned the printheads several times to nothing does not.  Can someone help me?  My OS is Windows 7.

  Well, I don't know why, but the printer started working normally again.  I had turned if off for about one day and decided to try one last time before junking it and don't be, you know, it worked!  After turning on the printer, I printed a 'State' of the control panel of the printer page and - no problem.  Then I tried to print documents from my laptop and still - no problem.  I guess only time will tell if the problem is actually solved, so I'm keeping my fingers crossed.  Lisa, I hope that the demon decides to leave your printer as well.  Good luck!

• My Officejet 6500 E709 all in one will not print black.

  My HP Officejet 6500 E709n all-in-one will not print black.   All other colors work very well.  Have you tried what follows - new black cartridge installed, ran the print heads clean utility, made sure the wind was compatible black ink cartridge, turned printer off and restarted.  Print tests still not print black - other colors and images to print, but not text black or shades of black in images.  Any suggestions on how to fix or what needs to be repaired?  Thank you.

  Hi jim: I just had the same problem a few minutes ago. After having gone through all the troubleshooting steps, I realized it was all just a bad cartridge. The PIN on the printer heads were not reading the new cartridge, so nothing in black print could be printed. I installed a new black cartridge and I could resume my printing projects. I then contacted the HP store directly to report the faulty cartridge while they could send me a new, that I won't be out of pocket for a cartridge I bought directly from them.

  Hope this helps you with your problem.

• My HP Officejet Pro L7680 all-in-one will not print blue but my ink level is fine.

  My HP Officejet Pro L7680 all-in-one will not print blue but my ink level is fine.  I tried aligning the printheads and clean the print heads, but still does not work.  Help!

  Thank you.  It seems odd that the magenta print very well and it seems that the cyan and magenta use the same print head?  I will contact HP support.  Thanks again for your help.

• Office Jet 6500 will not print after changing the ink cartridges

  Office Jet 6500 will not print after changing the ink cartridges

  Hello

  This doesn't seem to be a problem with the printer itself and not Windows. I also suggest to contact the manufacturer. In this case, HP.

  Please see here: http://www8.hp.com/us/en/support-drivers.html

• HP Envy 7640: HP Envy 7640 will not print photos from the photo tray

  I bought a HP Envy 7640 today, 11/05/2016.  It will NOT print photos from the photo tray.   The printer has paper in all trays, but keep taking 8 1/2 x 11 paper rather than photo paper.  I use the default application for the display of pictures (Microsoft Office 2010) and have tried selecting both the 4x6in of the index card. and sizes of 4 x 6/10 x 15 cm.  The end result is the same, an image printed in the middle of the plain paper.  I searched the forums and found that two related threads.  Given that I just install the printer today, I figure there will be newer drivers in the last hour, so I finished downloading "printing HP and Scan doctor."  He finds a "Match of Port issue" and that fixed it, but when I printed another picture, he was still on plain paper.  If I remove the paper and leave only in photo paper, the printer throws a fit and said that it is out of paper.  Any ideas?  I'm not a newbie, but in more than 20 years of use of HP products, this is the first time that I had to fill out a problem for a Board of Directors.  (And with the instant the ink program, it starts to accumulate the number of my printing without a single success.)

  RESOLVED - photo, once you select the printer & paper, you must go into OPTIONS, then the properties of the printer, then go to the paper/quality tab, then the paper Source and select manually the specific bac (bac/Photo main tray).  Sheesh, should we not automatic as soon as you select the paper size?

• Updated but will not print pages from the internet

  I had AdobeX, but he refused to print anything from Firefox, not even a selection. I deleted and I went back to 9.4, but it STILL will not print for me more. How can I fix it?

  OK, I got it - it turns out that the upgrade has changed the default printer in the settingds for Firefox... I won't go back to 9 or X however, as others seem to have hurt, too.

  FIXED - FIXED - FIXED

• OfficeJet Pro 8500 a Premium yellow will not print

  I am not able to print Yellow.  The quality of the print head is 'good' on my two print heads.  I cleaned the Black/Yellow Printhead (which was dirty) and electrical contacts.  There is no break in the inktubes.  Original HP cartridges were full (although with all attempts to realign and clean, they are now all almost empty).  Print quality report shows no white dark lines or gaps in the Test focus3.  The reason for Test 1 shows and connected lines.  Focus 2 shows not yellow, but without streaks white through any of the colored blocks.

  So I think I've covered everything except the replacement of the print head.

  The question is to know if I can wait that it will change the situation to change the print head or if I have to get the printer serviced - and, as it is out of warranty, if it means that the cost of the service outweighs the balance of the cost of obtaining a new printer.

  What do people think?  Is that what sounds like a new printhead will correct the situation?

  Thanks in advance.

  Hello Cherniack,

  Welcome to the Forums of HP Support!

  On the Officejet 8500 has not not printing yellow and all the troubleshooting steps you have done, I would say that Yes. Replacement of the print head would be your next best step.

  Even if the printer is out of warranty, the print head may be covered. It is guaranteed is distinct from the printer and is located on the side of the printhead:

  If your print head is under warranty and you call in North America, the number is 1-800-474-6836 and for all the other regions, click here.

  If the print head is out of warranty and you want to order the replacement, visit HP SureSupply.

  Thanks for posting,

• HP 6510 printer will not print iPad, ok the mobile, wireless

  Everything worked until today. When you try to print wirelessy to ipad, I get a message saying the printer is offline. This also happens with our second ipad. It prints the laptop wireless.

  Hi reg12,.

  I see you are having problems printing from your iPad.  I would like to try the following steps.

  1. unplug the printer and router

  2. connect the router to the top after 2 minutes

  3. once the router is taken printer upward.

  4 Powercycle iPad.

  5 confirm the iPad is on your wireless network.

  6 attempt to print.

  Let me know how it goes.

• HP Officejet 6500 a: HP printer Officejet 6500 a is inactive and will not print

  I have a HP Officejet 6500 has everything in a printer.  I recently moved to a new home, so new wireless IP address, I think that I have configured correctly according to the directives of the printed Test page.  I also have a key USB connected to print, as I hardline so when in my office for heavy work. The printer says inactive, and I can't print.

  You're welcome, I'm glad that's settled.

  When you see a post that will help you,

  Who inspires you, gives a cool idea,

  Or you learn something new.

  Click the 'Thumbs Up' on this post.

  My answer-click accept as Solution to help others find answers.

• HP Officejet Pro L7680 All - in - One will not print black

  Original title: HP Officejet Pro L7680 All - in - One

  I started my printer and it won't print in black.  Don't copy in black no more.  Test page does not work and the color works very well.  I changed all the cartridges, so it isn't the ink... No idea what is the problem?  He served 6 months off and disconnected.

  Hello

  This forum is for comments on the Forums for answers and you should ask at your
  questions in the Windows Forums for answers corresponding to your version of Windows.

  Answers - Windows Forums
  http://answers.Microsoft.com/en-us/Windows

  It also helps us to help you if all the useful information.

  How to ask a question
  http://support.Microsoft.com/kb/555375

  ==============================================

  In this case you should check with HP Support, their documentation online and drivers,
  and ask questions about known issues in the forums of HP.

  Support HP & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  I hope this helps.

• 6500 a Ofdficejet: my HP Officejet 6500 will not print black. The cartridge is full

  My printer prints black; the cartridge is full and recognized.  There seems to be a loose rubber around the print sensor ring

  Hey @PickDan,

  Welcome to the Forums of HP Support!

  I see that you have problems with the printing of the all-in-one printer Officejet 6500 a. I can help you with that.

  To start, make sure that the printer is plugged directly into a wall outlet, not a surge protector. Once completed, this document describes How to solve print quality problems with your printer.

  If after the above, that you are unable to print correctly, the printer must be replaced. You can contact the HP Support by clicking this link and filling out the form below to see what options are available.

  Please let me know the results after following the above. If you are unable to resolve your problem, please click on the thumbs up icon. The two icons are below this post.

• Firefox will not open even for a split second, shows the page to update norton toolbar in this time and closes before I can even click on anything whatsoever

  Firefox refuses to stay open for half a second. I deleted everything regarding Firefox on my computer, have run Norton Power erasers, am running a full system scan, and even tried to see if Norton was blocking it somehow. I don't know if it's some sort of error, processing, because the last time it worked he asked to update to firefox, and then he said that it was not compatible with the norton toolbar. After update, it crashes like this. I have re-installed many times off my internet, checked the Task Manager and nothing. I have no idea.

  System: Windows 7 32 bit, running on an eMachines computer. Never had this problem before.

  I actually ran it as administrator and it seemed to invite firefox finally to do whatever the heck he was doing. Thanks for the help!

• Plugin unsigned, dotEpub, will not show even though it says "precede at your own risk."

  I have the plugin dotEpub installed, and the sheet shows as not signed/not approved. I used it for awhile and I trust in it and it seems to be the 'opportunity' to proceed at my own risk (which for me is not a risk), but the plugin is invisible no matter what. So I feel I am obliged to do not use something that I am very good with the help of. So, how can I "proceed at my risk?

  See also:

  • https://support.Mozilla.org/KB/add-on-signing-in-Firefox
  • https://wiki.Mozilla.org/addons/Extension_Signing
  • https://blog.Mozilla.org/addons/2015/02/10/extension-signing-safer-experience/