L7780 All in One – Windows 7 Clean install - error when printing

Similar Questions

• Printer (n911a) e-all-in-one HP Officejet 8600: higher margins when printing Pages

  I use a Hp Officejet 8600 (N911a) e-all-in-one model.

  Windows 7 64-bit SP1

  The printer is updated to the latest versions of firmware and software.

  Browsers: IE 10, Firefox Google Chrome 32 26

  It is using wireless (wireless router)

  When I try to print something, she often prints too large

  (for example, when you print a coupon, he eventually print half left of the coupon because half right extends beyond the margin of page). You can only print coupons a limited number of times.

  I am able to change the print size in IE 10 by right-clicking > print preview > and size reduction before you print it. Firefox is always printed on the margins.

  I tried using the print Hp and Scan troubleshooting utility doctor. It found no errors.

  Note: this problem is not occue when I choose to print to a different printer (HP LaserJet Professional M1217nfw MFP)

  I am a student, so I insist a lot on this printer. All advice is appreciated.

  Thank you!!!

  Hello

  It looks like firefox and printer compatibility. Firefox has just released a document fo adjust the print settings.

  http://support.Mozilla.org/en-us/KB/fix-printing-problems-Firefox

  Hope this will help you.

  Good impression

• Installation of the HP Officejet Pro L7780 all-in-One

  HP Officejet Pro L7780 all-in-One

  Windows 7 64 bit

  Hi, I have downloaded software from HP in order to install my printer. For some reason any installation fails and I would really like to help. Step by step of my installation procedure->

  I run the program "to add a series of all-in-one Officejet Pro unit

  I chose the wireless connection

  The program runs and find a printer 'Officejet Pro L7700' I select it and click Next

  He runs the installation for 5-10 seconds, and then it says that the printer was not complete.

  I ran the install several times (also after restart the printer and the computer) moved always

  The connection of printers is configured properly, to the best of my knowledge.

  It also print documents computer wireless. My problem is that I can't scan a document to your computer. When I choose the scan of the computer, it tells me that there is no scanning settings.

  I have no idea what to do...

  Hi RazorkillerC,

  You can scan from the HP software successfully?

  1. open the Solution Center, and then select settings

  2. select scan settings

  3. delete the shortcuts on the right side

  4. click on the device to update, and then close the scan window

  5. open again the scan window

  6. add shortcuts on the left side to the right side

  7. click on the device to update

  8. try scan from the front panel of the printer

  

• Unable to get updates of Windows after cleaning installed.

  Inspiron 1720, Win7 Ultimate x 64

  A clean installed today on a separate partition. Did not remove the existing installation of the same operating system by using the same key. The new facility will not download updates. C:\ shows many files from Windows.old. No matter what jump to anyone or is this Win10 Win10?

  PS This switch to Win7 Professional would help the situation?

  I should add that it is a slipstreamed SP1 version. I was able to get IE 11 installed without problem.

  Theres been a few problems with Windows Update with Windows 7 clean install for these last months... You can use the WSUS Offline Update Patch Windows 7, after that Windows Update works.

  http://dellwindowsreinstallationguide.com/WSUS-offline-update/

  However since your goal is to make your system a Pro 10 Windows device. You better just download an .iso Windows 10 TH2 and pure install directly with your Windows 7 Ultimate product key:

  http://dellwindowsreinstallationguide.com/download-Windows-10-OEM-and-retail-ISO/

  https://www.YouTube.com/playlist?list=PL1RkaknDn7v-Ucth4gt0U3BHVSY7oNkWr

• Black cartridge HP PSC 950XI all-in-One HP 78XL mark stop error messages.

  Black cartridge HP PSC 950XI All - In - One HP 78XL mark stop error messages "" error: installed incorrect color cartridge ";" "" Install the color cartridge"and"install the color cartridge. I cleaned the contacts on the printer and cartridge and printhead. Cannot make it work.

  I've tried everything and still get error messages that continue to change so I can say that things are get cleaned but this cartridge is just not good. I ordered more than HP 78 and 78XL cartridge. If they show mistakes I'll let you know. Thanks for the suggestions, there was one that I had not tried before so I will certainly remember.

• I replaced my Photosmart 2570 all-in-One with Photosmart 5520. I can print all programs except

  I replaced my Photosmart 2570 all-in-One with Photosmart 5520. I can print to all programs except the HP Image Zone. It shows the right default printer. When I print a photo 4 x 6 prints only part, and it is slightly enlarged. My operating system is Windows XP. Do you need any other information? Thank you. Peggy

  Hi PeggyOlson,

  It is an older program used with your 2570. Try to download and install the new photo software from the link below.

  HP Photo Creations

  HP Photo creation FAQ

• All-in-one HP Photosmart C4150 says paper when it is not

  All-in-one HP Photosmart C4150 said paper when it is not. I reload paper and press ok and get the same answer

  In general, this is due because the rollers of the printer is dirty, or are not engage as they should. The document below should help you to solve the problem. If this does not work, you can have a sensor or other mechanism, out and need to replace the printer. Let me know what happens.

  http://goo.GL/US1fV

• I just bought a new laptop with Windows 8 is installed. When I try to install my printer, I get an error saying that there is no driver. Where can I download a driver for this printer and the OS from?

  I just bought a new laptop with Windows 8 is installed. When I try to install my printer, I get an error saying that there is no driver. Where can I download a driver for this printer and the OS from?

  Also, where can I find a list of compatible printers?

  I just bought a new laptop with Windows 8 is installed. When I try to install my printer, I get an error saying that there is no driver. Where can I download a driver for this printer and the OS from?

  Also, where can I find a list of compatible printers?

  Hello

  You can use the Windows 8 Compatibility Center to find out if a device is compatible.

  Windows Compatibility Center: find updates, drivers, & downloads for Windows 8, Windows RT:
  http://www.Microsoft.com/en-us/Windows/compatibility/WinRT/CompatCenter/home

  FAQ - Windows Compatibility Center:

  http://www.Microsoft.com/en-us/Windows/compatibility/WIN8/CompatCenter/FAQ

  Concerning

• Unable to install printer Deskjet F4280 all-in-one Windows Pro 8.1

  A week ago my laptop with Windows Pro 8.1 was a significant error and he stopped, then I restarted the operating system with a previous image of the hard drive C. I reinstalled another printer and I tried very time to reinstall the HP Deskjet F4280 all-in-one with the latest driver and with the installation of the Printer Wizard uploaded by HP web site. Unfortunately every time installation fails during step "product configuration" after a lot of minutes to expire. The error was the last time.

  CSetupWrapperApp: No section name specified on the command line
  = Application did not return ERROR_SUCCESS. Returned 0 x 1
  LaunchApp (x:\hpqtra08.exe-arret, 1, 00000000, 00000000) failed with 2
  Error opening key HKLM\SOFTWARE\Hewlett-Packard\Install\{8C925017-72A8-4C4A-AF21-84901E26638F}. error = 2
  Timed out waiting for event of finished product.

  I used your HP print and Scan doctor and I followed all instaructions and in the end, no solution has been discovered. Other applications normally run without problem and laptop works fine. I installed Windows Pro 8.1 almost a year ago and until a week ago, I have no problem with the HP printer above. I can solve this installation problem?

  Best regards

  Francesco Patrignani

  Multifunction,

  Thank you for the update. The registry document I sent should apply to all computers in Windows 8. Please try to follow these steps.

  If you do not provide the error log, which could be very useful. This will help me to refine the question. Also, I do not fear spend 20 minutes reading code until something is different.

  I will help you with pleasure until the issue is resolved. If you find my help, you can keep tagging my posts with congratulations and accepted Solutions. It would be appreciated.

  Have a great day!

  Mario

• Desktop all-in-one HP 2113w 19: install Windows 7 or 8 on desktop PC HP all-in-one 19-2113w...

  I need to install Windows 7 or 8 on my HP 19-2113w all-in-one desktop PC. The machine came with pre-installed Windows 8.1.

  I have a copy of Win7, but my product code is expired.

  What is the cheaper, faster and less painful way to solve this problem?

  Thank you.

  R. cline

  Hello @rcline7,

  I read your post on how you're looking to install Windows 7 or 8 on your desktop computer, and I'd be happy to help you in this case!

  To retrieve a copy supported Windows for your computer, I recommend that you follow the steps described in this document about getting a HP recovery disks or USB HP recovery disc.

  Please re-post with the results of your troubleshooting, and I look forward to your response!

  Concerning

• All-in-one HP Officejet J5740 install failure on Windows 7.

  The printer will work, but I can't get the installation CD because it is for Windows 2000/XP. My new Lenovo desktop computer is running Windows 7 Professional. However I have XP Mode installed with it. But when I go to install this program I get a message that says that my system requirements are not correct and install it on Windows XP. I know he is an all-in-one older, but it works very well. I hate to have to buy another just to get the scanner to work and get my programs from the HP Solution Center. I do not use for faxing more since I don't have the need.  I have read all the other posts and tried a few, but nothing helped.

  Suggestions are greatly appreciated.

  Hello

  Without a doubt you need driver for Windows 7 on your machine. Please go to this site, select the good OS (32-bit or 64-bit), click Next and download the driver for your printer.

  Kind regards

• OfficeJet pro L7780 all-in-one: full functionality of the driver and the software crashes to configure product.

  Windows Home Premium 64 bit operating system. Download full feature software and driver and follow the installation instructions. All software and drivers seemed to install but at the last stage (configure the product), it crashes after a few minutes and a fatal exception message (no error number). After this, uninstall all the software.  I took the following troubleshooting steps:

  Disabled all the normal startup items and services (except Microsoft) in MSCONFIG. As an administrator, and under Vista compatibility also led installation.  In addition, tried a basic installation.  My computer is a Dell PHE 8500 and is wireless. I tried installing several times in respect of the connection of the USB cable directly and wireless, but all had the same result. Completed all the steps except the last where the fatal error message appears after a few minutes.  Help

  Thought I would give it another chance: I've done the following:

  Ran L4uninstall.bat

  American ran Care System: registry clean and disk cleanup

  Connected accessories/tools disk cleaning system

  Restarted

  Insured that lates version of Adobe Flash Player has been installed

  Latest version of the software downloaded to the printer

  Went into MSCONFIG unchecked load startup under selected startup items checked "Hide all Microsoft Services" and disabled the rest of services under services,

  Restarted

  A ran another check of the register with the American healthcare system

  Ran disk clean again

  Off DSL modem

  Firewall and AntiVirus disabled Norton

  Restarted

  At installation of the printer as follows: first of all installed drivers

  Restarted

  A ran the remaining printer one by one with Solution Center last softerware

  Restarted

  Is surprised that Solution Center has worked without problem

• Windows 7 - clean install - missing drivers

  Hello

  I recently installed Windows 7 Ultimate on a machine that was previously running Windows 7 Professional.  I opted for a new installation instead of an upgrade installation.  The problem I am running into is that some of my drivers are missing.  I tried to get the drivers in the folder Windows.old\Windows\inf, and it seems to find them.  However, when I try to intall the drivers I get a message saying "Windows found driver software for your device but encountered an error when installing it...» Windows cannot find the specified file. »

  I was wondering if there was a way to get this to work, or if I should just look on the Internet and try to find the drivers.

  Another note, when I try to automatically find the drivers, I get no results.

  If it helps, my computer is a Toshiba Satellite S850 and my missing drivers are:

  • Network controller
  • SM Bus controller
  • USB Bus controllers
  • CRW - USB2.0

  Thank you

  Eric Carlton

  Technically, they are not missing. Whenever do a clean install (the best option) you always
  to install the drivers for the motherboard, dedicated graphics card (when there is one), options and peripherals such as printers and keyboards with profiling.

  Download the drivers from the motherboard of Toshiba's web site. The drivers in your list are commonly
  called the chipset drivers, because they are all functions of the chipset motherboards (Notrh bridge
  and the South Bridge).
  There was also the CPU drivers and it is Intel HD integrated graphics card. Windows does
  install a generic graphic VGA driver, but you need the Intel drivers for all of the features of the
  Integrated HD graphics card.

  While you're at it install all Windows updates. Configure the option Windows updates so it
  do not download and install automatically, so you can install them is small. There are
  less likelihood of corrupt updates if you do it this way. You should not have more option
  updates.

  Also update DirectX-
  Download details: DirectX end-user performance

  .

• Pavilion G6-1d21dx: necessary drivers after Windows 10 clean install on g6 (g6-1d21dx Pavilion) Pavilion

  I tried the HP support site, but I don't see any drivers for any available OS for my model, the g6-1d21dx Pavilion.

  I did a clean install of Windows 10, but the Wi - Fi button does not work. Apparently, there's a pilot called HP wireless button that I need to install. When I do a Google search for it, there is a link to HP's download page, but the link seems to be dead.

  HP allows us to download drivers more? It's frustrating, because drivers must be simple and easy.

  Can someone please tell me where I can get this and all the other drivers that I might need after doing a clean install of Windows 10?

  Thank you.

  Well, I think I solved the problem. The first time I did a new install of Windows 10, didn't have an Ethernet cable connected to the computer. This leads to all sorts of problems, including a lack of access to the Internet and some devices are not installed correctly. I reformatted the SSD drive and cloned my old hard drive, but that resulted in a very slow performance, then I would get errors every other time I start the computer (inaccessible_boot_device, unexpected_store_exception and kernel_data_input_error). In addition, the hard drive that I cloned has been running the 64 bit version of Windows 10, and I wanted to try the 32-bit version, because I want to use some software of old who will not run on 64-bit Windows 10 (for example, the Spanish dictionary Oxford SuperLex 3-in-1, French and German).

  Last night, I did another installation of the 32-bit version, but with a network attached cable. This time, after installation and update of Windows, all my devices appear to be installed and working properly. This includes the Synaptics touchpad, the HP wireless button, the AMD Radeon graphics card and the Realtek card reader. I didn't need to install whatever it is myself, and the Device Manager does not display the unknown devices. In addition, installation completed MUCH more quickly with the connected network cable.

  Conclusion: If you clean - install Windows 10, I highly recommend that you do so with a network cable attached so that you will have access to the Internet when it is necessary during installation. With fixed cable, both my wired network and my Wi - Fi network have been detected during installation. Wireless network connected, even my Wi - Fi was not available during the installation.

• HP Envy TS m7 Ntbk E0K99UA #ABL: HP Envy laptop Windows 10, clean install and reinstall applications preinstalled

  Hello

  8.1 Windows, I've just updated my HP Envy laptop to Windows 10. I now have a Windows 10 product key (that I found using the Microsoft tool productkey. The update went well. All the drivers have worked. The question isn't here.

  I have to do a clean reinstall of the laptop. Too much shit...

  I know how Windows 10, but I don't know how I'll be able to reinstall the app pre-loaded, he came with the laptop.

  Firstly, Windows 10 kind of RecoveryMgr blocked... I just can't access more...

  If I boot with the drive D or the backup media, I created, I'm only given the opportunity to reinstall completely (but, of course, for Windows 8).

  Two questions:

  1. from the D drive or my backup media, is there a way to separately select application to install? (Everything seems compressed and it allows me to start the installation of each software program.

  2-if I reinstall Windows 8 using backup media, I created (or d reader app), I'll have my own installation... but I'll be able to re-update to Windows 10? (remember, I now have a product key...).

  Thank you.

  Sébastien

  Your best option would be to use the recovery media to reinstall the original OS. Since you have an activation key of license for the original operating system meets the requirement to update Windows 10.

  Once you have done this, you can use the key to creation of Windows Media to create a bootable installation flash drive or to proceed directly to Windows 10.

  Windows 10 installation as an upgrade has the advantage of you to have the applications installed at the origin of the original OS present and ready to use in your new installation of Windows 10.

  Otherwise with a clean install of Windows 10, the HP Recovery Manager wil do not exist, or you can install it separately.