Offcejet Pro 8600 more: printer offline

I have no problem with my printer since I got up until recently, when he begins to have problems to connect to my WIFI network while all my peripherals WIFI enabled have no problem to connect to my wireless router.  I ran that the wireless network test and came out ok, as he says, "no problem found.  Congratultions on successful your printer wireless installation.  When I tried to reconfigure my wireless setting, it was able to detect my network and close it every single WIFI network and still it will not IP connection.  Even after reset to factory default and reconfigure all the settings, it will not connect to WIFI.  Help, please.

Thanks for letting me know this information @Erick1.

Given that the router always shows the IP address assigned to the printer, it looks like the right printer is not wake up properly. You can power cycle the printer and it is connected to new property.

I would say to configure a static IP address for the printer.

HP Officejet Pro 251dw, 276dw and 8600 Printer Series - printer does not keep the wireless connection.

You have the current firmware already installed? If you do, then it won't need to update.

You can print the Configuration Page to find this information. HP Officejet Pro 8600 (N911), 6600 (H711) Officejet and Officejet 6700 (H711) Premium e-All-in-One Printer Series - printing a Network Setup Page.

You have a double router broadband?
If it is set to 5 GHZ network, you may need to change to 2.4 GHZ. (rename the 5 GHZ or turn it off)
The WPA key setting must be on AES to work properly not TKIP.

You will probably need to contact the router company to check these settings.

Move the printer and the computer more close to the router, but not less than 6 ' (1.8 m).

Wireless signals may be lower at a greater distance between the printer and the router.

Remove any metal object between the printer and the computer and the router. Objects such as refrigerators, ovens to microwaves or metal shelves can interfere with wireless transmission.

Move any device that emits radio signals, such as the microwave ovens and cordless phones, farthest away from the printer. These devices can interfere with wireless signals.

Please let me know the results. Thank you.

Tags: HP Printers

Similar Questions

  • How can I set up my new Officejet Pro 8600 more printing on paper photo 4 x 6?

    How can I set up my new Officejet Pro 8600 more printing on paper photo 4 x 6?  I'm running on Windows 7 64 bit.

    It's strange.  Looks like you have a second paper tray and put it to the default tray.  The second paper tray only supports the types of paper that show on your list.  It's strange because unless you have purchased a second tray paper, plus model has one.  Does only the high-end model.  Other than that, only certain types of media can be duplex, so if you have double-sided printing, it can limit the selection.  I'll watch what else could be the cause and get back to you.

  • OfficeJet Pro 8600 more printer

    I just bought the printer more Officejet Pro 8600 & installed without any problems, but it doesn't connect to the internet/web services? It is connected to my home network & print etc, but when I try to activate the internet according to the guidelines, it searches for a while with "Enabling Web Services (ePrint & Apps)" on the screen & then reads "Web Services (ePrint & Apps) could not be activated.

    When I tried to activate the web service during the instalation, reading pages as if she did not go off I would go to a page to download the necessary drivers but this never happened and the only thing I could do was to select the button 'Next', who finished the installion without the work of internet/web service.

    Does anyone know of this problem and if so, please can you me how to connect my printer to the internet.

    It's great to hear Roses66. "If you could mark my previous post with the ' accept as Solution" it will help others in this community to find our easy conversation.

  • HP Officejet Pro 8600 more print but not scan

    I have an Officejet Pro 8600 and I use Windows 7 Ultimate (64 bit) and it print and copy but will not scan. I had a hell of a time trying to get this thing to scan - I even spent an hour and a half with HP technical support and they could not fix it and finally gave up and call me Micro$ oft said that it must be a windows problem (Windows is up to date, incidentally).

    I tried to open the scanner software and nothing happens when I click the icon - the loading icon flashes for a second, then only the mouse pointer. Nothing happens if I try to boot from all programs. Nothing happens if I try to scan to the computer of the other printer told me the failure of sweeping and that there could be reasons of severalpossible (unrelated, software used, etc.).

    I have installed and uninstalled. A couple of times he was having trouble with the installation, but finally got it connected. Once it would not uninstall in Control Panel until I did it directly from the HP folder. I connected it by USB and wireless. I installed the version of bloatware. I cleaned that out and I tried the only version of drivers. The HP support person had me go and removed a bunch of stuff in the registry. I tried to run as an administrator. Nothing works. I even tried to scan using Windows Fax and scan. I disabled Kaspersky and made sure that my firewall is turned off.

    I am at my wits end with this and certainly regret my purchase at the moment. Help!

    Hello, it happens to the analysis of Windows (WIA) and generates an error:

    "The Windows Imaging service does not work... If the problem persists, you will not be able to scan using the applications that use this service, such as Microsoft Paint. Scanning software HP could still work. »

    It asked me to restart, and then re-run the diagnostic tests, but I got the same result.

    Then, I jumped to HP Scanner Twain and got another error:

    "The Twain component is not working properly because the product is used by another process. Save your work and close all applications. Turn the product off, turn it on again, and then click on restart and repeat the test. »

    He told me then the problem persists to uninstall the software, then reinstall the Full Feature software (I did, but available).

    * EDIT

    Problem solved!  After you had me run the diagnostic tool I googled the WIA problem and found that many other people had the same problem. A person has a response from Micro$ oft saying that it was a Windows 7 issue and how to fix it - this is the text I found:

    To start the WIA service, you need start all services of dependence. To start the dependency services, please follow the steps mentioned below:

    -> > click on start-> type "services.msc" and press ENTER, once you get up the services window, please do the rest steps.

    -> > first check and write down all the dependency services: -

    -> > right WIA-> properties-> tab dependence, check the services of name listed there.

    It must contain the following services:

    * RPC remote Procedure Call

    -> > DCOM Server process Launcher

    -> > RPC end point mapper

    * Detection material core

    Make sure that all of the above services are started in the services list.

    Last time, we started the Detection hardware Kernel, which solves our problem.

    (Andy, it's important.  Choose "Detection hardware Kernel ' and start this service which should start your 'Windows Imaging Acquisition '.  If it does not then select WIA and change the departure to "automatic".  This fixed my problems) after all dependency services start, please try to start, WIA service to solve the problem of .                                                                                                                                                                                       

    (For those who are doubtful with computers, like me, when you click on the start icon, you can type services.msc in the box of research programs or click on run and type it in there). Once inside the list of services, you can look at the dependencies by right-clicking on the Windows Image acquisition service and selecting Properties. Take note of these dependencies. Then back to the main list and watch to see if these dependencies are started. My Shell Hardware Detection says disabled, so I right click on it; However, starting selection is grayed out and I couldn't select it from the drop-down list box, so Startup type I selected Automatic, apply, close the Services window and then started my Scan software and presto, it worked.

    Thanks for setting me on the right track!


  • HP officejet pro 8600 more printing envelopes chemistry

    The normal printing process seems to work perfectly, only when printing envelopes #10 they live I have the problem with the crooked not printing any way how the envelope is inserted according to the Setup (Microsoft Word).

    To date, the following steps were taken:

    1. the version of the firmware is up to date: CLP1CN1322CR

    2. all the rollers are clean and act freely, no paper jams/particles anywhere - front or rear.

    3. the envelope seems to come out all right (looking directly at the front that it falls on the paper tray.

    4. different types of envelopes #10 were tried.

    The twisted print template is not consistent, sometimes it low angles differently and sometimes the implementation of the address of the sender and the recipient are different.

    Any suggestion would be appreciated.

    PROBLEM SOLVED

    The result is: READ THE MANUAL

    I had been assuming (incorrectly) OfficeJet Pro 8600 Plus would print the same as my previous HP OfficeJet Pro L7680 envelopes.  This model allowed me to print envelopes by putting on paper envelopes, I already had in the tray, put the envelopes on the side right side down.  He had always worked before with no problem and the envelopes printed correctly, even if you could use the status bar and adjusted the sides to accept the correct envelope size (never tried).

    On the 8600 model, you MUST remove any paper in the tray and load the envelopes in the Center, adjusting the sides to the size of the envelope.  In ADDITION, you must insert the face or envelopes down with the edge of the flap that is pointing to the right, a bit like the graphics on the bottom of the stage show.

    IF YOU USE MS WORD TO PRINT ENVELOPES AND LABELS, IT MAY BE CONFUSING BECAUSE IT SHOWS 6 POWER AVAILABLE, IF YOU CHOOSE THE ((QUATRIÈME DE LA DROITE) METHODS, IT SHOWS THE ENVELOPE IN THE MIDDLE AND THE EDGE OF THE FLAP FACING RIGHT, THIS CAUSES THE IMPRESSION OF BEING UPSIDE DOWN ON THE ENVELOPE.)

    That's what you should first read the User Guide (manual) for for the 8600 printer printing envelopes:

    Print on envelopes (for Windows, p. 39)

    Load Media (p. 24)

    Load the envelopes (p. 25)

    My frustrations have completed cockpit error.

  • OfficeJet Pro 8600 more: printer will not recognize this yellow cartridge has been refilled.

    The printer would not print because the yellow cartridge was totally exhausted.  I had all the colors of three cartridges filled at Costco and reinstalled the printer.  Still not printed - he continues to say the yellow cartridge is completely empty and must be replaced.  How can I do recognize that this cartridge has been refilled?

    Replace all cartridges per HP cartridges to see if it solves your problem. If so, suspect that the reloaded cartridges were damaged by Costco.

  • HP officejet pro 8600 more: printing problems

    When you print pictures and other things my photos are coming in search of all the yellow and I don't know how to solve the problem.

    worked well and for some reason any does not know what happened.please help it is really doing my head.

    If the magenta (Pink) does not print correctly and that the steps outlined in the document that I provided above do not resolve the problem, you will probably need to replace the magenta ink cartridge.

  • HP officejet pro 8600 more: hp officejet pro 8600 more prints from iphone cell phone

    I use this printer for several years with no problems. I've already printed for numere and iphone / ipad. Yesterday my laptop ordinary started to give me problems and I have to reboot constantly. Today, my printer started giving problems. It works with the iphone feel but my laptop does not work. I followed doctor scan and it says that it cannot solve the problem. I unplugged the router, then printer, left off the coast for 60 seconds and then re-connected - first router, then printers. Always the same results. I see the file in my queue of the printer, but it does not communicate. I noticed that the blue wireless to the left of the home screen display is not on. The results of the test wireless network prints a page that says no problems found. The ip address is 192.169.1.2; However the address on the actual printer had a different extension. I need to use this printer for work documents.

    He says that the printer cannot be contacted over the network. Also says the device is off. However, if I print from iphone, it works.

    Can someone help me?

    Think about scoring the post that solved the problem as 'Accept as Solution' while others having problems may find that worked for you.

    And Yes, the wireless light should be on, except if you have an Ethernet cable connecting the printer to the router in which case the without wire would be disabled, but the printer would operate on the network and have a wired IP address.

  • Office jet pro 8600 more: printer code request

    I do not know and can not find my printers code application so I can add to my connected hp account and change his email address so I can print from my carrier wireless 4G LTE network.

    Hello

    It is a series of questions. Still, you need to connect to the internet first until you can get a claim code.

    No link, no code claim.

    Have back to your other post, you managed to get it to connect to the internet? It is much easier to follow when using a post rather than spread around many messages.

    Kind regards.

  • How to print envelopes and labels on an Office Jet Pro 8600 more all-in-one

    Envelopes and labels can be printed using the paper on top of the Office Jet Pro 8600 more printer all-in-one?

    If printing envelopes the lower tray, should I remove the paper from the tray and adjust the margns?

    cor21911,

    You are not able to print labels or envelopes of the ADF, for copying or scanning only. Also, it is not necessary to remove the regular printer paper to print on these types of media, even if it can make it a little easier. All you have to do is go to word or any other type of program allows you to print and select the appropriate model label or envelope and follow the instructions.

    Let me know if you need additional assistance.

  • OfficeJet Pro 8600 more full page

    How can I get the HP Officejet Pro 8600 more printing bleed? In portrait mode, it leaves a. 1 "margin on the right side and bottom. I went into the menu advanced and selected without border and use of photo paper.

    Thoughts?

    Hello

    Which application do you print? What is a photo/image or text? Please check the following information (from manual page is #43):

    Kind regards.

  • HP Officejet Pro 8600 more N91: Printer crashes with 0xB845D7DC when connect to UPC Ubee cable modem/router EVW3226

    Printing: HP Officejet Pro 8600 more e-All-in-One Printer - N911g

    SN: [personal information]

    REF: CM750A

    FW: CKP5CN1516AR

    Then try to connect to the router wireless (active DHCP), the printer LCD display starts to blink and a second, it displays B845D7DC.

    After that, the printer asks to reset and it restarts with wireless off.

    I have a cable modem with router wireless of my cable TV UPC provider called UPC Ubee EVW3226.

    I tried to connect the printer to the router using the WPS button and provide the password. In both cases, I have the same behavior.

    I have a dozen other wireless home devices that connect without problem to the router. But not the printer.

    Please let me know what other information will be good for you to solve the problem. Or, please provide a workaround solution.

    I found the solution:

    connect to your printer cable (you can use a direct eth between your computer and your printer cable), access the web interface and disable support IPv6 (let the IPv4 only verified): network > General > protocols > only IPv4 verified. Save and restart the printer.

    In 80% of cases, it will work on the wireless connection. For the other 20% when it does not work, try to assign a static IP address to your printer (network > Wireless > IPv4) in a second time. Take data from your router (IP, gateway, DNS).

  • HP Officejet Pro 8600 more e-All-in-One Printer - N911g

    Hello, I have just replaced my XL Black cartridge and was invited to share information with HP on my

    HP Officejet Pro 8600 more e-All-in-One Printer - N911g

    part of this info provide clarification to the HP of the actual amount of draws so I'm really curious to know what is the number of pages, I printed the

    does anyone know a way I can find this info please?

    Thank you

    Touch the front panel and use the arrow to the left if necessary to get to the home screen.  Then tap the droplets of four ink at the top right of the screen and press "Print report".    Articles 12-14 will be the total number of pages, pages in color and print pages without borders.

  • HP Officejet Pro 8600 more indicates 'missing or does not print head ". I followed HP 4 instruct. Help

    HP Officejet Pro 8600 more indicates 'missing or does not print head ". I did 4 HP instructions and now I'm #4: contact HP. I cleaned the heads, replaced the 4 cartridges, removed and replaced the unit restarted, everything. Now what?

    There is a document with measures to help address the missing or condition is not the print head.  This document can be found here.

    From your post, I understand that you did some the most of these steps, but run Solution 4: replace the print head.

    If you are still in warranty, HP can replace the printer/printhead without cost to you. I'll link the information to get in touch with them below. The link takes you to a form to fill out. Once you fill it and she is treated, it will give you the printers warranty information, a file number and the phone number to call.

    HP Technical Support call case form:

    https://h10025.www1.HP.com/ewfrf/wc/phoneInput?cc=us&DLC=en&LC=en&product=5061082

  • OfficeJet Pro 8600 more - won't print wireless

    Installed a new 8600 more printer.  To install it on my network.  My laptop sees the printer and scanning function will trigger and talk back to my laptop.  When I try to print, however, printing fails with the error "unable to communicate with printer."  Any ideas on how to solve this problem?

    Hi valledigna,

    Follow the steps below to uninstall and reinstall the printer.

    1. open Control Panel

    2. click on uninstall a program

    3 uninstall Officejet 8600 in the list

    4 restart your computer

    5. download and install the latest version of Adobe flash player

    http://www.Adobe.com/support/flashplayer/downloads.html

    6 download the drivers and full software functionality, and then reinstall the printer.

    http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=MP-97846-2 & CC = US & DLC = in & LC = on & os = 4063 & Product = 4323652 & sw_lang=.

Maybe you are looking for

  • Thunderbird 41.0 opens the default browser, but; does not open URLs

    This problem just started this week. links worked last week.I tried every difficulty anything remotely like what is online, all the stuff of network protocol, all add it on things, all the flaws of control... Simple problem. browser opens. URL clicke

  • What to do if...

    Your MAC to do this: The logo appears Progress bar makes about 1/4 of the way then freezes The screen turns white Then it stops and starts again

  • lack the sign in seal (ensuring the validity) for the Yahoo email login page

    The login-seal is an option that you generate for sign id and password for yahoo emails. It ensures the authenticity. It appears so, except on firefox. I'd appreciate your comments please.Thanks in advance...

  • get the world out of the watch dial time

    I use the standard watch face, but a time for Las Vegas keeps appearing at the top of the watch in small print.  I can't change that too, a city actually, I care.  I made changes in the Word timer on my watch and my iPhone, I even remove the cities o

  • Wifi functionality does not illuminate

    Hi, I have a probook 4430 s and last night the wifi was working fine when suddenly it turned off. It is not just my wifi it's any wifi at all. I keep trying to turn on the wireless feature, but the light on the button remains orange. I tried to do it