HP Officejet 6500 E709n wireless - Scan to computer printer - question

Similar Questions

• HP Officejet 6500 - E709n: power adapter for the HP Officejet 6500 - E709n wireless all-in-one printer

  I need a new power adapter for my HP Office 6500 - E709n.  Does it matter if I buy an adapter for a model E709a?  Will it work on the E709n?  The power adapter E709a looks identical in the photos.  Thank you.

  Hello

  In fact, they use the same adapter as shown:

  http://support.HP.com/au-en/document/c01636617

  Note: Make sure the 2 sections

  Models all in one HP Officejet 6500

  and

  Power specifications

  Kind regards.

• HP Officejet 6500 E709n wireless. Will not print Word documents or text edit.

  I'm connected wireless with an iMac Snow Leopard and MacAir 10.8.2, Mountain Lion 10.6.8.  I have used this system for a year, had no problems printing to date.  I am able to print a .jpg attachment but nothing else, we try to print (from computers) is printed.  I tried to print a Word document as well from a text edit page with no luck.  Two days ago, I was able to print from a Word document - nothing has been changed on the computer or the printer.  I am naïve.

  How is the printer connected?  Would it be a network, what router?  You've restarted the router by pulling its plug momentarily?  You've restarted the printer?

• Status.msi error with installation of the hp officejet 6500 E709n wireless

  It's frustrating.

  "I tried to install a full print driver software for my portable printer wireless hp officejet 6500 E709n and even if I can complete the process, I get this error message: the component you are trying to use is on a network unavailable resource.

  When I click 'OK', I get a "status: the path..." OK6500vE709_Full_14\setup\status\status.msi could not be found. »

  I then get a third message that appears each time you start to the top of my computer hp laptop dv6871us: "Please wait while Windows configures the status.  And... It's constantly repeated ad nauseam.

  How can I find the status.msi file and stop this endless loop of error messages?

  TX

  Yes, it's very good information.  Thank you to be thorough to me.  I actually had this happen to me personally on my Windows XP and printer Photosmart older (different error message but even constant pop up).  I could easily (but a lot of time, I might add) fix my problem of:

  1. uninstall the printer from Add/Remove programs.

  2. run cleaning disc of all programs > Accessories > system tools > disk cleanup.

  3 restart the PC.

  4 selection of a backup in CCleaner system option and then cleaning the registry using this tool. Click here and carefully read the reviews in CNET and opt to download the tool to see what I mean.

  5. restart the PC again.

  6. can download and install my printer on the site, but in your case, here are the drivers and the software feature full Officejet 6500 Wireless (the link is for the version of Windows 7 32-bit PC U.S.).

  This can become very difficult at times, so I want to provide this very comprehensive document from HP which covers your exact error message and their favorite not to try.  Mine are a little easier but a 'tad - little' more risky because I provided a link to a specific 3rd registry part cleaner that you use at your discretion (there are others out there).  I like it because I can back up my system first in the case where that something else has been removed should not have been.  I don't have that happen, fortunately.  Please read this document as well just to be on the safe side.  I'm here to help (do not do worse) so let me know if I need to explain something better, but I think that you have everything you need here to start.

  -Theresolution of the MSI boot errors-

  Let me know how it goes!

• OfficeJet 6500 has more - Scan-to-Computer tasks can be reorganized or renamed?

  I have a HP OfficeJet 6500 has more (E710n-z) and have implemented the Scan of the computer which works very well.

  When I turn on the scan-to-computer of the screen of the printer, there are six different choices for the analysis-'Save as PDF,' 'Save as JPEG,' etc..

  Three appear on the first screen, and I have to scroll down to get over the next three years.

  My Questions are:

  1. Is there a way to rearrange the scan tasks so that I can change which three appear on the first screen of the printer?
  2. Is there a way to change the names of the tasks of the computer analysis?

  I'm on a Mac running (OSX 10.8.2) Mountain Lion

  Sorry, there is not a way to change the order on the display of the scan task.

  Also, you cannot change the name of the actual analysis to the task of the computer. The only thing you can change is the name real analysis of the case, sorry.

• Need help: Officejet 6500 E709n wireless installation

  After a month of successful use of the Officejet 6500 from my laptop (running XP Professional SP 3) wireless I suddenlly lost the connection. I have recently added a new software. I couldn't add the printer because it is not visible, even by using its IP address) to attempt to reinstall the drivers. I tried the original CD and both the full and scan and print install download options, both hang on to 94% full.  I used the HP help nothing works cat. The HP network diagnostic utility sees the printer and the fine network and does not indicate any problem. Yet, no installation or the HP Print diagnostic utility programs can see the printer.  I tried each facility several times, including repeat downloads. I am able to access the wireless printer from a Vista desktop and another laptop running Windows 7. The printer (and functions) works very well.  However, the XP laptop is my machine of the company, and I need it to work.  Any suggestions? Is there a way to install all the drivers without all the other stuff?

  If printing is all you need, then I can help you.

  1. Go to the printers and Faxes folder, and click Add a printer.
  2. Now select "Locally connected printer" and UNCHECK "automatically detect the device.
  3. Now on the next screen, choose to create a TCP\IP port for the IP address of the printer.
  4. On the next screen, you will be asked to select the driver. Click on the 'Disk' button, then browse and select the file "autorun.inf" of the printer installation disc. Now the printer driver appears. Go ahead and select it.
  5. Complete the add a Printer Wizard and try printing.

  I would like to know if it works.

• Update of firmware for Officejet 6500 E709n Wireless does not work

  My OS is Win XP.  My printer keeps locking up.  I found a forum that says to use #6 when starting.  It works for a few hours, but it ends by crashes again once it goes into mode 'sleep'.  I found another blog that said to install the latest firmware.  I discover that I have firmware version 907AR, and HP web site has 935AR.  I downloaded the update and tried to install it.  He gets where extract the files, and then it throws the following error:

  Firmware download utility has encountered a problem and needs to close. We are sorry for the inconvenience.

  Has anyone else had the same problem?  I disabled the wireless printer and connected to my PC via USB to perform the installation.  I tried to save the firmware utility and running it from my hard drive and it works on the HP website with the same result.

  Never mind.  I followed the instructions by NOT using my wireless connection.  The printer connected to the USB port caused the installation fails.  When I ran the update, while the printer is connected wireless, the installation worked.  I just did the update, so I'll have to wait and see if it solves the problem with the gel printer.

• Can't scan with HP Officejet 6500 E709n Wireless

  I've used the scanner before without any problem. I have Windows Vista. I tried to scan yesterday and got the message: no scan options and refer to the documentation for the device. I ran the diagnostic analysis, HP Scanner TWAIN of the scanner did not and then the HP scanning application no longer works and I got the message to remove my printer software and reinstall. I did and received this message: the old version of HPSSupply cannot be deleted contact technical support. Fatal error and MSI. SUBCOMMITTEE. I was initially using the wireless printer. Since yesterday, I reinstalled the software twice and tried both wireless and USB cable. No luck with either.

  P.S. I tried reinstalling again and got another fatal error message, this time with a number: 1714. Then I looked at the HP site and found the message below. The problem is that I have Vista, not XP. Now what? Thanks in advance for any help.

  Question

  Hello

  Step 1: HP has designed a quick and easy tool that diagnoses and solves many problems of printing, scanning and connectivity: The HP Print and Scan doctor. HP recommend you to download and install Print and scan doctor no matter what time you need to solve a problem with your HP printer from the link below.

  I would like to know what are the errors you receive?

  http://www.HP.com/go/tools

  Second stage: Review the Message 87 of 302 on wire http://h30434.www3.hp.com/t5/Scanning-Faxing-and-Copying/HP-6500-Wireless-does-not-scan/m-p/1220683#M26284

• HP Officejet 6500 E709n Wireless printer is not printing yellow exclamation cannot use Setup

  Don't know what the problem with my printer when commissioning wireless light comes on even if not connected... Amber Exclamation mark still on... cannot print have tried factory reset... and other resets... nothing seems to work... I don't know where to go from here...

  Hi @Switz27 and Happy Halloween!

  I know not what you reset performed, but there may be one left for you to try.

  I'll send you a PM (private Message), but before I do, please see the HP Privacy Statement.

  This privacy statement informs you of our privacy practices and the choices you can make about the way information about you and your online activity is collected and how that information is used. This statement is available on our homepage at the bottom of each web page of HP and HP.com.

  There are a growing number of messages in this forum and elsewhere in the internet with the steps to do a reset on different printers.  Reset to will sometimes fix problems, so resetting is not the issue.

  A few resets require you to enter key combinations to open special menus on your printer that you were supposed to never access.  These special menus are used by developers and staff support for debugging of problems, but they are not intended for inexperienced users and can have unexpected results.  A wrong button push and you might no longer have a printer, but rather an expensive paper weight.  On top of that, if you happen to the 'brick' the printer in this way, it is considered as customer induced damage and voids the warranty automatically. These resets are only intended to be distributed and used as a last resort and under the direct instruction of a representative of the HP technical support. They should not be made lightly!

  Reset the printer: what you need to know

  

• OfficeJet 6500 E709n Wireless - sensor defective yellow cartridge - how to print black only?

  Product is 5 years.  Error message indicates that the yellow cartridge seems to be missing.  Cannot be resolved after several cleanings of sensor and the sensor window. Powered / disable several times including corkscrew. A tried a new yellow cartridge (not a recharged one used).  Shot all the cartridges, cleaned, open/closed status of the printer, lifted/lowered the gray lever of the print head.  Could not find a way to print in black only if possible.  The cost of a new printer is roughly the same Technical Support help (out of warranty).  Any thoughts on how to fix (other than buying a new printer - unless it's time)?  Thank you in advance.

  Figured it out.  I missed some parts of the print head cleaning.  Solved.

• My Officejet 6500 E709n Wireless does not print "Black".

  I replaced the cartridges, run the printhead cleaner, run the alignment, still will not print black.

  HI - have a look at this post.  Instructions solved the problem at least one other customer having a similar problem.

  Hope that helps.

• OfficeJet 6500 E709n: Unable to find network printer

  Accidentally deleted woman printer of his laptop computer.  Try to reinstall.  Printer is connected in wired ethernet.

  Printer connects to another computer very well. (occurs regularly as the printer automagically to uninstall this other computer)

  -Ran "Add a printer" with laptop connected to wifi.  No printer found.

  -J' tried Advanced, enter the IP address and HPDF598E. No printer found.

  -Tried the computer connection laptop wired ethernet. No printer found.

  -Tried to enter the IP address again.  No printer found.

  -Tried "add a printer" running as an administrator.  No printer found.

  -Opening web page on printer by typing the IP address.  Can see just fine printer to laptop via wifi or cable.

  Performed various uninstall, reinstall, restarting the laptop and printer power cycle throughout the connection attempt.

  Any ideas how to get the software to see the printer?

  Hi @megabite,

  According your description and what you've tried, I think that the question has something to do with something on the computer, not the printer or the network. We will try a few things to try to identify the problem.

  Let's start with a clean boot.

  1. Enter in the right edge of the screen and then click on Search. Or, if you use a mouse, point to the corner bottom right of the screen, then click on Search.
  2. Type msconfig in the search box and then press or click on msconfig.
  3. On the Services of the System Configuration dialog tab, tap or click to select the hide all Microsoft services check box, and then press or click disable all.
     
  4. Under the Startup of the System Configuration dialog tab, tap or click Open the Task Manager.
  5. The tab to Start in the Manager of tasks, for each startup item, select the item, and then click disable.
  6. Close the Task Manager.
  7. Under the boot of the System Configuration dialog box tab, press or click OK, and then restart the computer.

  * When you are finished troubleshooting, follow these steps to reset the computer to start normally.

  Windows 8.1 and Windows 8

• My officejet 6500 e709n makes the sound of printing but nothing comes out on the page. thoughts?

  I replaced the ink cartridges, cleaned the print head, turned switch, unplugged for a reset and reinstalled on my computer (Mac OSX 10.5.8).

  Nothing seems to be a problem with the printer visually - not clear jams oddities in the internal mechanisms.  He just "pretended" to print.

  Some error messages I received early in the troubleshooting process has suggested that ink cartridges are not compatible with the device (they are) and a warning to use the power button before turning off the power.

  There are more messages on the screen - complete just the icons of ink.  Everything seems normal.

  Thanks for your time!

  Try the steps in this troubleshooting page.

• HP OfficeJet 6500 E709n: Strange characters in the printer on Windows 8.1 preferences page

  When I use the printer from native Windows applications such as Notepad, Paint, and Wordpad etc., strange Chinese characters appear in the printer preferences window and no option selection is visible or available.   -No error message.   -J' I disable the device and re-installed the latest HP driver software.   -L' unit operate normally, except for the problem of page preferably.

  Hi @JSvWyk,

  Am I assume it looks something like this?

  

  You may need to change the language of your operating system. Research I've done, it seems that some languages, such as English (United Kingdom), cause this hiccup. Please check or change your language to English ( States- United).

  To check or change your current settings, go to control panel and select clock, language and region, and then select change regions. On the Format tab, select English (United States). On the location tab you have the United States in the current location of falling down and then select apply.

  Please let me know if I indeed understood the question correctly, and if the problem is now resolved. Thank you.

• OfficeJet 6500 E709n: New portable 10 Windows cannot print on Officejet 6500 E709n

  Just bought a Dell Inspiron with Windows 64-bit 10.  Cannot do print on my Officejet 6500 E709n.

  * I can print to this printer even using another computer Dell laptop running Windows 7

  * I have installed and uninstalled the printer a couple of different

  1. With the help of the HP Officejet Full Feature software and driver http://support.hp.com/us-en/drivers/selfservice/HP-Officejet-6500-All-in-One-Printer-series---E709/3...
  2. Using a detection printer 10 Windows "add a printer".

  The results are the same.

  • Never test pages print (no reaction from the printer at all)
  • Printing and scanning doctor detects the printer and all the controls are ok.  Test page does not work, but it will print an internal test page

  Another symptom, if I right click on the printer icon and select "Printer Preferences", I get a windows error window:

  "Address of the 0x5d4982eb function caused a protection fault.  (exception code 0 x 0000005)  Some or all property pages are not displayed. »

  Hi @jhrhilltop,

  Welcome to the Forums of HP Support! I read your post and see that you cannot print after you install the printer on Windows 10. I will definitely do my best to help you. If this helps you to find a solution, please click on the button "Accept as Solution" down below in this message. If you want to say thanks for my effort to help, click on the 'Thumbs Up' to give me a Kudos.

  It does not resemble drivers for the printer installed correctly.

  Run all the updates of Windows on the computer.

  I would say to uninstall the printer software. Unlock the hidden administrator account, then install the printer on this account:

  Note: Do not connect the USB cable until you are prompted during the installation.
  Go to your Start menu and in the box "search programs and files", type CMD.
  CMD will fill as an option to search above, just right-click on it and "run as Administrator".
  Once opens in CMD (command prompt), type net user administrator / Active: Yes and press ENTER.
  Then, close CMD and then restart your computer.
  When your computer is on the newspaper in the new account which should show. It will be called Administrator and will not have a password on it.
  If your computer automatically connects to your account after reboot than to go to your Start menu, click the arrow next to 'shutdown' and choose 'change user '. Now log on to the administrator account, that we have just released.
  Under the administrator account, install the printer software.
  Test the printer.
  To disable the Admin account start at step 1 and type net user administrator / active: No..

  Test the printer.

  Please let me know the result and if there is anything else I can help you. Thank you.