HP Officejet 6500 Wireless all: Scanner has stopped working

Similar Questions

• OfficeJet 6700 Premium: Officejet 6700 the computer scanner has stopped working

  My scan of the computer stopped working with my PC HP 10 Windows, I ran doctor scan it says driver error and can not solve the problem, but I seem to have the latest version of the driver and the fax does not either, so only print work. All is connected by ethernet network, but I have tried with a USB Wi - Fi and always the same, any ideas as this has worked successfully for months on windows 10.

  Hello @Paul95,

  It is a great place to get help! I read your post and see that you can not scan from the printer to the computer. The PSDR shows a driver error. I want to help you solve this problem.

  If you cannot scan from the computer software, then you will not be able to scan from the printer to the computer. Most likely the scan drivers are not installed properly or are corrupt.

  You can scan from the HP scanning software?

  Try the procedure described in this document to see if it will help: after Windows 10 Upgrade, printer will not scan. Do not take into account the title. You can skip the steps that you have already tried.

  I would like to know if the scanning application works.

  You can click on the "accept as a Solution" If the problem is resolved and the 'Thumbs Up' for my effort. Please hold me. Good luck!

• HP Photosmart Wireless B109n-z: my scanner has stopped working

  My printer and copier work ok but the scanner has stopped working and gives me an error message-

  "The analysis cannot because another program or computer using the HP netwoked imaging device. Try again later.

  The device is not on a network, and there is no other users outside of myself using my laptop.

  Hello

  You can try this link?

  http://support.HP.com/us-en/drivers/selfservice/HP-Photosmart-wireless-all-in-one-printer-series-B109/3794623/model/3794624#Z7_3054ICK0K8UDA0AQC11TA930C7

  Thank you.

• MX922 Scanner has stopped working all of a sudden.

  I have a Canon PIXMA MX-922 and the scanner has stopped working (right in the middle of something important). It worked fine for two years, now it's kaput. It prints well on USB.

  I googled this and see a lot of similar questions but nothing I tried works. I have re-installed the software from scratch, and the printer works again, but not the scanner.

  When I run the scan of the machine, it says "Processing, please wait momentarily", then simply, it stops and distillers he make fun of me...

  When I go to the computer, it starts up fine, sucking the document in the scanner, then it breaks down.

  

  

  Hi williampeck1958,

  To see if the scanner can scan all of the computer, I would like you try and scan from the Microsoft Paint program.  To try to scan from Microsoft Paint, follow these steps:

  1. go into your START Menu, select all PROGRAMS, then ACCESSORIES, then MICROSOFT PAINT.

  2. Once inside the paint, in the upper left corner you will see a blue square. Please click on this and select FROM SCANNER or DIGITAL camera. A window will appear asking you what device you want to use. Please select the PIXMA MX922, and then press the OK button.

  3. in the next window, you must have the ability to select a type of document; Please select one, and then press the SCAN in window.

  Have you been able to properly analyze using Microsoft Paint?  In addition, you are able to make a copy directly from the unit successfully?

  If it is a question of time-sensitive, additional support options are available to contact us.

• HP 5524: Scanner has stopped working hp5524.

  My scanner has stopped working and I get the message, the Communication cannot be established.

  The printer works fine on wireless with a good connection.

  The hp scan doctor can not solve the problem.

  I tried turning off the router and the pc and the printer and reboot, several times without any modification.

  Also tried connecting the printer via USB, still nothing.

  I don't want to buy a new printer to see I have the same problem.

  Happy to help you.

• HP Envy 5530: My scanner has stopped working

  My scanner has stopped working - it prints ok. I tried print & scan doctor to solve the problem but so far no luck. When conducting diagnostic tests, it gets stuck on check disk for hours and is unable to perform the full audit. I tried everything without success. Some of the messages I got: communication scanner cannot be established - inaccessible scanner. I tried enabling, but no effect. Please help me I am desperate.

  My scanner has stopped working

• LaseJet M1132 MFP scanner has stopped working.

  LaseJet M1132 MFP scanner has stopped working (printing and copying are OK). HPPSDr.exe starts the test and repair, but it will not end. Reinstalling the HP software did not help. Windows XP SP3.

  Solved. I've replaced the USB cable by a new one, such as recommended by others.

• My 5 Neat scanner has stopped working, it has worked 3 days ago - I reinstalled 3 x so far

  My 5 Neat scanner has stopped working, it has worked 3 days ago - I reinstalled 3 x up - went to uninstal and everything that I had the option repair.

  I'm stumped - ideas out there?

  Contact neat 5 support.

• OfficeJet J6480 all-in-One, scanner has stopped working

  I'm on OS 10.6.2 on an iMac Intel Core Duo.  I got a J6480 Officejet for about a year.  The scanner worked fine when I bought it first, but now it has stopped working.  If I use the HP software, I get a message "an unknown error has occurred."  If I try to scan using the buttons on the printer, I get an error of "No scan option available" on the screen.  I already tried to uninstall and reinstall the software and it did not work (although before the reinstall, the error messages comes to say, ' no scanner available, "so I guess it's an improvement?).

  I do not use the scanner a lot, but my guess, is that he has stopped working some time after I've upgraded to Snow Leopard.  I was regularly running Leopard when I bought the machine and first used the scanner.  I see a lot of messages on the scanner not working not not with Windows, but I have not found anything with Mac in particular.

  Help?

  OK, one more not - we will reset the printing system:

  -Sys Prefs, Print & Fax
  -Right (Ctrl) click the box of the print queue and select Reset Printing System.
  -Select the sign + to add again. Search for the printer, select it, and wait until the button 'Add' becomes available. Until it clicks.

• HP OfficeJet 6500 Wireless - bug Scanner driver - only on Windows 7 platform!

  Date:
  October 29, 2010, Roende, Denmark.

  TO:
  Hewlett-Packard
  Support / Department printer driver.

  From:
  Jesper Simonsen
  Denmark.

  Hello Hewlett-Packard

  I have an error message you bringing on the
  HP OfficeJet 6500 Wireless
  Driver for Windows 7 printer platform.

  This bug only exists on the Windows 7 platform
  and not on Windows XP.

  I was hired to install the
  HP OfficeJet 6500 Wireless yesterday.
  I have installation, installed, set up the printer.
  I configured the printer to run
  Wireless network with gateway router
  SSID and WPA key and it went smoothly.
  I installed the printer for
  address fixed LAN IP 192.168.1.197
  and I configured the gateway routers
  DHCP pool to go until 192.168.1.195
  for not to disclose the IP address of the printer.

  On a new laptop Lenovo running Windows XP
  running on the same wireless network that I installed
  software of the printer from Windows XP/Vista driver disk provided.
  It worked fine with functions of printer and scanner.
  I could also press the Scan button the
  the printer front panel and choose the laptop
  and then the printer starts and automatically starts the scanner
  software upward on the laptop. Thus, it works beautifully.

  So I should install the printer on your desktop.
  A new Lenovo desktop computer running Windows 7 32 bit.
  This desktop computer also works on the same wireless network.
  I installed the driver from the disk Windows 7driver to the address provided.
  Installation may well see the printer on the wireless network.
  I might send a print job to the printer.
  But it does not scan.

  I have tried both:

  -To start a computer scan job.

  The scanner respond briefly to run the scanner carriage
  down on where it should begin to start to
  to scan, then it stopped all communication.
  He sits for a while and then finally there will be an error message
  No communication to the scanner, which had the error code:

  4, [(2,7,80040007), (3,7,0)]

  -J' also tried to press the "Scan" button
  on the front panel on the printer and then go through
  options that are displayed on the screen on the front printers.

  It said on the screen before she had no scan options.
  On the computer, it showed a message
  We should update the list of LCD on the screen of the printer.

  I did it with the help of the HP solution center text.
  I found where I could update the scan job type options.
  I could add/remove them. Then, I sent to the printer.
  Analytical work was then on the display of fine printers.
  The same error: Scanner carriage moves down to the other end
  the scanner then stops all communications from there.

  I tried to google the number of problem and error.
  I found several other users with the same problem we had.
  I could see a webpage that people could download
  the latest printer driver, then it should resolve itself.

  The provided disks were
  -Disk with drivers for Windows XP and Vista
  -Disk with drivers for Windows 7 (32 and 64 bit)

  The drive for Windows 7 has been driver version 13.0.0
  and I could download the driver 140.0 version (English)
  (I guess that's v.14.0)

  So I downloaded this driver package.
  (I downloaded it 28 October 2010)

  First of all, I uninstalled all THE HP drivers and software on Windows 7
  and then did a reboot of Windows 7.

  Then I started to install the new version 14 of the pilot.
  The installation went without problems.
  But this driver has the same BUG than the previous driver.

  I went to the new driver HP Web site
  and downloaded all the updates that were available and
  installed to them all and still no luck with the problem of scanning.

  I had Windows Firewall turned off completely all the time.
  It is therefore not the firewall blocking anything.
  The connection to the printer is good because print jobs worked well all the time.

  Then I would try to connect the printer with USB cable
  the computer fixed Lenovo, to see if there was a difference.
  I have re-set up the printer so that I got the printer available
  by USB connection.
  It prints very well and can scan fine if
  I put the computer starting a scan job.

  But if I pressed the "Scan" button on the front panel
  then came the SAME error as before.
  When in the list of type of scan on the front panel of the printer
  has been chosen and then began the cariage scanners
  towards the other end of the scanner.
  Then he started by the scanner to the computer software
  Then, when we pressed either the scanning/Scan now on the front panel
  on the printer OR we pressed the scan button to start the scanner software
  on the computer. Then the scanner stopped after awhile and communication
  then the error message appears again.

  The wireless network is running a
  D - Link router with wireless access point.
  SSID: alsikkevej10 (not hidden, no special characters)
  Encryption: WPA - PSK (WPA1-PSK/TKIP)
  Shared key: xxxxxxxx (with no special characters)

  CONCLUSION:
  This means that the error (bug) persists in HP
  Driver software the feature scanner for Windows 7 platform.

  When I tested it, I had the Windows Firewall turns off completely.
  It's had that nothing blocked in this way.
  Wireless worked well because we could always print.

  The Lenovo laptop could always
  printing AND scanning over the wireless connection

  Both analyze the types of employment has worked on the laptop:
  -A started from the "Scan" button on the front panel of the printer.
  -Started from the scanner on laptop computer software.

  So scan works fine on Windows XP but NOT on Windows 7 platform.

  I would like to hear from you when you have solved the problem,
  so that we can it works as it should do.

  HP, please respond to an e-mail.

  Sincerely,
  Graphics & new media designer

  Jesper Simonsen

  [text removed for privacy]

  I talked to technical support. I mentioned a level 2 technician. He told me that most of these problems is caused by a bad operating system and reinstalling it would do. I got back up, restore the operating system, restore the data and reinstall all my programs, but he was right about the problem to solve. Seems a lot of work to get the scanner to work, but my computer is slow and refreshing it anyway. Moreover, the level 2 technician also said that they would recommend to reinstall the OS every 6 months. Not so sure I want to spend hours 4 or more on this process, but my computer works certainly better!

  jandrgold

• HP Officejet 6500 Wireless all-in-One Printer - E709n does not print

  My HP Officejet 6500 Wireless only all-in-One does not print from my main computer. I can scan from this computer and print them from others. I uninstalled and reinstalled the software and drivers, restarted the queue, run the scan doctor and get error error unknown/deviece.  I have disabled the firewall unplugged abd and repluged the power to the printer.

  Any thoughts?

  I have messed with my firewall and had it work. Still not sure what I did but it resets something. Thanks for the help.

• 2.4 GHz HP wireless optical mouse has stopped working

  My wireless mouse has stopped working. I use it on a laptop Windows 8. I used this mouse wireless with this computer for almost a year. All of a sudden it just stopped working. I changed the batteries, so it wasn't the problem. I have uninstalled and reinstalled software and that did not work. Is there anything else I can try before I buy a new mouse? Product # is WT564A.  The model # is FHA-3510. The S/N IS CN1 [personal information]. Product #, model # and s/n is not the computer mouse. Any help would be greatly appreciated.

  Hey there eunash,

  I found three links that could help you, please take a look and try some of the steps:

  Keyboard and wireless mouse troubleshooting

  Mouse, touchpad and keyboard with Windows problems

  .. .and finally, check out the Merita post on this thread, they had some good ideas while explaining what might be going on: http://h30434.www3.hp.com/t5/Other-HP-Consumer-Products-and-Technologies/HP-FHA-3510-mouse-trouble/m-p/2666383/highlight/true#M10473

• OfficeJet Pro 8500 has more: Scanner has stopped working

  Scanner no longer works. Printer turned on and outside, missed scan printer Dr, which did not work, pulled the power cord, checked the wireless network, turn off router then return. Never had this much trouble getting scanner to work. Ideas.

  @Joe5

  If you did not, please remove the existing printer software > restart > install a new copy of the software full functionality.

  Assuming the printer is functional, connected, and that print of Diagnostics shows no errors, then consider / try one of the following Scan Options.

  Printer

  HP Officejet Pro 8500 has more e-All-in-One Printer - A910g

  Full software features:

  File name: OJ8500_A910_1315 - 1.exe

• HP Officejet 6500 wireless all: CD software disc supplied with my printer

  There was a CD that came with my printer. It contained software that I could use to copy and make pdf files and some other items. I moved and lost the CD and recently had to reformat my PC. I would like to be able to download the same info CD or buy the disc. Any solution please?

  Las Vegas, Bigjohn701

  Hello

  What is the product/model of your HP Officejet 6500 (E709 something). You can go on its support site to download the software and driver. The CD can be already updated. The following link is for a model/product E709a:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?CC=au&LC=en&product=3795314

  Kind regards.

• HP Officejet 6500 Wireless all-in - One Printer - E709n - locked up

  I searched the Forum but could not find a solution to my problem.

  My printer is locked and does not go in mode 'sleep'.  The power button does not work and is still on.  I'm unable to print, but however I am able to receive faxes.  The only way I can cut off is by unplugging the power cord, but when he doesn't go to the top it gives me a warning about disconnecting that way may damage the printer and to use the power button and it hangs again.

  Help, please.

  Thank you

  •´`•. (*•.¸(`•.¸ ¸.•´)¸.•*).•´`•»
  «•´¨*•.¸¸. ADRIENNE. ¸¸. • * ¨• »
  «•´`•. (¸.•´(¸.•* *•.¸)`•.¸).•´`•»

  Reset the printer by holding the # and 6 keys while turning the power on.

  It sounds dead for me, but it may work.  If it isn't, try # and 9 keys.