HP Officejet 7610 Scan

Similar Questions

• Does an officejet 7610 scanning slides

  Hello

  Does an officejet 7610 scanning slides Thank you.

  Joe

  Hello

  Unfortunately no, it can't scan slides and negatives. The following link shows its specifications.

  http://WWW8.HP.com/au/en/products/printers/product-detail.html?OID=5153791#! tab = specifications

  Kind regards.

• HP Officejet 7610: Scan of the computer cannot be activated or scan and combine them into a single pdf document.

  I've recently updated to macOS Sierra 10.12 and scanning to HP computer software cannot be located when I open the HP utility.

  I can't find a further recommended HP software for my device other than El captain in operating system online.

  If I try to scan through preferences systems for printers and Scanners I can open the scanner, but I can't create a PDF combining into one document - it cancels the procedure after about 2 pages!

  The scan HP Destinations 'PDF for Adobe Reader' is red 'could not locate the target application that might have removed or uninstalled. File format = "PDF".

  How can I get that back?

  Thank you

  Hi @JOGL,

  Thank you for joining the HP Forums!

  I understand that computer analysis can not be activated as well as the scan and combine them into a single pdf document. With your printer HP Officejet 7610. I am pleased to see that for you!

  At this time for this model. There is no software and drivers for Mac OS X 10.12 again, given that the operating system has just been launched, it could take some time. For the time being, you can try to use HP Easy Scan to see if that can meet your scanning preferences. In otherwise, all we can do is wait for the software and drivers to be released.

  If you are unable to reach a resolution, please click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

  Thanks for posting and have a nice day!

• OfficeJet 7610: upgrade to Win10, no longer have the option of scanning in the HP software.

  I upgraded to Win10 and had to reinstall my HP software.  Now the HP software shows that the printer.  I don't have the option to scan or fax from the HP software.   Ran the HPDoctor and said msg that some updates have been made to correct the scanner.  Ran the scan test and got a msg that the scanner was not available, but I was able to scan from the software Windows FAX/scan very well.  Help!  I prefer to use the HP software for scanning.

  Hello

  Thank you for using the forum.

  Have your downloaded and installed the full features software?

  Here is the link for your convenience;

  http://support.HP.com/us-en/drivers/selfservice/HP-OfficeJet-7610-wide-format-e-all-in-one-series/5153788/model/5153789#Z7_3054ICK0K8UDA0AQC11TA930C7

  Once you have downloaded and installed the software, FULL of features, you should be able to print and scan.

  Hope that helps.

  Please click on "Bravo Thumbs up" as an encouragement and "Accept as solution" if it helped to solve your problem.

• Example: Pavilion 7610: scanning HP 7610 for MAC

  Back to HP 7610 scan 11 x 17.  I have a MAC with OS X El Capitan 10.11.2.  I used the printer including widely w / HP AirPrint.  Scan was fine.  Unit will not scan 11 x 17.  It goes through the movements but no results of the final product.  All available through Apple updates are always incorporated (phone company).

  Great machine, otherwise it's a bit slow.

  Hi @Durag,

  Welcome to the HP Forums!

  I noticed that you try to scan your Mac with your HP 7610 11 x 17 printer. I'm happy to help you!

  I guess it's a HP Officejet 7610, if the case, please let me know what kind of printer you have. To find product/model number of your printer follow the instructions in this link. Find your model number of the HP product.

  What happens if you try scanning without HP software? Please see this post, iMac OS X 10.9.3 scan driver for HP OfficeJet Pro 8500 a A910a to iMac seems to not exist, as these options will work for your printer, on this operating system.

  If this, or one of the posts on this thread, helped you to solve the problem, please click 'Accept as Solution' said post. To show you 'like', or that they are grateful for my post, please click the thumbs upwards below. If there is anything else I can do to help, please don't forget to let me know!

  I hope hear from you soon!

• 7610: print envelope A10 from one Android device on printer Officejet 7610

  HP Printing Service decision-making in available on Google Android game seems to settle and open normally.

  The printer is a wireless HP Officejet 7610 large Format printer.

  After an address in Word (on Android) and or Google Docs, try to print an A10 wireless phone

  in case of failure.

  A10 is available in the printer plug a properties box. Checked.

  However, when you use the actual Print Setup dialog box, the drop-down menu to select the paper shows only letter and A4.

  Tried by selecting different combinations of size "checked" in the sheet in the Properties dialog box. could not get the A10 to appear in the printer setup menu.

  A10 was also selected in the properties of real printer on the laptop.

  Hello @ibjman,

  Welcome to the Forums of HP's Support. I understand that you have a hard time, printing an envelope of A10 from your Android device. I would like to help.

  I couldn't find a reason for the software to reject the size of the A10. I went another way and looked at the material instead.

  You can find the following link handy. Specifications for the HP Officejet 7610 and 7612 large Format e-All-in-One Series (H912)

  I went through the list of supported paper sizes. The Officejet 7610 does not support size A10 envelopes.

  The application supports the paper size. Given that the printer does not work it only allows you to print with this size. This isn't a good answer, but it is a solution to the question: why you can't print in cell A10. Or a Kudos. Let me a Kudos.

  I hope this helps. If you need other assistance please let me know.

• OfficeJet 7610 large format: Advanced color settings

  Bought an Officejet 7610 wide format e-all-in-one more than 1 year ago.  Finally put in place.  Am I correct, that there is no advanced settings of color as my old Photosmart C6280 - brightness, saturation, hue, and settings for each color? Is this what current HP - Photosmart line?

  Hi @jyz2100,

  Although the advanced color settings may be different, there are options with software and print, dialog box that you can modify. I wonder if you might find the following useful information:

  The default sRGB mode

  The default sRGB color space is the most common configuration for print jobs. As mentioned, most of the images are sRGB and sRGB offers color high quality automatic without user intervention. When sRGB is selected, the driver controls the color management. Color management should not be attempted with ICC profiles, while the pilot is set to sRGB mode. This will lead to generally low color fidelity.

• OfficeJet 7610: B Super impression on OJ7610 in Yosemite/Chrome

  Mac Mini

  Yosemite OS10.10.5

  HP Officejet 7610

  Paper size difference.  When copying, the selection for Super B 13 x 19 paper is not present.  Auto does not work.  New driver [Yosemite] installed.  13 x 19 in default system preferences/printers. The only reason why I bought this printer is very frustrating as the ability to print this size!

  Thank you X-23.  I was afraid of that.  Not trying to digitize 13 x 19, as I know, it cannot do this but hope that I was able to custom resize 13 x 19 a smaller original.  Seems that the software is the culprit.  Not resolved but resolved as much as possible.  Yet X-23 thank you for your kind cooperation.

• HP Officejet 7610: He do not line up, regardless of how many times I try!

  Hello

  Since I bought the printer and installed, it has never been aligned. Right now, it's an extremely expensive and large Clipboard.

  I tried the alignment troubleshooting, print many pages of alignment, etc. - each time the same result. It is said to be 'successful', but the impression is even more page... diagonally off course.

  Already now and then he said 'bad size of the loaded papr' - when clearly I am loading A4 paper in the bins of size A4 setting. So it is not sensible.

  Can anyone help?

  Thank you.

  Hello @plumbe,

  Welcome to the Forums of HP Support! I see that you are running in print quality problems on your HP Officejet 7610, although alignment says he's successful printing is all over the page.

  1. are you able to make a copy of the façade, or it comes out with the same flaws?

  I see that you have exhausted the here listed troubleshooting steps: solve for the HP Officejet 7610 Grand Format Print quality problems without success.

  Please contact our technical support at the 800-474-6836 as it may be material. If you do not live in the United States / Canada region, please click the link below to get help from your region number.

  http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

  I hope this helps!

  Thank you

• OfficeJet 7610:7610

  Hi, I'm from Palembang, North Sumatra, Indonesia.

  My printer HP OfficeJet 7610 was broken, it can not load paper. I bought in an authorized service center. They said, that it cannot be repaired, because the replacement part for the part that is broken is not available.  They do not find a part number for it to the list of spare parts.

  So they tell me that it can not be repaired. I must buy a new one.

  Can you tell me - is it true?

  How HP does not support replacement spare parts for the part that can be broken.

  This is a printer end way, not a low end printer.

  Does anyone have a solution for this?

  Hello @riang16

  I brought your question to the attention of a team within HP. They are likely to ask for information from you to get your information or product serial number. Please search for a private message from a contact HP identified. Also, remember not to publicly post information and series numbers.

  If you are unfamiliar with works as a private of the Forum messages, please visit http://hp.care/2cyjiuD for more information.

• Need print drivers for an OfficeJet 7610 for R2 in Windows 2008 Server

  I need print drivers for an OfficeJet 7610 for R2 in Windows 2008 Server.  The pilot to feel that you get when download you from hp.com are for XP and Vista Window7.  The error message says I have to update my Windows 2008 Server R2 to XP, Windows7 and Vista to install drivers.  I called HP and have a case number.  All I want is a link to the REAL Windows 2008 Server R2 Enterprise OfficeJet 7610 Print Drviers in x 86 and x 64 bit versions.  Is there someone who can help?

  Hi Print_Madman! : you might have more luck going Buisiness & reierate Forum this question out there

  He is the owner of the House section

  Good luck

  hope this helps you

  spacechild

• HP Officejet 7610: Just bought and implemented - transport of ink stuck closed

  Just purchased HP Officejet 7612 last night. Has crossed the entire Assembly process - with horrible instructions anywhere.

  Is the facility only to find out that the transport is stuck in the closed position.  3 of the report 4 ink carts that they are not installed correectly causing the tostuck head of print/transport in closed position.

  I have $83.00 applies ink to replace the carts of configuration but are unable to them.  I tried all the troubleshooting tips, and they talk only about paper jams.

  Anyone ever experience?

  Hello @JMCarrigan and welcome to the Forums of HP, I hope you enjoy your experience!

  I see that you are having problems of transport. I would like to help!

  I would recommend starting with a power reset.  Unplug the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug back in the printer. Make sure that you connect the printer directly to a wall outlet. Make sure to bypass any surge protector or power bar.

  I suggest following the procedure described in this document:

  A Message appears 'Transport Jam' for HP Officejet 7610 large Format e-All-in-One Printer Series (H912)

  Good luck and please let me know the results of your troubleshooting operations. Thanks for posting on the HP Forums!

• OfficeJet 8600: scan of the computer does not work on mac officejet yosemite 8600

  I tried the fix in the forum for the officejet which will not sweep with yosemite.    I used the driver for 8600 officejet Yosemite.   I restarted the router, computer and printer.  I also struggle with the print function.  Every day, I have to turn off the printer market to find the computer.  I have a macbook pro computer running OS X 10.10.2

  It's very frustrating!  Help, please!  Thank you!!

  Hey there @texasjane!

  Thanks for posting on the HP Forums!

  I should be able to provide assistance with the issue between you and your Officejet 8600 scan Mac OS X 10.10. You mentioned that you have already installed the full features of HP Officejet 8600 software but still have no success.  Your also get some printing problems.  The Mac indicates that the printer is offline when you try to print?

  Its possible that an update is available for the Mac on the HP software.  I recommend checking the Mac to make sure it's his print more up-to-date and scan drivers.  To check the updates simply click the Apple icon in the upper left corner of the screen.  Once your in the Apple menu, select App Store.  Within the App Store, you can click updates at the top of the window.  Check and install the HP updates that may be available.

  I suggest try to analyze using one of the construction in Mac as Capture of Image applications.  If there are problems with the HP on Mac 10.10 software then you may be able to bypass them with Image capture.  Image capture may be located in your Applications folder on a Mac.  You can also find it by linking the Image Capture in the Mac spotlight.  Spotlight is the magnifying glass at the top right of the screen.

  If please, after back and let me know how it goes!

  I hope this has been helpful!

• HP Officejet 7610: HP Officejet 7610

  HP Officejet 7610: I can't select "Edge to edge" or 'A3 low margin' or same A4 and 'Paper' together since my computer crashed and I restored. Despite download of new dishes soft and firm. It uses "photographic" only parameters. This makes the toner appear through the paper and use the toner. I even deleted the latest version of the software and re-installed from the original disc. Can anyone suggest a solution?

  Hello Mel, I hope you had a good weekend!

  I recommend to install the following software:

  HP Officejet 7610 series full feature software and drivers

  As well as this firmware update:

  HP Officejet Firmware

  Thank you!

• OfficeJet 7610 XP X 64 Driver

  Trying to find a driver for HP OfficeJet 7610 XP 64-bit.

  Here is a link that will help you download the drivers and software.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-115382-1&cc=us&DLC=en&LC=en&OS=228&product=5327474&sw_lang=