HP officejet E609n

Similar Questions

• HP Officejet 6000 E609n series 'disorder with detected printer.

  Original title - HP Officejet 6000 E609n series

  Printer does not print.  Connected to the network - ok.  Troubleshooting not detected any specific error but listed "trouble with printer detected" at top of list.  Printer agrees and sends the sheet of paper through but it comes out of the Virgin.  This s the only printer on the network and is set as the default printer.

  Hello

  1 did you changes to the computer before the show?

  2. what operating system you have installed in the computer?

  The instructions will help you identify and fix common printer problems in Windows, including print errors, print spooler errors, and other issues that could prevent you from printing.

  Method 1: Run the fixit:

  Diagnose and automatically fix problems printing and printer

  http://support.Microsoft.com/mats/printing_problems/

  Method 2: R the print spooler service and delete the print queue 

  Start the print spooler service in the Services console

  1. click on Start, clickrun, type services.mscand click OK.

  2. right click on the print spooler service and then clickstop.

  3. right click on the print spooler service and then clickStart.

  Start the spooler service for printing at the command prompt

  1. click on Start, clickrun, type cmdand then click OK.

  2 type the following commands at the command prompt:

  net stop spooler
  net start spooler
  Output

  Note: Press ENTER after each command line.

  Cancel printing

  http://Windows.Microsoft.com/en-us/Windows7/view-pause-or-cancel-printing

  Method 3: Follow the steps in the link:

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Method 4: Delete and add the printer and then check.

  Add or remove a printer (Applicable for Windows 7)

  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Please report if you are still having the problem. I'll be happy to provide you with additional options available that you can use to get this problem is solved.

• OfficeJet 6000 E609n: HP Officejet 6000 does not connect wireless modem.

  I have Windows 8.1.  My HP Officejet 6000 wireless printer E609n worked well, until the modem is dead and a new one has been installed (new address).  I need to know how to recognize the new network address.  (Note: I tried to install the original installation software, but the CD would run under Windows 8).

  Hi @indyham

  You can use the following link to download and install the full software functionality for Windows 8.1; Printer wireless HP Officejet 6000 - E609n.

  I hope this helps.

• For officejet 6000 e609n driver not installed

  I installed the full driver for Officejet 6000 e609e and windows 7 says not installed with an error code 28 driver for officejet 6000 e609n.

  I solved the problem yesterday and posted my solution to 17:25 - my solution is somewhat against HP installation method (I think).  I have a small wireless network and the printer is shared.  Here is my solution, but I would like to thank you for having responded.

  It may be wise to reboot before continuing the installation process.

  Make sure that your printer is on (on).

  Access your installation from a CD, file or elsewhere and starts to run it.

  • Click on 'add a device '.
  • Choose "wireless 802.11 network connection" or one of the other two choices as adapts to your situation.
  • Select your printer by clicking it.

  One solution presented by Hsquared

• OfficeJet 6000 E609n print on USB. I can't make it work wireless

  HP Officejet 6000 E609n Win 7 64 bit

  My printer works on a USB connection, but I was not able to do

  function on a network wireless router connection.

  Router is Linksys WRT160N V3.

  I used all of the solutions recommended in the instructions from HP.

  OK, since you get the error "the selected printer is not present." during installation, here are a few troubleshooting that should help you narrow down the cause and resolve the problem:

  The printer is not found during Network Installation in Windows

• HP Officejet 6000 wireless E609n double-sided printing Option not available

  I have the printer above with a duplexer. There is no available duplex printing option in the print dialog box.  If I open the application HP Officejet 6000 E609n, under settings > Options tab > printing HP accessory two-sided (duplexer) is not checked. When I check it, then the duplex printing option is available in the print dialog box. However, after a print job with two back, the option is no longer available for further work. Reopening of the HP Officejet 600 E609n application reveals that the two box HP-sided accessor (duplexer) printing automatically returns to the off State.

  

  Hello

  Try to restart your Mac and find any difference, also run Software Update from the Apple menu and make sure there is no HP or Apple updates available, then check any change.

  If it persists, try resetting the aboid printing system any curropted configuration:

  * Be aware that reset the printer system will eliminate any existing queue and reset all custom settings driver.

  Click on the Apple menu and then click on System Preferences.
  Some Printers & Scanners.
  Right click (or Ctrl + click) your product with the Printers list in the left panel and then click on reset printing system.
  Click OK to confirm the reset.
  Type your user name and password.
  Click OK. The printing system resets.

• OfficeJet 6000 E609n: One color (black) does not print

  Background the color black does not print.
  Background page printed from the printer status indicates that there is no black ink. This impression has said that there is sufficient (at least 20%) supply of three coloured inks. Per the comment above, no black printing does appear on the page printed of the status of the printer, even if the black cartridge has been rather recently installed (2015-12-24).
  Background none of the four "low ink" lights on the printer are turned on.
  Background the State indicated by the HP Solution Center utility displays a green check mark, that is to say, that everything is OK.
  Background the "estimated ink levels" in the utility HP Solution Center indicate that the black ink cartridge is about 60% full.
  Background I've done the first of these two cleaning procedures to clean the print head. It produces no change. (In fact twice.)
  Background I removed the power cord to the printer and unplugged the power cord from the source and then wait 10 seconds. Then I reconnected things together. Nothing has changed.
  Background I cleaned the vent for the black cartridge.
  Background I replaced the black cartridge. The level indicated on the "Estimated ink levels" in the HP Solution Center utility now indicate that the black ink cartridge is 100% full.  No change.

  Background now, I think that the problem may be the print head.  I am discouraged.

  Any suggestions?

  Hi @Upper_Left,

  It seems as if the HP product registration service is temporarily unavailable.

  Normally you get invited to register immediately after installation is complete.

  It's a Web page that can help you know if the printer is listed, or as aid re-register once the number of available service - Registration Question Index.

  The term of defective kernel is used which means that the defective part you are replacing is the same part that you send back.

  When you select the option to change the replacement part is usually repaired or refurbished, is why there is such a difference in price between the parties. It seems that if the defective part is not returned within the specified time. 'faulty base tax' is loaded.

  I can't say for sure 100% that the problem will be resolved to the replacement printhead. If the printer was in warranty, it would be the normal order of operations.

  Please click the "accept as Solution" and the "thumbs up" button up on top of my first response above and other similar issues may find the easiest solution.
   
  Thank you!

• Use Officejet 6000 E609n of ink

  My color inks impoverish even though I have my settings to print the "black ink only.

  The printer uses little ink to keep clear print heads.  When printing, the print heads are restless on in the air and the color, print heads gets dirty if little ink is not spit on the nozzles before the print heads are capped.  See here for more information about using ink in printing.

• OfficeJet 6000 E609n worked fine until I added new cartridges. It wouldn't print. Mac lion.

  I unplugged and re plugged. No help. I deleted the printer and I tried to add it and got the message the selected printer software is available from Apple. Click Add if you want to download and add this printer. I tried 3 or 4 times and Apple says it has no software for the printer. I tried to download a driver to HP.com and HP says that the driver is available from Apple. WHAT TO DO.

  Download and install this: http://support.apple.com/kb/DL907

  Restart your Mac.

  Reset the printing system:

  -Go to System Preferences > print & Scan
  -Right (or control) click in the rectangle listing your printers and select Reset Printing System.
  WARNING - This will remove ALL your printers!
  -Select the sign more to add a printer. Select the default tab on the top of the window. Search for the printer, select it, and then beside the dropdown 'Use', select the model of the printer (not AirPrint). Wait for the 'Add' button becomes available. Until it clicks.

• OfficeJet 6000 E609n

  took a lot of grief lately with the printer took tech twice, has been cleaned, new ink, prints fine for a while and then does not print (even overnight), not even striped print.  have put to print black only, never had a problem until this year, bought in 2011.  sometimes will be perfectly printed test page, so does not print anything.  right now won't be ptint test page or anything.  We use the usb not wireless connection.  the print head back and forth, paper comes out but not to write on paper.

  Hey!

  Thanks for getting back to me! So happy I could help. Please take the time to click on the "accepted Solution" so that others can find the post on the Forums where they present the same problem. To say 'Thank you' to get back to you, please click the button "Bravo." These actions would be very appreciated!

  To remove the (2) instructions, I need you to let me know which operating system you are using.

  Thank you very much for the reply, looking forward to hear back on your part!

• Cartridge Officejet 6000 E609n Magenta has stopped printing

  The magenta cartridge has suddenly stopped printing several days ago. The last time it always printed, there were large vertical green lines on the right side (that I see) of the image. Now the only color that print is ugly green. I have always used HP cartridges only.

  GOOD NEWS: This problem seems to be resolved. The printer started working perfectly again after I have it disconnected from the power supply, wait 10 seconds, then all reconnected.

• OfficeJet 6000 E609n - Wireless concludes SSID and secure network but will not connect

  I use Mac OS 10.5.8. I installed the printer for USB and went to the next step to configure wireless. My secure network, it obtains the SSID and then asks the WPA personal password for the network. I enter this and click on continue and the message comes back, "the Wi - Fi network selected «...»» ' is not within reach of the unit. ' Button choices are 'Change network' or 'Retry '. Despite attempts unsuccessfully repeated. However, I scanned for other networks and found a secure and connected to this network. Go figure. My router is sitting on my desk next to the printer. The router is a D - Link DIR-655 n I'm on cable for ISP services. When I first bought the printer, we were away on vacation, and I've successfully added to my Mac laptop. I have reset the printer found in the then successful and user guide to establish a connection to the House, with the unsecured network (I don't live in a condo so no idea whence the other network). Thank you.

  You can try to update the firmware on your router.  Some of these models have had problems with HP printers and Netgear was subsequently fixed it with a new version of the firmware.

• HP Officejet 6000 a: after far right stuck paper jam

  HP Officejet 6000 a and Windows 10.

  After jam paper and jam, clearing printer turn on, goes through current transport parks, start right, flashing lites power and resume. Doctor says print "general Printer Error. Transport to open the lid does not come to Center and did not manually move parked at the far right. Close the cover, flashing lites power and resume, press summary and unplug the power cord when the cart is centered. Remove print head, close the lid, back the start-up routine. Open the lid and now transport stops in the Center and all the lites normals. With lamp torch and lid open (with cardboard in photo electric switch) and print head installed in position, pressing on the set of the view CV under presses of subsequent print head print head to prevent fresh ink while the printer is in sleep mode, remove the cardboard (lid open simulating) tray does not move downwards releasing the print head. Has gone through all six steps of the Solution and no help. Impossible to open the case to observe the load mechanism. Nothing else to try? Printer purchased January 2011 and printed only 5003 + pages and no problems so far. Do not throw with using more than that most just bought full set XL HP 920HP cartridges. should be possible to solve other than maintenance workshop, can buy nine being the least expensive.

  Help, please. Thank you

  Jesse

  Hi @jlmulanax1,

  Welcome to the Forums of HP Support!

  I understand that this transport on your HP Officejet 6000 a printer does not move correctly. I will definitely do my best to help you.

  I would try the steps in Th guides, r HP Officejet 6000 (E609) and 7000 (E809) Wide Format Printer Series - an "impossible cartridge" or "incompatible cartridge" Message is displayed on the calculationand lights flashing on the HP Officejet 6000 (E609a) and 6000 (E609n) wireless printers.

  You describe it sounds like the transport has stalls and if this is the case and you are unable to find the obstruction while the transport mechanism is defective.

  If you have completed all the above steps and your product still has a problem, service the product.

  Contact HP for service in all countries except Asia-Pacific.

  First, check your product warranty to check your warranty printer status and then go to contact HP support to find an authorized dealer or to schedule a repair.
  Cost of repair out-of-warranty printers may apply.
  What you can do, is to use the following link to create yourself a file number, then call and it can help to expedite the appeal process:
  Step 1. Open the link: www.hp.com/contacthp/
  Step 2. Enter the product number or select Auto detection
  Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
  Step 4. Scroll down and click on: contact HP options - click Get phone number
  File number and phone number are displayed.

  Hope that answers your question. Thank you for posting!

• The 6000 HPofficejet (E609n) will be added to the list of printers compatiable drop?

  I have not the drop list, how can I print to it since the E609n is configured as a wireless printer?

  Hello

  Do you mean AirPrint? HP OfficeJet 6000 not support Apple AirPrint and there is currently no plan to enable AirPrint on this model. However, there are other ways to print from an iOS device. You can download the mobile application 'HP ePrint' Apple App Store, and the app can print photos, document PDF and MS Office documents.

• Stop 6000 E609n print alignment PAGE. When turned on. Tried alignment of the control panel.

  Whenever I turn on the Officejet 6000 E609n wireless printer prints an alignment page.  How can I stop this?

  I tried aligning the printhead from the control panel and that does not stop the problem.   After that, I thought I'd try the box alignment tools of the printer but could not find it.   When I tried to go to the HP Solution Center, all I could get were geographical locations.  Also did not try the third method to align the print properties.

  From the center of solution... Follow the same steps to print a clean printhead... but this time to print a quality report...