HP Officejet H470btw wireless and Windows RT

Similar Questions

• OfficeJet 6500 Wireless, and Windows 7

  While the basic print driver is built into Windows 7, HP has yet to release the complete software for the all-in-one OfficeJet 6500 Wireless.  Exactly when this installation of the complete set of software will be available for Windows 7?

  The full download of features for windows 7 will be available for your product at the end of January 2010.

  While I am an employee of HP, I'm not an expert on all our products. When I offer advice, I do not speak for HP.

• AcrobatX worked well both printing and scanning when harwired to my computer. I went wireless and Windows programs work well both printing and scanning, but not Acrobat.

  Using Windows7 - I tried Windows10 but restored to 7.

  AcrobatX worked well both printing and scanning when connected to my computer. I went wireless and Windows programs work well both printing and scanning, but not Acrobat. In Acrobat, we don't get the scanner and printer prints in a .prn e-file, not to the printer.

  Help please...

  OK - I'VE CORRECTED THE PRINTER WHICH HAS BEEN INEXPLICBLY THE 'PRINT TO FILE' VALUE, BUT THE SCANNER IS STILL MISSING.

• Poster printer constantly turn the power off then on again. OfficeJet 4500 wireless on Windows 7

  New installation of HP Officejet 4500 Wireless on Dell Inspiron running Windows 7 Professional.

  I can't past the message on the printer then "shut off".

  I tried unplugging all the cables on hold and reconnecting repeatedly and in various orders, but without result.

  I find HP help impenetrable to user pages quite a novice.

  Can anyone offer a solution please

  Thank you very much

  Ted

  Hi Tedlngle,

  Remove the cartridges from the printer and then unplug the printer for 1 to 3 minutes, and then plug the printer back. Make sure that the power is connected directly to the wall outlet. Follow the instructions on the screen to the printer to reinstall the ink cartridges and let me know if you have the same problem?

• OfficeJet 6500 Wireless e709n, Windows XP, 0x6101bea and 0x610000d error messages

  The message general Printer Error 0x610000d came first and then a page was printed, but after that the printer will not print anything.  The Printer error message General 0x6101bea came later.

  Generally, these types of errors are an indicator of an internal hardware problem in the printer. There is a document with steps to help resolve this issue and the paper can be found here.

  I hope this helps.

• Wireless and Windows 8.1 (H520)

  (Lenovo H520)

  I just upgraded to 8.1 Windows and the loss of the wireless network.

  I downloaded & installed the driver software 64-bit, but still nothing.

  Any suggestion would be appreciated.

  
  

• OfficeJet 7500 a: officejet 7500 a and windows 10

  A3 format is no longer supported

  I installed the latest drivers again, but the A3 format no longer exists.

  Hi @Bart2015,

  Welcome to the Forums of HP Support!

  I understand that you are unable to select the A3 format for your HP Officejet 7500 a printer. I'd be happy to help you and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  I'm curious to know if the printer is using the correct printer driver. Check the device and printers to see if the class driver is used, rather than the HP driver.

  To devices and printers.

  • Press the Windows logo key + S to open the search.

  • Enter in devices and printers in the start search box and press or click devices and printers.

  If you see the printer HP Officejet 7500 a class driver, please re - add the printer using the HP printer Assistant.

  You can also run print and scan doctor to determine if the driver is damaged or improperly installed. Download and run the print and Scan of the doctor.

  What were the results when you ran the Print and Scan Doctor? (she print or scan, error messages)

  Also, here is a link to the latest print driver if you need.

  Please reply to this message with the result of your troubleshooting. I can't wait to hear strings attached good luck!

• HP Officejet Pro 8620 and Windows 64 bit 8.1

  A week ago, I bought a HP Officejet Pro 8620, but the printer never worked. It can scan and copy, but no impression at all. I tried uninstalling, reinstalling the software also using HP printer Installation Wizard. I also tried printing HP and doctor Scan, but nothing worked. It prints even an HP print test page and scan doctor, but she does not Windows print. In fact, when I tried to check the printer properties in windows and start a test where page, a message that it is not possible to print because of the driver is not correct in suggesting to ask HP a good pilot. Can I ask you... the printer driver is not compatible with 8.1 64-bit windows? And if so, why do you sell saying it's compatible? And why don't release you a new driver?

  Hi there is Andel,

  Please come back to me

  Notepad will print with the firewall disabled or active. That's good news.

  I'm curious to know if you try to print from a specific program that is not printing, or y at - it print a lot of programs do not? Have what programs you tried? (Microsoft Word 2010 for example)

  You can also try to configure the firewall settings to allow the printer. Who can help.

  How to change the firewall settings

  Another idea would be to create a new account of a user with administrator privileges. It may be a problem with one of the accounts if it does not print.

  Good luck, I would like to know how it goes

• Problems connecting an Officejet 7310, wireless and ethernet cable

  My printer (Officejet 7310) is connected to two PCs with an ethernet cable and the router. Now I want to install a laptop as well.

  I know that the lap top is communicating with the wireless router, but I can't get the laptop to recognize that there is a printer is installed.

  I tried to connect the printer directly (via Ethernet cable) to the laptop and it works fine. I downloaded the latest version of the software for the 7310 and used two options (without wire and cable).

  Any help would be most appreciated.

  Cutting the anti-virus made no difference.

  I HEALED NOW THE PROBLEM!

  Installed a new router 2wire.

  Thanks a lot for your help.

• HP Officejet Pro 8600 and Windows 8.1

  Vietnamese to 8.1 Windows installation, my printer worked fine.  I installed Windows 8.1 and came across the message - the printer error - before you can perform printer - related tasks...  I deleted and reinstalled the printer and it worked.  I printed several documents yesterday.  This morning went to print and the same error message is appeared, printing error.  I checked under devices and printers, and the HP printer has been grayed out.

  Please help in this matter.

  My suggestion would be to delete the old settings you have on the PC and re configure to Win8.1

• HP officejet 4500 wireless: connecting hp officejet 4500 wireless to my Pavilion

  I had to have my restored computer do to a virus. Now, I need to reconnect my printer wireless? This is where I need help. MY printer is a hp officejet 4500 wireless and my computer is a hp pavilion touchsmart sleekbook. My operating system is windows 8, but I don't know if it's 32 or 64?

  Hi @5839, welcome to the HP community there.

  I read your post about how you had your computer restored and now install your Officejet 4500 Wireless turn it on for your system!

  I can certainly help you!

  Click on this link to get the drivers and download the software you need to run your printer to install again through having: software HP Officejet full feature and driver

  I hope this helps you, if you need help, please let me know!

  If you like my answer to your concern today, click on the thumb upward below!

  Have a wonderful Monday!

• Scanner does not work on HP Officejet 6500 Wireless with MacBook Pro

  I have the all-in-one Officejet 6500 wireless and print fine but the scanner does not work even after the implementation of suggestions on the Web site.  I recently installed Mac OS x 10.6.8 but I had the same problem with the previous software.  Scan worked fine until the last few months.  I get the message that "HP Scan Pro quit unexpectedly" or "Sorry, an unknown error has occurred", but no additional information.  I have re-installed the software HP twice but to no avail.  What can I do?

  Try the scan using the Image Capture in your Applications folder.  Click your scanner on the left side, click "Show details" on the bottom.

• OfficeJet 4500 Wireless

  I use an Officejet 4500 Wireless and it worked with my old Mac Wireless perfectly. I just got a new Mac with OS X 10.9.5 operating system. I installed the printer on my Mac according to the instructions on this forum and was correctly run the wizard on the printer wireless. But when I try to print wireless, my computer tells me "the printer is not connected. (It works fine with the cable, FYI).  What Miss me? Help, please.

  Thank you.

  Welcome to the @Xuxa forums

  I understand that you are unable to print on your Officejet 4500 Wireless since installing it on your new Mac running the Mavericks. I have some suggestions for you to try.

  Please try in order:

  1. Reset the printing system
  2. Repair disk permissions
  3. Restart the Mac.
  4. Follow this guide: install a printer Mac driver by using Apple Software Update
  5. In addition, to download this Apple driver: HP v3.0 for OS X printer drivers

  Try printing again and it should work!

  Good luck!

• HP Officejet 4500 Wireless scanning

  I have a HP Officejet 4500 Wireless and use the Mac OS X operating system 10.5.8,. When I scan photo they open in my preview software. How and where can I change the settings so that they open in Adobe Photoshop?

  Hello

  Instead of scanning from the software, try scanning through your app (Adobe PS). The preview should then be given to you by the PS.

• OfficeJet 8500 Wireless problem

  Hello - my printer all-in-one Officejet 8500 wireless worked fine until I replaced my router to a BT Home Hub 4. I have no problem with the router, but to use the wireless printer, I need to enter the key wireless, so it can connect it. Unfortunately, the upper half of the touch pad on the printer (where you select settings, etc.) does not seem to respond to touch the most so I have no way I know to enter the wireless key. The lower half of the touchpad where you select print options etc. seems to work very well.

  Is there a way I can work around by using the button on the printer? That's my problem can be solved easily or do I need an engineer visit?

  I use a MacBook Pro and iPad to print from then I am unable to use HP Print & Scan Doctor (although I could use that I don't know if this can help with the kind of problem I have).

  Please can someone help?

  Hey heavy-lou.

  I see that you have an Officejet 8500 Wireless and have a problem with the get connected to your BT Home Hub 4 router due to a problem with the screen on the printer.  I understand that you want to use the wireless printer, but it can be a little difficult to connect via the front panel with the display problem you mention.

  Temporarily, I would advise the printer connected with an Ethernet cable to get a valid IP address on the BT Home Hub 4.  Due to the display problem, it can be difficult to print a page of Network Configuration of the device.  However, the steps to do so can be found here.  However, you can access the SAP (built-in web server) the BT Home Hub 4 by typing the IP address of the network domain in a browser bar and pressing ENTER.  Once here you find the complete list of devices connected to the network and see what IP the HP Officejet Pro 8500 Wireless is assigned.

  Once you have the IP address of the printer, you can then type the following in a browser's address bar to access the Web integrated printer server.  In this section, you will be able to select the network tab and run the Wireless Setup Wizard is located in the SAP of the printer.  It will be able to bypass the display problem.  If necessary, check the encryption for the printer settings in the EWS network section to make sure that the settings are compatible with the current encryption on your network type (WEP, WPA, etc.).  Once the complete wireless Setup Wizard it will ask that the product be disconnected Ethernet network that the printer is supported both at the same time.

  I would like to know if it is able to help get your printer connected wireless to your BT Home Hub 4

  Jason