HP Officejet Pro 6830: Get the "" run DLL"message after uninstalling printer HP 6830

Similar Questions

• OfficeJet Pro 8615: get the Communication Error Message even if the printer prints

  Whenever I have print using my USB connected 8615 Pro, the printer prints , but it is different because I still have the error message firt my computer cannot communicate with the printer. Everything is up-to-date. When you ran the scan & print Dr, there is no update, he contacted the printer (which took less than 10 minutes), then I clicked on the print correction tab. After all a late minute two or so, I got the unable to communicate the message BUT it printed the page test OK after 30 seconds to a minute. Any suggestions?

  Hey @C_Wolf,

  Welcome to the Forums of HP Support!

  I understand that you have some problems with printing to your Windows 7 PC to your Officejet Pro 8615 e-all-in-one printer. I can help you with that.

  To start, make sure that the printer is plugged directly into a wall outlet, not a surge protector. Once done:

  1. Remove the USB cable to the back of the printer.
  2. Close any programs you have open.
  3. Click on start and open devices and printers.
  4. Right-click on any icon of your printer listed.
  5. Click on remove the instrument.
  6. Repeat for any other icon of your printer listed.
  7. Connect the USB cable.

  Please let me know the results after following the above. If you are able to print quickly, click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• When you try to scan a document on HP Officejet Pro 8500 get the message 'Insert MEMORY' or 'no scan options '.

  When you try to scan a document on HP Officejet Pro 8500 get the message 'Insert MEMORY' or 'no scan options '.

  Original title: I scan a Document

  Hi Robert,.

  The instructions in the article are valid for the model of your scanner. Click the plus sign next to your operating system for more information.

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c02450835&cc=us&DLC=en&LC=en&JumpID=reg_r1002_usen_c-001_title_r0001#N6626

  If the problem persists please post the request on the HP support for additional support:

  http://WWW8.HP.com/us/en/support.html

  Please follow these recommended steps and post if you still experience the problem. I will be happy to provide you with additional options.

• OfficeJet Pro 8610: Get the Permission of HPeprint or security problem error

  I used printing wireless for several months successfully to print from my work computer, but am now able to print to the e-mail address provided.

  The error reads 'your message was not delivered because of a permission or a security problem.  It may have been rejected by a moderatory, the address can only accept email from certain senders, or another restriction to prevent any delivery.

  The Organization rejected your message: hpeprint.com. »

  I've reconfigured my printer to my router.  Any suggestions?

  Hey @LoreeW,

  Welcome to the Forum from HP Support. I hope you enjoy your experience here.

  I understand that you have a few problems with ePrint using your HP Officejet Pro 8610 e-all-in-one printer.  I want to help you with this.

  I recommend that you first check your printer to verify its intact ePrint connection:

  • Touch the icon (webservices)
  • If you see an address @hpeprint.com, I recommend that you try to send a test ePrint from a different email domain than what you use on your work computer.  If it prints correctly, we can rule out your printer as being a factor in this particular issue.  If your printer's Web services is enabled is more, re - enable.  Any problem would occur with this, click here to access another relevant post I created.  Scroll to my suggestion re: setting a manual DNS as this tends to help by allowing the webservices where fail the normal steps.

  If you were able to send your printer work ePrint of any e-mail domain other than the one you use at work, read on.  Click here to see an HP ePrint article that focuses on the various factors that can contribute jobs ePrint not printing not.  Note that some areas of corporate email may become incompatible with ePrint due to the presence of a digital signature in the outgoing message template.  EPrint jobs you send work meet these criteria?

  Please let me know the result of your troubleshooting by responding to this post.  Thanks again for reaching out in the Forums - we are always happy to help you.  If I helped you to solve the problem and that you liked this post, feel free to give me virtual accessories by clicking on the 'Thumbs Up' icon below.

  Have a great day!

• get the AIO_CDA_Software.msi message when uninstalling, then asks to find the path of the other, but none is available

  Tried to uninstall a component of HP printer, has got the answer above - permanently.

  Hi Paul,.

  1. which element of the printer you are trying to uninstall?

  2 is this problem limited to the HP printing software?

  3. What is the full/exact error message?

  It looks like it could be registry errors when uninstalling through Windows Installer. You can run the Fixit and try to uninstall the software.

  Solve problems with programs that cannot be installed or uninstalled

  http://support.Microsoft.com/mats/program_install_and_uninstall/

  a. click 'Accept'
  b. Select "Detect problems and apply the patches for me".
  c. Select "Uninstall".
  d. Select the program to be uninstalled.
  e. Fixit will look for bad registry files and try to uninstall the program.

  If the program is not listed, or if you try to uninstall a printer driver, you can let us know.

  Hope this information helps. Response with status so that we can help you.

• Get the Trial Version message after buying cs6

  I don't know what to do. I get a trial version message each week and I bought CS6 extended 6 months ago and have a serial number! I enter my serial number each time and the message disappears, but then returned. Whats going to happen when he thinks that my trial version is out of stock? I'm going to lose my program of cs6 photoshop I already paid for and use for 6 months? Im very concerned. Help, please. Thank you, my best, rick

  Hi Rick,

  It has just been announced and should solve your problem (ping back if it is not).

  Kind regards

  Steve

  We released today Photoshop update version 13.0.4 (for perpetual Mac clients) and 13.1.2 (for cc members, Mac and Windows), this issue of license:

  • Trial is displayed when you open Photoshop CS6 - when you open a copy of Photoshop CS6 which you bought, a notice that you can try this product for 30 days

  How to get the update

  1. in Photoshop, choose Help > updates.
  2. the Adobe Application Manager will launch. Select Adobe Photoshop CS6 and updated.

  l http://blogs.adobe.com/crawlspace/2013/01/Photoshop-13-0-413-1-2-updates-now-available.htm

• I get the xpmcom_core.dll message and things don't work... help!

  Some aspects of programs to load is no longer in its entirety... for example: colors are missing, etc. I'm not much more for computer - speak so I need simplified English help! Thank you...

  Hello

  ·         What is the exact error that you are experiencing?

  ·         What programs you are you talking about?

  ·         Since when are you facing this problem?

  ·         Remember to make changes to the system?

  ·         When you are experiencing exactly this problem? Randomly, or each time that access you any application?

  I suggest you follow the steps mentioned below.

  Method 1:

  I suggest to do a SFC (System File checker) scan on the system and check if the problem is resolved. Follow the steps mentioned in the article below.

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

  http://support.Microsoft.com/kb/310747

  Method 2:

  If the problem started recently, so, I suggest you do a system restore and see if the problem is resolved. Follow the steps mentioned in the article below.

  How to restore Windows XP to a previous state

  http://support.Microsoft.com/kb/306084

• HP Officejet Pro 6830: Unable to communicate with the Scanner

  Printing is fine and just impossible to scan.

  I tried to solve the problem of scanner/copy of the measures:

  1. run a 'HP Print and Scan Doctor' to check

  2. click on 'Scan of difficulty' to identify the error

  3A through the steps with all green ticks, with the exception of the driver with a «!»

  4. with the result, I went and download the latest driver to update the scanner and also did a update system for you ensure that the printer is so far

  5. after the update I still get this message from the scanner "Unable to communicate with the Scanner" and when I press the button of scan/copy the printer only a "ding" sound occurs but nothing is scanning / copy

  Note: I brought the printer 2 months ago and this is the first time that's happened

  Hi @Flash1688,

  Welcome to the HP Forums!

  I see that you are unable to communicate with the Scanner with your HP Officejet Pro 6830 on Windows 8.1. I'm happy to help you!

  If you just try to make a copy with the printer, it works? You see on the screen of the printer error messages? Copy of Documents. Also, if you lift the lid of the scanner during the copy process, you see a light come ON and the scanner bar moving?

  In the meantime, please, try the procedure described in this guide, a message 'no computer found' for HP Officejet 6810 and HP Officejet Pro 6830 e-all-in-one printerand let me know what happens!

  I hope hear from you soon!

  "Please click the Thumbs up icon below to thank me for having responded."

• HP officejet pro 6830: locking of the administrator

  Computer a major accident.  Now can not set or access all the settings through the printer wireless or the

  ALL in one software.  Need factory reset procedures, any help would be appreciated.

  Thank you

  Hi @drmjr,

  Welcome to the Forums of HP Support! I see that you are currently locked out of your HP Officejet Pro 6830. This occurred when the computer that is running the Windows 7 operating system has crashed.

  You should be able to do this by restoring the default network settings in the front panel:

  Menu Configuration > Wireless > restore default network settings > Yes

  This aid? If this is not the case, continue below:

  The lockout is really designed for printers to prevent others to make changes to printer that could affect the behavior of the printer.  For example, to keep the date and time the Fax value see him exactly receive time.

  Get the IP address of the printer by pressing the network icon at the top of the screen.

  Enter this IP address into the address bar of a web browser on a computer.  Printer status page should load.  If you receive warnings of certificate, choose the option that allows you to continue anyway.

  Click settings and then go into settings of the administrator on the left.  Many of the features of the façade are ordered here. Make sure everything is checked except control lock. Once it is defined, click on apply.

  Power off the printer for at least 1 minute and power then turn it on again to force the new setting to take effect.

  Let me know the results. If this resolves the problem please let others know to mark this message as "accept as Solution".  To simply say thank you, click the "Thumbs up" below!   If you need more assistance let me know and I will gladly do everything I can to help.

• OfficeJet Pro 6830: you need all 4 cartridges the printer print?

  I have an Officejet Pro 6830, and I need to replace the cartridges. I accidentally threw away all four, but I went to the store to get a black and that's all. But when I try to print something, it says: cartridge problem and it will not let me print.

  Yes, all 4 must be installed and running.

• OfficeJet pro 6830: display the date at the bottom of page

  OfficeJet pro 6830 bought a couple of days. I noticed that when you print, it does not show the name of the site, or the date at the bottom of the page. Is it possible to get the printer to display the name of the site and the date at the bottom of the page?

  Thank you

  Hello

  As mentioned above. I use Firefox why the screenshot for Firefox and IE is very similar. Click the icon for the printer (or Ctrl + P) you marine the followwing screen:

  

  Kind regards.

• HP Officejet Pro 6830: NEW HP PRINTER only IS NOT supported with the current El captain on Apple Mac software

  Hi have just purchsed the HP officejet Pro 6830 and the course of development in place, is that the current operating system (Mac El Captain) does not support this printer. FRUSTRATING! Suggestions that I can download other software that will support the printer or do I have to return it and get another printer?

  Hello!

  Try the printer driver called HP v3.1 for Apple's OS X printer drivers.

  You can download it here: https://support.apple.com/kb/DL907?locale=en_US

  Let me know if this helped.

• OfficeJet Pro 6830: Printer several times in the process of disappearance

  I keep having trouble with my printer. It worked fine for a few weeks, when I first bought, and then it suddenly stopped to record with my mac, despite being connected via USB.

  The first two times, as it happened, I spent a LOT of time searching through your forums, find an answer later. I'm clearly not only the person with similar problems - don't know why you guys can just put up a page on this topic and facilitate the difficulty.

  However, today I find no solutions. I don't have the technical knowledge to make things complicated and I am appauled that HP does not have a call center or lives the Charter for me - I saw the mention of these things, but I can't find where on your website that offers them. Maybe because I'm in Australia. HP has proved to be an extremely bad for making choices.

  Why my printer don't suddenly ceases to be detected? I had an old printer old until I upgraded that NEVER had this problem. Please tell me how to solve this problem. (and band not only help, but stop to happen). I rely on this printer, every day and every time it disappears, I lose a lot of time trying to get connected again.

  Hi @NaomiC,

  Welcome to the HP Forums!

  I noticed that your printer HP Officejet Pro 6830 maintains endangered, on Mac OS X 10.10 Yosemite. I'm happy to discuss this issue for you!

  A few questions for you:

  • When the printer breaks off communication with the Mac, you are still able to make copies, using the glass of the scanner of the printer? Copy of Documents.
  • Have you tried to connect the printer USB cable other ports on the Mac?
  • Have you tried another USB printer cable?

  In the meantime, please, try the procedure described in this guide, "printer offline" or "printer not responding" Message (OS X)and let me know what happens!

  Hope this guide helps and hope to hear from you soon!

  If this, or one of the posts on this thread, helped you to solve the problem, please click 'Accept as Solution' said post. To show you 'like', or that they are grateful for my post, please click the thumbs upwards below. If there is anything else I can do to help, please don't forget to let me know!

• OfficeJet Pro 6830: there is a problem with the printhead - estimate of repair costs?

  Getting the message "There is a problem with the printhead".  Found the document tracking and troubleshooting got to step 3 where it says "the printer to Service."

  Naturally, when I checked, I found that our guarantee missed three weeks ago.  The printer lasted more than a year...

  No idea what it would cost for this repair?

  Or given the pricing model for ink jet printers, are we better off he throw?

  We had an Epson printer that has lasted several years; Maybe we should go back to them?

  Hello

  Try to contact the HP Support by filling out the form below, you will receive a case number and the details of the phone:

  Note: Changing the country click and select your region as required

  https://support.HP.com/us-en/contact-HP/product/HP-OfficeJet-Pro-6830-e-all-in-one-printer-series/5390307/model/5390308

  Be sure to have proof of purchase available to provide the necessary technical support representative.

  In my opinion, that they might be able to help without charge if shortly after the end of your warranty period (even though I'm the head of my experience, not on behalf of HP).

  Do it as soon as possible and let me know how it goes.

  Shlomi

• OfficeJet pro 6830: transport cannot return the cartridge access area

  I'm trying to set up my new printer 6830, but I got the transport Jam error message: "remove any packaging from inside the printer.» After all packaging is removed, turn the printer off and then turn it back on. "My new printer came not with the thing of white foam in the transport. And I think I've removed all the bands and plastic/foam of the printer as shown in the introduction the guide book. Could someone tell me where should I look for a package that needs to be deleted? Really appreciate any help.

  Hi Meiaja,

  Here is the link to HP customer care:

  https://support.HP.com/us-en/contact-HP/product/HP-OfficeJet-Pro-6830-e-all-in-one-printer-series/5390307/model/5390308

  Scroll down the page and you will find a support model to fill.  Once you fill out and click on 'Show the Options', you should get an option to call the help desk with a no of cases.

  I don't know the policies of Tiger Direct.  They can cover the cost of shipping, or they may not.

  I would call 1 HP customer care.

  Jean