HP Officejet Pro 8600 - analysis not front panel

Similar Questions

• My new HP Officejet Pro 8600 will not analyze superior at 300 dpi of the location of the single document.

  My new HP Officejet Pro 8600 will not scan more than 300 DPI when scanning individual photos on the glass plate. I do not use the document feeder. I use this printer wireless on an iMac and a PC.

  Hello

  You can pass the value of hp scan: launch of the demand application, select the shortcut to scan (PDF or JPG to the left) and change the resolution you want and save.

  This will send down the printer settings. So the next time you scan, the printer uses these settings.

  Good impression.

• OfficeJet Pro 8600 does not scan full page legal-size

  I have seen this question several times in these forums, but solutions do not apply to me - I can not find the applications or the settings or patches do not resolve the problem. I am running Windows 8 32-bit with a HP Officejet Pro 8600. When you scan a legal size document, the entire page is not scan, even when I select a custom size. The bottom is cut roughly where a letter size page would end.

  If you respond with a solution, please be very specific, i.e. If you say "Control Panel", you mean the control panel of Windows 8 or the small touch screen of the printer itself? If you want "pull me up to the HP application", please say that the we - there are several installed on this computer, and I've tried them all.

  

  Thanks in advance...

  In fact, the problem was located. I is broke and finally called HP support. It turns out that, contrary to the information that I have seen elsewhere, legal size paper MUST be analysed the ADF, not the dish. You can see a white band across the plateau where the search starts. The dish is physically unable to accommodate legal communication. Once the original is loaded in the ADF, the size of the document options now include legal communication.

• HP Officejet 8600: HP Officejet Pro 8600 - does not print lower 1/3 of the page

  Text & images on lower 1/3 of the pages do not print on my 8600. I believe that I have updated the printer drivers and my laptop HP dv7 Envy.  I think I checked all the settings - however, the problem persists. Any help would be appreciated.

  Hey @gmi7envy,

  Thanks for posting in the Forum from HP Support.

  I see you have a partial page printing problem when you use your HP Officejet Pro 8600 e-all-in-one printer. I want to help you with this. I have some suggestions that might help.

  I think it is a problem of software, but just in case, try to make a copy of the façade - if printing result is normal appearance, fine. If this is not the case, click here to access hardware troubleshooting tips from HP.

  Assuming you were able to make a decent copy of the façade, we will assume that your printing problems are focused on software. Accordingly, I recommend you try the following steps:

  Uninstall your printer

  • Press the Windows key + r
  • Type of control panel and press enter
  • Click on programs and features
  • Select the driver for your printer from the list, and then click on uninstall.

  Remove temporary files from your PC:

  • Press the Windows key + r
  • Type %temp%, and then press enter
  • Press Ctrl + a to select all files
  • Press Delete
  • Note that some files do not delete - do not worry, this is normal. Simply click ignore that you're prompted.
  • Empty your trash at the end.

  Download the printer Installation Wizard

  Click here to install the HP printer install wizard (instead of directly using the printer driver). When you run it, this utility will facilitate what I hope it's a smoother and more efficient printer installation.

  Please let me know the result of your troubleshooting by responding to this post. If I helped you to solve the problem, feel free to give me a virtual h.o.t. by clicking on the 'Thumbs Up' icon below and clicking 'resolved' (this will help others find the solution).

  Thanks for posting in the Forum from HP Support.

  Have a great day!

• OfficeJet Pro 8600 analysis stops at Midway

  With the help of a relatively new in Officejet Pro 8600 on my iMac with OSX Mavericks.

  Printer is set up wireless, printing works fine. Scanning did too, until yesterday.

  When I scan a document through HP application scanning, or Mac "scanner" that appears in the Printers window, the printer is now the noise, the status bar starts and then stops. It does not move. I left it like that for hours, just to see what happens, and when I come back the job has been cancelled.

  Wireless connection is obviously good, as I can print and even when scanning printer responds immediately. It just isn't really complete - or even apparently start - the scan.

  Any idea of what is the cause? It seems that this could be a faulty machine.

  Thank you!

  Hello vertov,.

  Welcome to the Forums of HP Support!

  I'm sorry to hear you're having this problem with your 8600 scanning. A quick way to determine if your printer is having a hardware problem, make a copy.

  If the printer can make a copy, it is not a problem with the hardware with the scanner from scanning. If a scan failure is present on the printer, try looking in the steps detailed here: A 'Scanner failure' Message is displayed on the printer control panel.

  Also it is better to have the printer connected to a wall outlet directly for power, this will help you understand why: issues when connected to an uninterruptible power supply/Strip/surge protector power.

  I'll come back and get your answer.

• After the restart of mac OS x lion, the scanner hp wireless officejet pro 8600 does not appear.

  The printer works properly from the computer with Wi - Fi. The copy of front button works correctly to print a copy of the document on the scanner. But when you run the HP Scan 3 application, the error message is displayed: scanner communication cannot be established. OfficeJet Pro 8600 [CDD814] is currently unavailable. Make sure that your device is turned on, check the connection and make sure that your network is working properly. If these conditions are correct, restart the device and try to scan the image. After clicking OK, the unexpected fast HP scanning error button appears. Turning then does not cause the parser should appear. Using the system preferences > Print & Scan shows the printer but does not show the scanner. By selecting the button scan in the box dialog does not reveal a scanner.  Device is only 1 month. Help!

  I have connected to the Live cat HP, which has accompanied me through the process. It turns out that I had to delete the printer, then turn off the router and the printer. Reload the drivers from the CD. Reboot the router and the printer, and then run the installation program. Seems the router, "forgotten" on my printer and scanner. Thank you, HP!

• HP Officejet Pro 8600 most not recognized on the network

  I have a Qwest DSL Modem/router that has 4 ports on the back.  I use 1 Port on the DSL Modem/Router to conntect to my NetGear router.  I use 2 ports on the router/DSL Modem to connect my printer HP OfficeJet Pro 8600 Plus.  I use 3 Port on the DSL Modem/Router to connect my Brother MFC-7360N printer.  I do not use 4 Port of Modem/router DSL.

  My NetGear router is used to connect all cable (5) computer in the House.

  I was able to successfully install the software from the Brother printer on all computers and can print on the brother of one of the desktop printer.

  I have the HP printer software installed on all computers, but on WIN XP desktop pc I can not detect the printer on the network.  During the installation process, the software detects that the HP printer and the WIN XP pc are connected to two different routers (DSL Modem/Router is detected as a router by WIN XP pc).  On the another desktop running WIN8 or WIN7, it has no problem detection even if the printer is connected to the DSL Modem/Router, while the PC is connected to the NetGear router.

  Someone at - it some knowledge that why I'm having this problem.  The problem seems to be with the WIN XP pc and not the pc WIN7 or WIN8.

  You run a double NAT scenario, is not good.  Simple correction, switch the gateway (modem/router) in Bridge mode, which disables the functions of router and do just a modem.  Now, connect the Netgear router to the bridge and this have to manage all of your Wi-wired connections and.

• OfficeJet Pro 8600 is not connecting to my router from 3 BT HomeHub

  Hello

  I'll put up my new of Officejet Pro 8600 today and I was not able to get connected to my wifi router. If I try to use the wireless configuration wizard, I get an error saying that the password that I entered is incorrect (this is not - I tried several times to be sure) and I can't use the WPS connection option because this feature is currently disabled on the HomeHub 3 routers.

  Can I connect the printer directly to a computer (via USB) or router (via ethernet), but none of these options is convenient as a permanent solution, given the current provision of my home office.

  MAC filtering is not in place on the router.

  You have other options I can try to get this printer running on my home network?

  Concerning

  Sabine

  OK - got this problem 10 minutes after posting the original question. Typical!

  The solution was to connect to the main desktop via USB and then use the 'Wi - Fi connection transfer' option in the HP configuration utility.

  Concerning

  Sabine

• Google cloud print for officejet pro 8600 - could not get information at hp printer.

  I just bought a new of OfficeJet Pro 8600 today. Everything seems to work perfectly except for the Google Cloud Print connector. I can print of AirPrint, as well as e-mails to the address hpeprint.com, but when I try to record using the google site, I get the error message "could not pass information on HP printer.

  The printer is connected by ethernet wireless and it seems to work find out otherwise. I have no restrictions that can send print jobs and I changed the email address for hpeprint.com several times, as suggested in other forum threads, but it can never connect to the Cloud Print service. I'm at the level of the last firmware listed on the HP website. I tried to open the connection of several PC if several web browsers though.

  It was an important factor in the purchase of this printer. Help someone?

  OK, nothing is different tonight, but it just worked. I had just opened a chat to HP support and he gave another chance just to confirm, and I came to the page "registration successful". Prints crossed chrome without any problem. I made no changes to the printer, PC, or network. So, the best advice I can give is - it wait a few days... If all goes well, he continues to work :-)

• HP Officejet Pro 8600 - do not install scanning software

  Hello

  I bought a HP Officejet Pro 8600 more and the software in the box was for Window XP or Windows 7, I am running Windows 8.1. I tried to download the drivers from the wensite of HP, but I get an error message saying: the file is corrupted, or when I click on the e button to download nothing happens.

  I am currenlty printing using a USB cable but I need to scan documents, can you please help?

  Thank you

  Helen

  Hi, give the HP printer to try the Setup Wizard. (link)

• This officejet pro 8600 is not duplex scan size of different pages, only the size of page letter

  I have a desktop hp jet pro 8600 and printer. My original printer scanned pages front and back of different sizes, the printer stopped scanning properly and I replaced with the same model. Now, this printer can not scan other than letter size paper. I can only scan two-sided letter-size pages! The reason why I bought this printer has been for its scanning capabilities. I talked to support HP they said it scans only some dimensions of the page in duplex mode. Please HP DIFFICULTY this problem and give your customers the ability to SCAN RECTO VERSO DIFFERENT SIZES of PAGE. I've been with hp for many years, printers, laptops and a computer

  Message reads

  "The document feeder only supports analysis for some sizes of paper double-sided. If your original is too long or short, use the scanner glass.

  HP I'm supposed to use glass scanner page-by-page, I bought a officejet pro for special to spend less time scanning features manually. I wonder what the reason for this restriction of page size, it worked on my previous printer.

  I solved this problem without downgrading the firmware to version CLP1CN1232AR.

  I downloaded and installed HP Web Jetadmin to do this (www. HP.com/go /webjetadmin). Then, I followed the instructions on the manual (http://h10032.www1.hp.com/ctg/Manual/c01943164.pdf) to activate this option.

  The image I used was obtained on the HP ftp site: ftp://ftp.hp.com/pub/networking/software/pfirmware

  The name of the image is: ojpro_8600_n911_g_n_1232A_09272012.ful.rfu

  Now, I can scan both sides of the legal size.

• HP Officejet Pro 8600: Officejet Pro 8600 do not print

  I keep getting "the printer is not connected" in the print queue when I try to print wirelessly with my mac os x 10.9. The printer and the router are turned on and I recently installed the printer software, because I have not yet printed with this computer. I am able to print with my laptop windows 7 fine. Any advice?

  Welcome to the HP Forums @bg34,

  I read your post on printing problems you're facing in your Mac running 10.9 when printing your Officejet 8600 and I wanted to answer with my suggestions for help.

  See this link, try the steps in order and also try the "things to try" section and you should then print!

  "Printer offline" or "printer does not" Message (OS X)

  If you have trouble, let me know and I'll do my best to help.

  Hit the "Accept as Solution" If we have reached a solution and the "thumbs up" to say thank you for my help.

  Have a nice day

• 8.1 win and HP Officejet Pro 8600 does not connect

  
  

  Hi Dennis1825,

  I understand that you had a few problems with your Officejet 8600 printing since the upgrade to Windows 8.1. I'm sorry to hear what is happening, but I'll certainly try to help.

  To get a little help with this question, I would like that you can download and run the HP print and Scan Doctor (running for printing of trouble and difficulty in analysis to ensure that it detects any problems) and if all goes well it should be able to solve this problem for us.

  Hope this helps, have a nice day!

• 8600: scan Premium OfficeJet Pro 8600 does not work since the upgrade of Mac to 10.10.1 (Yosemite)

  Since the update of my MacBook Pro in Yosemite, I can't function of the computer analysis to work. I downloaded again the softwear & reinstalled; reset the printer, repaired disk permissions, etc. nothing works. I also note that the HP Utility icon no longer appears.  Print and copy work very well. Any suggestions?

  I tried everything above. When I add the printer driver printer HP (instead of AirPrint) does not show as an option (even if I can find it in my downloads folder). Option is the HP DeskJet that comes with a warning that it cannot be the right driver. Also downloaded what seems to be the right driver on the HP site. He also appeared in my downloads folder. HP utility always not available.

• HP officejet pro 8600 does not scan

  I have been using offijet pro all-in-one for 1 year and a half and recently I started having problems when scanner before that this was not a problem.
  
  2 months ago, the printer has not left me more scan to the computer using its features touch screen, for example, I used to which copy of computer on the screen of the printer and it used to work. All of a sudden I started to get the message across "to scan to a computer make sure that the feature is enabled." Open the HP software... »
  
  Then, I found a solution to this by clicking on the scan of my laptop, for example, I found the hp icon scan and the window would come and I could scan.
  
  Two days ago I went to try to scan and when I click on the HP SCAN icon on my laptop it simply does not come to the top! as if I'm not clicking on it. I also tried to scan by clicking on the icon of the hp software where he gives you access to change the settings, get ink levels etc... but the same things happens, it opens!
  
  Within these 2 days for a reason any after click on scan HP several times and restarted the laptop, but sometimes it worked most of the time it didn't. For example today I failed to get to only Scan not even once.
  
  My laptop is hp compaq 6730 s.
  
  NOTE: TO PRINT FROM MY LAPTOP TO THE PRINTER WIRELESSLEY. THE PROBLEM IS WITH THE SCANNING

  Thank you for your help, much appreciated. Somehow after a month it suddenly starts working again. However looking back, this week I just uninstalled the HP UPDATE and installed a new. I think it was the thing that solved the problem.