HP Officejet Pro 8600 Plus - printing of Documents for glass copy and charger slowly

Similar Questions

• HP Officejet Pro 8600 Premium: Printer leaves black lines during copy and scan from ADF

  I know this question has been asked several times, but whenever I try to copy or scan from the automatic document feeder, it leaves black lines on the copy (with the document on the works of glass like a charm).  I've read through the forums and have tried the advice to unplug the machine and so on, but none of these suggestions work.  Any help would be appreciated.

  Hey @Huskers1,

  Welcome to the HP's Support Forum!

  I see that you have some problems with a line when copying from the document on your Officejet 8600 Premium feeder e-all-in-one printer. I can help you with that.

  To start, make sure that the printer is plugged directly into a wall outlet, not a surge protector. Once done:

  1. Get a little water and a lint cloth.
  2. Open the left upper part of the printer, where the document since the charger goes into the printer. It should open up as you opened a book.
  3. With your damp cloth wipe the rubber stamp, the rollers in the cover and the casters on the bottom of this section.
  4. Again open the left side of the printer, as you opened a book.
  5. With your damp cloth, wipe the rollers, you will find inside this section.
  6. Close the upper sections of the printer and open the flat section.
  7. With your damp cloth wipe the rollers and the white bar you see on top of the printer
  8. Clean the glass on the left side of the printer.

  Once all the pieces you cleaned dry, please let me know the results. If you remove the line, click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• HP Officejet Pro 8600 Plus: HP Officejet Pro 8600 Plus printer-

  HP Officejet Pro 8600 Plus printer-

  Tried to copy both sides of a vehicle using ADF permit; paper too small (stupid user!); he copied the first side successfully. Now, I can't find the input document! How can I remove paper (which I can't find) which was too small for the auto feed?  It is not in the duplex unit, either.

  Hi @Dick_27,

  Welcome to the HP Forums!

  I appreciate that you try to remove the paper in your printer more HP Officejet 8600. I'm sorry to hear that, but happy to help!

  Please have a look through this guide, A display of the "Paper jam" error on the HP Officejet Pro 8600 e-all-in-one printer series.

  As well as this guide. The ADF (ADF) documents didn't pick up paper.

  I hope that these guides are useful and have a nice day!

• Re: HP Officejet Pro 8600 Plus print but not scan

  I'm on Mac OS X 10.6.8 and recently bought an OfficeJet Pro 8600.  It worked fine for about a month, and then we moved into a new House.  Now, it print but not scan to computer.  It scans email fine.  Same problem wired or wireless.  It is said the computer Scan is not enabled.  When I try to activate scan to the computer using the HP utility, he runs for a long time and then says that the connection has been lost.

  Hi mpk1969,

  Mac OSX:

  Try the following steps.  If you want to learn more about your product, click here.

  How to perform a scan: OS X v10.8

  1. go to the HP utility to 8600 of (Preferences system, scanner open, click on the utility tab)

  2. under scan settings, click scan to the computer

  3. make sure that a check mark beside enable scan of the computer

  4. click OK in all the dialog boxes and of proximity

  5. try scan of front panel

  Follow the steps below

  1. open System Preferences

  2. Open Print & Fax

  3. in the white box under printers right-click and select Reset Printing System

  Note: resetting the printing system will remove all printers in the print queue

  4 restart the computer

  5. Open Print & Fax and then click the + to add the printer to the print queue

  6. open the HP utility, and then click Scan to computer to make sure this option is

  Try scanning the computer to the printer and let me know what happens?

  Windows:

  HP has designed a quick and easy tool that diagnoses and solves many problems of printing, scanning and connectivity: The HP Print and Scan doctor. HP recommend you to download and install Print and scan doctor no matter what time you need to solve a problem with your HP printer from the link below.

  I would like to know what are the errors you receive?

  http://www.HP.com/go/tools

• HP Officejet Pro 8600 Plus: printing and scanning option is not presented when one clicks on destop icon for HP printer

  When I click on the HP printer on the desktop icon, it does not open the usual window for all functions of the printer.  I just get a notification asking if I want to leave the program to make changes to my pc.  Also, when I click on the option of printing a pdf document, the print window that opens only allows me to "Save" the document not printi TI (the 'save' button is substituted for the 'print' button).  Can I save the document and print then after I opened from my windowssaved file, if the printer is working and will analyze in the screen of the printer associated with the.  This is done via the wireless connection, so it works.

  Hello

  Try following the steps listed below and check if it can help, the steps for Windows 8 is also applicable for Windows 10:

  http://support.HP.com/in-en/document/c03640384

  If this does not help, try following the "printer software installation & screen opens instead of HP printer Assistant" section below:

  http://support.HP.com/us-en/product/HP-OfficeJet-4630-e-all-in-one-printer-series/5305049/model/5305050/document/c04714314/

  About the "print" button, I guess that's not related wit the real software problem:

  Google chrome opens the print dialog box, and then press the button change.
  Select your printer from the list instead of the default save as PDF option and try to print again.

  Shlomi

• HP OfficeJet Pro 8600 Plus: printer apps

  I can't access my applications from the screen of the printer - I get the message unable to connect to the server, check the internet connections.  Internet connections are very good.  I can print emails to the printer and the apps that I have implemented to print every day - they print daily.  It happened for about two months.  Help

  Hey @Buke1,

  Welcome to the Forums of HP Support!

  I understand that you have some problems with the applications on your Officejet 8620 e-all-in-one printer. I can help you with that.

  To start, make sure that the printer is plugged directly into a wall outlet, not a surge protector. Once done:

  1. On your printer, click web services icon in the upper left corner of the screen.
  2. Click settings.
  3. Click on delete Web Services.
  4. Click the new icon.
  5. Click on accept and Yes.

  Please let me know if you are able to access the apps after the above. If you are, click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• HP Officejet Pro 8600 Plus: print jobs get stuck in the impression that

  Documents of any kind stuck in printing (QC) email, print screen, word, excel.  It does not matter.  And it happens intermittently on a daily basis.  I read older messages and understand how to remove the impression that, but I want a solution as to why and how to prevent it.

  Take a look at this HP support page.

• OfficeJet Pro 8600 Plus: printer

  Inserted a new black hp ink cartridge to replace an empty list.  Printer still shows black as ink empty and don't print with black ink. the queries use color to shape black ink.  How can I get the printer to recognize the cartridge is full (Yes, it is full - it feels full and pass when shaken)?

  Thanks for any help.

  Arthur Golubiewski

  Talked to HP and we have done a number of tests.  To make a long story short, it was determined that the ink cartridge was faulty; tried a new one and the printer worked perfectly.  HP sent me a new ink cartridge.

  This is the first time I had a faulty cartridge.

  Thanks for your help.

  Art Golubiewski

• My HP Officejet Pro 8600 Plus prints emails as landscape only; How to assign default A4?

  All of a sudden my printer has implemented printing of emails landscape mode; How to put in portrait as a default value for printing?

  Hi @OB1214 , welcome to the forums there.

  I understand that your emails are printing landscape. If the problem is that when printing of emails, there may be a setting in your e-mail settings to change the print settings.

  If all your programs print in landscape, check the print on your computer settings.

  Changing the parameters of printing from Mac OS X

  Changing the settings to print in Windows 7

  I hope that helps!

  If the problem persists, let me know the details and also what operating system you are using.

  Thank you

• HP Officejet Pro 8600 Plus: I think I need to uninstall and reinstall the printer

  My printer started to print only if I turn it on, then go back on it.  I think I need to uninstall and reinstall the printer.  I have the CD, but not sure of updates.  This all started when my cable company came out to solve my problem of modem and saw that I was running my wireless printer.  He said that I should never do that, so I went back to USB.  When I did, the printer would not analyze.  I've switched back to wireless, but now I have the power problem.  Help!

  Hello

  Try the procedure described in this doc connecting the printer after change of your wireless network.

• Printers HP Officejet Pro 8600: cannot print the PDF for HP Officejet Pro 8600 Premium

  I can't print pdf files. I can print Word and Excel documents. The printer worked fine on my old computer, it's a new laptop from Dell. I installed the wireless printer and had this problem. I then uninstalled all the hp print files and reinstalled like a printer cable and still it won't print pdf even if it will print documents of type word. Thank you for your help.

  Hey @scienceisfun,

  Welcome to the Forums of HP Support! I hope you enjoy your stay here.

  I see that you have some problems with PDFs of your 10 Windows PC printing to your Officejet 8600 Premium e-all-in-one printer. I can help you with that, but as the printer prints other programs on the same computer, this means that the problem is related to your PDF software. I suggest you uninstall your PDF Viewer and install again. If you are not able to print PDF files after reinstalling the software, then the next step would be to contact the company that wrote the software PDF to decide the issue.

  Please let me know if this resolves your problems or if you have any other questions. If not, have a great week!

  If this solves your problem, then please help others find this post by clicking on accept as Solution on my post.

  If you appreciate my help, so please let others know by clicking on the icon below my post thumbs up.

• Scan more OfficeJet Pro 8600: Officejet Pro 8600 Plus resize problem

  With the help of Officejet Pro 8600 Plus to scan documents on computer in PDF format.

  I'm tring to scan a document that contains very important information just at the foot of the page, but when the scanned document appears on the computer screen, I see that he has not captured at the bottom of the original document.

  I can work out how to resize the document to the copy function, but I can't find an option to resize for scanning.

  Nobody knows the answer to my woes?

  Thank you for your help.

  Hello

  Thank you for using the forum.

  You can choose the scan size, example as shown.

  

  In addition, these videos may be useful for you:

  Scanning multiple photos:

  HP Officejet Pro 8630

  https://goo.GL/ADYDmo

  Scanning tips:

  HP Officejet Pro 8630

  https://goo.GL/fjZvqM

  Hope that helps.

• E-mail print Officejet Pro 8600 Plus

  I can't print from email, I can print PDFS and all documents in word or excel, but not email.  I reinstall the software and the same thing happens.  All of the suggestions. Officejet Pro 8600 Plus with Windows 7 using.

  How to access your e-mail?

  * Do you connect to a service of e-mail via a web browser?

  * Or you are using a client such as MS Outlook e-mail software?

  If you log on to an e-mail via a web browser client, then you do in Internet Explorer?  Have you tried multiple browsers to ensure that the problem does not follow?

  I would also try another driver, such as the driver of c 990, to see if it is a driver compatibility problem.  For more information about how to use another driver, see thread of Shane_R found here.  I hope this helps.

• OfficeJet Pro 8600 Plus: HP Officejet Pro 8600 Plus - Can no longer print with my Mac

  I have been using a printer HP Officejet Pro 8600 Plus via my MacBook Pro (OS X Yosemite version 10.10.4) for about two years with no problems until recently.  Since a few days ago, I'm more able to print wireless, despite the fact that the printer is connected to the network.  Interestingly, the print queue reflects the print job completed, but pages do not print.  In my attempts to solve the problem, I have (i) restore factory settings and re-written information of network required on the printer; (ii) disconnected the printer and waited five minutes;  (iii) unplugged and reset the router. (iv) deleted and reinstalled the software and drivers printer on my laptop.  My laptop is in communication with the printer as evidenced by my ability to scan using HP Scan wireless, but I'm unable to print the document once it is scanned.  Finally, I am able to print the network settings Page in the menu of the printer, but not the printer web page... I get an error message saying 'the printer is busy. Try again later.  Any ideas to fix this frustrating problem would be greatly appreciated.  I apologize if my descriptions are not technically accurate because I am a novice when it comes to computers and networks.  Thanks a lot for your help.

  Thank you for your response and suggestions. I really appreciate it.  You beat me to the punch... only a few hours ago, I was able to get the printer working again... but I forgot to update my post.  As you recommended, I have reset the printing system, downloaded a new driver... hpprinterdriver3.1.dmg... added a new printer... restart the printer, my router and my laptop... and the printer from work once again from my Mac.  Yet once again, I appreciate your efforts... Bravo.

• OfficeJet Pro 8600 Plus exemplary prints with black streaks

  I just bought a HP Officejet Pro 8600 Plus and it seems to work perfectly when printing; However, when I tried to copy something, the copy came out with black streaks that close to unreadable printing and are more dark/concentrate toward the left side of the page.

  How can I solve this problem?

  @Imagehappy, you have the more than 8600 or a different version of the 8600?

  The reason for the question is because I want to give you a link to update the firmware.

  Also, do not forget if you can find one of my post useful or want to say thanks don't forget to click the White Star under my name to give me congratulations.

  I really appreciate it!

  Thank you!