HP officejet pro 8610 e: how to change scan folder doc is sent to

Similar Questions

• Country/language printer Officejet Pro 8620 settings - how to change the language to English?

  Country/language printer Officejet Pro 8620 settings - how tdo Ichange the language to English? Thank you! Paul

  Hello

  Thank you for using the HP forum.

  1. go in the Panel controls the printer you

  2. slide to the left and select Setup (the gear icon)

  3. Select Configuration of the printer (in the first line of the menu)

  4. the language is the second line on the list of lists of "printer setup".

  Hope that helps!

• HP OfficeJet Pro 8610: Impossible to activate the scan of the computer, complete the installation of the utility

  I'm not able to activate the analysis of my desktop computer or my laptop. I pedaled power the router, printer and computers, ran disk utility and repair permissions, I uninstalled the printer and reinstalled. I received a message that the installation of the HP Officejet Pro 8610 has been completed successfully, but when he goes then HP utility-Setup-HP Officejet Pro 8610, happens to alerts from HP and I get the error message: "a critical error has occurred. Please restart the application, and then try again ' and I am unable to continue. Download and open HP Easy Start are successful but he opens the HP utility at the end and I get the same message once it arrives to alerts from HP.

  Opening to the high HP utility-HP Officejet Pro 8610 and clicking on scan settings, Scan of the computer initially appears without the box checked to activate this function and the error message: "the computer Scan is disabled. You can always start the scanning of your computer software analysis - for example, HP scanning "." Click on the button to activate the Scan of the computer generates this error message: "error of Communication. Unable to communicate with the device. Check the cables and the connection parameters. If the problem persists, try restarting your computer and the HP device "."

  In the window of the printer, press Scan and the Scan of the computer selection produces the error message: "not found computer. Scanning software HP is required for this feature. If installed, open the HP utility and under settings of scanning, select scan to computer and enable "."

  I tried everything suggested, and what I found online to try.  I'm missing something or not doing something correctly?

  Thanks for any help!

  Hi @3star8,.

  Welcome to the Forums of HP Support! I read your post and see that you are unable to activate the computer option via the software scan. I would like to help you today. If this helps you to find a solution, please click on the button "Accept as Solution" down below in this message. If you want to say thanks for my effort to help, click on the 'Thumbs Up' to give me a Kudos.

  I think that the procedure described in this post, will help solve this problem. Here is the link: Re: impossible to activate the Scan.

  This is the URL of your drivers, e-all-in-one-HP Officejet Pro printer 8610 series full feature software and drivers.

  Please let me know the result and if there is anything else I can help you. Thank you.

• HP OfficeJet Pro 8610: Lost the ability to scan high resolution on 8610

  I was able to scan up to 2400 dpi with my scanner until yesterday, when I upgraded my cable modem.

  The printer must be reinstalled to connect to my home network, and when I started a few scans this morning, the highest available dpi is 300.

  What happened here?  Is there a possibility to acquire the old scanner software that I've used since the beginning?  I do a lot of scanning of the family vintage photo and aid resolution more largely in their cleaning.

  Welcome to the HP Forums, I'd love to help you @unipenguin!

  I see from your description that you could sweep with up to 2400 dpi with your scanner until you have had your modem cable replaced. I understand that you need to reinstall your printer for it to connect again. I know this may sound outrageous, but you may be the source of software updates to ADF? When the charger is selected, the max dpi will be 300, so my thought process.

  If changing the source flat solves the problem, please click Accept as Solution button below. However, if you need more assistance let me know and I will do everything I can to help.

  Thanks, I look forward to hearing back on your part.

• Problems printing to office 2007 - OfficeJet Pro 8610

  I have a new OfficeJet 8610 Pro who don't print from Office 2007 (Word and Excel). Print jobs that are submitted to the printer go into a black hole somewhere and never find yourself in one file printing or to the printer.

  To support cat HP printer driver DeskJet 6980 to allow printing, but I consider that it is a workaround rather than a permanent solution.

  I can print from a web browser form. I can't print a test page with the devices and Sound > devices and printers > HP OfficeJet Pro 8610 (network), but I CAN print a test page for print management > custom filters > all printers > OfficeJet Pro 8610 (network).  FAX and scan to work. I can access the printer through the built-in Web server.

  Suggestions or help?

  My environment: I-7 desktop PC running Windows 7 Pro SP1 with all the current patches. 8610 printer connected via ethernet using the static IP address.

  Printer: driver 13.33.0.2473 software 032.000.090.45518 firmware FDP1CN1416AR

  Fixed a problem. I created a new user (account) Administrator profile and found that I was successfully able to print to the 8610 since all Office 2007 applications.

• How can I change the language on my Officejet pro 8610?

  Today, I got a new Officejet pro 8610. When I walk I accidentally put in place with Arabic as a language. How can I reset it for English - don't forget that everything on the screen is in Arabic. I know that the theory of what to do. I need to go through the Setup and I can recognize the icon for this but what choices to make in the following screens?

  Advice would be welcome.

  p_m_b wrote:

  Today, I got a new Officejet pro 8610. When I walk I accidentally put in place with Arabic as a language. How can I reset it for English - don't forget that everything on the screen is in Arabic. I know that the theory of what to do. I need to go through the Setup and I can recognize the icon for this but what choices to make in the following screens?

  Advice would be welcome.

  I managed to answer my own question. I installed the software on my computer and then connected it by usb. My computer came next with asking me what language and location, I tried - showing the Lebanon and Arabic as the default value. I chose UK and English, and that's the officejet changed language on its screen.

  Panic at the wire. I even beat the HP support counselor who promised to get the Arab Department to advise me!

• OfficeJet Pro 8610: How can I keep my Officejet Pro 8610 fall offline?

  My Officejet Pro 8610 will soon after a print offline job and must be recycled to the wide and turn it back on before it will print again. (says not connected printer) Now, this happens after 16 months of operation. Mac computers and routers are Apple Time Capsule. Everything is wireless. A semi full reset on the 8610. Uninstalled and reinstalled HP software. Restarted routers.  Any suggestions?

  Hi @GLORIATAYLOR,

  Welcome to the HP Forums!

  I understand that your printer always disconnect your wireless network. I want to help.

  You might want to set a static IP address for the printer. This is therefore a document, you can review how to set an IP address: http://support.hp.com/gb-en/product/hp-officejet-pro-8610-e-all-in-one-printer-series/5367603/document/c04082680/

  Let me know if it helps.

  Please click on the thumbs up below to thank me for my efforts! If this post helps you solve the problem that you are experiencing, please click "accept as Solution" so that others who may have the same difficulty can find the answer more effectively. Thank you for participating in Forums of HP!

  Kind regards

• HP OfficeJet Pro 8610: How can I find the address to return a defective printer?

  More than a year ago, we had a HP OfficeJet Pro 8610 replaced due to a defective unit Telec.

  For some reason, we were never able to send the a faulty back to HP, probably because we never received details on places where to send it to...

  We have a case number, but nobody has never detailed how and where send us the defective device to?

  Can someone point me in the right direction?

  Thank you

  HP will usually send a return label prepaid with the replacement unit, so all you have to do is put the old unit in a box and send it back to HP.

  HP usually ask also a number of credit card for security and will charge you for the new unit if you do not send the replacement within 30 days.

  There are also cases where HP will review the old trash of machine and just ask recycle you, but it should have been paperwork indicating that with the replacement.

  I had a few cases where HP has delivered something for me where they want to go back to the old or machine and in almost all cases about three days later, they called to see if I had been there.

  Keep in mind, that I do not work for HP, but I worked with HP hardware for some time now and I think that if you had it for more than a year that she does not need to be returned and can be eliminated.

  If you wish to contact HP, then you look at the support page for your machine and then look for a contact link so you could send them a message and the reference number and ask if you can dispose of the machine.

  If HP wants to come back, they should send you a prepaid return label, they can do it by e-mail.

  If my post is solved your problem and click the accepted as button solution under him.

  In order to thank a Tech for a post click the thumbs up button under the post.

  You can even click on the two keys...

• How to connect the HP Officejet Pro 8610 to a laptop that does not connect to internet

  Just bought the HP all-in-one Officejet Pro 8610 for the local historical society. The laptop and the printer will be connected to the Internet. The printer will only be used for printing reports, scanning images, etc.

  I just removed the instruction manual to familiarize myself with the connection procedure, but I noticed there are several references that require internet access.

  Is there a workaround solution that allows me to install/connect the printer without having to access the internet?

  Thanks in advance for your help.

  Hello

  Given a special environment USB is probably the way to go. You don't need a special USB cable. Your printer has two USB ports, one on the front (#4) and the other at the back. You must use the rear USB port (#13)

  

  And the USB cable is similar to the following:

  http://www.pccasegear.com/index.php?Main_Page=product_info&products_id=25512&cPath=135&utm_source=GoogleBase&utm_medium=CSE&utm_campaign=export_feed&gclid=CJqz96LO-8ECFdglvQodZmkAYA#GoogleBase

  The "flat" end for your computer/laptop and 'round' (well almost round) is for the printer. Please check the box first, depending on where you are (country, region), the cable may already be inside the box.

  Kind regards.

• HP Officejet PRO 8610: No Option "form to tray assignments.

  Hey,.

  I just installed a HP Officejet PRO 8610 with accessory extra tray 2 (A8Z70A) on a 64-bit windows 8.1 computer. The printer is connected. What I'm asking, it's for my users to be able to send legal documents of sizes to the printer and have it automatically pull from the appropriate paper tray. In my case tray 2.

  My problem is that I don't see the "Form to tray Assignments" option on the tab settings of the device that would allow me to set what size of paper the printer would shoot a paper size given, tray 1 or the tiroir2. Grateful for any help.

  I already tried some things:

  Using drivers from the CD provided, as well as on the site of HP

  The upgrade of the firmware (it was already up to date)

  Installation on windows 7

  That's what I see now. The picture at the bottom is the setting for my HP Officejet 8100, which shows what I would see on my page of 8610 settings is to say "forms to tray assignment" options.

  

  Here my HP 8100 settings show clearly how can I assign sizes page for each tray.

  

  Hey @Sharltonagain!

  Thanks for getting back to me!

  There is another work around that can help!

  You should be able to add the printer twice through the window devices and printers.  You can name a 8610_tray1 and the other 8610_tray2.

  Once the printers are named:

  1. Right-click on 8610_tray1
  2. Go to the printer properties
  3. Click on the Advanced tab in the upper part of the window
  4. Click on "Default printer"
  5. Click the paper/quality tab
  6. Change the paper source for the Tray1
  7. Change the media to the desired media
  8. Click apply/OK
  1. Right-click on 8610_tray2
  2. Go to the printer properties
  3. Click on the Advanced tab in the upper part of the window
  4. Click on "Default printer"
  5. Click the paper/quality tab
  6. Change the source of paper in tray 2
  7. Change the media to the desired media
  8. Click apply/OK

  Now the printers is added twice with the default settings for each.  Now when you print, you can choose the name of the printer that you want, and it will print these parameters.

  Let me know if it works out and sorry but I don't know if they do an update or not.

• printer hp officejet pro 8610: new HP Officejet Pro 8610 Plus router network setting locked by admin impossible to reconfigure

  need to change the network settings on officejet pro 8610 more printer but locked by admin settings. Also, I have printed the network configuration page but could not open http://192.168.223.1with browser, connection has expired.  Help, please.

  Hi kimvb,

  Thanks for joining the forum to Support HP for a solution to your problem.

  I understand that you have a HP Officejet Pro 8610 e-all-in-one printer you need to change the network settings on but you can't because it has locked by admin and also, you can not access the Servicer (EWS) Web embedded with the IP address of the printer. I would like to help with that.

  There is a stain on the integrated Web server that you can join the admin settings, but if you are unable to access the built-in Web server with the IP address of the printer there is another way may work around this problem.

  I'll send you a (PM) private Message with reset information that can help. If you are unsure how to check your PMs, click here.

  Please click the "accept as Solution" and the "thumbs up" button up on top of my first response above and other similar issues may find the easiest solution.

• Print reverse Officejet Pro 8610

  I print on an Officejet Pro 8610 ((Windows7 64-bit) and it prints in reverse order.)

  I have hunted everywhere and cannot for the life of me find out how to stop printing in reverse order. What Miss me?

  Help please!

  Hmm... I just downloaded and installed the Officejet Pro 8610 driver for Windows 7 x 64 system and I can confirm that it has no order of pages option.

  You can install another driver which would be compatible with the 8610, but offers more options.  I suggest the driver Deskjet 6980, which can be installed as follows: click on start, devices and printers, click with the right button on the Officejet Pro 8610, properties of the printer, Advenced, new driver, Next, Windows Update, (wait a few minutes to appear in the update list), select HP (Hewlett-Packard) for the manufacturer, then HP Deskjet 6980 series (HP) , Next, Finish, general, Type a new name for the printer - it will be changed for HP Deskjet 6980, you probably want to go back to HP Officejet 8610, apply, OK.

  Order of pages can now be set in the Advanced tab.

• OfficeJet Pro 8610 do not print documents to MS Word

  Hello

  I am owner of an all-in-One 8610 Offijet Pro. It was working fine until this day. Suddenly he stopped printing MS Word 2007 documents. It works fine with other applications (Acrobat, Autocad, etc.).

  I've uninstalled and reinstalled the drivers several times, used HP difficulty application, used the application microsoft Fix, I tried printing on Office 2013, but nothing happens.

  Whenever I try to print a .doc I get a page with a code on it and another filled with dark horizontal lines.

  Hey @Fatalouch,

  Welcome to the Forums of HP Support!

  I would like to help you today to resolve printing problems that you are having with MS Word documents when printing to the printer all-in-one HP Officejet Pro 8610. I understand that you already have many of the recommended troubleshooting steps, and I thank you for all the information, including in your message. I'll suggest a few steps additional troubleshooting here. I know that you have already run uninstall it and reinstall your product several times, but please run the step-by-step instructions below:

  Step 1: Uninstall the drivers:

  Because you have not specified what operating system you use on your computer, I'll provide you with the document on how to uninstall properly. Please click on this support document and simply choose the operating system you are using. If you are unsure about what your operating system, refer to: what is my OS?

  Uninstalling the printer software

  Step 2: Delete the Temp folder:

  1. Open your Start menu and in the box "search programs and files", type %temp% , and then press enter.
  2. When the Temp folder opens, select Ctrl + A at the same time on your keyboard
  3. Once everything is highlighted in the Temp folder select "delete" on your keyboard to delete the files in the Temp folder. No files and folders on your computer will be deleted. This only deletes temporary files. If a file is always be used by a program on your keyboard will rise pop to 'jump' the item.
  4. Once the temporary files are deleted to close the window
  5. On your desktop, right click on the recycling bin and select empty recycling bin

  Step 3: Reinstall the drivers:

  Please select the link below to download the appropriate printer drivers:

  E all-in-one HP Officejet Pro 8610 Printer series full feature software and drivers

  Once you download the driver package allow the download to run.

  1. The installer gets to 100% and then launch the installation screen
  2. Do run installation instructions step by step to reinstall your printer
  3. Once the product is reinstalled correctly, proceed to the next step.

  Step 4: Change of driver:

  Now that the correct driver is reinstalled I'm going you have change the pilot of another driver for the Officejet 8600 series which should solve this problem.

  Please select the following link for the driver: HP Officejet Pro Basic print and scan Driver

  1. Allow the driver to download it and run it
  2. Once extraction is complete the installer can launch, please close the window installation
  3. Go to your Start menu and in the "search programs and files" box type % temp % and click enter
  4. Once the Temp folder opens, click the newer 7z folder. It should include OJ8600 or OJ860 files in what it says.
  5. At the top of this file, you will see the path to the file. It may show something like "computer - local disk c-users appdata - local - Temp - 7z...'.
  6. Make a left click on the right side of the path of file at the top bar and everything should highlight in this bar. Then right click on the bar and copy the path of the selected file.
  7. Close the Temp folder
  8. Click on the start menu, then select devices and printers
  9. In the devices folder and printers, click with the right button on your Officejet 8610 and left click on printer properties
  10. Left click on the Advanced tab
  11. Left-click on new driver
  12. When the new window driver opens just hit 'next' until you see a list of manufacturers on the left and a list of printers on the right.
  13. Click the "disk" button at the bottom right
  14. When the "Browse" window opens, simply right click in the path of the file bar and select "Paste" to paste the path of the file that we copied earlier. Click OK.
  15. When prompted choose the 8600 Officejet printer and click Next until the pilot add windows close.
  16. Under the printer properties window, select 'Apply' but do not hit OK
  17. Select the general tab
  18. Rename your printer in HP Officejet 8610
  19. Click OK

  Now, try to print from MS Word!

  Please let me know if the other pilot solves your printing problems. Should you still be questions be sure to meet with your operating system so that I can further steps offered. Good luck!

• HP Officejet Pro 8610: HP 8610 - check printing order

  HE CAN NOT FIND 'SWITCHES' TO CHANGE THE PRINTING ORDER.

  Control Panel

  ... Devices and printers

  ... right click on the printer icon

  ......... Printer preferences

  NO option to change the order of printing on any tab

  QuickBooks Pro

  ... File

  ...... Printer installation

  ......... SHAPE: Check/cheque

  ............ Options

  NO option to change the order of printing on any tab

  This option existed.  What has changed?

  Deskjet 6980 driver is compatible with the Officejet Pro 8600 series (including the 8610) and provides the order of the pages, but also of the other missing features of the Officejet Pro driver 8610 including:

  • Order of pages
  • Resizing options, including the page scaling in percent or adjust.
  • County of copy (with Assembly option)
  • Image mirror (for printing T-Shirt transfer or stickers)
  • Watermarks
  • Tip of color (the color, Saturation and brightness, the individual sliders for CMYK tone)
  • Overspray
  • Drying time

  The Deskjet 6980 driver can be installed as follows (the instructions are for Windows 7, other versions would be similar): file devices and printers, click with the right button on the Officejet 8600, select Advanced, new driver, Next, properties of the printer, Windows Update, wait a while for the page to refresh, and then select the driver HP Deskjet 6980 (HP), OK.  It may be desirable to change the name back to Officejet Pro 8610: right click on the printer, the printer, the general properties, type the name of the desired printer, apply.  While, it may be necessary to activate the duplexer: click the device settings tab, set the duplex unit installed, apply, OK.

  Install another printer driver will have no effect on scanning applications.

• OfficeJet Pro 8610: print legal size document

  Is it possible to print a document on legal size paper on the Officejet Pro 8610 printer?  If so, how can I do or where can I find instructions?  I need to print an excel document and may take up to print, but do not know how to load the paper.  The tray is too small.

  @jaztenor

  Theuser's Guide (Chapter 2, Page 24) explains how to extend the tray for legal size paper.

  NOTE: To load legal-size paper, press the blue latch located bottom left of the status bar of entry and
  Deploy the status bar.

  

  Printing preferences to specify the printer paper that you use.

  Paper size and Media Type:

  Control Panel > display icon > devices and printers > click on your printer >

  Printing preferences > paper/quality tab

  Reference, suggestions and examples:

  Printing options

  

  According to the program / browser you use present it the print job, you can reach the printing preferences in preview before printing.

  Example - Firefox:

  Browser > file > (click) Print > properties (open printing preferences)
  

  Reference, suggestions and examples:

  Manage the print with preview output before printing

  When you see a post that will help you,

  Who inspires you, gives a cool idea,

  Or you learn something new.

  Click the 'Thumbs Up' on this post.

  My answer-click accept as Solution to help others find answers.