HP OfficeJet Pro 8625: Unable to print wireless with a laptop.

Similar Questions

• OfficeJet Pro 8625: Unable to print in b & W

  I remember being able to print with a choice.  Now it seems that I can only print in color.  I remember having given a choice to choose B & W or color on the preview screen before printing.  I don't see that now.  Hope you can help.

  I see what you say @HbgBill.

  I played around with the drivers and you can see that depending on which driver you use the black and white option is located at different locations. Let's go back and remove the printer again and add using the driver AirPrint.

  

  With AirPrint driver, you will have black and white, announces two-sided option right next to the copy.

  Please let me know if that solves the problem.

• OfficeJet Pro 8625: HP8625 sleep mode/wireless network connectivity

  I recently bought an OfficeJet Pro 8625 and it worked fine for a few days, with everyone in the House, being able to print wireless connection network (Verizon FIOS via an Airport base station).  However, now it won't keep (or restore) a Wi - Fi connection after going to sleep.

  I can get the printer to work, if I turn it works, then immediately print (but only one machine... If I need to print from two different computers, I have to restart again to use the second computer).

  This is the case for all computers in my house - using several OS X (El Capitan, Mavericks and Snow Leopard) and the other with Windows 10.  I tried the troubleshooting tips that I could locate, and the firmware is up to date.

  I should be able to send a document to the printer from anywhere in the House, from any computer, without walking to the printer and restart it first.  A network printer should be sprained able himself, reconnect to the wifi and print jobs sent to it, but mine doesn't.

  How can I solve this problem?

  These settings are to set up your wireless printer to stay connected to your router, wireless devices stay better connected and makes your router secure and hack proof.

  While the DHCP is convenient, devices like printers must always be assigned an IP (fixed) manually to avoid conflicts on your wireless network.

  1. Set a static in the printer IP address (click here) outside the range of the DHCP of the router (check your manual). It is for Linksys routers, but can be used for all routers. Check your DHCP range and change this first if necessary. More Help Wireless Printing is here (Windows solution 4, static IP).
  2. Or check in the printer "Auto off" is disabled the System Mode Time Out is set to zero (0) Use the built-in webserver (EWS) by visiting the printer address IP address in the address bar of your browser, click on settings tab/Auto Off. Or use the printer, printer Home Page (EWS) Wizard. Also check the properties of your printers.
  3. If the printer supports and has IPv6 enabled, disable the IPv6 option in the printer.
  4. If necessary and you have assigned a static IP address, try using auxiliary for the preferred DNS Server 8.8.8.8 and 8.8.4.4 as DNS server.
  5. Wireless printers work only on the 2.4 Ghz band.
  6. Make sure the printer is on the latest firmware by checking with the HP support site.
  7. Check all devices wireless in your home for interference. Check microwave, babyphones, phones, wireless and wireless alarm systems are a big culprit. Any of these will knock at your printer wireless intermittently.
  8. Make sure that your printer and router are at least 6 feet, independently of the other.

  In the router: (refer to the manual of your router for more information)

  1. Use a fixed wireless channel as the 1, 6 or 11, never 'auto', try channel 1 first then the rest.
  2. Set the router to 20 Mhz only or 145Mbps router function.
  3. Always use WPA2-AES encryption (personal), but you can try the "mixed" mode
  4. Disable the WPS and never use it and disable the UPnP for the security of routers. No one can hijack your system now and help with wireless connectivity (if you want to know why, research on the web).
  5. If you have a router dual band (2.4 Ghz and 5.0 Ghz bands), make sure the SSID is NOT identical, they must be different for all the bands, even for networks without comments.
  6. SSID broadcast should be enabled.
  7. Save all the settings. Food at the same time, wait 2 minutes.  Power on router wait 2 minutes.
  8. Marketing the printer and check that it reconnects to the router.

  Windows 7/8/8.1 is discovered the system on or off?

  1. Control Panel/Network and Internet/network and sharing Center / advanced sharing settings.
  2. Under home or work (current profile) / network discovery.
  3. Select "Turn on network discovery" and save the changes.

  Now last thing to do once everything above has been tried and you still have the same problem, completely uninstall and delete the printer and its software.

  Use http://www.iobit.com/en/advanceduninstaller.php and powerful Scan at the end.

  Now go back and reinstall the drivers and full software on the HP website.

  Last resort effort - if your printer has an Ethernet connection, suggest you to get some adapters line and convert your Ethernet wiring for your printer.

• HP Officejet Pro 8600 N911g cannot print wireless AirPrint or desktop/laptop

  Hello

  My systems are all running Mac OS X 10.8.2 (Mountain Lion). I have a Linksys E4200 configured for 5 GHz Wireless-A and 2.4 GHz Wireless-G. For testing purposes, I have firewall of the router disabled.

  Here's what I CAN do:

  -connect to the Web server for the printer (printer is correctly connected to the wireless network)

  -print using ePrint (printer running mechanically)

  What I can not do:

  -Install the printer in OS X

  -printing of my office/computer systems portable

  -printing of my devices via AirPrint

  I tried the following:

  -reset the network settings on the printer

  -restart the router

  -restart all systems

  Error messages:

  -System preferences print & Scan shows the printer as "near printers: Officejet Pro 8600 [CBE189].

  -in installation "settings until 'Officejet Pro 8600 [CBE189]" configuration of the device... ". "returns with"Unable to communicate with the printer at the moment"and I have to cancel installation

  -When printing using iOS devices, I can choose the printer, but any print job expires.

  Any help would be greatly appreciated!

  Thank you!

  Too bad! Solution found - unplug the power cord, wait 30 seconds, plug it in again. Pop, it works. (So old-school)

• HP Officejet Pro 8610: IMPOSSIBLE to PRINT GMAIL WITH NEWLY INSTALLED HP OFFICEJET PRO 8610 wireless

  All documents from my computer of fine print using the 8610 wireless.

  However, if I try to print any GMAILs, nothing happens.  I checked I have the selected 8610 as default printer and the printer has the correct documents ready, but nothing happens.

  OK, let's check how Chrome is set up to print.  (I also have a 8610 and easily print chrome!)

  Open any page.  Either type CTRL-P or open the Menu and select 'print '.  Another page should open with the printing options.  What do you see?  Your printer to display by default, or "Save as PDF" by default?

  Look at the field "Destination".  Just to make sure that you have selected the right printer, click on the "Edit" button, then see "Local Destinations".  Click on the "Manage" link to see all available printers.

  Remember that the right pair has been selected.  Mine shows that "HP Officejet Pro 8610 (network)" and has the green check by default.

  Something is not right to install in Chrome.  Worst case, we can uninstall/reinstall Chrome it!

  WyreNut

• HP Officejet Pro 8600 more N91: Printer crashes with 0xB845D7DC when connect to UPC Ubee cable modem/router EVW3226

  Printing: HP Officejet Pro 8600 more e-All-in-One Printer - N911g

  SN: [personal information]

  REF: CM750A

  FW: CKP5CN1516AR

  Then try to connect to the router wireless (active DHCP), the printer LCD display starts to blink and a second, it displays B845D7DC.

  After that, the printer asks to reset and it restarts with wireless off.

  I have a cable modem with router wireless of my cable TV UPC provider called UPC Ubee EVW3226.

  I tried to connect the printer to the router using the WPS button and provide the password. In both cases, I have the same behavior.

  I have a dozen other wireless home devices that connect without problem to the router. But not the printer.

  Please let me know what other information will be good for you to solve the problem. Or, please provide a workaround solution.

  I found the solution:

  connect to your printer cable (you can use a direct eth between your computer and your printer cable), access the web interface and disable support IPv6 (let the IPv4 only verified): network > General > protocols > only IPv4 verified. Save and restart the printer.

  In 80% of cases, it will work on the wireless connection. For the other 20% when it does not work, try to assign a static IP address to your printer (network > Wireless > IPv4) in a second time. Take data from your router (IP, gateway, DNS).

• Make the OfficeJet Pro 8500 A909 series printer compatible with Windows 7 (64-bit)

  I was right, but he started from.  Could you please send me the link to make the printer compatible with my computer Windows 7 (64 bit) OJ Pro 8500 A909 series?

  Thank you

  The second link contains the complete driver giving you access to all the features of the printer.

• Printer does not print wireless with a laptop

  I just got the B210A Photosmart more for Christmas and it is all set to print wireless from all the computers in my house except my Dell laptop running Windows Vista home Edition.  Everything says it connects and work, but I'm unable to print.  I just get an error message.

  The only thing I am able to print wireless is when I open the Web page the printer by typing the IP address and choosing to print a test page.

  All the diagnostic tools, I downloaded everything that the printer is connected and works well.

  I tried to uninstall and reinstall again.  Nothing works.  I also have one Mac and a Dell desktop that so many very good wireless printing.

  Help, please!

  Have you tried to disable the firewall of your security system?  Have you deleted and added the printer in Control Panel?  If this is not the case, do it in this way:

  1. make sure the printer is on and connected to your network. Verify that you can access the printer's internal web page by accessing its IP address before continuing.
  2. click on > start > Control Panel > printers.
  3. click on add a printer
  4. Select local printer
  5. Select create a new port and select Standard TCP/IP Port, and click Next.
  6. under device type, select TCP/IP Device. Under the name of host or IP address, enter the host name of the printer (found on the network printer configuration report the generated above). Click Next.
  If you get a message about required additional Port information, then the printer is not found using the host name. You can go back and start over or using the IP address of the printer instead of the host name.
  7. Select Hewlett-Packard in the list of manufacturers and select and select your printer model. Click Next.
  If your printer model is not in the list, then select disk provided, browse the CD that came with your HP printer and select the first file begins with hp and ending with INF. click Open, then OK. Select your printer model. Click Next.
  8. If prompted, use the driver that is currently installed.
  9. He will ask the name of the printer - enter a new name or use the one existing. This will be the name of the printer that you select from other applications.
  10. we may ask you to share the printer. Make a choice and click Next.
  11. the printing area of Test Page is displayed. Go ahead and print it out.
  12. click on finish.

• OfficeJet Pro 8625: scan-to-print

  How can I set up 'Scan to print "?

  Isn't the same thing as copying?

  Place the document to 'print' on the glass of the scanner and click "copy."

• HP Officejet Pro L7580 - no black printing or with stripes

  My printer does not print in black and white pages. Or if my printer prints black pages, there are scratches on.
  There is no problem in color. When you print a self-test diagnostics page, does it in color, indicating no problem.

  I've already replaced the printhead, cartridges. I've lined up, printhead, cleaning...

  Anyone know what to do?

  Solution! :

  I found it strange that the printer does not work. HP provides good material. I thought, there must be a solution. I found the solution. This solution, I want to share with everyone.

  I don't have one, two or three times to do it, but more than 10 times the next steps. Whenever there was a small improvement. And after a dozen times the result is perfect.

  Follow these steps for the solution:

  (A) once. Maybe not necessary. But it can't hurt.

  (1) institutions.

  (2) tools.

  Okay 3).

  (4) restore default.

  (5) okay.

  (B) more than 10 times.

  (1) institutions.

  (2) tools.

  Okay 3).

  (4) print head cleaning.

  (5) okay.

  (C) more than five times.

  (1) institutions.

  (2) tools.

  Okay 3).

  (4) calibration.

  (5) okay.

  (D) more than five times.

  (1) institutions.

  (2) tools.

  Okay 3).

  (4) align the printer.

  (5) okay.

  --> Alignment failed. HOWEVER, alignment is complete.

  (6) okay. (If 'Alignment is complete.')

  Good luck with it!

• HP OfficeJet Pro 8625: Update was downloaded now, when I hit print I get 'Send Fax, HP OfficeJet Pro 8620' window

  My HP OfficeJet Pro 8625 newly purchased printer was printing fine until I downloaded an update online. Now when I try to print I get the "Send Fax - HP OfficeJet Pro 8620" window. I have not selected the correct option on the update. I do not use nor I set up the fax on my computer or a printer. How can I fix this problem?

  Hello

  In Control Panel, select devices and printers.

  Right-click on the printer 8620, and then select set as default printer.

  Select the printer listed without 'Fax' in its name and confirm.

  The application used to print as if sure you select the print queue that does not include 'Fax' in its name.

  Shlomi

• OfficeJet Pro 862: Officejet Pro 8625 not print wireless

  Printer worked and printed wireless for a few months and then all of a sudden it stopped being able to print wireless.

  Everything seems correct, wireless connection, print test paper, etc.

  But when I print a word file of MS office since T430 victory 8.1 portable, the printing pool show status 'Impression' and then disappeared. In the Officejet 8625 Panel, there is a "Print report" message flashed in very shot time. Then nothing happans.

  I tried to reinstall the printer, use the HP printer help and HP print and Scan doctor, even check the status of the printer in Web Serive printer, everything looks Ok. In the embedded Web server, tools-> Magagement job-> Job Monitor, the stutas of work says 'done '.

  Any ideas on how to solve this problem?

  Hey @ziyoo,

  Welcome to the Forums of HP Support!

  I would like to help you to solve the problem that you are experiencing when you try to print from your computer Windows 8.1 wireless to your HP Officejet Pro 8625 e-all-in-one printer today. Thank you for all the troubleshooting steps you tried before reaching out for support. Right now, I don't think the wireless printing problem that you are experiencing is caused by your printer or your network connection. On the contrary, I believe that the wireless printing problem is caused by your operating system.

  Recently, Microsoft has released a hotfix to correct network printing issues in their Windows 8 and Windows 8.1 operating systems. These wireless printing problems consist of 'partial printing' and questions 'offline '. The questions seem to affect several brands and models of wireless printers. Can I have it please click here to download the fix. Once the site opens, please click on the available hotfix downloadbutton. Please follow the prompts on the screen to install the hotfix. Once the hotfix has been installed please try again to print.  If printing still does not work you need to restart your computer to allow the Hot Fix to take affect. Once your computer turns please try again to print.

  Please reply to this message with the result of your troubleshooting. Good luck!

• HP Officejet Pro 8625: I am able to print from windows, but not able to print from Word

  I installed an HP Officejet Pro 8625 wireless to my network.  I am able to scan from my computer and print from Chrome, but am not able to print from Mozzila or Word.  I replaced a HP Officejet 6500 with this device.  I can print from my mobile devices.   Any help would be welcome.

  Hello

  I found the answer to that by trawling for ever, it IS a HP PROBLEM, ARE YOU listening TO HP?

  the fact is that the printer driver will agree that a system administrator to print from some programs, Adobe, Office, Wordpad there more, but if you apply this fix, they will print

  go to the HEART control PANEL > USER ACCOUNTS > CHANGE USER ACCOUNT SETTINGS.

  Drag the slider to the bottom never notify, and then restart your computer.

  works on windows 7

  Indeed, you raise your account to an admin sys, but if HP has got their act together, they would sort this issue, because it is everywhere in their forums.

• OfficeJet Pro 8625: Remove printer OfficeJet

  I need to remove a printer HP OfficeJet Pro 8625 (8620) laptop.  The printer is a shared Ethernet network device.  I guess I have to remove both the printer itself (via Control Panel) as well as the associated software (drivers HP).  What is the correct order for this (first remove the printer or remove the first HP software)?  Is there anything else I need to do?  I want to completely remove the OfficeJet from the laptop, as it was never there.  I then reinstalled the printer from scratch on the laptop.

  Thanks for your help on this issue.

  Hello

  First remove the HP software from the control panel > Unisntall a program.

  Removing software will remove probably any existing device as well.

  Only if a queue of the remains of printers and printer peripheral slot select Remove an instrument to remove.

  Kind regards

  Shlomi

• OfficeJet Pro 8625: Officejet Pro 8625 - print preview is not available

  I just bought the Officejet Pro 8625. My last 2 HP printers had a preview option print that I can put by default, so I can listen to excerpts or my custom print job to afford to cancel or specify if necessary pages. Now, I'm wasting paper and ink not knowing how the work will look like before committing the print job. Miss me that it allow me to preview before printing? HP has a software update to resolve this issue, or they didn't neglect it? Why they would remove this option? I can go back and is no longer buy HP products more because of this.

  Hi @troendlyj,

  Welcome to the HP Forums!

  I hate to be the bearer or bad news, but I think that's going to be the role here today

  The feature print preview in previous versions of the software is more included. Some programs may have built based on preview before printing for you to use, but if not it not there no other option available from the printing software preview.

  I hope that answers the question, even if it wasn't the answer you were hoping for!