HP OfficeJet Pro 8740: How-to: printing without margins

Similar Questions

• HP OfficeJet Pro 8600: How to print on paper of custom format with Officejet Pro 8600 for Windows 10

  Problem: Cannot create a custom for HP Officejet Pro 8600 paper size

  Found a solution for Windows 7, but I need this same problem solved for Windows 10...

  The solution: 'Using pilot Deskjet 9800 to set a custom paper size to print for Officejet 8600' worked very well for me on a Windows 7 machine...

  However, the HP Deskjet 9800 driver is not available for Windows 10... you have another driver I can use that would work with Windows 10 and which is compatible with the HP Officejet Pro 8600... ???

  Hello

  Use the HP Deskjet 6940 as another driver, if it is not listed under HP it appears after clicking the Windows Update button in the Add Printer dialog box:

  1. Right-click your printer 8600 and select printer Ptoperties. A note which port is selected under Ports.
  2. Click Add a printer.
  3. Click on 'the printer that I want isn't listed.
  4. Select A Local port or a netowrk with manual settings.
  5. Select the port used by your printer.
  6. Select HP
  7. Select HP Deskjet 6940
     Note: Click on Windwos update if it is not listed under HP.
  8. Fill the wizrd and 6940 driver allows you to print a document custom formats.

  Kind regards

  Shlomi

• How to print without margins/marginless/full page on 8.5x11inch with HP Deskjet 3050 J610 letter paper?

  Hi, I tried to print a PNG image in painting, I did on my HP Deskjet 3050 J610 without lines or borders. This is a fully colored picture and I'm trying to get it to reach all ends of the page, so I can print without ANY white on the page at all. Thanks for the help!

  Hello

  The printer is not supported boderless at all.

  Kind regards.

• OfficeJet Pro 8610: New printhead - printed without using the installer cartridges - want to use

  Has had a chance to offer a new free printhead when one would not accept my new replacement ink cartridges.

  Didn't I have to use new ink cartridges supplied with the new print head. On the contrary, kept all the cartridges no-SETUP, that I had just bought. Printer accepted them and printed a huge amount of things. Some of the prints seem too dark. Now the printer asks to change the cartridges and will not accept the cartridges SETUP.

  (1) is my printer not configured correctly because I haven't used the SETUP with the new print head cartridges?

  (2) is it possible that I can get the printer accepts CONFIGURATION ink cartridges so that I don't have to lose their?

  If the printer did not print installing cartridges and now you want to use them, it will not accept them. I'm sorry. Replace ordinary cartridges.

• Print without margins, HP Officejet 8600, Mac

  I'm trying to set up my HP Officejet Pro 8600 Plus to print without margins. I use a Macbook Pro OS X Version 10.7.5 can someone please tell me how to proceed?

  Hi Lotusgirl,

  With the MAC only change this setting is when the print dialog box appears.

  Thank you

• Cannot get OfficeJet 6700 to print without margins on Mac Mavericks

  I can't find a setting in the printer driver to select the printer without borders. Where it is. (Please note that this is on a Mac, not Windows.)

  Hi Surveyman,

  I understand that you have an Officejet 6700 and are wanting to know how to print without margins. I can certainly help you with this!

  I worked in the preview, but I took a few screenshots to help us to if you were to open your photo in preview and then go to file and print, you will see the window below and will want to click the size of paper set in the red rectangle here.

  

  Once you have clicked that you'll see all options available to you and you paper size notice that many of them have a small black arrow next to them, because he has more options will associate with that size. As you can see in the screenshot below, if you click 4 x 6, you will then see the option borderless 4 x 6.

  

  I would like to know how it goes for you!

• Print without margins

  I would like to know how to print without margins.

  My printer (Brother MFC-J6920DW) peut print without margins .pdf made by others and also prints borderless of OS X Photos. It makes me quite confident for the driver or printer are the problem, even if the brother helpdesk said «We cannot print without margins on Mac»

  When I try to print directly from for example Mail, Illustrator, Photoshop or an Illustrator is open in preview, .pdf printer driver preview will display a thumbnail preview without borders, but no matter what settings I use, printing will be always a border of 3 mm / 1 / 4 inch around the edge of the paper.

  How can I fix it?

  Do you have a solution to this problem, I recently have a problem too.

  Previously, I ran on the same machine you without borders of Macbook.

• OfficeJet pro 276dw printing without margins

  OfficeJet Pro 276dw will not print image without border on any other than 8.5 x 11 paper. How do I eliminate the margins for printing of good bordedless on smaller paper sizes? It isn't even an option to select the paper "borderless 4 x 6 or 5 x 8". Only the standard 4 x 6, 5 x 8 are available.

  I'm sorry, but to get your question more exposure I suggest posting in the trade forums since it is a printer. You can do this with multifunction and all-in-one. Click new message.

  I hope this helps.

• OfficeJet Pro 8600: Advanced Document settings don't show option for printing without margins

  Hi people,

  I am trying to print a document created in Microsoft Word 2013 (Windows 8).

  I am also able to create a .pdf file for printing from Adobe Reader XI but have the same problem.

  The paper is 8.5 "x 11" (but in the landscape) and contains texts and photos.

  I want to print on HP Professional Laser Premium presentation paper (8.5 "x 11", glossy).

  I want to duplex print on both sides of the paper.

  I want to print without margins.

  I have a printer HP Officejet Pro 8600, which has the function of borderless in duplex printing (according to

  However, when I go to the 'Advanced Document Settings', I don't see the menu option for "borderless printing.

  I have the size set on "Letter" paper and paper type is set to "HP Brochure paper 180g glossy paper".

  The manual says that this printer supports 'Edge to edge letter' to the duplexer.

  My printer driver is not correct?

  I would be grateful for any help.

  Thank you

  -Dan

  Used the class Windows 8, download the full driver or HP basic driver.

  

• Now my HP Officejet Pro more will not print Photos or anything else!

  Here I am once more.  I finally solved the problem that I had been downloading the software for my HP printer after that I downloaded Windows 10.  I could not download any software without getting an error message 'download cancelled '.  I was able to print pictures and letters typed with WordPerfect X 6.  I'm embarrassed to say that I accidentally fell into the solution and now I can scan, send faxes again.  Yay!  Problem is NOW, I'm more able to print photos, or anything else!  I go through all the motions and send the message to the printer to print, but nothing happens.  I have already run the hppiw.exe and configure the printer.  When I try to run the HPPSdr.exe, he unzips the file, the printer appears as "installed" and click on the 'Next', I get a screen with 3 different ways to connect the printer to my computer - I choose USB because it'S the way I was connected.  Then I get a message telling me to do that my printer is on (it is)!  and try a different USB port (I have) or try another USB cable (I HAVE!)  OK, so FINALLY I get to the point where I am able to print on a HP Officejet Pro 8600 N911g series Print Page of Diagnostic quality, AND DOES IT!    But I also know there is a problem with the software and I need to uninstall and click the Support link and the Driver to download new software.  But when I click on the link, I'm told I'm not connected to the internet - here we are again.  I'm exhausted.  I am 65 years old and I've been at this for 96 hours.  I've corrected the problems of scanning, but now I can't print while yesterday I was able to do it!   Arrrrggggghhhhhh.

  Can someone tell me why I get the message 'not connected' when in fact I AM connected to the internet?  sigh/smh

  Hi @Galego,

  Welcome to the HP Forums!

  I see that you can not print with your HP Officejet Pro 8600, on 10 of Windows, and I'm happy to help you!

  Please, try the steps in the following order:

  • Uninstall the software. Uninstalling the printer software.
  • Unplug the printer USB cable.
  • Clean boot the computer. How to perform a boot in Windows.
  • Disable all Antivirus programs. Disable Antivirus software.
  • Disable all firewall programs. The WF of end-to-end.
  • Create a new user account. Management of user accounts and connections (Windows 10).
  • Reinstall using the printer HP install wizard for Windows. (Wait for the software to tell you to plug in the USB printer cable).

  Then, run the HP print and Scan Doctor to verify that everything works.

  I hope these steps help!

  If this, or one of the posts on this thread, helped you to solve the problem, please click 'Accept as Solution' said post. To show you 'like', or that they are grateful for my post, please click the thumbs upwards below. If there is anything else I can do to help, please don't forget to let me know!

• HP OfficeJet Pro 8740: HP OfficeJet Pro 8740: settings to copy: an error has occurred. (pgCopyConfig-409)

  Hello!

  I'm changing the default bin used for print on a HP OfficeJet Pro 8740.

  The Server Web integrated to settings-> settings of copy / print-> copy settings-> selection of the status bar

  I change 'Default tray' in ' Tray 1 "to"tray 2"."

  After hitting "Apply", the following error message appears:

  An error has occurred. (pgCopyConfig-409)

  Click 'OK' to go back.

  What's not here?

  See you soon,.

  Wolfram

  Hi @wschlich

  Thanks for your comments.

  When you define the settings of copy of tray 2, it will be for this post only (unless your default tray is for copy 2 tray)

  Here's how you can win your copy of employment "continuously" starting from tray 2, follow these steps:

  

  Select the 'Setup '.

  

  

  

  

  

  

  

  

  Try to copy again, he should "stick" to tray 2

  Hope that helps!

• OfficeJet Pro 8100: Officejet Pro 8100 won't print color after update software on Mac

  I have a MacBook Air with OS X (Yosemite 10.10.3)-.

  When I connect the printer via USB, I was able to print by using the generic drivers on the machine. However, as expected, update software detected an update for HP drivers - I installed.

  And now the printer does not print in color. I checked every setting I can think, but it is still printing in black and white.

  Any help would be appreciated!

  Welcome to the @mandikayencforum!

  I have read your current position and the previous thread on how you were not and are not able to print in color from your Mac running 10.10. I saw that already test pages were color printing and would like to know if the test always pages print in color. If they do, a matter for the Mac somewhere, and I have some suggestions for you to do below. If the test pages no longer print in color, please let me know! If the printer is not printing in color when you print test pages, there is probably a problem of cartridge or printer hardware problem.

  1. follow the same steps of @Waterboy71 on your other thread here to reset the permissions system disk and repair of printing: Re: Officejet Pro 8100 refuses to print color (OS X 10.9)

  2. If you still do not have the ability to select the color printing on your Mac, try the procedure described in this post from wisgirl64: Re: won't print in color from my Mac or iPhoto for HP photosmart D110

  If you find that the color print test pages, and the Mac does not give you the options to choose color printing, I suggest getting in touch with Apple support experts to see if they can help fix the problem of the OS X.

  • Apple support communities

  If you like my answer to you today, click the thumbs up below!

  Happy Friday!

• my hp officejet pro 8600 won't print from my ipad.

  my hp officejet pro 8600 won't print from my ipad. ?

  Hello

  Yes.  Try following the instructions here http://support.hp.com/us-en/document/c02623193
  If this does not help, let me know and I'll see what I can do.

• DeskJet 2050 all-in-One - J510: how to print without borders?

  I try to print my project on paper to A4 borderless, but it seems that no matter how to change settings, the results still had a border. Can someone give me some advice on how I could solve this problem?
  
  I print on Word, and my printer is HP Deskjet 2050 all-in-One - J510a.

  Hello.

  The deskjet 2050 printer does not support printing without margins, as you will find by notebook loads below:

  Without borders: No.

  http://h20195.www2.HP.com/v2/GetPDF.aspx/4AA1-1465EEE.PDF

  This material allows to print only to a certain margin.

  The lower border is 0.57 ", the top border is 0.06 'and the left and right borders are 0.125. any impression beyond these margins is cut off due to the limitations of harware.

• OfficeJet Pro 6830: REPLACEMENT status print Officejet Pro 6830 says no Ink/toner

  Received a replacement Officejet Pro 6830 due to print head problem - new printer will print live but will not print a Microsoft Word document: status says no toner/ink.  Any ideas?

  Hello

  Please download and run the HP print and Scan Doctor www.hp.com/go/tools