HP p6-2464eo with the startup problem!

Similar Questions

• Help with the startup problem. Start load page never stops

  This morning, I found a window on my PC (vista home prem SP 3) who said he had a problem with my departure upward. And that characteristic fixed departure could not fix it. I tried to restart my PC and he had charge green/starrt infinite loading bar. I tried to start in safe mode, but can apparently do not have start that is. I grabbed my system recovery DVD, tried to have either boot with the DVD or are looking for a repair-start feature. But when I try to start from the DVD he wants to restore then only of factorry. Did I miss something there at - it something I can do? I don't want to do a restore with since I have given, I don't want to lose and he's going to take me with all my software and udates about 1 week at least for good install and configure my PC.

  Hi Henry,.

  ·         What is the exact error you see on the screen?

  ·         You did changes to the computer before the show?

  Check to see if the following is useful.

   

  Method 1: Remove non-essential external devices and reboot the computer.

  Method 2: Repair of the boot from WinRE (Windows Recovery Environment) mode. Follow the article mentioned below, to do.

  Startup Repair: frequently asked questions

  See also:

  What to do if Windows does not start correctly

• S271HL - demand guarantee, she needed no repair - I'm back with the same problem

  Earlier, I sent a S271HL monitor for repair under warranty.  The issue was that the screen would not activate and the only thing that happened was an orange power flashing instead of a constant blue button button.  The problem is that I got, with the same problem that I sent him.

  I am the home monitor today.  The first two pages of order of service, under the description of the problem, I see:

  said c:CX dsnt unit turn on, only a power light flashes

  a: do you have a self test, no go, so informed the cs repair, cx agreed

  r: at the request of the unit for repair

  On the second page, I see this:

  Computer data. Accessories
  No accessories (No. Box)

  Software & other remarks:
  surface scratches, no power

  (Note to this poster: surface scratches?)  Where?  I treated this monitor as it was made of Crystal.)

  Diagnosis / repair:

  Reported problem not noted.  Monitor power towards the top with good screen, stable.  Monitor adopted system intensive burnin test over the weekend, more than 63 hours, without any problem.  At the end of the extensive, intensive, powered burnin test monitor then turn it several times; always under tension with a display of good and stable, no problems noted.  In the course of trials, powered monitor then turn it several times; always constantly lit with a good and stable display.

  ===============

  So, my friend has a supply for his Acer monitor (a smaller one) that has 19v and 2. 1 has, just like mine.  So I borrowed her power to test my monitor and I had the same problem: an orange power button flashing.

  So the question is: has anyone ever encountered this with Acer?  I'll call them, but I wanted to see if there was any opinions here at the same time.

  It seems that this has not worked for the first tester and launched up to more away for another tech fix, but when that tech he walks, it worked fine. I have been a mechanic my whole life, in many areas, and I saw this scenario several times. There is also the possibility that someone got lazy, but you can not prove it so just contact warranty service again and tell them that they must resume and attach it.

• launch of checkers problems: error: trying to re-launch your game. If the problem persists, it may be network with the server problems or a problem with the configuration of your firewall.

  Windows Vista can not launch problem of checkers: try to re-launch your game. If the problem persists, it may be network with the server problems or a problem with the configuration of your firewall. Please check your firewall settings by visiting the Open Ports FAQ.

  Original title: launch of the problems of checkers:

  Hello

  If you have not yet tried to disable the antivirus/firewall software, then try the following steps to disable them.

  Disable the anti-virus software: http://windows.microsoft.com/en-US/windows-vista/Disable-antivirus-software

  Enable or disable Windows Firewall: http://windows.microsoft.com/en-US/windows-vista/Turn-Windows-Firewall-on-or-off

  IMPORTANT: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks

• TV LCD W2607C with the same problem of power W2600

  My Dell W2607C LCD TV has even no power problem. I had less than 3 years and have had very good care of it. I stop it after watching some tv to go with dinner. Two hours later I tried to turn it on and I have nothing. Not even a blink on the LCD. Power LED turned blue, then blinked orange.

  A week ago, I finally called Dell customer service. Of course, I've been waiting for about 20 minutes. After giving all pertinent information about my Dell 26 '' LCD/TV, the operator (in English very hilly, I might add) guided me through all the troubleshooting steps I had done. None worked troubleshooting.

  She tried pulling the line 'contact your cable operator' old, but I told her that the cable is fine cause it is also plugged into a second TV. She then tried to explain since it was out of warranty he could not replace. I did not stay in there and started to explain how Dell sold me a defective product and that I have LCD screens and televisions last more than 2 years and how it was unfair for a loyal customer to treat them that way. She then tried to send me to another service of technical support, but the only difference is they were going to charge me. I said 'No' and then asked his supervisor.

  He tried to give the same line on 'out of warranty' and I told him that this is not an uncommon problem and if you google "Dell 26 '' TV does not turn on", he would see that there are a large number of consumers out there with the same problem as me.

  He then said, "Oh but the problem you have raised is the 2600 series model not yours, yours is the 2607C.» I answered, without hesitation, "but it is still part of the same series, is - not? And it seems that the same problem was overlooked when they made the one I bought. »

  I was told someone to a "higher authority" would contact me, but their calls have been rather erratic and I can't return their calls only leave voicemails. I get emails telling me how they just tried to call and when they say they would call between some time next, I end up wasting time to wait for a call that never comes.

  As a last resort, I post here in the hope that I get response and are not facing customers by service script.

  I ordered from Dell recently, his good faith. If I'm stuck with a very expensive paperweight, I might as well made my recent purchases and cut all ties with Dell completely.

  
  

• I bought a desktop computer and wanted to know if I am able to have creative clouds on this plan as well as my laptop with the same problem, I'm currently?

  I bought a desktop computer and wanted to know if I am able to have creative clouds on this plan as well as my laptop with the same problem, I'm currently?

  Your subscription license allows you to have two facilities activated, so if both machines meets the system requirements so you should be able to install and connect the two.

• I have a problem with the startup in windows xp

  OK, this is how it goes end-to-end.

  My brother is still using xp and one day, as his computer just took a dump...
  It starts, runs through the bios screen, then head to the start screen. As soon as there is almost no loading, a screen very very very very rapid rises. then it restarts... Well, the error, I discovered, was the unmountable boot volume error. Although it doesn't have the recovery disk for his computer... Is there a way can I fix?

  By the way I can't boot in any mode without failure or other way. I can't even a prompt back. I tried to use ubuntu, but I'm stumped on this review that I don't use on a daily basis, is close to 100%.

  FOR any help would be greatly appreciated.

  It's a shame that forums MS Answers do not ask for any information system when a new question is asked, because it knows absolutely nothing about your system (except it does not start).

  Not knowing the basic information a problem prolongs the frustration and the agony of these issues.

  For this error, I would like to start here:

  Use the XP Recovery Console to check the file system on your HARD drive and fix the problems and then try to start your system - this may be all you need to do.  Or, you are welcome to just start trying things that might work.

  Boot into the Recovery Console Windows using an XP bootable installation CD.

  If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and don't forget (no support for XP not necessary).

  This is not the same as recovery disks that might have come with the acquisition of the system store.

  You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

  The ISO bootable image file you need to download is called:

  xp_rec_con. ISO

  Download the ISO from here:

  http://www.mediafire.com/?ueyyzfymmig

  Use a new CD and this simple and free program to burn your ISO file and create your bootable CD:

  http://www.ImgBurn.com/

  When you install ImgBurn, DO NOT install the Ask toolbar.

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When you start on the CD, follow the instructions:

  Press any key to boot from CD...

  Installing Windows... going to pronounce.

  Press 'R' to enter the Recovery Console.

  Select the installation that you want to access (usually 1: C:\WINDOWS)

  You may be asked to enter the password (usually empty).

  You should be in the folder C:\WINDOWS.  It's the same as the

  C:\Windows folder that you see in Solution Explorer.

  The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

  For a list of the commands in the Recovery Console, type help at the prompt of commands or read on here XP Recovery Console:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/recovery_console_cmds.mspx?mfr=true

  A good idea before you start things must first verify the integrity of your file system by using the chkdsk command.

  In the command prompt window, run the chkdsk command on the drive where Windows is installed to try to fix any problems on the afflicted player.

  Running chkdsk is fine, even if he finds no problem.  It won't hurt anything to run it.

  Assuming your boot drive is C, run the following command:

  CHKDSK C: /r

  Let chkdsk finish to correct the problems, he could find.

  It may take a long time for chkdsk complete or they seem to be "stuck".  Be patient.  If the HARD drive led blinks always, chkdsk is something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.

  You must run chkdsk/r again until it finds no error to correct.

  Remove the CD, and then type "exit" to exit the RC and restart the computer.

  You have not to set the BIOS to boot the disk HARD since the CD won't be.

• I installed a freeware program called "truecrypt" and have a problem with the startup.

  I've since deleted, but when I start my computer it starts with the bootloader "truecrypt". I can start my computer, but only after I press "ESC" to bypass the boot loader. The bootstrapper calls the password I put in place, but forgot since. I can't find the files in windows. How to remove the bootstrapper?

  Hello

  You need to probably start with a Vista disk and run the Recovery Console, and then run a startup repair.

  Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org

• Loop continues with the Startup Repair tool

  Whenever I turn on my laptop (Dell Studio 17 which is using Windows Vista), it executes the Startup Repair and then says it can't find any solution to my problem so I click on finish and it stops. It never gets past that point. This problem has come completely out of the blue!  I have nothing connected to the USB ports, and I recently downloaded software or updates.

  The details of the problem are:

  Problem event name: StartupRepairV2

  Signature of the problem 01: AutoFailover

  "' 02: 6.0.6001.18000.6.0.6001.180000

  ««03: 2»»

  "'04: 65537.

  "' 05: unknown.

  «"06: CorruptFile»»

  ««07: 3221226021»»

  "" 08: 3

  «' 09: WrpRepair»»

  ""10: 1168.

  If there is a solution in which I lose any of my files, it would be greatly appreciated!

  Thank you

  I suggest you start troubleshooting with the following diagnostic tests.  They will save you a lot of time and grief if there is a hardware failure, and you have records on site in case you need it in the future:

  H/W Diagnostics:
  Please start by running the diagnostics bootable hardware:
  http://www.carrona.org/memdiag.html (read the details at the link)
  http://www.carrona.org/hddiag.html (read the details at the link)

  Post back with the results of the tests and we'll go from there. -John ( http://www.carrona.org/index.html )

• On the startup problem Autorun feature

  Hello

  I'm having a strange question, try to have my request to start the boot device.  I put the flag in the project settings and it would start to my application, but it would be sort of a State of 'sleep' - it will appear in the list of running applications, but in fact it does not work in the background until opened by the user.  I couldn't find any post on this forum describing a similar problem.  Do you have any idea what's going on?

  I write a simple application to test what's going on, but he died with 156 error - application is not responding.  It looks not to I'm blocking the event thread, so I don't know why it would not.

  Here is the code example.  Do you see something wrong?

  /*
   * AutoStart.java
   *
   * © , 2003-2008
   * Confidential and proprietary.
   */
  import java.util.Timer;
  import java.util.TimerTask;
  
  import net.rim.device.api.ui.*;
  import net.rim.device.api.ui.component.*;
  import net.rim.device.api.ui.container.*;
  import net.rim.device.api.system.ApplicationManager;
  
  /**
   *
   */
  class AutoStart extends UiApplication implements FieldChangeListener {
  
      private ButtonField mExitBtn;
      private LabelField mCntLabel;
  
      private Timer mTimer;
  
      private int mSecondCount;
  
      public static void main(String[] args) {
          System.out.println("AutoStart:  entered main()");
  
          ApplicationManager mgr = ApplicationManager.getApplicationManager();
  
          System.out.println("AutoStart:  waiting for system to initialize");
  
          while (mgr.inStartup()) {
              try {
                  Thread.sleep(2000);
              }
              catch (Exception e){}
          }
  
          AutoStart theApp = new AutoStart();
  
          System.out.println("AutoStart:  entering dispatcher");
  
          theApp.enterEventDispatcher();
      }
  
      AutoStart() {    
  
          System.out.println("AutoStart:  creating main screen");
  
          // MainScreen is the basic screen or frame class of the RIM UI.
          MainScreen mainScreen = new MainScreen();
  
          mainScreen.setTitle(new LabelField("AutoStart Test", 0));
  
          VerticalFieldManager vfm = new VerticalFieldManager();
  
          mCntLabel = new LabelField("0:00", Field.USE_ALL_WIDTH);
          vfm.add(mCntLabel);
  
          mExitBtn = new ButtonField("Quit", DrawStyle.HCENTER);
          vfm.add(mExitBtn);
  
          mExitBtn.setChangeListener(this);
  
          mainScreen.add(vfm);
  
          mTimer = new Timer();
  
          System.out.println("AutoStart:  scheduling timer");
  
          mTimer.scheduleAtFixedRate(new TimerTask(){
              public void run() {
                  timerEvent();
              }
          }, 1000, 1000);
  
          //show screen
          pushScreen(mainScreen);
      }
  
      private void timerEvent() {
  
          System.out.println("AutoStart:  timer event 1");
  
          UiApplication.getUiApplication().invokeLater(new Runnable() {
              public void run() {
  
                  System.out.println("AutoStart:  timer event 2");
  
                  ++mSecondCount;
  
                  int minutes = mSecondCount / 60;
                  int seconds = mSecondCount % 60;
  
                  String strMin = String.valueOf(minutes);
                  String strSec = String.valueOf(seconds);
  
                  if (strSec.length() == 1) {
                      strSec = "0" + strSec;
                  }
  
                  mCntLabel.setText(strMin + ":" + strSec);
              }
          });
      }
  
      public void fieldChanged(Field field, int context) {
          if (field == mExitBtn) {
              System.exit(0);
          }
      }
  }
  

  Words KushBB is in my opinion, incorrect.

  With the help of another entry is a solution often proposed, but also brings its own problems.  And in this case, it is not the reason for this problem.

  The problem here is that you are trying to do a job on the thread of events, specifically, you wait until the device is ready.  There was an article that made this kind of delay, but he did it in a background Thread.  You do this in main().

  I suggest instead to use this article that describes how do to wait until the device is ready to accept the interaction of your screen, without the wait loop.

  http://supportforums.BlackBerry.com/T5/Java-development/write-safe-initialization-code/Ta-p/444795

  This article presents similar information:

  http://supportforums.BlackBerry.com/T5/Java-development/detect-system-availability-on-startup/Ta-p/4...

  A lot of people will tell you you need to do your initialization using another entry.  This is not true.  There are good reasons to use another entry for this treatment, but it is not applicable in all cases and is certainly not in this case.

• Firefox 33.0.1 - rendering of the text with the acceleration problems hardware OR not.

  Hello, I have problems with Firefox render wrong text and other graphical problems, regardless of hardware acceleration.

  With hardware acceleration on, I have problems with "ghost text cursors" appearing in various parts of the interface, more particularly in the tabs next to the X button on each tab, but also the other sections of the interface as well. The text is returned to the appropriate thickness, but in some cases flashes back of fixes too thin (see below / stop) in sync with the speed of blinking text cursors.

  With disabled hardware acceleration, I have problems where the text in menus and Web pages is made too thin, making it extremely difficult to see. Issues and artifacts flashing disappeared, however.

  I use a NVIDIA GeForce GTX 750 Ti with the latest version of the driver (344,48).

  This only started happening around 33.0 version, maybe an earlier version (not 100% sure). I really want to look for and choose between what a crappy experience I'd rather have. I just want to how he used to, nice and clean and readable text. What can try to remedy?

  Try disabling OMTC and leave hardware acceleration in active Firefox.

  • layers.offmainthreadcomposition.Enabled = false

  You can open the topic: config page via the address bar.
  You can accept the warning and click on "I'll be careful" to continue.

  • http://KB.mozillazine.org/about:config

• I just bought an IPhone 6 Plus. When I get a text Message I get no advice or vibrations. I have all the settings correct. I know many others with the same problem with this phone. Any suggestions?

  I have just purchased IPhone 6 Plus. When I get a text Message I get no notification - no vibration and no noise. I put everything correctly. I know several others who have the same problems with this phone. Any suggestions?

  I have the same problem. You own an iPhone 6 Plus 2/9. Problems began the next day. Phone took over and got another new. Problems with another brand new! Volume is also impoverished - even when up until the end. Extremely frustrated! Any advice would be appreciated.

• FSX MULTIPLAYER DOES NOT HAVE MANY PEOPLE WITH THE SAME PROBLEM

  I have a FSX I've always used the multiplayer mode for online flight, now a few weeks ago its been not conect, my internet is good, everything works but is not multiplayer, many people with this problem, tell us how to find a solution, we really like this multiplayer game

  Hello

  Thanks for posting your query in Microsoft Communities.

  According to the description of the problem, it seems that you are not able to play Flight Simulator X multiplayer.

  Please go ahead and read the steps mentioned from the link and later a update on the State of the question.

  Microsoft Games: Multiplayer troubleshoot

  You can also stay in contact with the Flight Simulator with the help of the link and check if it helps.

  http://www.Microsoft.com/products/games/FSInsider/tips/pages/default.aspx

  I hope this helps. Let us know if you need more assistance.

• E3000 with the same problems on & more here, but no expert solution for the 2 main problems

  

  1 - with regard to support USB connected hard drives that will not transfer data & like to come & go quite often of the view.

  Everything seems like a joke to me, when I read that a lot of people have hard drives USB who worked for a year, & when it stops working or acts upward, we all have a test to see if it connects & works very well on our other connections PC/Laptop & the only advice given, this firmware is upgraded or a list of hard drives that have been tested and work on the E3000.

  2nd - my other problem is that my E3000 now decides of its own to disconnect wireless & cable Communication and then reconnect alone, whenever you feel.

  What makes angry of this problem is that it is abundant in the Forums & I tried all the fixes, but I still have the same problem & sound as good as this device of 2 year, Max is grilled.  As is the case when there is a loose connection that overheated, in what thread or welded metal move when heat is added & move at the time where the heat is removed.

  PROBLEM:

  My touch 1 Maxtor (from the approved list) is connected and playing now you see me & now you don't game.  If I ever try to import or to export any image file or music, the Communication goes & then sometimes will return its own. Working with Game Consoles, when something begins to work intermittently, then it is a hardware problem or software with the device.  It is not a user error, when it worked fine before.

  SOLUTION?:  This is why we are all here. Thanks to a landmark of expert for the same problem that many of us have?

  How about this solution. Why not let all E3000 owners send there wireless routers is not working towards a credit for a new operating model nice. I think that we would all save a lot of headaches & get rid of 25% of all calls for help on this forum.

  Thank you for your attention,

  BigdogTim7

  PS. Please give us/me expert advice on how to solve the problem.  If nobody knows the answer, then Cisco/Linksys looks really bad for selling a router high of $$$, being touted for the games and files sharing multimedia home & it only at this stage.  If it should be recalled, will bring up by all means, or come up with a fully functional firmware.

  Thanks again & hope to hear news good & productive, cause I am so tired of playing with this E3000 & will more than likely stay away from your product for any & all future purchases, no matter where you are ranked (E3000 was 3rd & best prices of the top 3 when I bought it).

  Well, I'm here, not having heard an assumption about my problem, but to get an opinion of experts & solution to my problem, but also all other users of the same or very similar problems.

  I am now a HAPPY 'Belkin N600 DB' owner for only $79.99 @ Wal-Mart/Radio Shack. This new does much more than the Cisco E3000 wireless router & even changed my Modem 100 MB (green) flow out of 1000 GB (Amber Light).

  So, so HAPPY now!

  Bigdogtim7

• Scanner HP Scanjet 5590 Digital Flatbed, with the installation problem

  Hi guys,.

  How are you?

  I need to install the complete software driver Scanner flat digital HP Scanjet 5590 on a windows 7 PC, but it shows that the access is denied error. All PC's are in the area. I already tried installing both domain admin account but got the same error.

  Note: The base hp scanjet 5590 digital flatbed driver works ok, but with the installation of the complete software driver it shows that access is denied error.

  No problem in driver full installer on other PC with the same configuration and settings.

  Please find attached screenshots of the error and the system configuration.

  Thank you & best regards

  Arun Vergnaud

  

  

  Hi Arun,

  Thanks for posting your query on the Microsoft Community.

  According to the description, I understand that you can not install the printer.

  I suggest you re-post your query on The TechNet Forums because we have experts working on this type of questions and for you help the better.

  Check out the link:

  https://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w7itpro

  Hope this information helps. Please let us know if you need any other help with Windows in the future. We will be happy to help you.